CrawlJobs Logo
TDX Logo TDX · IT - Administration

Electronic Engineer

Germany, Spangdahlem · Job Posted June 16, 2026
Apply Position
Job Link Share

Job Description

This job, Spangdahlem AB, Germany, requires the physical capability to lift, maneuver, and carry ACTS pods in a variety of environments, including shop, warehouse, bay, and flight-line

Job Responsibility

  • Schedule and perform periodic, preventive, and corrective Airborne Subsystem (Pod) maintenance (including ancillary equipment)
  • Respond to notification of malfunctioning Airborne Subsystems/pods, including applicable ancillary equipment, as well as Range Remote Unit (RRU) functions
  • Assist with GS/LM/RRU maintenance as required
  • Troubleshoot and repair to restore the AS/pods and RRUs to full functionality
  • Perform system installation, preparation for use and reshipment
  • Identify and report corrections/improvements to technical data
  • Identify and report product quality/material deficiencies
  • Identify and report supply discrepancies
  • Transport, install, and remove Pods, including ancillary equipment
  • Verify proper subsystem electro-mechanical interfaces with aircraft
  • Conduct inventories and maintain accountability records for Airborne Subsystems/pods, including ancillary and support equipment
  • Comply with inspection requirements and implement approved configuration changes
  • Perform equipment status reporting, as well as maintenance data collection/job documentation
  • Conduct Airborne Subsystem training, including ancillary and support equipment
  • maintain/update training documentation as required
  • Perform corrosion prevention and control
  • Monitor Facilities, Technical Publications, Supply Accounts/Bench Stock, Monitor Support Equipment, Monitor Tools, and Vehicles
  • Ensure compliance with BSEn Quality Control and Safety Programs
  • Other duties as assigned

Requirements

  • High School Diploma and successful completion of an accredited Technical Apprentice Program in Electronics or equivalent military training
  • Associate's degree in Electronics and experience at the Craftsman level
  • Three (3) years Air Combat Maneuvering Instrumentation (ACMI) or Air Combat Training Systems (ACTS) experience
  • Six (6) years’ experience at the journeyman level
  • Flight line experience
  • This job requires the physical capability to lift, maneuver, and carry ACTS pods in a variety of environments, including shop, warehouse, bay, and flight-line
  • US Citizen // Secret Clearance or ability to obtain
  • Must pass TESA (Technical Expert Status Accreditation)
  • Must have a U.S. Passport and appropriate visas
  • Applicants must have a valid state driver’s license and meet requirements for a flight-line driving permit
  • Must be able to travel to other countries in support of TDY operations
  • Ability to speak, read, and write English

What we offer

  • health
  • dental
  • vision
  • 401K
TDX - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Electronic Engineer

8 matching positions

Electronic Engineer

The Electronic Design Engineer will be responsible for designing, developing, an...
Location
Location
United Kingdom , Bracknell
Salary
Salary:
60000.00 GBP / Year
zenovo.co.uk Logo
Zenovo
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum 3 years’ commercial experience in electronic/hardware design
  • Degree in Electronic Engineering or a related discipline
  • Proficiency with schematic capture and PCB layout tools
  • Strong knowledge of analogue & digital electronics
  • Experience with prototype testing and troubleshooting using lab equipment
  • Understanding of EMI/EMC considerations and good design practices
  • Must be a UK Passport Holder
Job Responsibility
Job Responsibility
  • Taking design projects from the specification stage through to production
  • Design, simulate, and verify analogue and digital electronic circuits
  • Produce engineering documentation including schematics, BOMs, test procedures, and reports
  • Support prototype builds, testing, debugging, and verification
  • Ensure designs meet relevant performance, safety, and EMC standards
  • Participate in design reviews and contribute to design improvements
What we offer
What we offer
  • Performance Related Bonus
  • Enhance Employer Pension Contributions
  • Healthcare
  • EV Car Scheme
  • Fulltime
Read More
Arrow Right

Electronic Engineer

Join our dynamic team as an Electronic Engineer specializing in Qucs-S. In this ...
Location
Location
India , Noida
Salary
Salary:
Not provided
aqusag.com Logo
AquSag Technologies
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Proven expertise with Qucs-S for electronic circuit simulation and analysis
  • Bachelor’s or Master’s degree in Electronic Engineering or a related field
  • Demonstrated experience in electronic circuit design, testing, and optimization
  • Exceptional written and verbal communication skills, with attention to clarity and detail
  • Strong problem-solving abilities and a proactive approach to technical challenges
  • Ability to work independently in a remote setting and collaborate effectively with distributed teams
  • Experience creating comprehensive technical documentation
Job Responsibility
Job Responsibility
  • Design, simulate, and validate electronic circuits and systems using Qucs-S
  • Develop detailed technical documentation and present findings to both technical and non-technical stakeholders
  • Collaborate with cross-functional teams to translate project requirements into robust electronic solutions
  • Optimize circuit designs for performance, reliability, and manufacturability
  • Troubleshoot, analyze, and resolve issues arising during simulation or prototyping phases
  • Stay current with Qucs-S updates, integrating the latest features and best practices into projects
  • Mentor team members on Qucs-S best practices and advanced simulation techniques
  • Fulltime
Read More
Arrow Right

Electronic Engineer

We are seeking an Electronic Engineer to work with us to perform the troubleshoo...
Location
Location
United States , Lewisville
Salary
Salary:
Not provided
ericsson.com Logo
Ericsson
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electronic Engineering, Electrical Engineering, or a related field
  • 3+ years of experience as an Electronic Engineer, Electrical Engineer, or related in hardware design in RF Engineering or board level design
  • Experience in electrical component level troubleshooting and fault analysis
  • Project management with technical personnel training and mentoring.
  • Collaboration with external teams: quality, design, and manufacturing.
Job Responsibility
Job Responsibility
  • Perform the troubleshooting and repair of new 5G (and future generation) cellular radios
  • Mentor and guide electronic troubleshoot technicians concerning hands-on electronic circuit board debugging and systematic root cause analysis.
  • Establish processes and techniques to increase troubleshooting velocity along with efficacy of repair.
  • Analyze and identify radio product defect trends using data analysis tools.
  • Utilize root cause analysis to increase production efficiency and improve product quality through investigation.
  • Write Python scripts to communicate and troubleshoot the radio at the bench along and SQL scripts to automate product location management.
  • Research and collaborate with factory engineers to find new ways to increase radio throughput and repair velocity.
What we offer
What we offer
  • Choice of three medical plan options
  • Dental plan option
  • Company credits for medical and dental premiums
  • Ericsson US 401(k) Plan offers an automatic 3% company contribution and matching contributions
  • Company credits for basic life insurance and basic accidental death and dismemberment coverage, as well as short-term and long-term disability coverage
  • Option to participate in Ericsson’s Stock Purchase Plan
  • Minimum of 15 days of accrued vacation
  • Up to 3 personal days per year
  • 11 annual holidays
  • 8 hours of volunteer time
Read More
Arrow Right

Functional Safety Engineer – Electronic Engineer

TQM Holding is an independent consulting company headquartered in Turin that sin...
Location
Location
Italy , Turin
Salary
Salary:
Not provided
tqm.it Logo
TQM HOLDING
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Master Degree/MSc: Electrical Eng/Automotive Eng/Aerospace Eng/Electrical Eng, Electronics Eng/Informatics
  • Languages: full professional proficiency in Italian and English, French is a plus
  • Communication skills: able to speak to stakeholders at varying levels in an organisation. Careful listening
  • Organisational skills: high attention to detail and ability to work independently and efficiently on tasks, escalating when needed
  • Project Management skills: able to participate actively to the creation of implementation plans for solution delivery on client’s projects
  • Client-oriented: You fully understand the urgency of action for the client
  • Self-management skills: Ability to manage assigned projects and create your own agenda with due lookahead and flexibility
  • A true passion for problem-solving is a MUST
Job Responsibility
Job Responsibility
  • Start immediately working on clients’ most challenging projects, at their premises, with their personnel and touch first-hand the leading-edge of today’s top manufacturing, innovating technology application, and data management
What we offer
What we offer
  • All the applicable benefits in accord with the national sector contract
  • Fulltime
Read More
Arrow Right

Quality Engineer (Electronic Products)

As a Quality Engineer, a successful applicant will be responsible for leading qu...
Location
Location
United Kingdom , Swindon
Salary
Salary:
40000.00 - 50000.00 GBP / Year
zenovo.co.uk Logo
Zenovo
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 2+ Years experience in Quality Engineering or Manufacturing Quality Engineer Role (within a manufacturing environment)
  • Proven experience leading end-to-end customer complaint resolution, including preparing and confidently presenting 8D reports
  • Solid working knowledge of quality tools and methodologies, with strong root cause analysis capability
  • Effective stakeholder management skills, with the ability to collaborate across Engineering, Manufacturing, Supply Chain, suppliers, and customers
Job Responsibility
Job Responsibility
  • Act as the main quality contact for assigned customers, owning issues from initial complaint through investigation, resolution, and closure
  • Lead customer communication, ensure timely updates, and translate customer requirements into clear internal actions
  • Coordinate failure analysis and product returns, driving containment, root cause analysis, and effective corrective actions using structured tools (e.g., 5 Whys, Fishbone, Pareto)
  • Prepare and present high-quality 8D reports and ensure solutions prevent recurrence
  • Monitor customer quality KPIs and cost of poor quality (COPQ), using data to prioritise actions and escalate repeat issues
  • Feed lessons learned into process improvements, control plans, and prevention activities
  • Work with suppliers and internal teams to resolve quality issues, manage nonconformances, support audits, and review process changes for customer impact
  • Contribute to product launches, support risk reviews, and mentor junior team members to strengthen overall quality performance
  • Fulltime
Read More
Arrow Right

Sr. Electronic Engineer

Trimble is looking for a passionate problem-solver like you to architect and val...
Location
Location
United States , Dayton
Salary
Salary:
115600.00 - 158900.00 USD / Year
trimble.com Logo
Trimble Inc.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Master of Science in Electrical Engineering (MSEE) or a Bachelor’s Degree (BSEE) with equivalent experience
  • 5+ years of exposure to electronic circuit design, research, and debugging for embedded systems and sensors, with a strong focus on IMUs
  • robust expertise in analog and exposure to digital electronic circuit design, component research, and risk mitigation strategies
  • proven track record working with Inertial Measurement Units (IMUs), specifically with accelerometers and gyroscopes
  • strong communicator capable of writing technical specifications and presenting to customers and cross-functional stakeholders
  • experience designing Functional Safety products or transferable experience
  • proficiency in Matlab and SPICE (PSpice) simulation software, alongside familiarity with C and C++ firmware development
Job Responsibility
Job Responsibility
  • IMU System Design & Hardware Engineering - Circuit Design & Analysis: Architect and implement PCB-level sensor interface circuitry, including power regulation, EMI shielding, and noise isolation tailored for harsh environments
  • Sensor Selection & Evaluation: Select, evaluate, and qualify IMU hardware components (accelerometers, gyroscopes, magnetometers) from external vendors against strict performance criteria (bias stability, noise density, vibration tolerance)
  • Algorithmic Integration: Support the development of signal conditioning, filtering (Kalman, complementary, Madgwick), and sensor fusion middleware to deliver accurate orientation data
  • Calibration, Testing & Validation - Test Procedures & Fixtures: Design and comprehensive validation test plans covering static/dynamic accuracy, thermal cycling, vibration endurance, and environmental testing
  • Data Analysis: Utilize simulation and analysis tools to evaluate design performance and drive iterative improvements
  • Production Readiness: Define factory and in-field calibration procedures. Generate Engineering Change Notices (ECNs) and design production-level test fixtures to support the successful transition of products to manufacturing
  • Technical Non Managerial Leadership, Compliance & Documentation - Technical Leadership: Assume a leadership role in resolving complex technical problems. Provide technical guidance and mentorship to junior engineers and technicians
  • Regulatory & Standards Compliance: Ensure designs comply with Functional Safety standards ISO 19014 and IEC 65108, CE/FCC/IC certifications, and OEM-specific guidelines. Support safety analyses such as FMEA
  • Documentation & Lifecycle Management: Produce and maintain high-quality circuit schematics, Bills of Materials (BOM), wiring harness specifications, and test reports
  • Stakeholder Communication: Lead and contribute to internal design reviews and present technical updates, program status, and design concepts to customers and cross-functional stakeholders
What we offer
What we offer
  • Medical
  • Dental
  • Vision
  • Life
  • Disability
  • Time off plans
  • retirement plans
  • tax savings plans for health, dependent care and commuter expenses
  • Paid Parental Leave
  • Employee Stock Purchase Plan
  • Fulltime
Read More
Arrow Right

Technical Operations Engineer, Electronic Warfare

Anduril’s Deployment Operations group is seeking a Technical Operations Engineer...
Location
Location
United States , Costa Mesa
Salary
Salary:
113000.00 - 155000.00 USD / Year
anduril.com Logo
Anduril Industries
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 3+ years of experience of strong problem solving in unstructured environments at the interface of hardware, software, and networking
  • Ability to climb towers to install, maintain, and repair sensor equipment and components including cameras, radars, and Pan Tilt Units (PTU)
  • Strong mechanical aptitude to troubleshoot and repair critical site infrastructure including generators, solar power systems, and hydraulic systems
  • Experience performing preventative maintenance on tower structure components including guy wires, anchors, lightning protection systems and other structural elements to ensure structural integrity and safety
  • Ability to meet health and medical requirements in advance of deployments in accordance with DFARS 252.225-7040, DoDI 3020.41, and/or any additional requirements outlined by region or supporting force, as applicable
  • Ability to travel to remote regions of the world for up to two months at a time (up to 80% of the year)
  • Ability to relocate, if not already local to be onsite in Costa Mesa, CA
  • Eligible to obtain and maintain a U.S. Top Secret/Secret clearance
Job Responsibility
Job Responsibility
  • Support military air defense projects by executing technical operations, conducting field maintenance, providing customer field support and training
  • Tackle complex issues related to hardware, software, and networking in unstructured situations, driving them to resolution
  • Communicate field issue status to internal and customer teams, keeping them informed
  • Support the development and implementation of comprehensive operational and logistical plans for various events
  • Ensure high availability and performance of air defense systems
  • Maintain support plans for hardware and software
  • Assist in event planning and resource allocation, keeping key stakeholders informed about Technical Operations requirements
  • Incident response root-cause analyses (RCAs) for defense systems in the field
  • Conduct post-incident reviews and implement preventive measures
  • Maintain up-to-date documentation
What we offer
What we offer
  • Comprehensive medical, dental, and vision plans at little to no cost to you
  • Income Protection: Anduril covers life and disability insurance for all employees
  • Generous time off: Highly competitive PTO plans with a holiday hiatus in December. Caregiver & Wellness Leave is available to care for family members, bond with a new baby, or address your own medical needs
  • Family Planning & Parenting Support: Coverage for fertility treatments (e.g., IVF, preservation), adoption, and gestational carriers, along with resources to support you and your partner from planning to parenting
  • Mental Health Resources: Access free mental health resources 24/7, including therapy and life coaching. Additional work-life services, such as legal and financial support, are also available
  • Professional Development: Annual reimbursement for professional development
  • Commuter Benefits: Company-funded commuter benefits based on your region
  • Relocation Assistance: Available depending on role eligibility
  • Traditional 401(k), Roth, and after-tax (mega backdoor Roth) options
  • Fulltime
Read More
Arrow Right

Electronic engineer (Ngspice expert)

We are seeking a highly skilled Electronic Engineer with deep expertise in Ngspi...
Location
Location
India , Noida
Salary
Salary:
Not provided
aqusag.com Logo
AquSag Technologies
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Proven hands-on expertise in Ngspice and electronic circuit simulation
  • Bachelor’s or higher degree in Electronic Engineering or a related technical discipline
  • Strong foundation in analog and digital circuit design principles
  • Demonstrated experience in developing, testing, and optimizing simulation models for complex electronic systems
  • Excellent written and verbal communication skills, with an ability to convey complex information clearly
  • Proficiency in technical documentation and reporting
  • Self-motivated, detail-oriented, and comfortable working independently in a remote setting
Job Responsibility
Job Responsibility
  • Develop, analyze, and optimize electronic circuit simulations using Ngspice for AI training workflows
  • Collaborate with AI engineers and data scientists to translate hardware requirements into robust simulation models
  • Create comprehensive documentation to ensure knowledge transfer and reproducibility of simulation processes
  • Contribute technical expertise throughout the project lifecycle, from initial design to validation and optimization
  • Troubleshoot and resolve issues in electronic circuits and simulation scripts efficiently
  • Maintain up-to-date knowledge of electronic simulation methodologies and recommend best practices for continuous improvement
  • Communicate complex technical concepts clearly and effectively, both in writing and verbally, to interdisciplinary teams
  • Fulltime
Read More
Arrow Right