CrawlJobs Logo
Hewlett Packard Enterprise Logo Hewlett Packard Enterprise · Manufacturing

Electronic Assembly

United States, Chippewa Falls 16.44 - 34.81 USD / Hour · Job Posted February 16, 2026
Apply Position
Job Link Share

Job Description

This role has been designed as ‘’Onsite’ with an expectation that you will primarily work from an HPE office. Responsible for the development and implementation of activities in product area(s) to meet production, quality, cost and predictability goals for production sites. Responsible for performing varied and general tasks involved in the manufacturing process. These tasks may include, but are not limited to at the non-exempt level, basic manufacturing assembly; installation or processing of components, subsystems or systems; operation of basic hand tools and assigned production or manufacturing machinery; compiling data for reports; work may be internal and possibly external to the company. At the exempt level, may be responsible for customer design and software utilization.

Job Responsibility

  • Performs varied and general tasks of a transactional nature involving the manufacturing process while using independent judgment
  • Follows detailed documentation and instructions to execute a variety of process-oriented tasks such as testing, inspecting or advanced rack building
  • Identifies simple to complex areas for process improvement and seeks limited guidance for resolution
  • Supports the training of new employees
  • Operates multiple machines and simultaneously supports quality assurance
  • Controls and uses machinery and tools
  • chooses correct processes and programs to run, such as pulling queries and executing appropriate assignments
  • Assists with products well into maturity life-cycle
  • Responsible for auditing materials and builds for quality assurance
  • Coordinates tasks within a team
  • Understands and executes to customer expectations, e.g., Customer to Order (CTO) expectations

Requirements

  • Associate degree preferred or equivalent experience
  • Typically 2-4 years of experience in manufacturing operations
  • Fluency in English and local language
  • Very strong mathematics and reading comprehension skills
  • Demonstrated physical capability (e.g., manual dexterity)
  • Excellent understanding of how to navigate tools and procedures
  • Very strong written and verbal communication skills
  • Very strong teamwork and coordination skills
  • Strong multi-tasking ability
  • Strong technical knowledge specific to business function and segment
  • Basic computer software skills

What we offer

  • Health & Wellbeing
  • Personal & Professional Development
  • Unconditional Inclusion
Hewlett Packard Enterprise - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Electronic Assembly

8 matching positions

Electronic Assembly Process Engineer

The person will manage the manufacturing operations that include key processes s...
Location
Location
United States , Atlanta
Salary
Salary:
Not provided
scanfil.com Logo
Scanfil
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree in Electronic Engineering and/or 5+ years of prior relevant experience
  • Experience working with a Contract manufacturer of complex electro-mechanical systems
  • Possess knowledge and experience with the manufacturing, inspection, and acceptance of Electro-mechanical systems and/or Printed Circuit Boards of varying complexities
  • Direct knowledge of Manufacturing processes and supply chain logistics from raw material to finished goods
  • Work with internal process owners and suppliers to develop manufacturing processes, build instructions, and oversee supplier production runs
  • Support all aspects of electronic and mechanical assembly, including Surface Mount Technology (SMT), through-hole assembly, convection reflow, wave solder, hardware installation, cleaning, conformal coating, potting and box build
  • Resolve manufacturing and process issues
  • Develop, qualify, and document assembly steps and manufacturing processes to fit the requirements of all products
  • Support Supply Chain with analysis of alternate electrical components and commodity management
  • Identify, design, procure, and validate assembly and test fixtures & tools. Support assembly and test equipment selection process to meet production plans
Job Responsibility
Job Responsibility
  • Manage the manufacturing operations that include key processes such as Hand assembly, PCBA (SMT and through-hole), cable and box build assembly
  • In addition to manufacturing engineering responsibilities, there will be opportunity for some design engineering work (electrical and mechanical)
Read More
Arrow Right

Electronic Assembly 2nd Shift

This role has been designed as ‘’Onsite’ with an expectation that you will prima...
Location
Location
United States , Chippewa Falls
Salary
Salary:
16.44 - 34.81 USD / Hour
https://www.hpe.com/ Logo
Hewlett Packard Enterprise
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associate degree preferred or equivalent experience
  • Typically 2-4 years of experience in manufacturing operations
  • Fluency in English and local language
  • Very strong mathematics and reading comprehension skills
  • Demonstrated physical capability (e.g., manual dexterity)
  • Excellent understanding of how to navigate tools and procedures
  • Very strong written and verbal communication skills
  • Very strong teamwork and coordination skills
  • Strong multi-tasking ability
  • Strong technical knowledge specific to business function and segment
Job Responsibility
Job Responsibility
  • Performs varied and general tasks of a transactional nature involving the manufacturing process while using independent judgment
  • Follows detailed documentation and instructions to execute a variety of process-oriented tasks such as testing, inspecting or advanced rack building
  • Identifies simple to complex areas for process improvement and seeks limited guidance for resolution
  • Supports the training of new employees
  • Operates multiple machines and simultaneously supports quality assurance
  • Controls and uses machinery and tools
  • chooses correct processes and programs to run, such as pulling queries and executing appropriate assignments
  • Assists with products well into maturity life-cycle
  • Responsible for auditing materials and builds for quality assurance
  • Coordinates tasks within a team
What we offer
What we offer
  • Health & Wellbeing
  • Personal & Professional Development
  • Unconditional Inclusion
  • Fulltime
Read More
Arrow Right

Electronic PCB Assembly Operator

Racing Force Group, a world leader in motorsport safety equipment, is looking fo...
Location
Location
Italy , Pisa
Salary
Salary:
Not provided
racingforce.com Logo
Racing Force
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Previous experience in electronic PCB assembly
  • Experience in cable assembly on miniature connectors
  • Good manual dexterity and attention to detail
  • Residence within a reasonable commuting distance of the company
  • Fulltime
Read More
Arrow Right
New

Custom Switchboard Mechanical Assembler

Custom Switchboard Mechanical Assembler (Experienced) Reporting to the Producti...
Location
Location
Canada , Milton
Salary
Salary:
21.00 - 23.00 CAD / Hour
https://www.randstad.com Logo
Randstad
Expiration Date
July 07, 2026
Flip Icon
Requirements
Requirements
  • High aptitude for mechanical work
  • Able to visualize and plan the assembly of a switchboard structure, based on engineering schematics and electrical drawings
  • Very experienced with the use of power tools, hardware, ladders and pallet trucks
  • Excellent attitude and commitment to quality, safety, continuous improvement and teamwork
  • Strong work ethic to keep up with production demands
  • Functional with computers, in order to use a variety of digital business tools (email, electronic models, eLearning modules)
  • Able to read, write and speak basic English without help from an interpreter
  • High School Diploma or equivalent
  • able to pass a background check to this effect
  • Minimum 2 years experience in mechanical assembly using power tools
Job Responsibility
Job Responsibility
  • Build large switchboard structures and subassemblies using pre-fabricated metal parts (steel and copper), following engineering schematics and electrical drawings
  • Mount and brace horizontal and vertical bus, risers and bus supports inside structures in sequential order
  • Use a variety of manufacturing equipment, high power torque tools, jigs/fixtures and fabrication machines such as punch presses and band saws
  • Construct pallets following engineering design requirements
  • Ensure strong assembly fundamentals are used at all times (ie., use of proper hardware, applying correct torque, using consistent fastening methods, checking tool calibration)
  • Identify design issues in mechanical and electrical schematics and raise them through the correct channels
  • Visually inspect parts and material before and after assembly for conformance to drawings, quality standards and customer specifications, and make mechanical adjustments as needed
  • Check parts picked/delivered to those required using the bill of materials, resolving issues with the Team Lead
  • Repair or rework issues detected during the inspection/test stage of the job
  • Cross-train and backfill other employees/job functions when necessary
What we offer
What we offer
  • Opportunity for permanent hire upon successful placement with Randstad Canada
  • Full-time hours with opportunity for overtime
  • Entry level position into an organization with opportunity for career development
  • Weekly pay via Randstad Canada
  • Fulltime
!
Read More
Arrow Right
New

Quality Engineer III - Hardware Test

The Quality Engineer - Hardware Test is responsible for executing hardware level...
Location
Location
United States , Farmington Hills
Salary
Salary:
Not provided
siriusxm.com Logo
SiriusXM
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in computer science, software engineering, electrical engineering or equivalent
  • Minimum 3+ years engineering experience
  • Competency in Word, Excel, PowerPoint and Adobe/Acrobat
  • Experience in ticket creation/bug tracking tools (Bugzilla, JIRA, etc.)
  • Experience with git, or similar software repository / source control
  • Scripting language experience is preferred (Ruby, Perl, Python, DIAdem)
  • PC hardware architecture and troubleshooting, including Ethernet, USB, etc.
  • Experience in CPLD/FPGA code development
  • Familiarity with hardware-level debugging tools such as Oscilloscopes, Spectrum Analyzers, Logic Analyzers, Signal Generators, DMM, Power Meters, Noise Figure Meters and Network Analyzers
  • RTL coding and simulation in Verilog/VHDL
Job Responsibility
Job Responsibility
  • Work within the SiriusXM hardware test / Hardware Type Acceptance group together with our product development and applications engineering teams to determine and ensure compliance to hardware performance and behavior requirements
  • Define, implement and maintain backend automated test suites for unique hardware test cases
  • Conduct QA testing, collect data, and compile reports using LabVIEW and DIAdem environments, which drive engineering test hardware and test execution
  • Perform hardware Type Acceptance testing including SiriusXM customer radio hardware, satellite receiver module, and antenna
  • Perform DVP&R testing related to environmental and durability qualification of SiriusXM vehicle OEM receiver modules
  • CPLD device development work related to Hardware Type Acceptance and OEM receiver module and DVP&R test interface boards
  • Solve automation challenges and work on projects with minimal supervision
  • Set and review script quality standards and practices
  • Perform automated tests, works with Product Development and Applications Engineering teams to triage test results
  • Identify any potential quality issues per defined process and escalate potential quality issues immediately to management
  • Fulltime
Read More
Arrow Right
New

Industrial Machinery Technician

Tu aimes la mécanique lourde? Tu recherches un nouveau défi ? Rejoins NLMK Clabe...
Location
Location
Belgium , Ittre
Salary
Salary:
20.02 EUR / Hour
https://www.randstad.com Logo
Randstad
Expiration Date
July 15, 2026
Flip Icon
Requirements
Requirements
  • minimum two years of experience in a similar function
  • knowledge of hydraulics and pneumatics
  • willingness to work in continuous shifts: 4 mornings, 4 afternoons, 4 nights, and 4 days of rest
  • experience in heavy industry
  • ability to make decisions alone in technical emergencies
  • staying up-to-date with new diagnostic methods and industry developments
Job Responsibility
Job Responsibility
  • Ensure scheduled preventive maintenance on the entire production tool (mechanical, high-pressure hydraulic, pneumatic components, as well as electrical and electronic elements)
  • Intervene as first line on complex installations for troubleshooting and corrective maintenance
  • Carry out assembly, disassembly, and mechanical adjustment work on demand to optimize production lines
  • Guarantee safety on site by rigorously performing lockout and tagout operations before each intervention
  • Analyze mechanical diagrams to identify root cause of breakdowns
  • Perform inspections, greasing, and replacement of wear parts according to maintenance schedule
  • Ensure each intervention takes place in full compliance with NLMK safety standards
  • Fulltime
Read More
Arrow Right
New

Assembly Worker

As an assembly worker in this high-end department, you are engaged in precision ...
Location
Location
Netherlands , Echt
Salary
Salary:
2900.00 - 3300.00 EUR / Month
https://www.randstad.com Logo
Randstad
Expiration Date
June 14, 2027
Flip Icon
Requirements
Requirements
  • MBO working/thinking level
  • Good command of the Dutch or English language
  • Available for at least 32 hours per week
  • Work very accurately
  • Looking for long-term work
  • Experienced in assembly
Job Responsibility
Job Responsibility
  • Precisely mounting and assembling small, expensive electronic applications
  • Contributing ideas regarding the engineering and processes of the products
  • Constantly and thoroughly checking your own work
What we offer
What we offer
  • Salary of € 2,900 - € 3,300 gross per month
  • Block times 09:00-15:30 and a total day of 8 hours
  • ADV days
  • Pension accrual from day 1
  • Friendly team, pleasant working atmosphere
  • Guidance, coaching and opportunities to develop
  • Randstad also offers training opportunities
  • Overtime pay if you work more than 40 hours
  • Fulltime
Read More
Arrow Right
New

Electrician - Yosemite - Facility Maintenance

The Electrician executes projects and work orders by installing, maintaining, te...
Location
Location
United States , Yosemite National Park
Salary
Salary:
33.74 USD / Hour
aramark.co.uk Logo
Aramark UK
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 1-3 years' experience in a process driven electrical maintenance position required
  • Must have the ability to read drawings and blueprints and interpret specifications
  • Must have the ability to understand and apply industry standards for installation, repairs, and safety
  • Demonstrates interpersonal and communication skills, both written and verbal
Job Responsibility
Job Responsibility
  • The Electrician executes the timely and correct performance of scheduled assignments, work requests and projects
  • Maintains a friendly, efficient, and positive customer service attitude toward customers, clients, and co-workers
  • Anticipates and responds to customer needs
  • Reads and interprets drawings, blueprints, schematics, and electrical code specifications to determine correct layout and troubleshoot industrial electrical equipment installations
  • Installs, examines, replaces, or repairs electrical wiring, receptacles, switch boxes, conduits, feeders, Ethernet and coaxial cable assemblies, lighting fixtures and other electrical components
  • Tests electrical and electronic equipment and components for continuity, current, voltage and resistance
  • Maintains, repairs, installs and tests switchgear, transformers, switchboard meters, regulators, and reactors
  • Conducts preventive maintenance programs and keeps maintenance records
  • May install, maintain and calibrate industrial instrumentation and related devices
  • Researches and specifies repair parts from manuals and computer sources
What we offer
What we offer
  • medical
  • dental
  • vision
  • work/life resources
  • retirement savings plans like 401(k)
  • paid days off such as parental leave and disability coverage
  • Fulltime
Read More
Arrow Right