CrawlJobs Logo
Formlabs GmbH Logo Formlabs GmbH · Manufacturing

Electromechanical Test Engineer

China, Dongguan · Job Posted December 08, 2025
Apply Position
Job Link Share

Job Description

The Electromechanical Test Engineer will focus on improving yields and efficiency of our in-line test routines. This engineer will work with our suppliers and engineers to help debug failures and provide solutions in NPI.

Job Responsibility

  • Troubleshoot and explain Formlabs defined test functions to our manufacturing partners
  • Support new product development by ensuring that designs have been reviewed by our manufacturing partners for manufacturability (DFM), test (DFT), and that processes and procedures are adhered to in relation to quality, method, and cost
  • Work with EMS suppliers to define and implement manufacturing tests for electrical hardware and software at the board level, module level and system level
  • Monitor product/system tests on site at our manufacturing partners
  • Create and maintain test documentation (procedures, processes, tools, etc) and work with Formlabs Factory Software team to debug and troubleshoot new tests
  • Work to reduce test cycle times via process improvement and test optimization
  • Support installation and bring up of test related hardware and computers
  • Write queries to help support manufacturing yield dashboards and data collection
  • Assist in developing and updating test documents and standard operating procedures

Requirements

  • Bachelor's degree in electrical engineering or equivalent with 5+ years experience
  • Demonstrated technical skills, including experience in manufacturing process debug, mechanical design, or process qualification
  • Strong programming skills with SQL and Python and experience in developing scripts and tools
  • Experience in Linux (Ubuntu)
  • Work in a high dynamic, fast paced environment. Able to distill ambiguous goals into focused tasks
  • Strong English technical communication and organizational skills
  • Demonstrated ability to collaborate with cross functional teams to solve complicated problems
  • Extensive experience working as the direct interface to contract manufacturers with new product introductions is required
  • Experience in test methodologies and designing custom fixtures and test equipment for manufacturing end of line testing for electromechanical products is required

Nice to have

  • Prior experience working with electromechanical products, consumer products, or industrial automation is a plus
  • Passion for 3D printing and emerging technologies
  • Experience in rapidly-growing startup environments

What we offer

  • Shares in the company (we’re a Unicorn company)
  • Unlimited 3D prints
  • Fun team events
Formlabs GmbH - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Electromechanical Test Engineer

8 matching positions

EMI Test Engineer

Location
Location
United States , Sterling Heights
Salary
Salary:
Not provided
dcscorp.com Logo
DCS Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Due to the sensitivity of customer related requirements, U.S. Citizenship is required.
  • Bachelor’s Degree in Engineering (ideally electrical or RF engineering) plus at least 5 years of experience.
  • Ability to obtain and maintain a DoD Secret clearance.
  • Familiar with MIL-STD 461 and MIL-STD 464 or other EMC commercial/industrial standards.
  • Understand how to operate RF-based instruments such as a spectrum analyzer, EMI receiver, oscilloscope, signal generator, network analyzer, etc.
  • Understand and adhere to electrical safety requirements in an electrical/electronic laboratory.
  • Understand the basics of EMC (source, coupling path, receiver) and the different types of EMC problems i.e., conducted/radiated susceptibility, conducted/radiated emissions, electrostatic discharge, etc.
  • Understand basic units used in EMC e.g., dB, dBµV/m, dBµA, dBΩ, etc. and be able to work in these units.
  • Experience with antenna cosite analysis and radio frequency (RF) desensitization.
  • Expertise in electromagnetic Interference (EMI), electromagnetic compatibility (EMC), Electrical Environmental Effects (E3) and spectrum supportability.
Job Responsibility
Job Responsibility
  • Write EMI test procedures and perform onsite testing.
  • Provide instruction to customer engineers to teach them how to conduct EMI testing.
  • Review technical documents (ICDs, Mechanical drawings, requirements, performance specifications, test plans and test reports) and provide feedback to our customers related to EMI/EMC matters.
  • Identify EMI/EMC risks and issues and provide recommended resolutions to our customers for those risks and issues.
  • Develop and/or provide input to plans of execution to include scope, budget, resource needs, material needs and schedule.
  • Perform requirements analysis and provide input to the design, implementation, test and installation of electrical and electromechanical subsystems onto combat vehicle system.
  • Perform project management duties and create related documents to support these efforts.
  • Develop and review engineering and contractual Scopes of Work (SOWs) for prime contractor.
  • Interface daily with customers and other DoD organizations to solve problems.
  • Fulltime
Read More
Arrow Right

Emi Test Engineer

Provide Electromagnetic Interference (EMI) testing services to our Department of...
Location
Location
United States , Sterling Heights
Salary
Salary:
Not provided
dcscorp.com Logo
DCS Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • U.S. Citizenship is required
  • Bachelor’s Degree in Engineering (ideally electrical or RF engineering) plus at least 12 years of experience
  • Ability to obtain and maintain a DoD Secret clearance
  • Familiar with MIL-STD 461 and MIL-STD 464 or other EMC commercial/industrial standards
  • Understand how to operate RF-based instruments such as a spectrum analyzer, EMI receiver, oscilloscope, signal generator, network analyzer, etc
  • Understand and adhere to electrical safety requirements in an electrical/electronic laboratory
  • Understand the basics of EMC (source, coupling path, receiver) and the different types of EMC problems i.e., conducted/radiated susceptibility, conducted/radiated emissions, electrostatic discharge, etc
  • Understand basic units used in EMC e.g., dB, dBµV/m, dBµA, dBΩ, etc. and be able to work in these units
  • Experience with antenna cosite analysis and radio frequency (RF) desensitization
  • Expertise in electromagnetic Interference (EMI), electromagnetic compatibility (EMC), Electrical Environmental Effects (E3) and spectrum supportability
Job Responsibility
Job Responsibility
  • Write EMI test procedures and perform onsite testing
  • Provide instruction to customer engineers to teach them how to conduct EMI testing
  • Review technical documents (ICDs, Mechanical drawings, requirements, performance specifications, test plans and test reports) and provide feedback to our customers related to EMI/EMC matters
  • Identify EMI/EMC risks and issues and provide recommended resolutions to our customers for those risks and issues
  • Develop and/or provide input to plans of execution to include scope, budget, resource needs, material needs and schedule
  • Perform requirements analysis and provide input to the design, implementation, test and installation of electrical and electromechanical subsystems onto combat vehicle system
  • Perform project management duties and create related documents to support these efforts
  • Develop and review engineering and contractual Scopes of Work (SOWs) for prime contractor
  • Interface daily with customers and other DoD organizations to solve problems
  • Fulltime
Read More
Arrow Right

Emi Test Engineer

Provide Electromagnetic Interference (EMI) testing services to our Department of...
Location
Location
United States , Sterling Heights
Salary
Salary:
Not provided
dcscorp.com Logo
DCS Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Due to the sensitivity of customer related requirements, U.S. Citizenship is required
  • Bachelor's Degree in Engineering (ideally electrical or RF engineering) plus at least 5 years of experience
  • Ability to obtain and maintain a DoD Secret clearance
  • Familiar with MIL-STD 461 and MIL-STD 464 or other EMC commercial/industrial standards
  • Understand how to operate RF-based instruments such as a spectrum analyzer, EMI receiver, oscilloscope, signal generator, network analyzer, etc
  • Understand and adhere to electrical safety requirements in an electrical/electronic laboratory
  • Understand the basics of EMC (source, coupling path, receiver) and the different types of EMC problems i.e., conducted/radiated susceptibility, conducted/radiated emissions, electrostatic discharge, etc
  • Understand basic units used in EMC e.g., dB, dBµV/m, dBµA, dBΩ, etc. and be able to work in these units
  • Experience with antenna cosite analysis and radio frequency (RF) desensitization
  • Expertise in electromagnetic Interference (EMI), electromagnetic compatibility (EMC), Electrical Environmental Effects (E3) and spectrum supportability
Job Responsibility
Job Responsibility
  • Provide Electromagnetic Interference (EMI) testing services to our Department of War (DoW) Research & Development customer at our customer's site
  • Work may expand to include Electromagnetic Compatibility (EMC), comprehensive Electromagnetic Environmental Effects (E3) services to a wide variety of DoW customers
  • Write EMI test procedures and perform onsite testing
  • Provide instruction to customer engineers to teach them how to conduct EMI testing
  • Review technical documents (ICDs, Mechanical drawings, requirements, performance specifications, test plans and test reports) and provide feedback to our customers related to EMI/EMC matters
  • Identify EMI/EMC risks and issues and provide recommended resolutions to our customers for those risks and issues
  • Develop and/or provide input to plans of execution to include scope, budget, resource needs, material needs and schedule
  • Perform requirements analysis and provide input to the design, implementation, test and installation of electrical and electromechanical subsystems onto combat vehicle system
  • Perform project management duties and create related documents to support these efforts
  • Develop and review engineering and contractual Scopes of Work (SOWs) for prime contractor
  • Fulltime
Read More
Arrow Right

EMI Test Engineer

Provide Electromagnetic Interference (EMI) testing services to our Department of...
Location
Location
United States , Sterling Heights
Salary
Salary:
Not provided
dcscorp.com Logo
DCS Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Due to the sensitivity of customer related requirements, U.S. Citizenship is required
  • Bachelor's Degree in Engineering (ideally electrical or RF engineering) plus at least 12 years of experience
  • Ability to obtain and maintain a DoD Secret clearance
  • Familiar with MIL-STD 461 and MIL-STD 464 or other EMC commercial/industrial standards
  • Understand how to operate RF-based instruments such as a spectrum analyzer, EMI receiver, oscilloscope, signal generator, network analyzer, etc
  • Understand and adhere to electrical safety requirements in an electrical/electronic laboratory
  • Understand the basics of EMC (source, coupling path, receiver) and the different types of EMC problems i.e., conducted/radiated susceptibility, conducted/radiated emissions, electrostatic discharge, etc
  • Understand basic units used in EMC e.g., dB, dBµV/m, dBµA, dBΩ, etc. and be able to work in these units
  • Experience with antenna cosite analysis and radio frequency (RF) desensitization
  • Expertise in electromagnetic Interference (EMI), electromagnetic compatibility (EMC), Electrical Environmental Effects (E3) and spectrum supportability
Job Responsibility
Job Responsibility
  • Write EMI test procedures and perform onsite testing
  • Provide instruction to customer engineers to teach them how to conduct EMI testing
  • Review technical documents (ICDs, Mechanical drawings, requirements, performance specifications, test plans and test reports) and provide feedback to our customers related to EMI/EMC matters
  • Identify EMI/EMC risks and issues and provide recommended resolutions to our customers for those risks and issues
  • Develop and/or provide input to plans of execution to include scope, budget, resource needs, material needs and schedule
  • Perform requirements analysis and provide input to the design, implementation, test and installation of electrical and electromechanical subsystems onto combat vehicle system
  • Perform project management duties and create related documents to support these efforts
  • Develop and review engineering and contractual Scopes of Work (SOWs) for prime contractor
  • Interface daily with customers and other DoD organizations to solve problems
  • Fulltime
Read More
Arrow Right

Electromechanical Engineer

E80 Group is a multinational company specialized in the development of automated...
Location
Location
Mexico , San Pedro Garza García
Salary
Salary:
Not provided
e80group.com Logo
E80 Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in Engineering field
  • Reading and understanding electrical, electro-pneumatic and oleo-hydraulic diagrams
  • Reading and understanding of mechanical technical drawings
  • Knowledge of current regulations in the field of machine safety
  • Use of mechanical and electrical measuring tools
  • Good communication (English and spanish)
  • Availability for international travel for 70% of the time
Job Responsibility
Job Responsibility
  • Perform the testing, anomalies resolution and troubleshooting on electromechanical, electro-pneumatic and oleo-hydraulic circuits of LGV, robotized islands, and warehouses during the installation of plant at customer
  • Perform the ordinary and extraordinary maintenance procedures of machines
  • Fulltime
Read More
Arrow Right

Emi Test Engineer

Location
Location
United States , Sterling Heights
Salary
Salary:
Not provided
dcscorp.com Logo
DCS Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • U.S. Citizenship is required
  • Bachelor’s Degree in Engineering (ideally electrical or RF engineering) plus at least 12 years of experience
  • Ability to obtain and maintain a DoD Secret clearance
  • Familiar with MIL-STD 461 and MIL-STD 464 or other EMC commercial/industrial standards
  • Understand how to operate RF-based instruments such as a spectrum analyzer, EMI receiver, oscilloscope, signal generator, network analyzer, etc.
  • Understand and adhere to electrical safety requirements in an electrical/electronic laboratory
  • Understand the basics of EMC (source, coupling path, receiver) and the different types of EMC problems i.e., conducted/radiated susceptibility, conducted/radiated emissions, electrostatic discharge, etc.
  • Understand basic units used in EMC e.g., dB, dBµV/m, dBµA, dBΩ, etc. and be able to work in these units
  • Experience with antenna cosite analysis and radio frequency (RF) desensitization
  • Expertise in electromagnetic Interference (EMI), electromagnetic compatibility (EMC), Electrical Environmental Effects (E3) and spectrum supportability
Job Responsibility
Job Responsibility
  • Provide Electromagnetic Interference (EMI) testing services to our Department of War (DoW) Research & Development customer at our customer's site
  • Write EMI test procedures and perform onsite testing
  • Provide instruction to customer engineers to teach them how to conduct EMI testing
  • Review technical documents (ICDs, Mechanical drawings, requirements, performance specifications, test plans and test reports) and provide feedback to our customers related to EMI/EMC matters
  • Identify EMI/EMC risks and issues and provide recommended resolutions to our customers for those risks and issues
  • Develop and/or provide input to plans of execution to include scope, budget, resource needs, material needs and schedule
  • Perform requirements analysis and provide input to the design, implementation, test and installation of electrical and electromechanical subsystems onto combat vehicle system
  • Perform project management duties and create related documents to support these efforts
  • Develop and review engineering and contractual Scopes of Work (SOWs) for prime contractor
  • Interface daily with customers and other DoD organizations to solve problems
  • Fulltime
Read More
Arrow Right

Emi Test Engineer

Provide Electromagnetic Interference (EMI) testing services to our Department of...
Location
Location
United States , Sterling Heights
Salary
Salary:
Not provided
dcscorp.com Logo
DCS Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • U.S. Citizenship is required
  • Bachelor’s Degree in Engineering (ideally electrical or RF engineering) plus at least 12 years of experience
  • Ability to obtain and maintain a DoD Secret clearance
  • Familiar with MIL-STD 461 and MIL-STD 464 or other EMC commercial/industrial standards
  • Understand how to operate RF-based instruments such as a spectrum analyzer, EMI receiver, oscilloscope, signal generator, network analyzer, etc.
  • Understand and adhere to electrical safety requirements in an electrical/electronic laboratory
  • Understand the basics of EMC (source, coupling path, receiver) and the different types of EMC problems i.e., conducted/radiated susceptibility, conducted/radiated emissions, electrostatic discharge, etc.
  • Understand basic units used in EMC e.g., dB, dBµV/m, dBµA, dBΩ, etc. and be able to work in these units
  • Experience with antenna cosite analysis and radio frequency (RF) desensitization
  • Expertise in electromagnetic Interference (EMI), electromagnetic compatibility (EMC), Electrical Environmental Effects (E3) and spectrum supportability
Job Responsibility
Job Responsibility
  • Write EMI test procedures and perform onsite testing
  • Provide instruction to customer engineers to teach them how to conduct EMI testing
  • Review technical documents (ICDs, Mechanical drawings, requirements, performance specifications, test plans and test reports) and provide feedback to our customers related to EMI/EMC matters
  • Identify EMI/EMC risks and issues and provide recommended resolutions to our customers for those risks and issues
  • Develop and/or provide input to plans of execution to include scope, budget, resource needs, material needs and schedule
  • Perform requirements analysis and provide input to the design, implementation, test and installation of electrical and electromechanical subsystems onto combat vehicle system
  • Perform project management duties and create related documents to support these efforts
  • Develop and review engineering and contractual Scopes of Work (SOWs) for prime contractor
  • Interface daily with customers and other DoD organizations to solve problems
  • Fulltime
Read More
Arrow Right

Electromechanical Test Technician

Within the Supply Base Management (SBM) / Supply Line Engineering (SLE) organiza...
Location
Location
Costa Rica , Alajuela
Salary
Salary:
Not provided
teradyne.com Logo
Teradyne
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associate degree in Electronics, Electromechanical Engineering, or related field OR Electronics, Electro-Mechanical Engineering advanced student
  • English Proficient
  • 5 years of experience in the following: Hands-on experience working with electronic and electromechanical components
  • Ability to read, understand, and interpret: Electrical and mechanical drawings, Component datasheets and specifications and Engineering change documentation
  • Component lifecycles, availability, and obsolescence concepts
  • ERP and PLM systems
  • Microsoft Office package
  • Working with structured data, templates, and standardized processes
Job Responsibility
Job Responsibility
  • Gather, review, validate and maintain technical specifications, datasheets, application notes, and compliance documentation for standard electronic and electromechanical components
  • Assist Supply Line Engineers in supporting global design teams during component selection for new designs, component standardization and reuse initiatives
  • Support RoHS and Environmental Compliance activities by collecting, reviewing, and maintaining compliance documentation
  • Assist in obsolescence management activities and risk assessments by helping identify risk components
  • Cross Functional Coordination acting as a primary execution interface between Supply line engineering and internal teams for component‑related follow‑ups
What we offer
What we offer
  • Teradyne offers a variety of robust health and well-being benefit programs, including medical, dental, vision, life insurance, paid vacation & holidays, tuition assistance programs, and more
Read More
Arrow Right