Electro Technical Officer Job at North Star Shipping

Salvage Electrician

The Salvage Electrician plays a critical role within SALMO operations, ensuring ...

Location

United Kingdom , Plymouth

Salary:

43200.00 GBP / Year

Defence Equipment & Support

Expiration Date

Until further notice

Requirements

Experience of providing technical advice and delivery of successful subsea activities or marine operations
Technical experience of marine operations in a variety of contexts
Hold (as minimum) either: An Engineering, Science, Technical, Technology or Marine based qualification at RQF Level 6
or A Science, Technology, Engineering and/or Marine based qualification at RQF Level 4, plus with a Professional body/institution related to your discipline hold current professional registration at the level listed below
or A Science, Technology, Engineering and/or Marine based qualification at RQF Level 3, plus a minimum of 3 further years of relevant professional experience
or With a Professional body/institution listed below, hold current professional registration at the level listed below, plus a minimum of 3 further years of relevant professional experience
or STCW 1 OOW Unlimited (STCW) or STCW OOW Engineer, or Electro-Technical Officer (ETO) III/6 (Unlimited)
In date Surface Supplied Diving qualifications that comply with Schedule 1 or Schedule 2, of the HSE Diving at Work Regulations 1997 List of Approved Diving Qualifications1 plus 3 years diving experience (supported by a logbook)
Professional Registration List (minimum levels provided): Engineering Technician (EngTech) or Registered Science Technician (RSciTech)
or Marine Engineering Technician (MarEngTech)

Job Responsibility

Support the generation and maintenance of technical documentation
Preparation of equipment, operational planning and documentation, safe systems of work, HSE regulation and system maintenance plus associated review
Differentiate and comply with relevant legislation, regulation, policy, processes, and standards
Lead operational tasks and activities associated with maintaining capability as required, identifying, managing, and escalating all associated risk as appropriate
Collaborate with on-site clients, representing DE&S
Act as the engineering safety focal point and be responsible for the day-to-day management of all aspects of engineering maintenance and supervision both ashore and afloat
Provide support in other diverse activity to both SALMO and wider Defence outputs

What we offer

26.5 days’ annual leave per year, rising to 31.5 days per year after 5 years of service
Flexible and hybrid working options
Market-leading employer pension contribution of around 28.97%
Annual performance-based bonus and recognition awards
Access to specialist training and funded professional qualifications
Support for progression
Huge range of discounts
Volunteering days
Enhanced parental leave schemes

Salvage Electrician

The Salvage Electrician plays a critical role within SALMO operations, ensuring ...

Location

United Kingdom , Plymouth

Salary:

43200.00 GBP / Year

Defence Equipment & Support

Expiration Date

Until further notice

Requirements

Experience of providing technical advice and delivery of successful subsea activities or marine operations
Technical experience of marine operations in a variety of contexts
Hold (as minimum) either: An Engineering, Science, Technical, Technology or Marine based qualification at RQF Level 6
or A Science, Technology, Engineering and/or Marine based qualification at RQF Level 4, plus with a Professional body/institution related to your discipline hold current professional registration at the level listed below
or A Science, Technology, Engineering and/or Marine based qualification at RQF Level 3, plus a minimum of 3 further years of relevant professional experience
or With a Professional body/institution listed below, hold current professional registration at the level listed below, plus a minimum of 3 further years of relevant professional experience
or STCW 1 OOW Unlimited (STCW) or STCW OOW Engineer, or Electro-Technical Officer (ETO) III/6 (Unlimited)
In date Surface Supplied Diving qualifications that comply with Schedule 1 or Schedule 2, of the HSE Diving at Work Regulations 1997 List of Approved Diving Qualifications1 plus 3 years diving experience (supported by a logbook)
Professional Registration List (minimum levels provided): Engineering Technician (EngTech) or Registered Science Technician (RSciTech)
or Marine Engineering Technician (MarEngTech)

Job Responsibility

Install, maintain, fault-find, and repair electrical systems in demanding environments
Support the generation and maintenance of technical documentation
Preparation of equipment, operational planning and documentation, safe systems of work, HSE regulation and system maintenance plus associated review
Differentiate and comply with relevant legislation, regulation, policy, processes, and standards
Act as the safety focal point and be responsible for the day-to-day management of all aspects of maintenance and supervision both ashore and afloat
Lead operational tasks and activities associated with maintaining capability as required, identifying, managing, and escalating all associated risk as appropriate
Collaborate with on-site clients, representing DE&S
Act as the engineering safety focal point
Provide support in other diverse activity to both SALMO and wider Defence outputs

What we offer

26.5 days’ annual leave per year, rising to 31.5 days per year after 5 years of service
Flexible and hybrid working options
Market-leading employer pension contribution of around 28.97%
Annual performance-based bonus and recognition awards
Access to specialist training and funded professional qualifications
Support for progression
Huge range of discounts
Volunteering days
Enhanced parental leave schemes

Electrical and Avionics Systems Engineer

ITPS is seeking a full-time Electrical Engineer to join our engineering team in ...

Location

Canada , London, Ontario

Salary:

Not provided

ITPS (CANADA) LTD

Expiration Date

Until further notice

Requirements

Solid understanding of aircraft electrical systems, power distribution, and signal integrity
Hands-on experience with avionics interfaces and protocols: ARINC 429, RS-232/422/485, CAN bus
Experience with LRU integration, signal routing, grounding/shielding practices, and EMI/EMC considerations
Ability to work with aircraft sensors (AHRS, IMUs, magnetometers, electro-optical payloads) and mission/display computers
Familiarity with technical drawing tools (e.g., MS Visio, Enovia) and engineering design platforms
Understanding of regulatory and airworthiness documentation standards in aerospace systems
Proficiency with tools such as: MS Office, Navision, Enovia, ARINC scheduling software
Experience with Matlab or IADS for system analysis and data visualization

Job Responsibility

Lead design and development of aircraft electrical systems from concept to production
Prepare and maintain engineering documentation: I/O definitions, schematics, interface control documents (ICDs), wiring diagrams
Design and review custom PCB layouts and avionics harnessing
Oversee component selection, BOM management, and procurement coordination
Plan and conduct bench-level and on-aircraft testing, including functional verification, continuity checks, and system validation
Collaborate with avionics, flight test, and systems teams for seamless integration into flight platforms
Provide technical support during installation, troubleshooting, and acceptance testing phases

Fulltime

New

Assistant Technical Manager

JLL empowers you to shape a brighter way. Our people at JLL are shaping the futu...

Location

India , Mumbai

Salary:

Not provided

JLL

Expiration Date

Until further notice

Requirements

BE / B.Tech / Diploma in Electrical/electronic & communication/Mechanical Engineering
Minimum experience of 4 to 5 years in critical/corporate environment
People skills and ability to interact with the client staff and demands
PC literacy and proven ability to manage daily activities using various systems
Communication skills, both oral and written
Working knowledge of office Electro-mechanical & Fire Safety infra like electrical system, UPS system, Air-conditioning, FAS & BMS operation
Risk Management and process requirements
Flexible for work 24 x 7 Environment

Job Responsibility

To oversee complete engineering and maintenance requirements of the facility
Ensure 100% uptime of all critical equipment
Coordinate with vendors for AMC services
Taking handover from previous shift engineer
Monitoring and Maintain all M&E Related equipment including Electrical Systems, UPS, Lifts, HVAC, Precision A/C, Fire Fighting, Plumbing, Carpentry etc
Establish Engineering & Operational procedures and roll out the same for site staff
Establish contacts with Local authorities on the facility related issues and maintain the relationship
Responsible for all legal & statutory related compliances
Carry out Technical Audits for all installations at periodical intervals
Manage M&E scope of the projects to ensure the quality and deliverables with in the stipulated time

Fulltime

Electrical Engineer, Journeyman

DCS has an exciting opportunity for an Electrical Engineer to support the Air Fo...

Location

United States , Ogden

Salary:

Not provided

DCS Corporation

Expiration Date

Until further notice

Requirements

U.S. Citizenship is required
Must hold an active Secret clearance
Bachelor’s Degree in a professional engineering discipline and at least 5 years of experience in the respective technical / professional discipline being performed, 3 of which must be in the DoD, OR 7+ years of directly related experience, 5 of which must be in the DoD
Experience and/or training in the following electrical engineering areas: Design, development, and circuit analysis
RF chain sub-specialties (antenna design, high power transmitters/amplifiers, receiver processing, etc.)
Electro-mechanical controls
Modeling and simulation
Test and evaluation
Technical data package development and sustainment
Principles of configuration management

Job Responsibility

Provide system engineering review and analysis of assigned systems throughout all acquisition phases
Assist in translating DoD user requirements into system requirements for design, development, fabrication, testing, and evaluation of systems, subsystems, and equipment
Develop and refine features to improve, extend, or validate current methods, data, or techniques
Review overall system design baseline (architecture and interoperability) requirements
Assist in the development of system specifications and architecture products
Perform independent analysis of engineering changes, specifications, and vendor proposals, providing recommendations to Government points of contact
Support life cycle cost evaluations of proposed systems and components
Provide test and evaluation support, including planning, execution, and analysis, and participate in Integrated Test Teams, Test Readiness Reviews, and related program events
Schedule and secure test resources to meet program office objectives
Monitor and report on test and evaluation (T&E) activities across all systems

Fulltime

New

Intern, Hardware Engineering

The Internship program has been designed to allow students to learn through hand...

Location

United States , San Diego

Salary:

22.00 - 30.00 USD / Hour

werfen

Expiration Date

Until further notice

Requirements

Currently enrolled in a bachelor’s or Graduate degree program with a minimum GPA of 3.2 in the STEM field, (Electrical, Mechanical, Bioengineering)
Proficiency with CAD software modeling, simulation, and data visualization (e.g., MATLAB, SolidWorks, Altium, and Python are preferred)
Ability to analyze engineering data and statistics
Strong proficiency using Microsoft Office (Excel, Word, PowerPoint)
Electro-mechanical systems design and control
Ability to handle multiple priorities, projects, and assignments simultaneously
Strong analytical and problem-solving abilities
Ensure and maintain compliance with the Company’s quality system requirements through training and adherence to policies, procedures, and processes

Job Responsibility

Assisting in the design, development, and testing of novel medical devices or systems
Performing engineering calculations, simulations, and testing
Conducting laboratory experiments, collecting data, and performing detailed analysis and preparation of technical reports and documentation
Complete assignments on time
make sound technical judgments and suggestions

Fulltime

New

Biomedical Specialist

The BioMedical Specialist is a Subject Matter Expert (SME) and provides clinical...

Location

United States , Douglasville

Salary:

Not provided

Wellstar Health System

Expiration Date

Until further notice

Requirements

Associates Biomedical Engineering or other
CompTIA A+ Certification Upon Hire Preferred or Cert Biomed Engineering Tech Upon Hire Preferred
Minimum 5 years of experience in supporting medical devices and systems in a hospital environment
Minimum 5 years Knowledge of electronic digital circuitry and understanding of electronic and electro-mechanical device
Proficient in Microsoft Office software including Word, Excel, and PowerPoint
Capable of interpreting building architectural and systems drawings and information
Able to compose and deliver presentations regarding medical devices and systems to clinical staff
Working knowledge of Security Protocols

Job Responsibility

Perform calibrations and repairs on equipment as assigned
Demonstrate knowledge of safe and approved troubleshooting techniques on medical devices
Read schematics and service manuals, consult with vendors and service representatives to assist in troubleshooting
Utilizes test equipment and complete complex repairs in a time and cost-effective manner with patient safety as the primary focus
Document work performed and any significant performance data accurately and in a timely manner
Provide leadership during project planning and equipment implementations
Serve as an advisor to administrative, medical, and clinical staff in the safe use and proper operation of clinical equipment and aids in the selection process for new equipment
Operates as part of a team of engineers responsible for providing in depth technical knowledge required to implement, manage, upgrade and support many applications and interoperability into EPIC and other repositories
Responds to service calls to evaluate, diagnose, and perform corrective and preventive maintenance on complex biomedical equipment
Coordinates work performed by service contractors and vendors

Fulltime

New

Biomed Tech II

The Biomedical Equipment Technician II (BMET2) provides clinical equipment servi...

Location

United States , Augusta

Salary:

Not provided

Wellstar Health System

Expiration Date

Until further notice

Requirements

High School Diploma General
Associates Electrical Engineering-Preferred or Associates Biomedical Engineering-Preferred or Associates Mechanical Engineering-Preferred
GADL - Georgia Driver's License or VSDL - Valid State Driver's License
CCNA Certification Upon Hire Preferred or PMP Certification Upon Hire Preferred or Equivalent Certification Upon Hire Preferred
Minimum 3 years of experience in supporting medical devices and systems in a hospital environment
Minimum 3 years Knowledge of electronic digital circuitry and understanding of electronic and electro-mechanical devices
Proficient in Microsoft Office software including Word, Excel, and PowerPoint
Capable of interpreting building architectural and systems drawings and information
Able to compose and deliver presentations regarding medical devices and systems to clinical staff
Working knowledge of Security Protocols

Job Responsibility

Responds to service calls to evaluate, diagnose, and perform corrective and preventative maintenance on biomedical equipment which requires moderate intervention
Performs safety acceptance testing on new medical equipment and on hospital equipment returned after service
Documents all repair, maintenance, installation, and other activity in a timely fashion using the departments equipment management software and other mechanisms as needed
Update/Install medical equipment to include security protocols and work with customers to provide design solutions maintaining technical and application standards
Works closely with all engineers across all teams including, Biomedical Engineering, Desktop Support, Systems and Network Engineering
Coordinates with WellStar IT in support of planning, installation and servicing networked medical devices and systems
Serves as a customer relations representative for the department, correcting service deficiencies within the positions scope of responsibility and relaying other issues to the Program Manager
Has working knowledge of and appropriate interaction with other support departments necessary for performing the BioMedical Department function
Maintains knowledge of current regulations and compliance standards for medical equipment and technology developments
Contributes to System/ Facility/ Department Quality & Performance Improvement efforts

Fulltime

Electro Technical Officer

North Star Shipping

Location:
United Kingdom

Category:
Logistics

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 03, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Electro Technical Officer

Salvage Electrician

Salvage Electrician

Electrical and Avionics Systems Engineer

Assistant Technical Manager

Electrical Engineer, Journeyman

Intern, Hardware Engineering

Biomedical Specialist

Biomed Tech II

Electro Technical Officer

North Star Shipping

Location:United Kingdom

Category:Logistics

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 03, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Electro Technical Officer

Salvage Electrician

Salvage Electrician

Electrical and Avionics Systems Engineer

Assistant Technical Manager

Electrical Engineer, Journeyman

Intern, Hardware Engineering

Biomedical Specialist

Biomed Tech II

Location:
United Kingdom

Category:
Logistics

Contract Type:
Not provided

Job Posted:
January 03, 2026