Electrical Tester & Inspector Job at Sureserve (Kingston Upon Thames)

Electrical Tester & Inspector

The purpose of the role is to carry out electrical installation testing in our c...

Location

United Kingdom , East London

Salary:

40000.00 - 52000.00 GBP / Year

Sureserve

Expiration Date

Until further notice

Requirements

City & Guilds NVQ level 3
City & Guilds 2391 or 2394/5
City & Guilds 2382 18th Edition
Full UK Driving Licence

Job Responsibility

Carry out periodic inspections of clients’ electrical installations in accordance with the current edition of BS7671
Produce Electrical Installation Condition Reports (EICR) which meets the requirements and quality standards of clients and external accrediting bodies (e.g., NICEIC)
Perform other electrical tests and inspections, and produce the appropriate documentation in accordance with the current edition of BS7671
Always adhere to Company Health & Safety Policies and Procedures
Keep abreast of changes and amendments of standards, regulations, and best practices within the electrical industry
Complete follow-on remedial works, where required
Installation/replacement of domestic fire protection systems to LD2/LD3

What we offer

Contributory Pension scheme
Life assurance
28 days annual leave inclusive of bank holidays, rising 1 per year of service to a max of 33 days
Enhanced maternity, paternity, adoption leave, and other family friendly policies such as carer’s leave, neonatal leave, IVF, and assisted conception leave
Sureserve Benefits Hub, accessing over 1000’s retail discounts
Virtual GP service, 24/7, 365 days, available for employees and your immediate family
Employee assistance programme (EAP), available 24/7. 365 days, for employees and your immediate family
Bike2Work scheme
Home & Electronics – salary sacrifice purchase scheme

Fulltime

Electrical Tester & Inspector

The purpose of the role is to carry out electrical installation testing in our c...

Location

United Kingdom , Kensington area (W8)

Salary:

40000.00 - 52000.00 GBP / Year

Sureserve

Expiration Date

Until further notice

Requirements

City & Guilds NVQ level 3
City & Guilds 2391 or 2394/5
City & Guilds 2382 18th Edition
Full UK Driving Licence

Job Responsibility

Carry out periodic inspections of clients’ electrical installations in accordance with the current edition of BS7671
Produce Electrical Installation Condition Reports (EICR) which meets the requirements and quality standards of clients and external accrediting bodies (e.g., NICEIC)
Perform other electrical tests and inspections, and produce the appropriate documentation in accordance with the current edition of BS7671
Always adhere to Company Health & Safety Policies and Procedures
Keep abreast of changes and amendments of standards, regulations, and best practices within the electrical industry
Complete follow-on remedial works, where required
Installation/replacement of domestic fire protection systems to LD2/LD3

What we offer

Contributory Pension scheme
Life assurance
28 days annual leave inclusive of bank holidays, rising 1 per year of service to a max of 33 days
Enhanced maternity, paternity, adoption leave, and other family friendly policies such as carer’s leave, neonatal leave, IVF, and assisted conception leave
Sureserve Benefits Hub, accessing over 1000’s retail discounts
Virtual GP service, 24/7, 365 days, available for employees and your immediate family
Employee assistance programme (EAP), available 24/7. 365 days, for employees and your immediate family
Bike2Work scheme
Home & Electronics – salary sacrifice purchase scheme

Fulltime

New

Vehicle Inspector / Tester

The Vehicle Inspector / Tester is responsible for inspecting, testing, and evalu...

Location

Kenya , Manda Bay

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

1–3 years of experience in vehicle inspection, testing, automotive maintenance, or fleet operations
High school diploma or equivalent
Basic knowledge of automotive systems, safety inspections, and vehicle testing procedures
Ability to read inspection checklists, technical manuals, and basic maintenance documentation
Ability to perform physical tasks including standing, bending, and working around vehicles
Must possess a valid passport and be able to travel internationally
Passport must be valid for at least one year beyond hire date

Job Responsibility

inspecting, testing, and evaluating vehicles and related equipment in accordance with Navy motor transport standards and safety requirements
conducting pre‑operational, operational, and post‑maintenance inspections to verify vehicle condition, performance, and roadworthiness
performing functional testing of vehicle systems such as brakes, steering, lighting, electrical components, and safety devices
identifying deficiencies, documenting inspection results, and coordinating with maintenance personnel to ensure corrective actions are completed
maintaining inspection records, supporting vehicle acceptance and turn‑in processes, assisting with compliance inspections, and ensuring vehicles meet operational and safety standards
supporting fleet readiness and mission‑critical transportation operations in a remote environment

Fulltime

Site Qc Specialist - Documentation

This position supports projects throughout the United States. Current active pro...

Location

United States , Charlotte

Salary:

90000.00 - 115000.00 USD / Year

Morson Talent

Expiration Date

Until further notice

Requirements

BS degree in engineering (preferably in mechanical, electrical or material science)
A minimum of 2 years of experience in the hydropower industry or equivalent experience in an industrial construction environment
NDT/NDE related technical experience
High School Diploma or GED
7+ years of experience in the hydropower industry preferred or an equivalent education and experience in an industrial construction or manufacturing environment
CWI or possess the education and experience required to qualify for certification and a working knowledge of ASME and AWS Codes
NDT/NDE related technical experience and/or qualified to pass Level 2 certification in RT, UT, PT, and/or MT is a plus
Laser metrology experience with machined parts is a plus
Ability and experience with typical equipment, such as micrometers, Vernier calipers, height gauges, dial indicators, oscilloscopes, component testers and the like
MS office suite compatible for correspondence and reporting

Job Responsibility

Ensuring fulfilment of Quality requirements on site according to the contract, our client’s Quality processes and installation & commissioning manuals
Establishes/Maintains relationships with customer site representatives on Quality topics
Monitors performance of Quality system on site
Represents our client interests on site with full-time on-site presence
Look-ahead planning
Review upcoming work to ensure all inspections are planned with the right resources and tools to ensure effective inspections and progress
Support improvement of Installation & Commissioning manuals by providing feedback to documents owners
Prepares Notice of Inspections daily and three week look ahead
Preparation and coordination of installation quality documentation
Support installation supervisors to ensure work is performed in accordance with installation manuals

What we offer

Overtime pay (when applicable)
Per diem for eligible assignments
Travel-related expenses and reimbursements
Opportunities for additional earnings based on project demands and travel requirements

Fulltime

Quality Inspector - Cable & Wire Harness - Level 2

For almost 30 years, SQA Services has been a premier leader in providing managed...

Location

United States , Anaheim

Salary:

30.00 - 35.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

Cable and Wire Harness Inspection Experience (3+ years)
Proficient in reading and interpreting blueprints and electrical schematics
Knowledge of IPC/WHMA-A-620 Familiarity
Familiarity with general quality inspection tools and techniques
Strong organizational and communication skills
Strong documentation skills
Must be a U.S. citizen or U.S. lawful permanent resident (green card holder)

Job Responsibility

Perform in-process and final inspections on cable and harness assemblies
Record inspection data, maintain accurate documentation, and report non-conformances
Support MRB activities and provide feedback to production and quality teams on recurring issues
Verify workmanship against IPC/WHMA-A-620, customer specifications, and internal procedures
Inspect for continuity, proper crimping, soldering, labeling, and overall assembly quality
Review and interpret engineering drawings, wiring schematics, bills of materials (BOMs), and work instructions
Use tools such as calipers, microscopes, multimeters, and continuity testers during inspections
Adhere to SQA/Client policies

What we offer

Mileage reimbursement and P2P

Fulltime

New

IT Training Lead

The IT Training Lead will drive technology learning and user adoption across the...

Location

United States , Delray Beach

Salary:

Not provided

Robert Half

Expiration Date

Until further notice

Requirements

Experience in IT training, instructional design, technical enablement, or learning and development
Strong knowledge of Microsoft 365
Excellent communication, facilitation, and content development skills
Ability to translate technical concepts into practical, user-friendly training.

Job Responsibility

Design, develop, and deliver IT training programs in instructor-led, virtual, and self-paced formats
Take lead in the Microsoft Copilot and AI training strategy, including onboarding, advanced use cases, responsible AI usage, and ongoing enablement
Partner with IT leadership to support new technology rollouts, system upgrades, and digital transformation initiatives
Create and maintain training content, including videos, guides, tutorials, and job aids
Identify skill gaps and develop targeted learning solutions to improve adoption and productivity
Gather feedback and measure training effectiveness to continuously improve programs.

New

K Kitchen Representative

The position includes, but is not limited to, the following essential job duties...

Location

United States , New Albany

Salary:

Not provided

Circle K

Expiration Date

Until further notice

Requirements

Excellent communication skills
Team player who can work well with others or independently
Acts with integrity
keeps commitments
Contagious positive attitude
Focuses on achieving results while having fun
Frequently bend, twist at waist, kneel, squat, stand, and walk
Occasionally climb and descend ladders
Tolerate extreme cold and hot temperatures and work in and around fryers, ovens, grills, coolers, freezers, sharp objects, and loud noises
Reach, grasp, and manipulate objects with hands for entire shift, including reaching for objects overhead

Job Responsibility

Provides excellent guest service in a fast and friendly manner
Maintains a clean restaurant environment by cleaning and performing general housekeeping duties
Prepares and serves food items in accordance with all Brand, Company, and health department regulations
Ensures product quality, food safety, and operational standards are met
Keeps accurate cash, sales, and inventory control records
Follows all government laws and safety codes
Completes reports on all incidents following our 5-minute rule policy
Lives our Company values: One Team, Do the Right Thing, Takes Ownership, Play to Win

What we offer

Medical, Dental, Vision, Term Life and AD&D plans
Flexible spending and health savings accounts (FT)
Vacation paid time off
Company holidays paid at time and a half
Matching 401(k)
Tuition Reimbursement
Stock Purchase Plan
Employee Discount Program
Discount Meal Benefit
Wellness Plan

New

K Kitchen Representative

Location

United States , Decatur

Salary:

Not provided

Circle K

Expiration Date

Until further notice

Requirements

Excellent communication skills
Team player who can work well with others or independently
Acts with integrity
keeps commitments
Contagious positive attitude
Focuses on achieving results while having fun
Frequently bend, twist at waist, kneel, squat, stand, and walk
Occasionally climb and descend ladders
Tolerate extreme cold and hot temperatures and work in and around fryers, ovens, grills, coolers, freezers, sharp objects, and loud noises
Reach, grasp, and manipulate objects with hands for entire shift, including reaching for objects overhead

Job Responsibility

Provides excellent guest service in a fast and friendly manner
Maintains a clean restaurant environment by cleaning and performing general housekeeping duties
Prepares and serves food items in accordance with all Brand, Company, and health department regulations
Ensures product quality, food safety, and operational standards are met
Keeps accurate cash, sales, and inventory control records
Follows all government laws and safety codes
Completes reports on all incidents following our 5-minute rule policy
Lives our Company values: One Team, Do the Right Thing, Takes Ownership, Play to Win

What we offer

Medical, Dental, Vision, Term Life and AD&D plans
Flexible spending and health savings accounts (FT)
Vacation paid time off
Company holidays paid at time and a half
Matching 401(k)
Tuition Reimbursement
Stock Purchase Plan
Employee Discount Program
Discount Meal Benefit
Wellness Plan

Select Country

Electrical Tester & Inspector

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?

Electrical Tester & Inspector

Electrical Tester & Inspector

Electrical Tester & Inspector

Vehicle Inspector / Tester

Site Qc Specialist - Documentation

Quality Inspector - Cable & Wire Harness - Level 2

IT Training Lead

K Kitchen Representative

K Kitchen Representative

Our AI answers in your language