Electrical Test Engineering Lab Technician Job at Amentum (Crane)

Electrical Engineering Lab Technician

The Electrical Engineering Lab Technician supports engineering activities by per...

Location

United States , Wilsonville

Salary:

52800.00 - 74250.00 USD / Year

BorgWarner

Expiration Date

Until further notice

Requirements

Perform basic technical assignments under the direction and supervision of an engineer
predominantly testing new products, circuits for thermal, control, and electrical characteristics
Perform rework and light assembly work
Able to follow mechanical prints and models
Make calculations employing mathematical formulas and basic electrical principles
Provide technical assistance in design, layout and detail drawing, material procurement, and construction of experimental setups
Compile and organize technical data and prepare reports for evaluation by the engineers in charge
Including post processing of experiment results performed
Duties consist mainly of closely supervised assignments in direct support of the engineer, usually in a specific field requiring the application of basic technical fundamentals
Must be able to positively relate and interact with co-workers

Job Responsibility

Supports engineering activities by performing foundational technical tasks under the direction and supervision of an engineer
Focuses primarily on testing new products and circuits for thermal, control, and electrical characteristics
Performing light assembly, rework, and construction of experimental setups
Applies basic electrical principles, conducts calculations, follows mechanical prints and models, compiles and organizes technical data, and prepares post processed reports for engineering evaluation
Helping the R&D lab
Assisting customers as needed
Supporting pre production activities
Success in this role requires dependable on site attendance, effective teamwork, and the ability to positively engage with coworkers while providing direct technical support to engineering teams

Fulltime

Electrical Engineering Technician II

Sigma Design is a product development, engineering, and manufacturing firm. Base...

Location

United States , Burlingame

Salary:

31.00 - 39.00 USD / Hour

Sigma Design

Expiration Date

Until further notice

Requirements

High School Diploma or GED required
Associate degree or technical certification preferred
2–5 years of hands-on experience in electrical/electronics technician roles
Strong expertise in soldering (SMT and through-hole) and electronic assembly
Experience with cable harness manufacturing, routing, and integration
Ability to read and interpret complex schematics, wiring diagrams, and cable drawings
Proficiency with lab instrumentation (multimeters, oscilloscopes, power supplies, etc.)
Familiarity with IPC-A-610 and IPC/WHMA-A-620 standards (certification preferred or willingness to obtain)
Experience troubleshooting at board and system level, including cabling and interconnects
Strong organizational, documentation, and problem-solving skills

Job Responsibility

Build, assemble, and test electrical prototypes, subassemblies, and fixtures from engineering drawings and schematics
Perform precision soldering (SMT and through-hole) for R&D and production builds
Manufacture, terminate, and label cable harnesses to print for prototypes and test systems
Route and integrate cabling within assemblies, robots, and test rigs per engineering specifications
Troubleshoot electrical, soldering, and cable-related issues at component, board, and system levels
Execute and document test procedures, capturing accurate and detailed results
Provide feedback to engineers on schematics, wiring diagrams, and cable drawings for clarity and manufacturability
Modify, repair, or replace cables and electrical components in lab and field environments as needed
Maintain cable harness equipment (e.g., stripping machines, crimpers) and lab/test tools
Ensure compliance with IPC and WHMA standards, including IPC-A-610 and IPC/WHMA-A-620

What we offer

401(k) with up to 4% company match
quarterly bonus program
15-days of accrued PTO
9 company paid holidays
medical insurance
dental insurance
vision
long-term disability
life insurance

Fulltime

Engineering Test Technician

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

50600.00 - 69600.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Associate's Degree, or equivalent extensive practical experience as a testing technician
Direct hands on experience with mechanical and electronic assemblies
LV/HV wiring fabrication
Proficient knowledge of electrical circuitry including HV systems
Experience with product testing, including (but not limited to): Specialty Dyno testing
Battery Testing
Electrical testing
Excellent documentation and written communication
proficient using Microsoft Office
Familiarity with 5S or similar workplace organization methods

Job Responsibility

Perform motor and drive unit testing on specialty dyno setups
Setup equipment and devices for specialty testing
Troubleshoot and debug test setups
Work with Design engineering on custom test configurations
Design and build basic lab fixtures and tools
Procure, install, organize and maintain test equipment
Maintain a clean, safe and useable lab and shop space
Perform routine maintenance of testing equipment
Support engineering activities including prototype development, proof of concept studies, process and assembly validation
Communicate cross-functionally with engineering teams to achieve project goals and meet timeline deadlines

Fulltime

Body & Chassis Test Technician

We are hiring Test Technicians to work at the Body and Chassis Dyno lab in Dearb...

Location

United States , Detroit

Salary:

20.00 - 30.00 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

High School Diploma required
Must have proficient electrical and mechanical knowledge and skills
Good interpersonal, computer, oral and written skills
Must complete and pass a pre-employment drug screen, health performance evaluation, and background check
Must demonstrate professional behavior at all times when dealing with customers, management and co-workers
Must have clear, concise and accurate communications skills in English, both verbal and written
Grooming and dress must be appropriate for the position and must not impose a safety risk to self or others
Must maintain a positive work atmosphere by behaving and communicating in a professional manner
Dependable personal transportation to work site is required

Job Responsibility

Complete test-related duties as assigned during daily scheduling meetings. Execute work independently with quality and efficiency
Ability to receive parts and prepare for first run subsequent runs according to test matrices
Ability to conduct test stand sample prep, fixturing, installation / removal, photographic documentation, test execution, data collection and review
Ability to run standard tests and support test engineers for unique one-off testing in a lab environment
Ability to run multiple test facilities simultaneously
Will be required to meet all workplace Health and Safety requirements and practices. Provide feedback and identify opportunities to improve workplace conditions
Continually work to ensure customer satisfaction is maintained and proper data quality is achieved
Self-starter, highly motivated, strong team player with positive attitude

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Electrical Technician IV

In this role, you’ll assemble, wire, and test instrumentation and control (I&C) ...

Location

United States , Wilmington

Salary:

30.00 - 42.80 USD / Hour

Morson Talent

Expiration Date

Until further notice

Requirements

HS diploma, or associates degree

Job Responsibility

Assemble and build I&C system components, panels, and assemblies per engineering drawings, wiring diagrams, and work instructions
Perform bench-level testing of sensors, transmitters, controllers, and signal conditioning equipment
Support system integration by wiring, configuring, and verifying I&C connections and test setups
Assist with prototype builds, hardware troubleshooting, and calibration activities
Execute calibration and verification procedures using standard lab equipment
Document build and test results, including assembly records, data, and nonconformance reports
Maintain lab organization, tool control, and a safe working environment
Support functional and environmental testing such as continuity, insulation resistance, and signal verification
Follow all Environmental, Health, and Safety (EHS) standards and lab protocols
Collaborate with engineers and technicians to identify and resolve design or test issues

Fulltime

Electrical Technician III

We are seeking a skilled and motivated EE Technician to join a hardware team foc...

Location

United States , Redmond

Salary:

29.00 - 39.00 USD / Hour

Apex Systems

Expiration Date

Until further notice

Requirements

AS/AA or BS degree in Electrical Engineering, Electronics Technology, or equivalent practical experience
3+ years of experience with electronic assembly and soldering, including (01005) and 0.35mm-pitch BGA components
Ability to operate standard lab test and measurement equipment such as oscilloscopes, DMMs, power supplies, signal generators, and LCR meters
Proficiency in reading and interpreting electrical datasheets, schematics, PCB layout drawings, and mechanical assembly drawings

Job Responsibility

Build, assemble, rework, and modify prototype PCBs and electronic assemblies, including fine-pitch SMD (01005) and 0.35mm-pitch BGA components
Test and repair units by running functional tests, performing visual inspections, and executing component or module exchanges to isolate failures
Document all work performed on each unit in a thorough and consistent manner
Create and maintain test fixtures, wiring harnesses, and cable assemblies for prototype evaluation
Maintain lab equipment, manage component inventory, and ensure lab safety standards are upheld
Adapt to a changing statement of work, prioritizing and balancing multiple tasks
Collaborate with design engineers for troubleshooting, clarification, and feedback
Propose and implement process improvements to increase production efficiency

What we offer

Medical
dental
vision
life
disability
other insurance plans
ESPP (employee stock purchase program)
401K program with company match after 12 months
HSA (Health Savings Account on the HDHP plan)
SupportLinc Employee Assistance Program (EAP) with up to 8 free counseling sessions

Product Failure Analysis Lab Technician

Location

Portugal , Viana do Castelo

Salary:

Not provided

BorgWarner

Expiration Date

Until further notice

Requirements

Completion of a technical education program at the secondary level in a relevant field
Ideally, completion of higher education programs in fields such as electronic or electrical area
Electrical Testing Skills: Proficient in using tools such as oscilloscopes, multimeters, thermal cameras, welding, soldering and analyzing circuit functionality
Mechanical Testing Skills: Advanced abilities in tensile, torque, vibration and stress testing using specialized equipment
Chemical Composition analysis with SEM and XRF
Hardness Test according to Rockwell C and Brinell scales
Industrial Imaging Experience in both nondestructive (X-ray, CT Scans and microscope)
Availability to travel
Knowledge in MSA and SPC
Fluent in English

Job Responsibility

Conduct electrical tests like circuit continuity checks, signal integrity analysis, or power output measurements
Perform in-depth tests and analysis to diagnose the root cause of failures in products, focusing on electrical, mechanical, and chemical components
Participate in problem solving teams across BW Technical Centers and Plant to identify problem root causes
Execute mechanical assessments like stress testing, load distribution analysis, and material failure tests (pull and push tests)
Perform Tear down and non-destructive tests analysis (0Km and field Kms)
Perform destructive and non-destructive testing methods, such as X-ray inspections, microscopy, and tensile strength testing, soldering/desoldering, lead conditioning, deballing/rebelling, mechanical/chemical decapsulation, package/die level reprocessing, cross-sectioning, and other FA techniques available in the laboratory
Create comprehensive reports that detail methodologies, observations, and conclusions of failure investigations using data visualization tools to present findings effectively, incorporating charts and others
Work closely with FA engineer and customer to meet and improve the response time
Develop and implement new failure analysis methods if necessary
Comply with safety, quality, productivity, hygiene and environmental prevention standards

Fulltime

Electromagnetic Effects Lab Technician

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , North Charleston

Salary:

63650.00 - 102350.00 USD / Year

Boeing

Expiration Date

Until further notice

Requirements

Associate's degree or higher from an accredited course of study in Engineering, Computer Science, Mathematics, Physics or Chemistry
3+ years of experience in an Electrical/Electronic laboratory test environment
3+ years of experience with testing and troubleshooting of electronics and Electrical systems

Job Responsibility

Perform all laboratory testing (including high voltage lightning pulser testing) and test planning to characterize electromagnetic properties and failure modes of designs with respect to EME, Lightning Direct Effects, and Lightning Indirect Effects
Maintain Lab testing schedule and provide recommendations to management on necessary resources for testing
Conduct tests to validate system performance
Conduct complex tests and document results
participate in test readiness reviews
Design, build, and modify test fixtures for lightning direct effects testing
Maintain lab equipment calibration and maintenance
Support parts procurement and interface with supply chain to maintain lab equipment necessary for scheduled testing
Collaborate with internal and external shipping partners to transfer and receive parts, tools, and materials
Collaborate across diverse teams and support in-house fabrication of test panels

What we offer

competitive base pay and variable compensation opportunities
health insurance
flexible spending accounts
health savings accounts
retirement savings plans
life and disability insurance programs
paid and unpaid time away from work
Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits

Fulltime

Select Country

Electrical Test Engineering Lab Technician

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?