CrawlJobs Logo
Morson Talent Logo Morson Talent · IT - Software Development

Electrical Test Engineer

United Kingdom, Dorset · Job Posted May 16, 2026
Apply Position
Job Link Share

Job Description

The Electrical Test Engineer (Experienced Level) is responsible for planning, executing, and analysing electrical and electronic test activities to validate the performance, safety, and compliance of aerospace and defence systems. The role provides strong technical capability in electrical testing, instrumentation, data acquisition, and test procedure development. The post holder will support the full test lifecycle—from requirements definition and test planning through to execution, reporting, and certification—ensuring that electrical systems meet design intent, regulatory standards, and customer expectations.

Job Responsibility

  • Develop detailed electrical test plans, procedures, and acceptance criteria based on system requirements
  • Define test setups, instrumentation requirements, and data acquisition configurations
  • Support the design and commissioning of electrical test rigs, harnesses, and interface equipment
  • Ensure all test documentation complies with internal standards and applicable regulations
  • Conduct risk assessments and ensure safe execution of all electrical test activities
  • Perform electrical tests including continuity, insulation resistance, power quality, load testing, functional testing, and environmental electrical testing
  • Install and configure electrical instrumentation such as multimeters, oscilloscopes, power analysers, and signal generators
  • Operate data acquisition systems and test control equipment to capture accurate and reliable data
  • Troubleshoot electrical issues, instrumentation faults, and test anomalies during execution
  • Ensure accurate recording of test conditions, observations, and deviations
  • Analyse electrical test data to verify compliance with design requirements and standards
  • Produce detailed test reports including plots, measurements, and engineering conclusions
  • Identify electrical failures, root causes, and corrective actions where required
  • Provide clear technical feedback to design, systems, and manufacturing teams
  • Support certification and compliance activities with robust electrical test evidence
  • Work closely with electrical, systems, and manufacturing engineers to ensure test coverage aligns with design intent
  • Support prototype builds, harness manufacture, and integration activities with test-based insights
  • Assist in resolving electrical design issues through targeted test investigations
  • Participate in multidisciplinary design reviews and provide electrical test expertise
  • Ensure all electrical test activities comply with UK Health & Safety legislation including HASAWA 1974
  • Promote safe working practices in laboratories, workshops, and test facilities
  • Embed quality and traceability into all test documentation and processes
  • Support audits, compliance checks, and continuous improvement initiatives

Requirements

  • Degree in Electrical Engineering, Electronics Engineering, or related discipline
  • Experience conducting electrical testing in aerospace, defence, automotive, or similar high-integrity environments
  • Strong understanding of electrical systems, wiring practices, power distribution, and electronic components
  • Proficiency with electrical instrumentation and data acquisition systems
  • Ability to interpret electrical schematics, wiring diagrams, and technical specifications
  • Strong analytical skills with experience processing and interpreting electrical test data
  • Good communication skills and ability to work collaboratively across engineering teams
  • Working knowledge of quality management and configuration control processes

Nice to have

  • Experience with environmental electrical testing (e.g., DO-160, MIL-STD-461/810)
  • Familiarity with aerospace or defence electrical standards and certification processes
  • Experience designing or commissioning electrical test rigs and harnesses
  • Knowledge of EMC considerations, grounding, shielding, and electrical safety
  • Experience with PLM or document control systems (e.g., Windchill, Teamcenter, Vault)
Morson Talent - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Electrical Test Engineer

8 matching positions

Electrical Test Engineer

As a Housing Electrical Test Engineer for BES Electrical, you will carry out ele...
Location
Location
United Kingdom , Huddersfield
Salary
Salary:
32240.00 GBP / Year
besgroup.com Logo
BES Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • NVQ Level 3 Qualification in electrical installation work e.g. C&G 2330, 2360, 2357, 2365
  • City & Guilds Inspection and Testing or equivalent
  • 18th edition
  • To demonstrate a positive, diverse and inclusive attitude to both internal and external customers and colleagues
  • A flexible approach to working, you should be able and willing to work overtime to cover workloads during busy periods
  • To be hard-working, conscientious Electrician that takes satisfaction from delivering a great service to our prestigious client base
  • Good level of computer literacy
  • Full driving licence held for 12 months (Minimum)
  • Live within and be happy traveling across the Greater Manchester and Yorkshire areas
Job Responsibility
Job Responsibility
  • Carry out electrical testing within the social housing industry within the North West area
  • Undertake electrical testing in domestic/ communal areas and carry out any associated remedial works identified
  • Work individually or as part of a team undertaking high quality electrical repairs testing and / or remedial works as required
  • Comply with BS7671 standards and company standards of work performance, ensuring implementation and compliance within electrical policies and procedures
  • Ensure implementation and compliance with company Health and Safety policies and procedures
  • Attend Toolbox Talks in house training on a monthly basis (or as and when required)
  • Utilise both our CRM system and reporting software to accurately record electrical documentation
  • Carry out electrical condition reporting, repairs and installations to the highest of standards
  • Liaise with tenants, customers and members of our supply chain
  • Maintain van stocks and provide information enabling the improvements of first time fixes for the area you work within
What we offer
What we offer
  • Company van
  • Company Pension Scheme
  • Annual salary review
  • 20 days annual leave, increasing each year up to 25 days plus 8 bank
  • An extra day’s holiday to take on Christmas Eve each year
  • Opportunity for flexible working
  • Electric Vehicle salary sacrifice scheme
  • Discounts and savings via our employee benefits portal
  • Health and wellbeing support via our Employee Assistance Programme
  • Company wide volunteering scheme
  • Fulltime
Read More
Arrow Right

Electrical Engineer II, RF Test Engineer

As an RF Test Engineer, your work will be essential in ensuring that the wireles...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering, RF Engineering or similar discipline
  • Minimum of 3 years of hands-on RF and wireless device testing experience
  • Minimum of 3 years of wireless device test plan development for evaluating performance of various wireless interfaces against system and product requirements
  • Solid understanding of basic RF principles and theory, familiar with basic RF technology circuitry stages and topologies
  • Experience with modern RF technology including multiband Wi-Fi, Bluetooth, Cellular (LTE, 5G FR1), and multi-constellation GNSS and their test methodologies
  • Cellular experience is a must-have
  • High level of familiarity of cellular certification processes, test requirements, and test methods (PTCRB, CTIA, GCF, Carrier testing, etc), with hands on experience with device pretesting
  • Familiarity of worldwide EMC and intentional radiator regulatory standards and test methods (FCC, CE, ETSI, etc)
  • Proficient with operation of RF equipment such as RF communication testers (CMW, CMX, Litepoint), Network Analyzers, Spectrum Analyzers, RF power meters, Signal Generators, RF Test chambers
  • Experience with collaborative RF debug at device and circuit level
Job Responsibility
Job Responsibility
  • Design and implement test plans to evaluate the performance of wirelessly connected devices, ensuring they meet stringent product and regulatory requirements
  • Record RF test data and organize results, creating clear, actionable reports
  • Present findings and recommendations to cross-functional teams, enabling swift resolution of design challenges
  • Evaluate RF performance characteristics such as Total Radiated Power (TRP), Total Isotropic Sensitivity (TIS), and other over-the-air (OTA) metrics for cellular-enabled wireless devices using advanced equipment
  • Use instruments like spectrum analyzers and radio communication testers to assess conducted performance of wireless technologies, including LTE, 5G, Wi-Fi, Bluetooth, and GNSS
  • Support product field evaluations to validate RF performance under diverse real-world conditions, such as urban or rural environments
  • Investigate and debug issues such as poor sensitivity, low transmit power, or signal interference in wireless devices
  • Assist in the regulatory pre-certification and formal certification test efforts for hardware by preparing test samples, working closely with external test labs, troubleshooting issues, and ensuring successful completion of certification activities
  • Expand your knowledge of RF systems, testing methodologies, and certification standards while working closely with experienced engineers to develop your technical expertise and contribute to innovative designs
What we offer
What we offer
  • Competitive salary and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • Fulltime
Read More
Arrow Right

Electrical Test Engineer (Commercial)

As a Fixed Wire Testing Engineer for British Engineering Services Electrical, yo...
Location
Location
England , Crawley
Salary
Salary:
43420.00 - 60000.00 GBP / Year
besgroup.com Logo
BES Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • NVQ Level 3 in Electrical Installation (e.g., C&G 2330, 2360, 2357, 2365 or equivalent).
  • City & Guilds Inspection and Testing qualification (or equivalent).
  • 18th Edition Wiring Regulations.
  • To demonstrate a positive, diverse and inclusive attitude to both internal and external customers and colleagues.
  • You should be hard-working, conscientious commercial engineer that takes satisfaction from delivering a great service to our prestigious client base.
  • Good level of computer literacy
  • Full driving licence and own vehicle
Job Responsibility
Job Responsibility
  • Conduct Electrical Installation Condition Reports (EICRs) and other required electrical testing in line with BS7671 and company standards.
  • Undertake minor remedial and testing works such as emergency lighting testing, fixed appliance testing and thermal surveys.
  • Accurately maintain documentation using the company CRM and reporting software.
  • Liaise with clients and supply chain partners to provide clear communication and excellent customer service.
  • Support workload peaks through a flexible approach to working hours, including overtime where required.
What we offer
What we offer
  • Salary of £43,420 with realistic earnings of up to £60,000
  • Company van
  • Company Pension Scheme
  • Annual salary review
  • 20 days annual leave plus 8 bank holidays
  • An extra day's holiday to take on Christmas Eve each year
  • Opportunity for flexible working
  • Discounts and savings via our employee benefits portal
  • Health and wellbeing support via our Employee Assistance Programme
  • Company wide volunteering scheme
  • Fulltime
Read More
Arrow Right

Electrical Test Engineer (Commercial)

As a Fixed Wire Testing Engineer for British Engineering Services Electrical, yo...
Location
Location
United Kingdom , Croydon
Salary
Salary:
43420.00 - 60000.00 GBP / Year
besgroup.com Logo
BES Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • NVQ Level 3 in Electrical Installation (e.g., C&G 2330, 2360, 2357, 2365 or equivalent)
  • City & Guilds Inspection and Testing qualification (or equivalent)
  • 18th Edition Wiring Regulations
  • To demonstrate a positive, diverse and inclusive attitude to both internal and external customers and colleagues
  • You should be hard-working, conscientious commercial engineer that takes satisfaction from delivering a great service to our prestigious client base
  • Good level of computer literacy
  • Full driving licence and own vehicle
Job Responsibility
Job Responsibility
  • Conduct Electrical Installation Condition Reports (EICRs) and other required electrical testing in line with BS7671 and company standards
  • Undertake minor remedial and testing works such as emergency lighting testing, fixed appliance testing and thermal surveys
  • Accurately maintain documentation using the company CRM and reporting software
  • Liaise with clients and supply chain partners to provide clear communication and excellent customer service
  • Support workload peaks through a flexible approach to working hours, including overtime where required
What we offer
What we offer
  • Company van
  • Company Pension Scheme
  • Annual salary review
  • 20 days annual leave plus 8 bank holidays
  • An extra day’s holiday to take on Christmas Eve each year
  • Opportunity for flexible working
  • Discounts and savings via our employee benefits portal
  • Health and wellbeing support via our Employee Assistance Programme
  • Company wide volunteering scheme
  • Fundraising support for your chosen charity
  • Fulltime
Read More
Arrow Right

Electrical Test Engineer II

Peak Nano is on the hunt for a test engineer to lead the buildout of its capacit...
Location
Location
United States , Valley View
Salary
Salary:
Not provided
peaknano.com Logo
Peak Nano
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS in Electrical Engineering, Material Science, Physics, or related field
  • Experience with electrical test equipment
  • Familiarity with test automation tools such as Labview, Teststand, etc.
  • Basic testing hardware troubleshooting skills
  • Excellent written and verbal communication skills in English
  • US Citizenship
Job Responsibility
Job Responsibility
  • Basic thin film testing & metrology
  • Project planning and overseeing device fabrication schedules
  • Test system design for evaluation of capacitors at high voltage and/or temperature
  • Method development for capacitors to improve testing throughput including test automation where applicable
  • Post-mortem failure analysis of capacitor film and capacitor devices
  • Film and device structure imaging
  • Design of experiments to correlate fabrication process parameters to optimize prototype performance
  • Data analysis, process documentation, and reporting
  • Fulltime
Read More
Arrow Right

Staff Electrical Test Engineer - Atlas Compute and Sensing

As a Staff Electrical Test Engineer at Boston Dynamics, you will play a pivotal ...
Location
Location
United States , Waltham
Salary
Salary:
116000.00 - 160000.00 USD / Year
bostondynamics.com Logo
Boston Dynamics
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 5+ years of proficiency / experience testing and troubleshooting electronics with standard test equipment
  • Good Proficiency with Linux command line and computer networking concepts
  • Knowledge in a broad range of electronics including power and high speed communications
  • Knowledge of circuit board DfX and manufacturing test best practices
  • Competency with Python, LabView, and/or MATLAB
  • BS or MS (preferred) in Electrical Engineering or related field
Job Responsibility
Job Responsibility
  • Develop and implement comprehensive test plans for humanoid compute cores for validation, bring-up, and production environments
  • Design and maintain automated test fixtures and software for robust board-level diagnostics
  • Utilize Linux command-line tools and scripting (Python/Bash/etc.) to configure radios/networks/peripherals, execute tools, gather Linux stats, and automate testing
  • Lead troubleshooting efforts for PCBA failures, working with design engineers and suppliers to drive root-cause analysis and implement corrective actions
  • Define and optimize test procedures to improve efficiency, test coverage, and scalability in production
  • Collaborate with contract manufacturers to ensure consistent test coverage and quality control standards
  • Evaluate and integrate new test methodologies, tools, and equipment to enhance reliability and reduce cycle times
  • Document test procedures, results, and best practices to support sustained production scalability
What we offer
What we offer
  • medical
  • dental
  • vision
  • 401(k)
  • paid time off
  • annual bonus structure
  • Fulltime
Read More
Arrow Right

Staff Electrical Test Engineer - Atlas Compute and Sensing

As a Staff Electrical Test Engineer at Boston Dynamics, you will play a pivotal ...
Location
Location
United States , Waltham
Salary
Salary:
116000.00 - 160000.00 USD / Year
bostondynamics.com Logo
Boston Dynamics
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 5+ years of proficiency / experience testing and troubleshooting electronics with standard test equipment
  • Good Proficiency with Linux command line and computer networking concepts
  • Knowledge in a broad range of electronics including power and high speed communications
  • Knowledge of circuit board DfX and manufacturing test best practices
  • Competency with Python, LabView, and/or MATLAB
  • BS or MS (preferred) in Electrical Engineering or related field
Job Responsibility
Job Responsibility
  • Develop and implement comprehensive test plans for humanoid compute cores for validation, bring-up, and production environments
  • Design and maintain automated test fixtures and software for robust board-level diagnostics
  • Utilize Linux command-line tools and scripting (Python/Bash/etc.) to configure radios/networks/peripherals, execute tools, gather Linux stats, and automate testing
  • Lead troubleshooting efforts for PCBA failures, working with design engineers and suppliers to drive root-cause analysis and implement corrective actions
  • Define and optimize test procedures to improve efficiency, test coverage, and scalability in production
  • Collaborate with contract manufacturers to ensure consistent test coverage and quality control standards
  • Evaluate and integrate new test methodologies, tools, and equipment to enhance reliability and reduce cycle times
  • Document test procedures, results, and best practices to support sustained production scalability
What we offer
What we offer
  • medical
  • dental
  • vision
  • 401(k)
  • paid time off
  • annual bonus structure
  • Fulltime
Read More
Arrow Right

Electrical Engineer II - Test Fixture

This role has been designed as ''Onsite' with an expectation that you will prima...
Location
Location
Taiwan , Taipei
Salary
Salary:
Not provided
https://www.hpe.com/ Logo
Hewlett Packard Enterprise
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's or Master's degree in Electrical Engineering
  • Typically 2-4 years experience
  • Using electrical design tools and software packages
  • Ability to apply analytical and problem solving skills
  • Designing electronic components, integrated circuitry, and algorithms
  • Using empirical analysis, modeling and testing methodologies to validate component, circuit, and hardware designs and thermal/emissions management
  • Strong written and verbal communication skills
  • mastery in English and local language
  • Ability to effectively communicate design proposals and negotiate options
Job Responsibility
Job Responsibility
  • Designs portions of engineering solutions for electrical and electronic parts, subsystems, integrated circuitry, and algorithms based on established engineering principles and in accordance with development technology practices and guidelines
  • Develops and implements parameters and test plans for existing designs, including validation of tolerances, form/fit/function, shock and vibration, electromagnetic interference, safety, reliability, thermal generation, and system power measurements
  • Collaborates and communicates with internal and outsourced development partners on electrical hardware design and development
  • Participates as a member of project team of other electrical hardware engineers and internal and outsourced development partners to develop reliable, cost effective and high quality solutions for low to moderately- complex products
What we offer
What we offer
  • Health & Wellbeing
  • Personal & Professional Development
  • Unconditional Inclusion
Read More
Arrow Right