Electrical & Instrumentation Technician Job at Selectek (Conyers)

Instrumentation and Electrical Technician

Location

United States , Fairmont

Salary:

Not provided

Penn Line Energy T&D, Inc

Expiration Date

Until further notice

Requirements

Minimum 1 to 3 years’ experience in the oil and gas industry working with 12 to 24 vdc instrumentation
Must have working knowledge of electrical, SCADA, instrumentation, communication systems, and installation practices
Demonstrated knowledge of conduit, cable tray installations, Hazardous locations, Heat Trace, instrumentation, instrumentation tubing, and basic 480 volt trouble shooting
Demonstrated safety and leadership skills in a field environment with experience of taking and driving accountability for the construction and/or operations related projects in the field of Instrumentation, Controls and Electrical Power
Demonstrated track record of developing engineering solutions with a focus on process, personal and environmental safety
Demonstrated ability to scope, troubleshoot and implement fit-for-purpose I&E equipment
Ability to read and interpret various documentation and drawings for electrical, electronic, instrumentation and process related equipment, including isometric drawings, schematics and P&ID’s
Working knowledge of industry standard communication protocols such as Ethernet, Modbus, Hart and standard I/O
Knowledge of functional testing using various test equipment 754/475, pressure module, hand pump, 789 process calibrator
Knowledgeable of NEC

Instrumentation and Electrical Technician

Location

United States , Morgantown

Salary:

Not provided

Penn Line Energy T&D, Inc

Expiration Date

Until further notice

Requirements

Minimum 1 to 3 years’ experience in the oil and gas industry working with 12 to 24 vdc instrumentation
Must have working knowledge of electrical, SCADA, instrumentation, communication systems, and installation practices
Demonstrated knowledge of conduit, cable tray installations, Hazardous locations, Heat Trace, instrumentation, instrumentation tubing, and basic 480 volt trouble shooting
Demonstrated safety and leadership skills in a field environment with experience of taking and driving accountability for the construction and/or operations related projects in the field of Instrumentation, Controls and Electrical Power
Demonstrated track record of developing engineering solutions with a focus on process, personal and environmental safety
Demonstrated ability to scope, troubleshoot and implement fit-for-purpose I&E equipment
Ability to read and interpret various documentation and drawings for electrical, electronic, instrumentation and process related equipment, including isometric drawings, schematics and P&ID’s
Working knowledge of industry standard communication protocols such as Ethernet, Modbus, Hart and standard I/O
Knowledge of functional testing using various test equipment 754/475, pressure module, hand pump, 789 process calibrator
Knowledgeable of NEC

Instrumentation and Electrical Technician

Location

United States , Waynesburg

Salary:

Not provided

Penn Line Energy T&D, Inc

Expiration Date

Until further notice

Requirements

Minimum 1 to 3 years’ experience in the oil and gas industry working with 12 to 24 vdc instrumentation
Must have working knowledge of electrical, SCADA, instrumentation, communication systems, and installation practices
Demonstrated knowledge of conduit, cable tray installations, Hazardous locations, Heat Trace, instrumentation, instrumentation tubing, and basic 480 volt trouble shooting
Demonstrated safety and leadership skills in a field environment with experience of taking and driving accountability for the construction and/or operations related projects in the field of Instrumentation, Controls and Electrical Power
Demonstrated track record of developing engineering solutions with a focus on process, personal and environmental safety
Demonstrated ability to scope, troubleshoot and implement fit-for-purpose I&E equipment
Ability to read and interpret various documentation and drawings for electrical, electronic, instrumentation and process related equipment, including isometric drawings, schematics and P&ID’s
Working knowledge of industry standard communication protocols such as Ethernet, Modbus, Hart and standard I/O
Knowledge of functional testing using various test equipment 754/475, pressure module, hand pump, 789 process calibrator
Knowledgeable of NEC

Instrumentation and Electrical Technician

Location

United States , Washington

Salary:

Not provided

Penn Line Energy T&D, Inc

Expiration Date

Until further notice

Requirements

Minimum 1 to 3 years’ experience in the oil and gas industry working with 12 to 24 vdc instrumentation
Must have working knowledge of electrical, SCADA, instrumentation, communication systems, and installation practices
Demonstrated knowledge of conduit, cable tray installations, Hazardous locations, Heat Trace, instrumentation, instrumentation tubing, and basic 480 volt trouble shooting
Demonstrated safety and leadership skills in a field environment with experience of taking and driving accountability for the construction and/or operations related projects in the field of Instrumentation, Controls and Electrical Power
Demonstrated track record of developing engineering solutions with a focus on process, personal and environmental safety
Demonstrated ability to scope, troubleshoot and implement fit-for-purpose I&E equipment
Ability to read and interpret various documentation and drawings for electrical, electronic, instrumentation and process related equipment, including isometric drawings, schematics and P&ID’s
Working knowledge of industry standard communication protocols such as Ethernet, Modbus, Hart and standard I/O
Knowledge of functional testing using various test equipment 754/475, pressure module, hand pump, 789 process calibrator
Knowledgeable of NEC

Electrician/ Electrical Instrument Technician

The Electrical Instrument Technician maintains, constructs and repairs electrica...

Location

United States , Tucson

Salary:

39.38 - 40.30 USD / Hour

CalPortland

Expiration Date

Until further notice

Requirements

Physical requirements: sit, stand, stoop, bend for extended periods of time (up to 8 hrs.), climb, and lift up to 70 lbs.
Walk on all types of surfaces (uneven and/or slippery ground)
Ability to work in surroundings that include dust, vibration, heights and confined spaces
Must work in all weather conditions: heat, cold, wet, dry and/or dusty conditions and near hot kiln process
Exposure to cement, clay, limestone and various chemicals. See MSDS for more details
Able to work rotating and flexible hours
Able to work effectively both independently and as part of a team
Good verbal and written communication skills
Experience with or knowledge of all types of equipment used in the manufacturing of cement preferred
High school diploma/GED

Job Responsibility

Calibrates, designs, reconfigures, assembles, installs, inspects and maintains electrical systems and equipment, such as motors, generators, commutators, speed reducers, switchboards, circuit boards, lighting circuits, SCR, electronic control devices, computers and circuits, etc.
uses blueprints and related resources to complete tasks and checks/verifies work to ensure proper operation
Uses necessary instruments and tools such as voltmeters, ammeters, V.T.V.M’s, bridges, computers, laptops and any other industrial electrical/electronic analyzing equipment and tools needed in carrying out responsibilities
Sets up and uses rigging to handle tools and equipment, such as manlifts and cranes
climbs poles or uses mobile equipment to run, repair, modify, remove, clean, etc., power lines and all associated equipment
Designs, prepares, modifies and maintains logs, reports, charts, schematics, prints and any other paperwork incidental to duties
Maintains equipment, work areas, measuring instruments and tools
Performs minor mechanical work such as removing covers, lids or obstructions prior to electrical repair work
performs cutting and welding
paints electrical/electronic panel, switchgear, motor windings, insulating equipment, control station, etc.

What we offer

medical, dental and vision plans
life insurance
disability coverage
employee assistance program
retirement program
voluntary benefits

Fulltime

Instrumentation & Electrician Technician

As an Instrumentation & Electrician Technician you will be responsible for the r...

Location

United States , Welcome

Salary:

37.55 USD / Hour

Valero

Expiration Date

Until further notice

Requirements

High school diploma or GED required
Minimum of two years of experience in electrical or instrumentation maintenance and repair or associates degree (or higher) in a related field required
Able and willing to work on-site and in-person, required

Job Responsibility

Participate in plant maintenance program
Repair or replace plant equipment or systems on a scheduled or emergency basis
Perform preventative maintenance activities as required
Participate in safe work permit and lock out tag out programs
Interact directly with operations and shipping & receiving departments to ensure scheduled work can be completed
Assist with diagnosing and trouble-shooting maintenance related issues
Assist with new installations and other projects, as requested by the supervisor
Monitor reliability of equipment
Work with engineering department and external contractors to plan and implement installation of new equipment or systems
Know and understand city, county, state, and federal regulations relating to maintenance and plant equipment, and work in a safe manner to ensure that these regulations are met at all times

What we offer

Competitive Pay and Annual Bonus Program
100% match on 401(K) up to 7%, plus additional discretionary 3% annual company contribution
Comprehensive Healthcare and Wellness Programs
Discretionary bonus
Shift differential
Sign-on bonus

Fulltime

Electrical Control Technician

POSITION SUMMARY: To perform electrical and instrumentation inspections, repairs...

Location

United States , Salinas

Salary:

50.00 - 50.54 USD / Hour

Turner Mining Group

Expiration Date

Until further notice

Requirements

Comply with company, state and governmental health and safety regulations at all times
Complete and document Workplace Inspections in a timely manner
Be able to perform preventive maintenance checks and report findings
Participate in the work order initiation process when required
Ensure all inventory parts are correctly charged from Stores and assist with procurement of parts used as per LNA procedures
Possess a good knowledge of power distribution systems
Be able to perform low voltage and high voltage terminations
Have some experience and/or willingness & ability to learn performing maintenance on switchgear up to 2300 volts
Knowledge of low, medium and high voltage switching applications
Experience with motor ground testing and record keeping in Microsoft Excel

Job Responsibility

To perform electrical and instrumentation inspections, repairs and rebuilds on all plant operating equipment to ensure continuous operation within the required quality control standards
This role is critical to achieving Plant OEE and Equipment Availability goals by elimination of unplanned stops and extended downtimes
Incumbents in the position are required to participate in company-sponsored training and certification programs to ensure that their job knowledge and skills meet evolving company standards

Fulltime

Flight Test Instrumentation Electrical Design Lead

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

186240.00 - 232800.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

B.S. in Engineering
7+ years experience as Electrical Design Engineer or Instrumentation Engineer
Experience with design and installation of wiring for flight
Experience with the routing of wires/harnesses for aircraft
Experience generating work instructions
Experience with design for manufacturing
Must be able to lift 30 lbs unassisted

Job Responsibility

Support the Design, Fabrication, Developmental Test, and Certification Efforts of Archer’s piloted eVTOL aircraft project
Perform the Electrical Installation Design for all Flight Test Instrumentation related hardware for flight test aircraft
Support the Installation planning and liaison manufacturing for the installation of flight test instrumentation onto test aircraft in buildup and in active test
Work with internal customers and vendors to solve instrumentation and measurement related challenges
Key advisor to the Instrumentation Director regarding all aircraft instrumentation electrical design activities
Develop processes and documentation to support the installation and maintenance of flight test instrumentation
Collaborate with the Flight Test Engineering and Certification Teams to plan and perform all required development and certification flight test activities
Collaborate with all engineering design and analysis teams to establish a comprehensive instrumentation plan including, but not limited to, monitoring of strain, temperature, vibration, pressure, airdata, ECS, etc
Assist in designing all hardware required for flight test. For example, instrumentation racks, air data booms, aircrew interfaces, workstations, camera systems, telemetry systems, etc
Support instrumentation technicians and Aircraft Operations Team in the implementation of instrumentation designs

Fulltime

Electrical & Instrumentation Technician

Selectek

Location:
United States , Conyers

Category:
-

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
March 21, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Electrical & Instrumentation Technician

Instrumentation and Electrical Technician

Instrumentation and Electrical Technician

Instrumentation and Electrical Technician

Instrumentation and Electrical Technician

Electrician/ Electrical Instrument Technician

Instrumentation & Electrician Technician

Electrical Control Technician

Flight Test Instrumentation Electrical Design Lead

Electrical & Instrumentation Technician

Selectek

Location:United States , Conyers

Category:-

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:March 21, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Electrical & Instrumentation Technician

Instrumentation and Electrical Technician

Instrumentation and Electrical Technician

Instrumentation and Electrical Technician

Instrumentation and Electrical Technician

Electrician/ Electrical Instrument Technician

Instrumentation & Electrician Technician

Electrical Control Technician

Flight Test Instrumentation Electrical Design Lead

Location:
United States , Conyers

Category:
-

Contract Type:
Not provided

Job Posted:
March 21, 2026