Electrical & Instrumentation Engineer or Technologist Job at West Fraser (Quesnel)

R&D Electrical Engineer - W87-1 Flight Test Team

We are seeking an Electrical Engineer to join the dynamic W87-1 Systems team, fo...

Location

United States , Livermore

Salary:

121900.00 - 237800.00 USD / Year

Sandia National Laboratories

Expiration Date

Until further notice

Requirements

A bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development
Ability to obtain and maintain a DOE Q clearance
Graduate degree in Electrical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation)
Ability to work independently and collaborate well in a multidisciplinary team of designers and test engineers
Outstanding verbal and written skills, including the ability to develop and present briefings that are clear and compelling
Preferred degree in Electrical Engineering
Active DOE Q clearance or equivalent is preferred at the time of application
Experience contributing within a NW Systems Engineering or Telemetry (TM) team on a LEP, Mod, Futures, Stockpile System, or a related/equivalent DoW modernization program
Experience with stockpile or development ND systems, including ND reentry systems and JTA experience
Experience collaborating with SNL test facilities and organizations, demonstrating effective partnership across disciplines

Job Responsibility

Design and Innovate: Create and design cutting-edge test equipment, subcomponents, cables, and other hardware to meet rigorous performance standards for Flight Test Vehicles
Integrate Systems: Conduct requirements discovery, negotiation, and verification for mission objectives and missile compliance, collaborating across engineering domains (hardware, software, mechanical, aerospace, etc.) to ensure cohesive system integration
Lead Technical Direction: Provide guidance to technologist and partners in the assembly, calibration, troubleshooting, and operation of test equipment, system components, and instrumentation of hardware
Troubleshoot and Resolve: Identify root causes of anomalies and failures during testing and development phases
Conduct Electrical Functional Testing: Prepare and operate systems testers, analyze telemetry data, and develop unique test assets to convert data into usable engineering units
Develop Automated Solutions: Design automated test solutions for weapon systems, including test fixtures, cables, electrical sensors, and instrumentation hardware
Collaborate Effectively: Work with SNL Systems Organizations and stakeholders to keep flight test plans on schedule and address integration testing challenges
Test and Evaluate: Analyze test data to inform design decisions, support pre-flight assembly activities, and identify and mitigate risks in system design and testing processes

What we offer

Challenging work with amazing impact that contributes to security, peace, and freedom worldwide
Extraordinary co-workers
Some of the best tools, equipment, and research facilities in the world
Career advancement and enrichment opportunities
Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home)
Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance

Fulltime

Drafting Technologist III

This contract Drafter role supports Engineering and Operations by producing, upd...

Location

Canada , Edmonton

Salary:

Not provided

Randstad

Expiration Date

July 23, 2026

Requirements

Minimum 5+ years drafting experience in the oil and gas industry
Demonstrated experience working across multiple engineering disciplines (mechanical, piping, electrical, instrumentation)
Strong proficiency in AutoCAD (additional tools such as Revit considered an asset)
Experience developing and updating P&IDs, plot plans, facility layouts, and equipment drawings
Ability to interpret field redlines, site photos, and project documentation
Strong attention to detail and ability to manage multiple priorities
Ability to work independently in a contract/remote or distributed team environment
Experience working with Enbridge drawings, standards, and systems (e.g., LPDMS)
Familiarity with pipeline and facility operations
Knowledge of instrumentation, control systems, and tagging conventions

Job Responsibility

Develop, update, and maintain engineering drawings across mechanical, piping, electrical, and instrumentation disciplines
Translate engineering concepts, project deliverables, and field redlines into accurate CAD drawings
Review and incorporate site markups, photos, and as-built information into final deliverables
Ensure all drawings comply with Enbridge drafting standards (DS 001, DS 002, DS 003) and applicable industry practices
Support preparation of Issued for Construction (IFC) and As-Built drawing packages
Collaborate with engineers, project managers, field teams, and external service providers to ensure alignment
Maintain drawing control, revision history, and documentation throughout the project lifecycle
Support multi-project delivery in a fast-paced, high-volume environment

Fulltime

Maintenance Mechanic I

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

United States of America , Cleveland

Salary:

46400.00 - 58000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Associate’s degree in a technical field preferred
High School Diploma/GED with at least 2 years of mechanical systems repair, industrial maintenance, or equivalent technical experience required
Ability to individually lift and carry up to 50 pounds
Capability to bend/stoop, squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck and waist, and balance
Standard visual acuity, including the capacity to differentiate colors
Ability to work most holidays, some weekends, and plant shutdown periods
Applicants must be authorized to work for any employer in the U.S.
We cannot sponsor or transfer employment visas

Job Responsibility

Support plant production by performing repairs and preventive maintenance on manufacturing equipment
Troubleshoot equipment containing electrical, electronic, mechanical, pneumatic, hydraulic, and vacuum systems
Rebuild and modify production machines and components to support technology improvements and control parts cost
Support the installation of manufacturing equipment
Use hand tools, power tools, and electrical test instruments relating to control circuits
Directly support PMT, TPM, Lean Maintenance, and Lean Energy activities through team membership, innovative thinking, and completion of assigned projects
Act as a resource for manufacturing operator skill training and help develop area MIT abilities
Apply precision maintenance workmanship in all preventive, corrective, and project activities
Analyze machine failures for root cause and recommend corrective actions
Assist in annual equipment inspections

What we offer

Medical and dental coverage that start on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount
401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching
Flexible Spending Accounts
Educational assistance programs
Time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave
Commuting benefits
Employee Discount Program
Employee Assistance Program (EAP)

Fulltime

Maintenance Mechanic I

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

United States , Cleveland

Salary:

46400.00 - 58000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Associate's degree in a technical field preferred
High School Diploma/GED with at least 2 years of mechanical systems repair, industrial maintenance, or equivalent technical experience required
Ability to individually lift and carry up to 50 pounds
Capability to bend/stoop, squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck and waist, and balance
Standard visual acuity, including the capacity to differentiate colors
Ability to work most holidays, some weekends, and plant shutdown periods

Job Responsibility

Support plant production by performing repairs and preventive maintenance on manufacturing equipment
Troubleshoot equipment containing electrical, electronic, mechanical, pneumatic, hydraulic, and vacuum systems
Rebuild and modify production machines and components to support technology improvements and control parts cost
Support the installation of manufacturing equipment
Use hand tools, power tools, and electrical test instruments relating to control circuits
Directly support PMT, TPM, Lean Maintenance, and Lean Energy activities through team membership, innovative thinking, and completion of assigned projects
Act as a resource for manufacturing operator skill training and help develop area MIT abilities
Apply precision maintenance workmanship in all preventive, corrective, and project activities
Analyze machine failures for root cause and recommend corrective actions
Assist in annual equipment inspections

What we offer

Medical and dental coverage that start on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP)
401(k) Retirement Savings Plan (RSP)
Flexible Spending Accounts
Educational assistance programs
Paid holidays
Paid time off ranging from 20 to 35 days based on length of service
Family and medical leaves of absence
Paid parental leave

Fulltime

Sr Tech, Automation

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

Dominican Republic , Bajos de Haina

Salary:

Not provided

Baxter

Expiration Date

Until further notice

Requirements

Technologist or bachelor’s degree Engineering (Automation / Electrical / Electronic / Mechatronic / BSEE BSME) or related field
5+ years of experience in the automation industry or related
Design/Drafting Tools AutoCAD and SolidWorks
Programming Logic Controllers (PLC) (e.g. Allen-Bradley, Siemens)
Configuring and designing HMI/OIT systems (e.g. Allen Bradley, National Instruments, Maple Systems)
Familiar with Industry Standards UL, CE & Vision Systems (e.g. Cognex, Keyence)
Familiar with various Motion Controllers/Actuators (e.g. IAI, Yasakawa)
Experience and skill in troubleshooting control system issues
Able to read, write, speak and understand English at a good comprehensive level

Job Responsibility

Must develop design details, modifications of components for manufacturing machines
Prepare or review specifications of blueprints of mechanical and electrical components of machines
Develop electrical design, schematics, and drawings in AutoCAD
Interpret mechanical design drawings for electrical requirements (e.g. SolidWorks)
Must design logical sequence of any programmable controller
On new automated machine must be capable of designing pneumatic, electrical & mechanical system
Must support production lines to maintain machines and manufacturing equipment working in excellent conditions
Disassemble equipment or machinery, disconnect controls and remove defective parts so they may be repaired or substituted and perform preventive maintenance according to established standards
Develop new electrical logic sequential program and mechanical design to fulfill the goal on the new machines

Fulltime

EEG Tech

Headquartered in Phoenix, IMS is a team of 500 employees and a physician-led org...

Location

United States , Phoenix

Salary:

Not provided

Integrated Medical Services, Inc.

Expiration Date

Until further notice

Requirements

High school graduate or equivalent required
Graduate from an accredited EEG technician program strongly preferred
Active certification by American Board of Registration of Electroencephalographic and Evoked Potential Technologists strongly preferred
Two-years' work experience in Neurology preferred
Excellent verbal and written communication skills
Excellent interpersonal and customer service skills
Ability to prioritize tasks and to delegate them when appropriate
Ability to function well in a high-paced and at times stressful environments
Excellent time management skills with a proven ability to meet deadlines
Proficient with Microsoft Office Suite or related software

Job Responsibility

Performs standard and complex EEGs by measuring the patient’s head, utilizing the International 10-20 Placement System, and applies electrodes to appropriate positions
Measures electrode impedance, calibrates and adjusts EEG machine
Obtains recordings, using activating procedures such as hyperventilation, photic stimulation, and sleep
Adapts methods and instrumentation to obtain optimal results based on history, clinical observations and EEG findings
Maintains equipment, and inventory of supplies
Reorders as necessary
Detects instrument malfunction, makes minor maintenance adjustments, or reports need for major repairs to Clinical Engineering
Records routine clinical computer-averaged electrical responses to visual, auditory, somatosensory, or other stimuli with evoked response equipment
Recognizes any EP signal change due to electrical artifact, anesthetic effects, temperature, position or perfusion and determines the significant influences of any surgical events on the signal
Implements alternative methods or adjusts acquisition parameters to obtain optimal recordings

What we offer

medical insurance
dental insurance
vision insurance
short-term disability
long-term disability
life insurance
paid time off
401K plan

Fulltime

Maintenance Mechanic I

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

United States , Cleveland

Salary:

46400.00 - 58000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma/GED with at least 2 years of mechanical systems repair, industrial maintenance, or equivalent technical experience required
Associate’s degree in a technical field preferred
Ability to individually lift and carry up to 50 pounds
Capability to bend/stoop, squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck and waist, and balance
Standard visual acuity, including the capacity to differentiate colors
Applicants must be authorized to work for any employer in the U.S.

Job Responsibility

Support plant production by performing repairs and preventive maintenance on manufacturing equipment
Troubleshoot equipment containing electrical, electronic, mechanical, pneumatic, hydraulic, and vacuum systems
Rebuild and modify production machines and components to support technology improvements and control parts cost
Support the installation of manufacturing equipment
Use hand tools, power tools, and electrical test instruments relating to control circuits
Directly support PMT, TPM, Lean Maintenance, and Lean Energy activities through team membership, innovative thinking, and completion of assigned projects
Act as a resource for manufacturing operator skill training and help develop area MIT abilities
Apply precision maintenance workmanship in all preventive, corrective, and project activities
Analyze machine failures for root cause and recommend corrective actions
Assist in annual equipment inspections

What we offer

Medical and dental coverage that start on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount
401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching
Flexible Spending Accounts
Educational assistance programs
Paid holidays
Paid time off ranging from 20 to 35 days based on length of service
Family and medical leaves of absence
Paid parental leave

Fulltime

Sr Tech, Automation

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

Dominican Republic , Bajos de Haina

Salary:

Not provided

Baxter

Expiration Date

Until further notice

Requirements

Technologist or bachelor’s degree Engineering (Automation / Electrical / Electronic / Mechatronic / BSEE BSME) or related field
5+ years of experience in the automation industry or related
Design/Drafting Tools AutoCAD and SolidWorks
Programming Logic Controllers (PLC) (e.g. Allen-Bradley, Siemens)
Configuring and designing HMI/OIT systems (e.g. Allen Bradley, National Instruments, Maple Systems)
Familiar with Industry Standards UL, CE & Vision Systems (e.g. Cognex, Keyence)
Familiar with various Motion Controllers/Actuators (e.g. IAI, Yasakawa)
Experience and skill in troubleshooting control system issues
Able to read, write, speak and understand English at a good comprehensive level

Job Responsibility

Elaborate the programming flow and develop this programming in PLC or automated controls
Perform panel integration for automated solutions
Examine, diagnose and correct malfunctions related to automated equipment
Must develop design details, modifications of components for manufacturing machines
Prepare or review specifications of blueprints of mechanical and electrical components of machines
Develop electrical design, schematics, and drawings in AutoCAD
Interpret mechanical design drawings for electrical requirements (e.g. SolidWorks)
Must design logical sequence of any programmable controller
On new automated machine must be capable of designing pneumatic, electrical & mechanical system
Must support production lines to maintain machines and manufacturing equipment working in excellent conditions

Fulltime

Select Country

Electrical & Instrumentation Engineer or Technologist

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?