Electrical Engineering Technician Job at Airswift Sweden (Spring)

Electrical Engineering Technician

We have an exciting opportunity for an Electrical Engineering Technician at our ...

Location

United States , Georgetown

Salary:

Not provided

Redwire Space

Expiration Date

Until further notice

Requirements

Associate degree (A.A.), or 5-6 years of related work experience or training
Current IPC‑J‑STD‑001S certification, or ability to obtain certification within 6 months of hire
Current IPC/WHMA-A-620S certification, or ability to obtain certification within 6 months of hire

Job Responsibility

Read and interpret assembly drawings, schematics, and bills of material
Perform high-quality soldering, including through‑hole and surface‑mount (SMT) techniques
Build and terminate cable harnesses
Apply solder stencils and solder paste accurately
Follow proper ESD protection and all safety procedures
Hand‑place or use assisted pick‑and‑place equipment to mount SMT components down to 0402 size
Apply conformal coating to printed circuit board assemblies
Identify electronic components and understand their applications
Build and test a wide range of analog and digital circuits
Operate test equipment such as digital multimeters, oscilloscopes, signal generators, and power supplies

What we offer

Highly competitive benefits package
Commitment to core values of Integrity, Innovation, Impact, Inclusion, and Excellence

Fulltime

Electrical Engineering Technician

At Prodrive we believe there’s no limit to what can be achieved when the brighte...

Location

United Kingdom , Banbury

Salary:

Not provided

Prodrive

Expiration Date

Until further notice

Requirements

Strong motorsport understanding of electrical systems
In-depth knowledge of motorsport (System 25) and Automotive wiring components, tooling and build practices
Basic understanding of various communication protocols such as CAN, LIN & Ethernet
Fluent in the use of computers and Microsoft Office Suite
Effective spoken and written communication skills
Ability to operate both independently and in a collaborative, team environment
Excellent organisation, prioritisation, and coordination skills
Ability to work effectively and thrive in a fast-paced environment
Ability to work under pressure
Willingness to travel and support cars on event or test

Job Responsibility

Assist with the design of electrical systems both on and off vehicle (harnesses, sensors, control units)
Build of development wiring harness and bench testing equipment, including Lab-cars and HIL Rigs
First build of pre-production harnesses
Diagnosis of electrical faults, working through problems methodically
Produce documentation (internal and customer facing) to assist with electrical installations
Defining requirement, specifying, and implementing electrical hardware
Liaising with other departments and customers to support the build and testing of parts, systems, and vehicles
Support onsite car build with troubleshooting of electrical and electronic issues
Support events (Race and Rally) when required
Creation and use of Cirris CH2 HIL Test routines

What we offer

An attractive salary which will grow in line with your ongoing development and impact
25 days holiday (which increases with long service) with an opportunity to purchase up to 15 extra days
Training opportunities for continuing professional development
Onsite subsidised staff restaurant
Car and pension salary sacrifice schemes
Cyclescheme
Exercise classes
Paid time off for volunteering
Consultations with our Fit 4 Life expert
Social events throughout the year

Fulltime

Electrical Engineering Technician

As an Electrical Engineering Technician on the Robot Service team, you will supp...

Location

United States , Palo Alto

Salary:

35.00 - 70.00 USD / Hour

1X Technologies

Expiration Date

Until further notice

Requirements

Hands-on experience in electrical engineering or electronics repair
Experience with fine-pitch hand soldering and hand crimping
Comfortable performing physical tasks such as setup, assembly, and post-processing
Ability to work on-site in Palo Alto
Strong communication skills and a proactive mindset

Job Responsibility

Re-work and assemble custom PCBs
Perform fine-pitch soldering and functional testing
Conduct wire harness re-work and assembly
Create documentation on rework and assembly processes
Collaborate closely with engineers to communicate issues and improvements

What we offer

Health, dental, and vision insurance
401(k) with company match
Paid time off and holidays

Electrical Engineering Technician

In this role, you will help build and test critical hardware products for Kodiak...

Location

United States , Mountain View

Salary:

Not provided

Kodiak Robotics

Expiration Date

Until further notice

Requirements

5+ years of experience working in an R&D or development lab environment in close collaboration with engineering staff
Experience with prototype builds, testing and operating test equipment
Experience reading and building harnesses from harness drawings
Comfortable using soldering iron, multimeter, and crimping tools
Good interpersonal skills with ability to work effectively with other individuals in a team or project setting
You are self-motivated and able to work with little supervision, consistently take the initiative to get things done, do things before being asked by others
Ability to consistently make timely decisions even in the face of complexity
balancing systematic analysis with decisiveness

Job Responsibility

Be a core member on the Electrical Engineering team responsible for building high quality harness assemblies
Perform incoming quality inspection for contract manufacturing harness builds
Organize and manage prototype test setups/fixtures
Perform testing on electrical components and assemblies
Perform soldering, mechanical assemblies, and subsystem builds
Manage BOMs and organize lab inventories
Maintain a clean, safe, and organized working environment throughout builds and engineering tests

What we offer

Competitive compensation package including equity and annual bonuses
Excellent Medical, Dental, and Vision plans through Kaiser Permanente, Cigna, and MetLife (including a medical plan with infertility benefits)
MetLife Legal Services, Identity & Fraud Protection, Hospital Indemnity Insurance, Accident Insurance, & Critical Illness Insurance
Accrued PTO, generous parental leave policies, and 10 paid holidays
Office perks: dog-friendly, free catered lunch, a fully stocked kitchen, and free EV charging
Long Term Disability, Short Term Disability, Life Insurance
Wellbeing Benefits - Headspace through Cigna, Calm through Kaiser, One Medical, Gympass, Spring Health through Cigna, Rula (mental health navigation)
Fidelity 401(k)
Commuter, FSA, Dependent Care FSA, HSA
Various incentive programs (referral bonuses, patent bonuses, etc.)

Fulltime

Electrical Engineering Technician

Electrical Engineering Technician position at a Medical Device Company in San Di...

Location

United States , San Diego

Salary:

23.00 - 26.00 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

High School Diploma
Conducting Test Protocols
Familiar with test equipment (meters, oscilloscopes etc.)
troubleshooting skills
medical device experience a plus
Skilled in own work area within an analytical / scientific method or operational process area
Expands skills and techniques in one skill area / process / method
Maintains appropriate licenses / training / certifications, as needed
Applies knowledge and skills to complete assigned tasks within own area
Works within established SOPs and / or scientific methods and adheres to quality guidelines

Job Responsibility

Responsible for building, testing and troubleshooting electrical/electronic circuitry and other systems used in finished equipment
Demonstrates working understanding of electronic and electro mechanical systems
Demonstrates working understanding of a variety of laboratory test equipment
Assembles prototype devices and systems
Fabricates electronic and electro mechanical test fixtures
Sets up and executes pre-defined subsystem/system qualification protocols with moderate supervision
Sets up data equipment to capture test data
Performs basic statistical analysis of results
Investigates, analyzes, repairs, and documents component or system level failures

Fulltime

New

Engineering Technician - Electrical (Controls)

This role is responsible for the independent application of relevant technical k...

Location

Australia , Alice Springs

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

Certificate III or equivalent in Electrotechnology or other relevant related discipline
At least 5 years of experience working in a similar environment
Must hold and be able to maintain an Australian “A” Grade Electrical License, OR hold and be able to maintain a minimum US State Journeyman Electrical License
Driver’s License
At least 18 years of age
Able to fluently read, write and speak English
Top-Secret Positive Vetting (TSPV) Department of Defence Security Clearance (Australian) or TS/SCI (U.S.) clearance w/ Poly
Medically fit to work and safely complete all physical tasks

Job Responsibility

System installation and maintenance: Install, wire, and maintain electrical and electronic equipment, control systems, and industrial machinery according to diagrams and specifications
Troubleshooting and repair: Diagnose and fix problems with automated systems, including PLCs, BMS, Power & Generation and other electrical components, to minimize downtime
Documentation and reporting: Keep detailed logs of maintenance and repairs, document process changes, and record data on equipment performance
Provide technical support to Operations, Engineering and Projects in a variety of engineering tasks in the installation, maintenance, repair, troubleshooting, calibration, testing, fabrication, construction and operation of diverse electrical equipment and systems in accordance with engineering specifications
Review and provide technical advice on proposed changes to facility infrastructure and configuration, from general concepts, SOP's, MOP's, Impact Assessments and Drawing packages
Provide technical recommendations, input, direction and advice on facilities system, infrastructure and equipment reliability, operation, maintenance, life-cycle management
Evaluate operational systems, equipment, processes and infrastructure in support of general and targeted optimization and improvement initiatives
Ensure, promote, and maintain health and safety practices/compliances at site and within the workplace
Any other reasonable duties as requested

Fulltime

Engineering Technician - Electrical (Controls)

This role is responsible for the independent application of relevant technical k...

Location

Australia , Alice Springs

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

Certificate III or equivalent
Field: Electrotechnology or other relevant related discipline
Must hold and be able to maintain an Australian “A” Grade Electrical License, OR hold and be able to maintain a minimum US State Journeyman Electrical License
Driver’s License
Trade qualifications plus at least 5 years of experience working in a similar environment
At least 18 years of age
Able to fluently read, write and speak English
Top-Secret Positive Vetting (TSPV) Department of Defence Security Clearance (Australian) or TS/SCI (U.S.) clearance w/ Poly

Job Responsibility

System installation and maintenance: Install, wire, and maintain electrical and electronic equipment, control systems, and industrial machinery according to diagrams and specifications
Troubleshooting and repair: Diagnose and fix problems with automated systems, including PLCs, BMS, Power & Generation and other electrical components, to minimize downtime
Documentation and reporting: Keep detailed logs of maintenance and repairs, document process changes, and record data on equipment performance
Provide technical support to Operations, Engineering and Projects in a variety of engineering tasks in the installation, maintenance, repair, troubleshooting, calibration, testing, fabrication, construction and operation of diverse electrical equipment and systems in accordance with engineering specifications
Review and provide technical advice on proposed changes to facility infrastructure and configuration, from general concepts, SOP's, MOP's, Impact Assessments and Drawing packages
Provide technical recommendations, input, direction and advice on facilities system, infrastructure and equipment reliability, operation, maintenance, life-cycle management
Evaluate operational systems, equipment, processes and infrastructure in support of general and targeted optimization and improvement initiatives
Ensure, promote, and maintain health and safety practices/compliances at site and within the workplace
Any other reasonable duties as requested

Fulltime

Electrical Engineering Technician II

The Electrical Engineering Technician is responsible for supporting the engineer...

Location

United States , Redmond

Salary:

30.44 - 38.21 USD / Hour

Sigma Design

Expiration Date

Until further notice

Requirements

Associate’s degree or technical certification in electrical technology or related field
Hands-on experience with cable harness manufacturing and assembly
IPC/WHMA-A-620 certification (required or willingness to obtain)
Ability to read and interpret cable drawings and wiring diagrams
Strong troubleshooting and organizational skills
Strong written and verbal English language communication skills
Excellent teamwork/interpersonal skills and the ability to communicate effectively
Demonstrated ability to work collaboratively, both within and outside one's own work group
Demonstrate commitment and adherence to Sigma Design Core Values
Pass a post-offer background verification

Job Responsibility

Manufacture cables to print for internal builds, including engineering builds
Route cables on robots and test rigs according to engineering specifications
Provide feedback to EE and FTE engineers on cable drawings and wiring diagrams for manufacturability and clarity
Respond to urgent service calls for robots in various locations, including updating, modifying, or replacing cables as needed
Troubleshoot cable-related issues in the field and on test rigs
Maintain cable harness manufacturing equipment (e.g., stripping machines, hand crimpers)
Ensure organization and cleanliness of the cable harness manufacturing area, including point-of-use components
Adhere to IPC/WHMA-A-620 standards in all cable manufacturing and assembly work
Maintain personal IPC/WHMA-A-620 certification and support team compliance
Strictly adhere to ESD (Electrostatic Discharge) workspace requirements, including proper use of ESD-safe equipment and procedures

What we offer

401(k) with up to 4% company match
quarterly bonus program
15-days of accrued PTO
9 company paid holidays
medical insurance
dental insurance
vision insurance
long-term disability insurance
life insurance

Fulltime

Select Country

Electrical Engineering Technician

Job Description

Job Responsibility

Requirements

Looking for more opportunities?

Electrical Engineering Technician

Electrical Engineering Technician

Electrical Engineering Technician

Electrical Engineering Technician

Electrical Engineering Technician

Electrical Engineering Technician

Engineering Technician - Electrical (Controls)

Engineering Technician - Electrical (Controls)

Electrical Engineering Technician II

Our AI answers in your language