Electrical Engineer Job at Service Stream (Melbourne)

Electrical Engineer

As Electrical Engineer at SeaPattern, you will be responsible for designing and ...

Location

Sweden , Linköping

Salary:

Not provided

Skill Rekrytering & Bemanning AB

Expiration Date

Until further notice

Requirements

A B.Sc. or M.Sc. in Electrical Engineering or a related field
At least 5 years of hands-on electrical engineering experience
Experience from industrial, marine, or renewable energy sectors
Solid knowledge of motor drive systems, frequency inverters, and grid-connected electrical systems
Experience designing and commissioning electrical cabinets
Confident in creating clear electrical schematics and technical documentation
Communicate professionally and fluently in English

Job Responsibility

Designing electrical system architectures for turbine platforms
Integrating OEM motor drives and grid-tied inverter systems
Designing low-voltage three-phase electrical cabinets
Producing wiring diagrams, schematics, and technical documentation
Supporting installation, commissioning, and testing activities on-site
Developing robust and safe electrical system solutions
Designing and commissioning electrical cabinets for low-voltage three-phase systems
Ensuring compliance with applicable grid connection standards and regulations
Supporting prototype development and field deployment activities
Creating and maintaining wiring diagrams, single-line diagrams, electrical schematics and technical documentation

Fulltime

Electrical Engineer

We are looking for a skilled and motivated Electrical Engineer to join our Day S...

Location

United Kingdom , London

Salary:

Not provided

Arriva London South Limited

Expiration Date

Until further notice

Requirements

Proven experience as an Electrical Engineer, Auto Electrician, or Electrical Technician, ideally within the bus, transport, automotive, heavy vehicle, rail, or related engineering sectors
Strong fault-finding, diagnostic, and problem-solving skills on complex electrical systems
Ability to read, understand, and interpret electrical schematics, wiring diagrams, and technical manuals
Good communication skills with the ability to work effectively both independently and as part of a team
A proactive, safety-conscious, and results-driven approach to work
Commitment to maintaining high engineering and quality standards

Job Responsibility

Carry out scheduled preventative maintenance and inspections on a wide range of vehicle electrical systems and equipment
Diagnose, investigate, and repair electrical faults efficiently to minimise vehicle downtime and maintain operational performance
Perform electrical installations, modifications, upgrades, and repairs in line with company procedures and industry regulations
Inspect, test, and commission electrical components and systems to ensure safety, reliability, and compliance
Interpret electrical schematics, wiring diagrams, technical drawings, and manufacturer documentation
Collaborate with engineering colleagues, supervisors, and operational teams to support fleet availability and service delivery
Accurately complete maintenance records, defect reports, and work documentation using company systems
Ensure all work is carried out in accordance with health and safety legislation, company policies, and engineering best practices
Contribute to continuous improvement initiatives aimed at improving vehicle reliability, efficiency, and maintenance processes
Provide technical support and share knowledge with colleagues when required

What we offer

Competitive salary and benefits package
Stable day-shift working pattern
Ongoing training and development opportunities
Modern workshop facilities and equipment
The opportunity to work within a supportive engineering team helping to keep London's bus network moving safely and efficiently

Fulltime

New

Electrical Engineer

We are seeking a dedicated Electrical Engineer with at least 1+ years of experie...

Location

United States , Lockport

Salary:

Not provided

BOLLINGER MISSISSIPPI SHIPBUILDING LLC

Expiration Date

Until further notice

Requirements

Minimum of 1 year of experience OR an Associate Degree in relevant field
Bachelor of Science in Electrical Engineering from an accredited university preferred
Must be familiar with CFR, USCG, NVIC, and IEEE rules that apply to various projects
Demonstrates good communication skills, including written and oral communication
Ability to use computer assisted engineering software and equipment in performing tasks.

Job Responsibility

Performs engineering work in designing and overseeing manufacture, construction, and installation of shipboard electrical systems including: power, lighting, interior communications, control systems, and electronics
Ensures designs meet regulatory standards related to electrical installations
Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes
Designs and directs engineering personnel in fabrication of test control apparatus and equipment, and determines methods, procedures, and conditions for testing products
Develops applications of controls, instruments, and systems for new commercial, domestic, and industrial uses
Directs activities to ensure that manufacturing, construction, installation, and operational testing conform to functional specifications and customer requirements
Directs and coordinates operation, maintenance, and repair of equipment and systems in field installations
Uses computer assisted engineering and design software and equipment to perform engineering tasks
Must follow all Company policies and procedures, including those relative to employee safety, environmental policy, and the principles of our quality system.

What we offer

Competitive Pay
Comprehensive Benefits Package
Hybrid Schedule Available
Career Development
Cutting-Edge Projects
Positive Work Environment & Company Values

New

Electrical Engineer

Completes engineering projects such as NPIs, Engineering Changes, RFQ responses,...

Location

United States , Atlanta

Salary:

Not provided

Scanfil

Expiration Date

Until further notice

Requirements

Assists/Leads in the development of manufacturing and assembly methods by designing and modifying equipment for building and assembling of electrical components
while complying with customer requirements and soliciting operator input
Evaluates electrical systems, products, components, and applications by designing and conducting research
applying knowledge of electricity and materials
Validates personnel, system's, production equipment and test capabilities to insure the successful on boarding of new customer products/builds
Prepares project status reports by collecting, analysing, and summarizing information and trends
recommending actions
Provides engineering information by answering questions and requests
Assists in the quality assurance process by designing, developing and providing training on electrical testing methods
testing finished products and system capabilities

Job Responsibility

Completes engineering projects such as NPIs, Engineering Changes, RFQ responses, Consults the production and repair teams on best practices etc.
Assists/Leads in the development of manufacturing and assembly methods by designing and modifying equipment for building and assembling of electrical components
while complying with customer requirements and soliciting operator input
Evaluates electrical systems, products, components, and applications by designing and conducting research
applying knowledge of electricity and materials
Validates personnel, system's, production equipment and test capabilities to insure the successful on boarding of new customer products/builds
Prepares project status reports by collecting, analysing, and summarizing information and trends
recommending actions
Provides engineering information by answering questions and requests
Assists in the quality assurance process by designing, developing and providing training on electrical testing methods

Fulltime

New

Electrical Engineer

Join our dynamic team as an Electrical Engineer, where you will play a pivotal r...

Location

United Kingdom , Leatherhead

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor's degree in Electrical Engineering or a related field
20-25 years of experience in design, engineering, and construction
Aramco experience preferred
Certification as a Professional Engineer is desirable

Job Responsibility

Review design packages for electrical systems and equipment, including Power & Distribution Transformers, motors, generators, High voltage/low voltage switchgear/Motor Control Center (MCC), distribution network, control equipment, and power outlets
Prepare the Project Design Basis Document as per the project scope
Compile the entire project load lists based on the project scope
Produce technical reports and specifications for electrical equipment not covered by Saudi Aramco Engineering Standards (SAES) and Material Specifications (SAMSS)
Manage electrical activities of engineering, procurement, and construction (EPC) contractors during the Front-End Engineering Development (FEED) and design phase
Conduct analysis of major equipment selected in the design package
Review and respond to technical queries
Monitor and review contractor performance and work quality
Ensure contractor design work complies with standards (SAES, SAMSS) and applicable codes/regulations
Assist Project Engineers in evaluating Material Requisitions (MR), Technical Bid Evaluations (TBE), and Award Recommendations (AR)

New

Electrical Engineer

Location

China , Suzhou

Salary:

Not provided

BorgWarner

Expiration Date

Until further notice

Requirements

Bachelor or above degree in electrical, electronic, Automation, Automotive engineering
At least 3 years work experience of electronics design, automotive electrical module design experience preferred
Experienced in High voltage/ Large current electrical system design, IGBT or MOSFET application and driving method
Experienced in micro-controller system design, Analog and digital circuit design
Be familiar with PCB layout design and low emission layout guideline
Very strong experience in WCCA, Circuit simulation
Understanding magnetic part design or simulation is preferred
Know EMC technology for Inverter/Converter product
Be familiar with automotive electronics methodology like Functional Safety, DFMEA, 8D...
English reading/writing is a must, fluent oral English is preferred

Job Responsibility

Design and develop motor drive inverters for Hybrid and Electric Vehicle systems
Ensure products meet all customers and internal electrical requirements
Develop hardware concept and circuit block, select electronics components, design the schematic and support ECAD engineer with layout design
Find root cause and corrective action to any electrical design related issues
Apply engineering CAD/CAE tools to perform design analysis and evaluation
Verify and validate designs on bench and in vehicle as necessary
Support module level validation
Follow engineering design process and product release procedures
Provide technical support to manufacturing during pilot run and production start-up
Participate in new product development with others as a team player

Fulltime

New

Electrical Engineer

Electrical Engineer (m/f/d). Are you ready to make the world a better place as p...

Location

Germany , Mannheim

Salary:

60000.00 GBP / Year

Darwin Recruitment GmbH

Expiration Date

Until further notice

Requirements

Successfully completed journeyman’s examination / training in the electrical trade, e.g. as an electrician or electronics technician for energy and building technology (m/f/d)
Solution-oriented, motivated, and possess a high degree of responsibility
Passionate about renewable energies
Hands-on mentality, curious, embrace new challenges
Handle confidential data responsibly and act in the best interest of the company
Ready to delve into the world of photovoltaic technology
A Class B driving licence is required

Job Responsibility

Planning of transferred projects (photovoltaics, electricity storage, charging infrastructure, connection of heat pumps and heating elements) together with sales and project management
AC-side installation of the photovoltaic system, electricity storage and charging infrastructure on site at the customer’s premises
Commissioning of the entire system, taking current safety standards into account, as well as integration of the management system
Filling out measurement protocols according to legal requirements and acceptance documents at the customer’s site
Fixing discrepancies, preventive maintenance and repair of installed systems
Proactive participation and support in day-to-day operations

What we offer

Permanent positions
Flat hierarchies
Interesting projects
Personal development
Open working culture
Continuing education

Fulltime

Electrical Engineer

This is an excellent opportunity for skilled electrical engineer to join our tea...

Location

Ireland , Dublin

Salary:

Not provided

Cundall

Expiration Date

Until further notice

Requirements

Degree level in Electrical or Building Services Engineering (MEng or BEng or equivalent)
relevant experience within a consultancy environment
design and coordination of electrical distribution and power generation, lighting, security systems
use of relevant design software including ProDesign (Amtech)
ideally Revit and Dialux
proven ability in producing low energy design solutions
carrying out site inspections and surveys
detail design development
passion for creative and intuitive design
excellent communication skills

Job Responsibility

Deliver innovative electrical design solutions for building projects across sectors including Government, Critical Systems, Healthcare, Workplace and Residential
work with a team of expert engineers and technicians
collaborate with colleagues of various disciplines
manage delivery of technically-excellent, profitable projects for high profile public and private clients
assume greater levels of responsibility and autonomy as professional skills develop
work towards achieving chartership with support from CIBSE and IET accredited programmes

What we offer

accredited professional development programmes from CIBSE and IET
support towards achieving chartership

Fulltime

Select Country

Electrical Engineer

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?

Electrical Engineer

Electrical Engineer

Electrical Engineer

Electrical Engineer

Electrical Engineer

Electrical Engineer

Electrical Engineer

Electrical Engineer

Electrical Engineer

Our AI answers in your language