Electrical Engineer II Job at Loram (Hamel)

Electrical Engineer II, RF Test Engineer

As an RF Test Engineer, your work will be essential in ensuring that the wireles...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, RF Engineering or similar discipline
Minimum of 3 years of hands-on RF and wireless device testing experience
Minimum of 3 years of wireless device test plan development for evaluating performance of various wireless interfaces against system and product requirements
Solid understanding of basic RF principles and theory, familiar with basic RF technology circuitry stages and topologies
Experience with modern RF technology including multiband Wi-Fi, Bluetooth, Cellular (LTE, 5G FR1), and multi-constellation GNSS and their test methodologies
Cellular experience is a must-have
High level of familiarity of cellular certification processes, test requirements, and test methods (PTCRB, CTIA, GCF, Carrier testing, etc), with hands on experience with device pretesting
Familiarity of worldwide EMC and intentional radiator regulatory standards and test methods (FCC, CE, ETSI, etc)
Proficient with operation of RF equipment such as RF communication testers (CMW, CMX, Litepoint), Network Analyzers, Spectrum Analyzers, RF power meters, Signal Generators, RF Test chambers
Experience with collaborative RF debug at device and circuit level

Job Responsibility

Design and implement test plans to evaluate the performance of wirelessly connected devices, ensuring they meet stringent product and regulatory requirements
Record RF test data and organize results, creating clear, actionable reports
Present findings and recommendations to cross-functional teams, enabling swift resolution of design challenges
Evaluate RF performance characteristics such as Total Radiated Power (TRP), Total Isotropic Sensitivity (TIS), and other over-the-air (OTA) metrics for cellular-enabled wireless devices using advanced equipment
Use instruments like spectrum analyzers and radio communication testers to assess conducted performance of wireless technologies, including LTE, 5G, Wi-Fi, Bluetooth, and GNSS
Support product field evaluations to validate RF performance under diverse real-world conditions, such as urban or rural environments
Investigate and debug issues such as poor sensitivity, low transmit power, or signal interference in wireless devices
Assist in the regulatory pre-certification and formal certification test efforts for hardware by preparing test samples, working closely with external test labs, troubleshooting issues, and ensuring successful completion of certification activities
Expand your knowledge of RF systems, testing methodologies, and certification standards while working closely with experienced engineers to develop your technical expertise and contribute to innovative designs

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs

Fulltime

Electrical Engineer II, Video Products - Sustaining

As a member of the Video Electrical Engineering Sustaining team, you will be res...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering or similar engineering discipline
Minimum 5 years of industry electronics design or electronics sustaining experience with mass-produced high-speed, high-density, portable, battery-powered devices, and/or low-power vehicular embedded electronics products
Proficient with identifying and implementing alternate source electronic component solutions and/or circuit design changes necessary to address design improvement, obsolescence, supply chain easement, etc, of released mass production electronics
Proficiency with general process of making design changes to Bills of Material (BOMs), schematics, layouts as needed for change requests
Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDO, other regulators), applications processors/microcontrollers, high speed memory subsystems (LPDDRx, eMMC), high- and low- speed communications interfaces (USB, Ethernet, I2C, SPI), audio components (digital and analog MEMs mics), RF subsystem components (Wifi, BT, LTE, GNSS), sensor systems, protection circuitry (ESD, voltage and current limiting components), SMT connectors, batteries and battery packs, PCBAs, Flex PCBAs, etc
Experience with High Speed circuit design and test (eg. USB3.x, Ethernet, RF, DDRx, etc)
Basic experience with RF integration and test (eg. Bluetooth, BLE, Wifi, GNSS, Cellular)
Strong hands-on proficiency with electronics characterization, verification, debug, and failure analysis using laboratory tools: Oscilloscope, power supplies, multimeters, custom jigs, spectrum analyzer, etc
Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired

Job Responsibility

Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics
Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
Execute bench verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc
Perform debug, failure analysis, and rework of electronics systems, circuits, and components
Using OrCAD Schematic tools, improve or modify embedded high-density, high-speed mixed-signal electronic circuits that integrate a wide array of electronics: application processors, microcontrollers, image sensors, high- and low-speed data interfaces, high-speed memory, switch-mode and linear power supplies, batteries, audio subsystems, RF transceivers, discrete digital and analog components, PCBs and Flexible PCBs, and a lot more
Team with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro or other layout tools
Test and evaluate basic RF performance of wireless circuitry (Cellular, Wifi, Bluetooth, GNSS, etc) in assigned in-market products
Map out test methods, perform system and component verification testing, and drive test plans for evaluating electronics design changes
Assess and document design change outcomes, test results, and related information and present information to design teams and management
Provide hardware support (sample preparation, documentation, debug) to the global regulatory compliance team for product certifications (FCC, IC, CE, PTCRB, etc)

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs

Fulltime

Electrical Engineer II

Contribute your expertise, skills, and experience as an Electrical Engineer II b...

Location

United States , Chicago

Salary:

Not provided

KDM Engineering

Expiration Date

Until further notice

Requirements

BS Electrical Engineering degree
4+ years of prior industry experience
Proficient in the use of all software needed to produce quality electrical design drawings such as AutoCAD, TED, Microsoft Office programs
Ability to work with a variety of individuals from various socio-economic, cultural and ethnic backgrounds
Must be able to interpret and analyze customer's electrical, architectural, and structural drawings, one-line diagram and load letters
Must be willing to comply with all pre-employment screening, including but not limited to, drug testing, reference verification, education and employment verification, and background screening
Must be legally authorized to work in the U.S.
Possess a valid Driver’s License

Job Responsibility

Design development, equipment layouts, construction drawings and bill of materials
Proficiency of power engineering theories and principles
Proficiency of practices of researching engineering and design issues, evaluating alternatives, making sound recommendations and preparing recommendations
Understanding of power distribution systems
Ability to understand complex initiatives across multiple teams/platforms
Demonstrated project management skills
Quantitative and analytical skill set
Excellent communication skills, both verbal and written
Ability to multitask and adapt to changing demands
Has knowledge of commonly-used concepts, practices, and procedures within the Engineering field

What we offer

Competitive Base Salary
Comprehensive Benefits Package
Company Paid Holidays
Great Work-Life Balance
Fun and Flexible Work Environment
Organization with People-First Mentality
Dynamic Leadership Team
A Culture that Values Your Input
Positive team environment
Competitive salaries

Fulltime

Electrical BIM Modeler II or Electrical BIM Designer

With minimal supervision, the Electrical BIM Modeler II performs routine to mode...

Location

United States , Tempe

Salary:

Not provided

Spectrum Engineers

Expiration Date

Until further notice

Requirements

2-5 years minimum experience in an architectural/engineering design field preferred
Proven capabilities and expertise in AutoCAD, REVIT MEP, and content creation
Able to set up projects in Revit and work in existing models
Modify and Create details
Spatial Coordination between disciplines
Modify and Create Families
Use/apply filters
Masterworks, Mail Manager, FTP functions
LOD levels 100 & 200, preferred 300 & 400
Cloud Modeling and Setup in BIM 360

Job Responsibility

Use REVIT MEP to perform modeling tasks and generate construction documents as assigned by engineers and project managers
Communicate directly with the project team to coordinate conflicts and discrepancies during the design process
Identify and correct any potential clashes between MEP disciplines and other trades
Collaborate directly with Architects and consultants to coordinate design deadlines and project needs
Perform tasks related to the construction administration process at the direction of the project managers

What we offer

Comprehensive Coverage: Full medical, dental, vision, and employee assistance program (EAP)
Voluntary Benefits: Life insurance, critical illness, hospital indemnity, short-term and long-term disability, identity force, etc
Wellness Program
Retirement Planning: 401k matching contributions

Fulltime

ASIC Verification Engineer II

We are looking for a new ASIC Verification Engineer to become part of the future...

Location

Costa Rica , Heredia

Salary:

Not provided

Hewlett Packard Enterprise

Expiration Date

Until further notice

Requirements

Bachelor's or Master's degree in Electrical Engineering, Computer engineering or equivalent
0-4 years of experience in VLSI design, verification or implementation
Experience or understanding of electrical engineering fundamentals, VLSI principles, digital logic, and computer architecture
Ability to apply analytical and problem solving skills
Hands-on experience in designing VLSI components, integrated circuitry, architectures and developing algorithms
Knowledge of a programming and scripting, hardware description language, electronic design automation (EDA), and/or FPGA tools
Coursework in VLSI design or VLSI concepts
Good written and verbal communication skills
mastery in English and local language

Job Responsibility

Verifies portions of computer/server architecture and algorithms based on established VLSI engineering principles
Collaborates and communicates with management regarding design status, project progress, and issue resolution
Verifies, simulates, and tests VLSI circuits
Ensures the VLSI designs meet quality, schedule, and cost goals for prototype or production solutions
Participates as a member of project team of other VLSI engineers and internal and outsourced development partners to develop reliable, cost effective and high quality solutions for VLSI prototypes and products
Provides guidance and mentoring to less experienced staff members

What we offer

Health & Wellbeing
Personal & Professional Development
Unconditional Inclusion

Fulltime

Hardware Test Engineer II

The Test Engineer II is responsible for creating test specifications, implementi...

Location

United States , Redmond

Salary:

90000.00 - 120000.00 USD / Year

Sigma Design

Expiration Date

Until further notice

Requirements

Bachelor's Degree in Mechanical Engineering, Electrical Engineering or related field
2-4 years of relevant test engineering experience
1+ years providing test support for opto, mechanical, and electrical consumer devices
Working knowledge of soldering techniques and electrical test equipment
Proficiency in Python programming
Ability to read and interpret wire diagrams and PCB schematics
Strong technical communication and documentation skills

Job Responsibility

Use product specifications to create basic test plans and document test results independently
Create and execute automated test plans to verify products meet requirements
Physical setup and deployment of test systems and equipment with minimal guidance
Work proficiently in both Windows and Linux systems
Develop basic script packages for test and data collection
Use and configure JTAG and similar test devices
Create and maintain test work instructions and flow diagrams
Actively participate in failure review processes including basic root cause analysis
Maintain and deploy software configurations in test environment
Communicate test requirements and results to teammates and stakeholders

What we offer

401(k) with up to 4% company match
quarterly bonus program
15-days of accrued PTO
9 company paid holidays
multiple options for medical insurance
dental insurance
voluntary benefits: vision, long-term disability, and life insurance

Fulltime

Engineering Technician II

The Electrician Engineering Technician provides engineering and installation sup...

Location

United States , Oklahoma City

Salary:

Not provided

Chickasaw Nation Industries, Inc (CNI)

Expiration Date

Until further notice

Requirements

Must be able to pass a background investigation
Must be able to travel up to 80% of the time
CDL license preferred
Obtain and maintain required state and local licenses for electrical work preferred
Experience working as an electrical technician focusing on power distribution systems
Experience in a construction related discipline such as utility installation, general electrical, heavy equipment operation, welding, concrete, and mechanical required
Relevant experience includes working with engineers and experience in writing / revising technical documentation for electronical systems and equipment and experience on power systems and equipment is preferred, as well as commercial electrical, lightning protection, fuel storage tank and engine generator
High school diploma or general education degree (GED) and a minimum of two to four (2-4) years of relevant experience and/or training, or equivalent combination of education/experience

Job Responsibility

Guarantees the enhancement and/or maintenance of existing power systems at various facilities
Independently provides support in the demolition and disposal of current powers system equipment, such as EG, UPS, electrical distribution equipment, fuel systems and fuel tanks
Examines and provides maintenance services for existing powers systems
Aids in the development and preservation of the overall production schedule for project deliverables
Provides technical and administrative support for engineering services
Supports the development of specifications for installation and data documentation used in the Site Survey process
Assists in surveys of existing power systems and associated equipment as well as the physical facility for adequacy of exiting equipment and to ensure new power system requirements are accommodated at all facilities
Troubleshoots failures in equipment and systems
Analyzes and conducts performance tests of electrical systems
Assists in engineering technical documentation

What we offer

Medical
Dental
Vision
401(k)
Family Planning/Fertility Assistance
STD/LTD/Basic Life/AD&D
Legal-Aid Program
Employee Assistance Program (EAP)
Paid Time Off (PTO) – (11) Federal Holidays
Training and Development Opportunities

Fulltime

Field Engineer II

Performs drive testing data collection of Macro networks. Responsible for data c...

Location

United States , Sacramento

Salary:

Not provided

MobileNet Services

Expiration Date

Until further notice

Requirements

BS/AS in Electrical Engineering, Computer Engineering, Mechanical Engineering or related degree or equivalent experience
Should have a good understanding of engineering concepts and must show aptitude and desire to learn and advance in a technical field
Must be able to understand technical procedures
Must be able to read maps, work a GPS and follow instructions
Proficient in office computer applications: Excel, Word and Outlook
Good analytical, interpersonal, and communication skills
Ability to work days or nights with minimal supervision
Must speak and write fluently in English
Candidates must be legal residents or authorized to work in the US for any employer
Must have and maintain a CLEAN and VALID state driver’s license

Job Responsibility

Performs drive testing data collection of Macro networks
Configure test devices to collect information for specified technology
Assist in implementing solutions and providing reports in a timely manner
Setup, calibrate and maintain testing equipment for various testing scenarios
Understand data collection expectations, deliverables, and time constraints
Create daily summary emails and timestamps for tracking purposes
Able to complete project deliverables with minimal direction
Interact with the engineering team, project management and with customers

What we offer

Vehicle and all travel expenses will be provided

Fulltime

Electrical Engineer II

Loram

Location:
United States , Hamel ▼
Georgetown

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
January 02, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Electrical Engineer II

Electrical Engineer II, RF Test Engineer

Electrical Engineer II, Video Products - Sustaining

Electrical Engineer II

Electrical BIM Modeler II or Electrical BIM Designer

ASIC Verification Engineer II

Hardware Test Engineer II

Engineering Technician II

Field Engineer II

Electrical Engineer II

Loram

Location:United States , Hamel ▼Georgetown

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:January 02, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Electrical Engineer II

Electrical Engineer II, RF Test Engineer

Electrical Engineer II, Video Products - Sustaining

Electrical Engineer II

Electrical BIM Modeler II or Electrical BIM Designer

ASIC Verification Engineer II

Hardware Test Engineer II

Engineering Technician II

Field Engineer II

Location:
United States , Hamel ▼
Georgetown

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
January 02, 2026