Electrical/Electronic Technician Job at Rullion (Golders Green, London)

New

Validation Test Technician

This role focuses on assembling and executing validation test setups for automot...

Location

Poland , Blonie

Salary:

Not provided

BorgWarner

Expiration Date

Until further notice

Requirements

Technical college degree in Electrical/Electronic or in mechatronics
At least 2 years of experience in testing, preferably in validation within the automotive or related industry
Familiarity with test equipment: Climatic chamber, Digital Multi-Meter(DMM), Power Supply, oscilloscopes, generators, dynometer and etc.
Proven ability by professional experience to execute electrical rack cabling works
Proven knowledge in industrial Electrical standards
Experience with basic circuit design
Good communication skills are essential
Fluency in English is required
Travel is required, at the initial stage for extended period of time. Then, up to 5% of the time

Job Responsibility

Build / assemble specific validation test racks and associated equipment’s
Responsible for validation test setup and test execution
Utilize and maintain automated monitoring system to guarantee in specifications test execution as well as peripheral systems to operate Part under test (load racks, harnesses, chillers, HV racks…)
Follow equipment calibration and preventive / reactive maintenance programs as laboratory representative
Apply and keep up-to-date all safety guidelines
Responsible for test raw data
Be involved in continuous improvement and maintenance of the validation test equipment

What we offer

Private Medicover medical care for the employee and their family
Co-financing for the sport card Multisport
Possibility to join the PZU insurance
Salary adequate to skills and experience
Co-financing for holidays
Hard and soft trainings

Fulltime

New

Maintenance Electrical Technician

What if you were given the opportunity and responsibility to make a difference? ...

Location

United States , Gilroy

Salary:

47.30 USD / Hour

International paper company

Expiration Date

Until further notice

Requirements

At least one year of successful mechanical and electrical/electronic troubleshooting and repair experience in a manufacturing facility
On-the-job success in safety, attendance and quality of work expected
Maintenance experience in corrugated a plus
Strong knowledgeable of lubrication, hydraulics, welding, pneumatics, electrical and electronics technologies
Excellent teamwork, cooperation and problem solving skills
Willingness to fully cross train in other technical areas to enhance capabilities
Willing and able to work second and third shifts, call-ins, holidays, and overtime as there is a constant demand for overtime in our maintenance department
Able to work with computer system for maintenance processes, stores and work orders
Provide own tools initially (tools worn out on the job will be replaced

Job Responsibility

Safely provide maintenance support to our fast-paced Sheet Facility that is equipped with technology ranging from simple to state of the art for the corrugated industry
Utilize both excellent mechanical skills and knowledge (pneumatics, hydraulics, bearings, power transmission, lubrication) and electrical/electronic skills and knowledge (PLCs, A/C, D/C motors and drives, schematics) in our continuous process manufacturing environment to achieve machine uptime metrics
Critical thinking
predictive and preventative maintenance, finding root cause of failure
Work positively with maintenance and operations teams to troubleshoot and solve problems
Excellent teamwork, cooperation and problem solving skills
Ability to work alone, with a partner, or as a member of a team maintaining safety, quality & productivity
Engaged in preventative maintenance processes through facility
Willingness to cross train and learn new skills in other technical areas to enhance capabilities
Able to work with computer system for maintenance processes, stores and work order

What we offer

Paid time off including Vacation and Holidays
Retirement, pension, and 401k Matching Program
Medical & Dental
Education & Development (including Tuition Reimbursement)
Life & Disability Insurance
Leadership training
Promotional opportunities

Fulltime

Electronics Box Build Technician

Autonomous robots are core to Dexory’s product offering. We design, build, and t...

Location

United Kingdom , Wallingford

Salary:

Not provided

Dexory Using

Expiration Date

Until further notice

Requirements

High school diploma or equivalent (City & Guilds / NVQ Level 3 in Electrical/Electronic Eng.)
technical certificate or associate degree in electrical, electronics or proven industry experience in related fields preferred
Experience of working in a technical function
both autonomously and as part of a team.
Experienced in manual build and assembly processes of complex, high precision mechanical and electrical systems
Accountable for build and preparation of complete products, on time as well as respective sub-assemblies
2+ years of experience in electronic or electromechanical assembly, particularly box build or control panel assembly.
Proficient in reading, creating and interpreting wiring diagrams, schematics, mechanical drawings, and work instructions.
Skilled in soldering, crimping, cable routing, and mechanical assembly.
Familiarity with IPC-A-610, IPC/WHMA-A-620, or similar workmanship standards.

Job Responsibility

Build of sub-assemblies as defined by the work instructions
Assembly of the product as defined by the work instructions
Support the assembly and debug process of the robots for various practices, as well as the wider business to see that objectives are achieved and excelled
Drive continuous improvement ensuring latest technologies and techniques are used throughout the product as well as assembly process.
Assemble complex electrical and electronic enclosures (box builds) according to mechanical drawings, wiring schematics and assembly instructions.
Route, bundle, and secure wire harnesses and cable assemblies within tight mechanical constraints.
Mount and install PCBs, power supplies, relays, terminal blocks, and other components.
Conduct continuity, insulation resistance, and functional tests on completed assemblies.
Perform troubleshooting and rework of faulty assemblies or wiring looms with minimal supervision.
Document build issues and provide feedback for design improvements or manufacturability.

What we offer

Private healthcare via Bupa with 24/7 medical helpline
Life insurance
Income protection
Pension: 4+% employee with option to opt into salary exchange, 5% employer
Employee Assistance Programme - mental wellbeing, financial and legal advice/support
25 holidays per year
Full meals onsite in Wallingford
Fun team events on and offsite, snacks of all kinds in the office

Fulltime

New

Maintenance Technician II

International Paper Company a leader in the industrial packaging industry is acc...

Location

United States , Fort Wayne

Salary:

34.37 USD / Hour

International paper company

Expiration Date

Until further notice

Requirements

High school degree (or G.E.D.) is required
Minimum two years of experience in an industrial manufacturing environment
a technical diploma/certification, or equivalent combination of education and experience
Strong troubleshooting skills
both electrical and mechanical
Must own full assortment of hand tools both metric and standard
Working knowledge of electrical safety principals, and experience with electrical troubleshooting is a must
Extensive knowledge and experience with, but not limited to: ammeters, multimeters, field programming equipment, ladder and PLC schematic
A thorough knowledge of electrical/electronic equipment
Good knowledge of industrial equipment along with the repair of equipment with minimal documentation and the ability to read electrical/mechanical prints

Job Responsibility

Troubleshoot and repair mechanical, hydraulic, pneumatic and electrical/electronic equipment including but not limited to programmable controls, numeral controls, power supplies, drives, gauges, and test equipment
Preventative maintenance, breakdown repairs, minimize equipment down time and perform small project activities
Read blueprints, schematics, and drawings
Maintain a clean, organized and safe work environment
responsible for proper waste disposal
Receptive to training and performing other duties as required

What we offer

medical, dental, disability, life and accident insurance
401(k) plan
night differential pay

Fulltime

Electrician/ Electrical Instrument Technician

The Electrical Instrument Technician maintains, constructs and repairs electrica...

Location

United States , Tucson

Salary:

39.38 - 40.30 USD / Hour

CalPortland

Expiration Date

Until further notice

Requirements

Physical requirements: sit, stand, stoop, bend for extended periods of time (up to 8 hrs.), climb, and lift up to 70 lbs.
Walk on all types of surfaces (uneven and/or slippery ground)
Ability to work in surroundings that include dust, vibration, heights and confined spaces
Must work in all weather conditions: heat, cold, wet, dry and/or dusty conditions and near hot kiln process
Exposure to cement, clay, limestone and various chemicals. See MSDS for more details
Able to work rotating and flexible hours
Able to work effectively both independently and as part of a team
Good verbal and written communication skills
Experience with or knowledge of all types of equipment used in the manufacturing of cement preferred
High school diploma/GED

Job Responsibility

Calibrates, designs, reconfigures, assembles, installs, inspects and maintains electrical systems and equipment, such as motors, generators, commutators, speed reducers, switchboards, circuit boards, lighting circuits, SCR, electronic control devices, computers and circuits, etc.
uses blueprints and related resources to complete tasks and checks/verifies work to ensure proper operation
Uses necessary instruments and tools such as voltmeters, ammeters, V.T.V.M’s, bridges, computers, laptops and any other industrial electrical/electronic analyzing equipment and tools needed in carrying out responsibilities
Sets up and uses rigging to handle tools and equipment, such as manlifts and cranes
climbs poles or uses mobile equipment to run, repair, modify, remove, clean, etc., power lines and all associated equipment
Designs, prepares, modifies and maintains logs, reports, charts, schematics, prints and any other paperwork incidental to duties
Maintains equipment, work areas, measuring instruments and tools
Performs minor mechanical work such as removing covers, lids or obstructions prior to electrical repair work
performs cutting and welding
paints electrical/electronic panel, switchgear, motor windings, insulating equipment, control station, etc.

What we offer

medical, dental and vision plans
life insurance
disability coverage
employee assistance program
retirement program
voluntary benefits

Fulltime

Sr. Electrical Engineer

Design electrical/electronic products for use in protection and control of power...

Location

United States , Highland

Salary:

96000.00 - 113000.00 USD / Year

Basler Electric

Expiration Date

Until further notice

Requirements

B.S.E.E. degree or equivalent
Minimum of five years’ electrical/electronic design experience
Able to work independently to successfully create electrical/electronic circuit designs
Able to clearly communicate, both verbally and in writing, with customers and various levels of personnel
Able to effectively use engineering design and simulation tools
Effective coordinative skills
Proficient computer skills

Job Responsibility

Assist in establishing design criteria to meet customer requirements
Develop the electrical/electronic design to meet the requirements of the design specification or individual customer specification as assigned
Exercise clear communicative and effective coordinative skills with various personnel and groups of varying technical expertise
System design that may include selection and design integration of controllers, power electronic bridges, protection equipment, power supplies, power and signal conductors, and HMI
Circuit design that may include high-speed digital, microprocessor, FPGA, communications, logic, HMI, analog, input sensing, output control, high power, power supplies, power bridges, and others
Coordinate electronic design efforts with firmware/software engineering for proper integration
Select standard parts and proven circuits when practical and calculate electrical stress information for components used in the design
Direct and/or perform the generation of electrical schematics
Evaluate design concepts through theoretical study, proof-of-concept and/or prototype hardware if needed, and design reviews as necessary
Supervise other engineers and technicians assigned to a particular project

What we offer

Medical, Prescription, Dental, Vision, Life, and AD&D insurance
a 401k plan
paid leaves for Vacation, Holiday, Sick, Jury Duty, Bereavement
tuition reimbursement

Fulltime

New

HR Generalist

In this contract to permanent position, you will play a pivotal role in assistin...

Location

United States , Fridley, Minnesota

Salary:

Not provided

Robert Half

Expiration Date

Until further notice

Requirements

At least 2 years of comprehensive HR Generalist experience across various functional areas
Experience in benefits administration, including open enrollment processes
Demonstrated ability to work effectively with a diverse workforce and provide hands-on support
Strong attention to detail combined with excellent communication and multitasking skills
Problem-solving skills and the ability to work independently without extensive guidance
Familiarity with Microsoft Office Suite and other HR systems
Customer-service orientation with a proactive approach to assisting staff
Knowledge and experience in handling employee relations, onboarding, and HR documentation

Job Responsibility

Coordinate onboarding processes for new hires, including equipment allocation and orientation, as well as manage offboarding procedures
Provide support in handling employee relations matters and disciplinary actions in alignment with company policies
Administer employee benefits programs, including enrollment, compliance, renewals, and communication of options
Lead benefit open enrollment processes and collaborate with brokers to ensure smooth implementation
Ensure adherence to local employment laws and regulations while maintaining company compliance
Maintain accurate employee records and required documentation to support HR operations
Respond to unemployment claims and represent the company during hearings as needed
Manage employee leaves of absence, ensuring compliance with applicable policies and regulations
Act as the primary liaison for office vendors and services, ensuring smooth operations
Assist with organizing employee events, special projects, and other HR initiatives as assigned

What we offer

medical, vision, dental, and life and disability insurance
eligible to enroll in our company 401(k) plan

Fulltime

New

Medical Front Desk Specialist

We are looking for a dedicated Medical Front Desk Specialist to join our healthc...

Location

United States , Minneapolis

Salary:

Not provided

Robert Half

Expiration Date

Until further notice

Requirements

Proficiency in patient scheduling and appointment management systems
Strong knowledge of medical front office operations and receptionist responsibilities
Familiarity with patient check-in and check-out procedures
Understanding of basic medical terminology and its application
Experience working with dental and medical software, such as Dentrix
Ability to verify insurance eligibility and process authorizations accurately
Skilled in coordinating physician and procedure scheduling
Competence in handling administrative tasks with attention to detail

Job Responsibility

Welcome patients and visitors with professionalism and ensure a positive first impression
Oversee patient check-in and check-out procedures, ensuring accuracy and efficiency
Schedule, confirm, and adjust appointments using specialized practice management software
Verify insurance details and secure pre-authorizations when required
Handle payment transactions, including collecting co-pays and processing cash or credit payments
Update and maintain accurate records for patients while adhering to organizational compliance standards
Collaborate with clinical staff to streamline patient flow and enhance service delivery
Perform administrative duties such as filing, scanning, and data entry to support office operations

What we offer

medical, vision, dental, and life and disability insurance
eligible to enroll in our company 401(k) plan

Electrical/Electronic Technician

Rullion

Location:
United Kingdom , Golders Green, London

Category:
IT - Administration

Contract Type:
Contract work

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 02, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Electrical/Electronic Technician

Validation Test Technician

Maintenance Electrical Technician

Electronics Box Build Technician

Maintenance Technician II

Electrician/ Electrical Instrument Technician

Sr. Electrical Engineer

HR Generalist

Medical Front Desk Specialist

Electrical/Electronic Technician

Rullion

Location:United Kingdom , Golders Green, London

Category:IT - Administration

Contract Type:Contract work

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 02, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Electrical/Electronic Technician

Validation Test Technician

Maintenance Electrical Technician

Electronics Box Build Technician

Maintenance Technician II

Electrician/ Electrical Instrument Technician

Sr. Electrical Engineer

HR Generalist

Medical Front Desk Specialist

Location:
United Kingdom , Golders Green, London

Category:
IT - Administration

Contract Type:
Contract work

Job Posted:
January 02, 2026