Electrical Definition Engineer Job at Airbus (Albacete)

Principal Electrical Engineer

We are seeking a highly experienced and technically driven Principal Electrical ...

Location

United States , Plymouth

Salary:

Not provided

Blackrock Neurotech

Expiration Date

Until further notice

Requirements

B.S. in Electrical Engineering, Biomedical Engineering, or related field
10+ years of experience in electrical design for active implantable medical devices (AIMDs), such as neurostimulators, pacemakers, or cochlear implants
Proven track record designing low-noise analog front ends, stimulation circuits, power management, and wireless telemetry (RF and inductive coupling)
Deep knowledge of implant power and safety considerations
Familiarity with closed-loop control systems and physiological signal acquisition
Experience operating within a quality system supporting Class III systems
Proficient in analog/digital mixed-signal design tools (e.g., SPICE, Altium, Cadence)
Strong understanding of embedded systems interfaces (SPI, I²C, UART)
Experience with simulation, modeling, and reliability analysis (Monte Carlo, tolerance analysis)
Knowledge of relevant standards: ISO 14708, IEC 60601, ISO 14971, ISO 13485, FDA Class III design controls

Job Responsibility

Develop circuit-level designs for ultra-low-power analog front ends, stimulation drivers, power management, and telemetry interfaces
Define and maintain electrical requirements, design specifications, and interface documents
Lead the design of production test equipment and processes
Perform schematic capture, circuit simulation, component selection, and PCB layout guidance for implantable and external system electronics
Collaborate with firmware and algorithm teams to enable closed-loop control of stimulation based on sensed physiological signals
Drive prototype development, bench testing, and design characterization for implantable hardware
Provide technical leadership to multidisciplinary design teams and mentor junior engineers
Champion design best practices, design for reliability (DfR), and design for manufacturability (DfM)
Driving verification and validation (V&V) activities, including unit, integration, and system-level testing to ensure reliability and traceability
Lead design verification testing (DVT) and verification planning to ensure compliance with medical device standards and safety requirements

Fulltime

Electrical Engineer – Renewable Gas

Greentalent is a recruiter specialized in search and selection of professionals ...

Location

Italy , Milan

Salary:

Not provided

Greentalent

Expiration Date

Until further notice

Requirements

3+ years’ experience in similar position in Power, O&G, Energy or similar fields
Bachelor's degree or technical diploma in electrical engineering or equivalent
Knowledge of electrical engineering tools (e.g. Eplan, Comos or similar) and of Italian and European standards
Fluent in English and Italian

Job Responsibility

Earthing design
E-Houses, Low Voltage (LV) Switchgear, variable frequency converters definition
Create detailed wiring diagrams, terminal diagrams, bills of materials (BOM), and cable lists
Work closely with mechanical, software, and project engineering teams to ensure seamless integration of control systems
Design and develop electrical schematics and panel layouts using EPLAN Electric P8 or similar

Professional Senior, Engineering - Electrical System Integrator (Cabin)

Location

Canada , Dorval

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

University degree in electrical or aerospace engineering or equivalent
More than 10 years of experience
Technical business aircraft interiors experience
Experience dealing with Supplier base
Experience in design or integration of complex electrical systems
Experience working with electrical schematics, test environment and debugging electrical systems
Experience with AutoCad or any relevant electrical conceptual software
Must be self-motivated, a team player, able to work with a minimum of supervision and have good skills in project management
Good communication skills in French and English
Demonstrate initiatives, and responsible of your actions

Job Responsibility

Review, analyze and understand customer specification documents
Define and design the configuration of cabin systems
Produce and validate electrical system definition documentation such as the electrical diagram
Coordinate with suppliers and internal stakeholders
Define and perform system functional and robustness tests on the test bench to test interfaces between systems and ensure the highest level of product quality under all conditions
Ensure and document compliance with aircraft certification rules (FAR, RAC, EU-OPS 1)
Support aircraft production to diagnose anomalies and resolve them quickly
Keep an open and innovative mindset to implement improvements in a continuous improvement spirit

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Professional Senior, Engineering - Electrical System Integrator (Cabin)

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

Canada , Dorval

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

University degree in electrical or aerospace engineering or equivalent
More than 10 years of experience
Technical business aircraft interiors experience
Experience dealing with Supplier base
Experience in design or integration of complex electrical systems
Experience working with electrical schematics, test environment and debugging electrical systems
Experience with AutoCad or any relevant electrical conceptual software
Must be self-motivated, a team player, able to work with a minimum of supervision and have good skills in project management
Good communication skills in French and English
Demonstrate initiatives, and you are responsible of your actions

Job Responsibility

Review, analyze and understand customer specification documents
Define and design the configuration of cabin systems
Produce and validate electrical system definition documentation such as the electrical diagram
Coordinate with suppliers and internal stakeholders
Define and perform system functional and robustness tests on the test bench to test interfaces between systems and ensure the highest level of product quality under all conditions
Ensure and document compliance with aircraft certification rules (FAR, RAC, EU-OPS 1)
Support aircraft production to diagnose anomalies and resolve them quickly
Keep an open and innovative mindset to implement improvements in a continuous improvement spirit

What we offer

Insurance plans (Medical, life insurance, and more)
Employee Assistance Program
Competitive base salary

Fulltime

Senior Professional, Engineering, Electrical Wiring Design

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

Canada , Mississauga

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration
Minimum of 10 years of relevant working experience in aerospace
Wiring design, wiring installation and/or wiring troubleshooting and electrical system integration knowledge
Strong sense of responsibility and good organization skills
Excellent communication skills including the ability to read/write in English
Good experience with CATIA V5 and CATIA V4 (CATWIRE module)
Experience with Capital (Mentor Graphics), PLM databases CDMA and Teamcenter an asset
Comfortable working with MS office suite

Job Responsibility

Review and approve Supplier technical engineering deliverables (ESSD/PCD) in part or in whole
Engage with electrical System stakeholders and manage workload scheduling
Provide technical engineering support on change management implementation (RFC, PCR)
Creation of wiring diagrams from System Definition Schematics (ESSD), preparation of Harness Reports with Harness Bill of Material (BOM) to meet customer configuration
Establish/improve measures to ensure/improve quality of engineering documents
Prepare work statements and reports (EDRN)
Checking of work prior to release and ensure compliance to various systems requirement
Select various components, connectors, backshells and other parts, involving researching parts catalogues, engineering specifications and contact with vendors if required
Be able to identify and manage engineering technical risks independently
Communicate lessons learned to other community members

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Electrical Engineer III

Arcfield was purpose-built to protect the nation and its allies through innovati...

Location

United States , Louisville, Colorado

Salary:

78649.80 - 136756.74 USD / Year

Arcfield

Expiration Date

Until further notice

Requirements

BS 5-7 Years, MS 3-5, PhD 0-2
Excellent documentation skills, including the preparation of Test Procedures & Reports, Interface Control Documents, and ECOs
Extensive experience in prototype development, debug, and test in a lab environment
Familiarity with various communication interfaces (I2C, SPI, UART, RS-232, RS-422, RS-485, CAN)
Proficiency in high-speed digital, analog, and mixed-signal circuit design, troubleshooting, and an excellent grasp of EE principles
Experience in system and sub-system testing including test design, procedure definitions, procurement, assembly, execution, analysis & reporting
Knowledge of cable and wire harness design
Experience with flight hardware safety protocols such as Electrostatic Discharge, clean room practices and critical lifting operations
Ability to travel to support meetings with customer and potential testing
Ability to work in a tight-knit team environment as well as self-driven for independent tasks

Job Responsibility

Works on assignments requiring considerable judgment and initiative
Develop solutions to routine technical problems of limited scope following detailed instructions
Performs an assortment of complex engineering duties such as the planning of manufacturing and the installation, operation, and maintenance of electrical apparatus
Provides existing support to activities in the use of electrical devices and energy for commercial, domestic, and industrial use
Design and develop electronics and circuits
Perform product testing and create models and prototypes
Develop and document electronic schematics for products
Performs a variety of engineering work in designing, planning and overseeing manufacture, construction, installation, operation, and maintenance of electric or electronic components, equipment, systems, facilities, and machinery used in generation, transmission, distribution, and utilization of electrical energy for domestic, commercial, and industrial consumption
Works directly with engineers in other disciplines to augment production size and value
May provide work leadership and training to lower level professional and technical staff

What we offer

Health Insurance
Life Insurance
Paid Time Off
Holiday Pay
Short Term and Long-Term Disability
Retirement and Savings
Learning and Development opportunities
wellness programs
other optional benefit elections

Fulltime

Electrical Engineer III

Arcfield was purpose-built to protect the nation and its allies through innovati...

Location

United States , Louisville

Salary:

78649.80 - 136756.74 USD / Year

Arcfield

Expiration Date

Until further notice

Requirements

BS 5-7 Years, MS 3-5, PhD 0-2
Excellent documentation skills, including the preparation of Test Procedures & Reports, Interface Control Documents, and ECOs
Extensive experience in prototype development, debug, and test in a lab environment
Familiarity with various communication interfaces (I2C, SPI, UART, RS-232, RS-422, RS-485, CAN)
Proficiency in high-speed digital, analog, and mixed-signal circuit design, troubleshooting, and an excellent grasp of EE principles
Experience in system and sub-system testing including test design, procedure definitions, procurement, assembly, execution, analysis & reporting
Knowledge of cable and wire harness design
Experience with flight hardware safety protocols such as Electrostatic Discharge, clean room practices and critical lifting operations
Ability to travel to support meetings with customer and potential testing
Ability to work in a tight-knit team environment as well as self-driven for independent tasks

Job Responsibility

Works on assignments requiring considerable judgment and initiative
Develops solutions to routine technical problems of limited scope following detailed instructions
Performs an assortment of complex engineering duties such as the planning of manufacturing and the installation, operation, and maintenance of electrical apparatus
Provides existing support to activities in the use of electrical devices and energy for commercial, domestic, and industrial use
Design and develop electronics and circuits
Perform product testing and create models and prototypes
Develop and document electronic schematics for products
Performs a variety of engineering work in designing, planning and overseeing manufacture, construction, installation, operation, and maintenance of electric or electronic components, equipment, systems, facilities, and machinery used in generation, transmission, distribution, and utilization of electrical energy for domestic, commercial, and industrial consumption
Works directly with engineers in other disciplines to augment production size and value
May provide work leadership and training to lower level professional and technical staff

What we offer

Health Insurance
Life Insurance
Paid Time Off
Holiday Pay
Short Term and Long-Term Disability
Retirement and Savings
Learning and Development opportunities
wellness programs
other optional benefit elections

Fulltime

Electrical Packaging Engineer

Lead the electrical packaging design of our next-generation optical communicatio...

Location

United Kingdom , Oxford

Salary:

Not provided

Salience Labs

Expiration Date

Until further notice

Requirements

Strong background in electrical packaging for large-scale semiconductor devices, including substrate and interposer design
Experience with high bump-count, large-area chip packaging and associated manufacturing workflows
Proven ability to manage packaging deliverables, including supplier engagement and cross-functional coordination
Knowledge of mechanical stress, warpage, thermal management, and yield improvement techniques
Comfortable working hands-on with prototypes and in a lab environment
Excellent communication skills, able to convey technical requirements to internal teams and suppliers

Job Responsibility

Lead the definition, design, and execution of electrical packaging solutions for photonic-electronic modules
Collaborate with optical packaging, manufacturing and hardware teams to integrate mechanical, thermal, and electrical requirements
Specify and oversee interposer designs, substrate layouts, and attachment methodologies
Own packaging deliverables from concept to production, including supplier coordination, documentation, and verification
Define and execute test plans for thermal performance, mechanical stress, reliability, and compliance
Troubleshoot packaging challenges, develop mitigation strategies, and drive yield improvements
Work closely with manufacturing partners, both locally and overseas, to ensure manufacturability and cost efficiency

Electrical Definition Engineer

Airbus

Location:
Spain , Albacete ▼
Getafe Area

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
February 06, 2026

Expiration:
February 22, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Electrical Definition Engineer

Principal Electrical Engineer

Electrical Engineer – Renewable Gas

Professional Senior, Engineering - Electrical System Integrator (Cabin)

Professional Senior, Engineering - Electrical System Integrator (Cabin)

Senior Professional, Engineering, Electrical Wiring Design

Electrical Engineer III

Electrical Engineer III

Electrical Packaging Engineer

Electrical Definition Engineer

Airbus

Location:Spain , Albacete ▼Getafe Area

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:February 06, 2026

Expiration:February 22, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Electrical Definition Engineer

Principal Electrical Engineer

Electrical Engineer – Renewable Gas

Professional Senior, Engineering - Electrical System Integrator (Cabin)

Professional Senior, Engineering - Electrical System Integrator (Cabin)

Senior Professional, Engineering, Electrical Wiring Design

Electrical Engineer III

Electrical Engineer III

Electrical Packaging Engineer

Location:
Spain , Albacete ▼
Getafe Area

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
February 06, 2026

Expiration:
February 22, 2026