Dimensional Quality Inspector II Job at ATI (Cudahy)

Quality Inspector - Electromechanical

We are seeking a dedicated and highly skilled Mechanical Inspector Level 2 to jo...

Location

United States , Spokane, WA; Tacoma, WA

Salary:

32.00 - 36.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

Extensive experience as a Quality Inspector or CMM Operator, with industry and commodity-specific expertise
Proficiency in dimensional inspection of precision tolerance parts
Strong knowledge and hands-on experience with all inspection tools
Ability to understand and interpret complex GD&T requirements and validate complex assemblies
Experience with multiple primary and secondary part numbers (e.g., brackets, clips, doublers, splices, brackets, drip shields, etc.)
To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Job Responsibility

Conduct visual, physical, and dimensional inspections (both in-process and final) of parts, per project specifications and requirements
Perform incoming inspections from external providers of products and services (e.g., nickel plating)
Conduct in-process and final inspections of critical features, including witness inspections (e.g., CMM program run)
Compile final inspection sign-off sheets and inspection packages
Verify that inspection equipment is capable of detecting defects and ensure inspection methodology aligns with drawing intent
Review and validate the justification for parts not inspected at final inspection
Audit and validate the execution of inspection plans as applicable
Document non-conformances using approved methods and submit non-conformance reports for customer disposition
Verify hardware cleanliness and absence of internal or external foreign object debris
Verify fasteners are properly installed

What we offer

Mileage Compensation ($0.70 per mile driven)

Parttime

Composites - Quality Inspector (Level II - Contract)

SQA Services is hiring immediately in Tallahassee, Alabama, for Level II Composi...

Location

United States , Tallassee; Dallas; Charleston; Chandler; Los Angeles; Wichita

Salary:

30.00 - 35.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

5+ years inspecting aerospace composite structures (Level II equivalent)
Strong defect recognition and dimensional inspection skills
Experience with durometer testing (certification provided if needed)
Ability to read engineering drawings and write clear inspection reports

Job Responsibility

Perform visual, dimensional, depth gauge, and Shore A durometer inspections on composite panels
Verify compliance to engineering drawings and specifications
Document inspection results in MES or digital quality systems
Support MRB verification and maintain a target throughput of 8 panels/day

What we offer

Airfare, hotel, rental car, and meals covered
Per Diem Available

Fulltime

Lead Quality Inspector

Reporting to the Quality Supervisor, you will be responsible for performing visu...

Location

United States , Houston

Salary:

65000.00 - 70000.00 USD / Year

Celeros Flow Technology

Expiration Date

Until further notice

Requirements

NACE Level II Coatings required
Supervisory experience required
Experienced in use of precision inspection equipment (ex., mics, callipers. Etc) to measure dimensional details as listed on drawings
Knowledge in reading & interpret blueprints, including GD&T
Experience in using and programming of Articulated ARMs is required
Knowledge of manufacturing processes and techniques, test equipment and procedures, and assembly applications
Use of hand and power tools
Strong computer skills including MS Office Suite skills, including Word, Excel, and Outlook
Experience with SAP (Required)
Ability to work in a team-oriented environment that is fast-paced and demanding

Job Responsibility

Performing visual, mechanical inspection of purchased or manufactured parts, in process or finished, to determine if the parts conform to specifications, drawings, designated codes and standards
Using precision measuring and testing equipment, including calipers, height gage, micrometre’s, surface plate, Articulated ARM, Optical Comparator to perform mechanical inspections
Preparing a Non-Conformance Report (NCR) for any part that does not meet specified requirements and processing it per established procedures
Document nonconformances in SAP- NCR module where needed and complete the transactions in SAP
Review and verification of materials received from vendors
Witnessing internal testing procedures to verify accuracy of results
Interpreting and executing an Inspection and Test Plan (ITP)
Interfacing with third-party inspectors to verify completion of required customer requests
Handling other assigned work-related functions as deemed necessary and appropriate by your immediate supervisor
Provide on-the-job training and guidance to Level I inspection personnel

What we offer

Health Insurance (effective on start date)
Dental/Vision (effective on start date)
Flexible Spending Accounts/Health Savings Accounts
Life Insurance/Disability/Accident/Critical Illness
401(k) Savings Plan with generous company match
Tuition Reimbursement
Paid time off/Generous Holiday Schedule

Fulltime

Mechanical Quality Inspector II

Yulista is a fast-paced government contractor specializing in high-mix, low volu...

Location

United States , Huntsville

Salary:

Not provided

Yulista Holdings

Expiration Date

Until further notice

Requirements

Ability to read and interpret complicated drawings, specifications, purchase orders, statement of work and standards to determine quality status
Use precision measuring instruments to confirm dimensional compliance
Ability to perform GD&T measurement to verifying the compliance of complex detailed or completed components and/or assemblies of aircraft and/or ground support vehicles
Be able to determine acceptance, rejection of materials presented for inspection and performing non-conformance reporting
Perform AS9102 First Article Inspections
Good organizational skills and utilize Microsoft Office software to accurately document and maintain associated paperwork and inspection results in a consistent and timely fashion
Familiarity with various specifications applicable to Defense products
Identify and communicate continuous improvement opportunities for the quality program for customers internal and external
Proficiency in GD&T (ASME Y 14.5)
Functional usage of surface plate and mechanical/optical inspection equipment to perform 3D inspection

Job Responsibility

Perform detailed mechanical inspection of products for compliance to the technical data package via in-process, finishing and final inspection phases
Other duties as directed by the assigned Supervision

Fulltime

Quality Inspector - Electromechanical - Level 2

We are seeking a dedicated and highly skilled Mechanical Inspector Level 2 to jo...

Location

United States , Denver

Salary:

32.00 - 36.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

Extensive experience as a Quality Inspector or CMM Operator, with industry and commodity-specific expertise
Proficiency in dimensional inspection of precision tolerance parts
Strong knowledge and hands-on experience with all inspection tools
Ability to understand and interpret complex GD&T requirements and validate complex assemblies
Experience with multiple primary and secondary part numbers (e.g., brackets, clips, doublers, splices, brackets, drip shields, etc.)
To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State

Job Responsibility

Conduct visual, physical, and dimensional inspections (both in-process and final) of parts, per project specifications and requirements
Perform incoming inspections from external providers of products and services (e.g., nickel plating)
Conduct in-process and final inspections of critical features, including witness inspections (e.g., CMM program run)
Compile final inspection sign-off sheets and inspection packages
Verify that inspection equipment is capable of detecting defects and ensure inspection methodology aligns with drawing intent
Review and validate the justification for parts not inspected at final inspection
Audit and validate the execution of inspection plans as applicable
Document non-conformances using approved methods and submit non-conformance reports for customer disposition
Verify hardware cleanliness and absence of internal or external foreign object debris
Verify fasteners are properly installed

What we offer

Mileage Compensation ($0.70 per mile driven)

Fulltime

Quality Source Inspector - Electromechanical - Level II

Location

United States , San Fernando Valley; Oxnard

Salary:

Not provided

SQA Services

Expiration Date

Until further notice

Requirements

Hands-on experience inspecting to engineering drawings with GD&T, including validating dimensional tolerances using hand inspection tools
Performed on-site source inspections at supplier facilities, including in-process, final, and witness inspections, and verified supplier compliance to inspection plans and drawing intent
Experience supporting or reviewing First Article Inspections (FAIs) and validating Certificates of Conformance (CoCs) and inspection documentation for accuracy, completeness, and traceability
Open to working 30–40 hours per week on first shift, on an as-needed basis, traveling to one or more supplier sites throughout the week to support source inspections
Agree to terms that role does not offer dental or vision benefits and provides medical benefits only after 2 months of employment if working 30+ hours per week or 120 hours per month

What we offer

Medical benefits after 2 months of employment if working 30+ hours per week or 120 hours per month

Fulltime

Quality Inspector - Mechanical - Level II

We’re hiring for a Quality Mechanical Inspector position in Hawthorne, CA, on a ...

Location

United States , Hawthorne

Salary:

30.00 - 35.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

3+ years of experience inspecting precision mechanical parts
Strong ability to read and interpret engineering drawings and GD&T
Proficient with hand inspection tools (tolerances ≥ .005”)
Comfortable working with digital systems and new software
Excellent attention to detail and visual inspection skills
Must pass a background check
ITAR compliance required
Must be a U.S. citizen or U.S. lawful permanent resident (green card holder)

Job Responsibility

Review and validate e-Cert packages for components, subassemblies, and final assemblies
Verify inspection records, test results, certifications, signatures, and approval workflows
Identify, document, and communicate discrepancies or nonconformances to Quality and Engineering
Ensure compliance with drawings, specifications, QMS requirements, and build plans, including traceability
Perform visual, dimensional, and physical inspections (incoming, in-process, final, and first article)
Conduct surface plate inspections and lot sampling as required
Use precision tools such as micrometers, calipers, height gauges, dial indicators, and profilometers
Inspect workmanship issues (burrs, scratches, fasteners, edge distance, damage)
Verify corrective actions and rework completion
Review shipping documentation and confirm proper packaging and preservation

What we offer

Mileage reimbursement at the US gov't rate ($0.725 per mile driven)

Fulltime

Quality Inspector - Mechanical - Level II

We’re hiring for a Quality Mechanical Inspector position in Woodinville, WA, on ...

Location

United States , Woodinville

Salary:

30.00 - 35.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

3+ years of experience inspecting precision mechanical parts
Strong ability to read and interpret engineering drawings and GD&T
Proficient with hand inspection tools (tolerances ≥ .005”)
Comfortable working with digital systems and new software
Excellent attention to detail and visual inspection skills
Must pass a background check
ITAR compliance required
Must be a U.S. citizen or U.S. lawful permanent resident (green card holder)

Job Responsibility

Review and validate e-Cert packages for components, subassemblies, and final assemblies
Verify inspection records, test results, certifications, signatures, and approval workflows
Identify, document, and communicate discrepancies or nonconformances to Quality and Engineering
Ensure compliance with drawings, specifications, QMS requirements, and build plans, including traceability
Perform visual, dimensional, and physical inspections (incoming, in-process, final, and first article)
Conduct surface plate inspections and lot sampling as required
Use precision tools such as micrometers, calipers, height gauges, dial indicators, and profilometers
Inspect workmanship issues (burrs, scratches, fasteners, edge distance, damage)
Verify corrective actions and rework completion
Review shipping documentation and confirm proper packaging and preservation

What we offer

Mileage reimbursement at the US gov't rate ($0.725 per mile driven)

Fulltime

Dimensional Quality Inspector II

ATI

Location:
United States , Cudahy

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 16, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Dimensional Quality Inspector II

Quality Inspector - Electromechanical

Composites - Quality Inspector (Level II - Contract)

Lead Quality Inspector

Mechanical Quality Inspector II

Quality Inspector - Electromechanical - Level 2

Quality Source Inspector - Electromechanical - Level II

Quality Inspector - Mechanical - Level II

Quality Inspector - Mechanical - Level II

Dimensional Quality Inspector II

ATI

Location:United States , Cudahy

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 16, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Dimensional Quality Inspector II

Quality Inspector - Electromechanical

Composites - Quality Inspector (Level II - Contract)

Lead Quality Inspector

Mechanical Quality Inspector II

Quality Inspector - Electromechanical - Level 2

Quality Source Inspector - Electromechanical - Level II

Quality Inspector - Mechanical - Level II

Quality Inspector - Mechanical - Level II

Location:
United States , Cudahy

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
January 16, 2026