Design Release Engineer, Low Voltage Systems Integration Job at ALTEN Technology USA (Long Beach)

Sr. Electrical Engineer, Sustaining

As a member of the TASER Electrical Engineering Sustaining team, you will be res...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering or similar engineering discipline
Six years of industry experience in electronics design and sustaining for mass-produced, handheld, embedded, battery-powered consumer devices
Expertise in identifying and implementing alternative electronic components or circuit design modifications to enhance performance, address obsolescence, and optimize supply chain efficiency for released mass-production electronics
Proficient in executing design changes across bill of materials, schematics, and layouts to support identified product changes/updates
Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDOs), microcontrollers, memory subsystems (FLASH, EEPROM), switches, connectors, communication interfaces (SPI, UART, I2C), indication LEDs, displays, LASERs, electromechanical transducers, hall effect sensors, inertial measurement units, accelerometers, protection circuitry (ESD, voltage, and current limiting components), discrete resistors/capacitors/inductors, rechargeable batteries and charging/balancing circuitry, RF subsystems (BLE, WiFi) for flex, rigid, and rigid-flex PCB designs
Strong hands-on expertise in electronics verification, characterization, and failure analysis, utilizing lab equipment such as oscilloscopes, power supplies, multimeters, custom test jigs and software related tools
Experience collaborating with laboratory technicians on circuit and component rework. Skilled in coordinating or performing component replacement and rework
hands-on soldering skills are a strong plus. Knowledgeable in rework processes, with the ability to execute directly or manage internal and external rework activities
Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired

Job Responsibility

Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics associated with TASER devices and accessories
Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
Execute bench-level verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, power supplies, multimeters, logic analyzers, and custom related test equipment and software tools
Perform debugging, failure analysis, and rework of electronic systems, circuits, and components to identify and confirm root cause of issues associated with updated design changes or RMA returns. This includes close collaboration with the failure analysis team to conduct CT scans on suspect assemblies and the use of functional circuit testers in production to validate final issue resolution
Using OrCAD schematic design tools, improve or modify embedded mixed-signal electronic circuitry that integrates high voltage power supply circuitry, microcontrollers, flashlight/indication/display/LASER circuitry and drivers, memory devices (FLASH/EEPROM), switch-mode and linear power supplies, batteries, high-speed and low-speed data interfaces, electromechanical transducers, and other discrete digital and analog components for flex, rigid, and rigid-flex PCB designs
Partner with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro and other layout tools
Develop test methods, execute system and component-level verification, and lead test planning efforts to evaluate electronics design changes
Team with validation and other engineering teams to evaluate and document design update outcomes, test results, and related information, then present findings to management for review and further action
Update and help to finalize assembly drawings, bill of materials, Geber files, and other design documentation needed to support updated design change releases
Knowledge sharing, mentoring, and close collaboration with other team members and departments

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs
snacks in our offices

Fulltime

Manager, Electrical Engineering

The Manager, Electrical Engineering, leads the design, development, and implemen...

Location

United States , Austin

Salary:

Not provided

Hyliion

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical, Mechanical, or Aerospace Engineering
10+ Years of Engineering Experience
High-voltage power electronics design, including AC/DC and DC/DC converters and battery systems
Low- and high-voltage wiring harness design
Electrical hardware architecture and circuit design for electromechanical systems
Knowledge of and compliance with applicable electrical and safety standards
Experience with real-time control systems, including PLCs and microcontrollers
Systems engineering and structured product development processes
Electrical hardware design, optimization, and cost reduction
Prototyping, testing, and validation using tools such as FMEA and DVP&R

Job Responsibility

Lead the electrical engineering team in the design and development of the KARNO generator systems, ensuring effective integration of mechanical, electromechanical, and control elements
Oversee the design and execution of electrical hardware, control modules, and system-level solutions, ensuring a cohesive and integrated development approach
Integrate electrical and control modules into final products and collaborate with suppliers to ensure compliance with quality, performance, and safety requirements
Define electrical design requirements and technical best practices
ensuring both electrical and control components align with industry standards for hybrid power generation
Translate system requirements into system- and sub-system specifications for electrical, mechanical, and control components, supporting seamless integration across industrial and commercial applications
Provide coaching and leadership across engineering and operations teams, fostering a collaborative, innovative, and high-performing work environment
Ensure compliance with applicable safety and regulatory standards for electrical systems used in hybrid generator products
Collaborate closely with project managers and cross-functional teams—including mechanical, electrical, control, and supply chain—to meet project milestones and deliverables
Lead technical issue resolution at the hardware and component level, organizing troubleshooting efforts, conducting root cause analysis, and implementing corrective actions to improve system reliability

What we offer

Medical Plans, with PPO or HDHP options
Dental Plans, with buy-up option
Vision Plan
Life Insurance and Accidental Death & Dismemberment Plans, with buy-up options
Short Term Disability, paid for by the company
Long Term Disability, paid for by the company
Flexible Spending Accounts (FSA)
Health Savings Account (HSA)
401k/Roth 401k
Voluntary Accident Plans

Fulltime

Electrical Engineer II, Video Products - Sustaining

As a member of the Video Electrical Engineering Sustaining team, you will be res...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering or similar engineering discipline
Minimum 5 years of industry electronics design or electronics sustaining experience with mass-produced high-speed, high-density, portable, battery-powered devices, and/or low-power vehicular embedded electronics products
Proficient with identifying and implementing alternate source electronic component solutions and/or circuit design changes necessary to address design improvement, obsolescence, supply chain easement, etc, of released mass production electronics
Proficiency with general process of making design changes to Bills of Material (BOMs), schematics, layouts as needed for change requests
Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDO, other regulators), applications processors/microcontrollers, high speed memory subsystems (LPDDRx, eMMC), high- and low- speed communications interfaces (USB, Ethernet, I2C, SPI), audio components (digital and analog MEMs mics), RF subsystem components (Wifi, BT, LTE, GNSS), sensor systems, protection circuitry (ESD, voltage and current limiting components), SMT connectors, batteries and battery packs, PCBAs, Flex PCBAs, etc
Experience with High Speed circuit design and test (eg. USB3.x, Ethernet, RF, DDRx, etc)
Basic experience with RF integration and test (eg. Bluetooth, BLE, Wifi, GNSS, Cellular)
Strong hands-on proficiency with electronics characterization, verification, debug, and failure analysis using laboratory tools: Oscilloscope, power supplies, multimeters, custom jigs, spectrum analyzer, etc
Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired

Job Responsibility

Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics
Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
Execute bench verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc
Perform debug, failure analysis, and rework of electronics systems, circuits, and components
Using OrCAD Schematic tools, improve or modify embedded high-density, high-speed mixed-signal electronic circuits that integrate a wide array of electronics: application processors, microcontrollers, image sensors, high- and low-speed data interfaces, high-speed memory, switch-mode and linear power supplies, batteries, audio subsystems, RF transceivers, discrete digital and analog components, PCBs and Flexible PCBs, and a lot more
Team with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro or other layout tools
Test and evaluate basic RF performance of wireless circuitry (Cellular, Wifi, Bluetooth, GNSS, etc) in assigned in-market products
Map out test methods, perform system and component verification testing, and drive test plans for evaluating electronics design changes
Assess and document design change outcomes, test results, and related information and present information to design teams and management
Provide hardware support (sample preparation, documentation, debug) to the global regulatory compliance team for product certifications (FCC, IC, CE, PTCRB, etc)

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs

Fulltime

New

Low Voltage Systems Engineer

We’re ALTEN Technology USA, an engineering company helping clients bring groundb...

Location

United States , Long Beach

Salary:

115000.00 - 135000.00 USD / Year

ALTEN Technology USA

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical Engineering, Computer Science, or related field
5+ years of experience in an engineering setting involving complex systems development
Detailed knowledge of product development process from design, development, validation and integration
Proven experience driving progress on multiple projects across multiple locations and timelines
Strong written and verbal communication skills
Expertise with Jira and Confluence for project management
Experience with JAMA for requirements documentation
Experience with project management tools such as Smartsheet or MS Project
Experience designing and releasing mechanical and electromechanical systems
CAD proficiency in assembly and part design, FEA, and 2D drawings. Catia and 3D Experience preferred

Job Responsibility

Execute the end-to-end release actions for various electronic components within the Product Lifecycle Management system (3DX)
Drive engineering teams towards containment and resolution of issues raised from design reviews, virtual builds, and build events to protect the program’s schedule to start of production (SOP) and ongoing production
Manage open issues list for internal and external projects, driving team to close items on time and at a high level of quality.
Maintain supplier relationships in collaboration with Supply Chain team to ensure timely deliveries for build events
Support key decisions working cross-functionally across engineering, finance, and strategy to reach the right conclusions
Effectively present information to technical or non-technical audiences ranging from team level meetings through to Executive briefs and updates
Anticipate and manage platform risks, perform trade-offs and identify contingency plan(s) or alternate approaches to mitigate risks and provide strong leadership to team in circumstances where there may be uncertainty or ambiguity
Collaborate with engineers, designers, technicians, and suppliers to design, procure and build physical test assets.

New

Low Voltage Component Engineer

We’re ALTEN Technology USA, an engineering company helping clients bring groundb...

Location

United States , Long Beach

Salary:

115000.00 - 135000.00 USD / Year

ALTEN Technology USA

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical Engineering, Computer Science, or related field
5+ years of experience in an engineering setting involving complex systems development
Detailed knowledge of product development process from design, development, validation and integration
Proven experience driving progress on multiple projects across multiple locations and timelines
Strong written and verbal communication skills
Expertise with Jira and Confluence for project management
Experience with JAMA for requirements documentation
Experience with project management tools such as Smartsheet or MS Project
Experience designing and releasing mechanical and electromechanical systems
CAD proficiency in assembly and part design, FEA, and 2D drawings. Catia and 3D Experience preferred

Job Responsibility

Execute the end-to-end release actions for various electronic components within the Product Lifecycle Management system (3DX)
Drive engineering teams towards containment and resolution of issues raised from design reviews, virtual builds, and build events to protect the program’s schedule to start of production (SOP) and ongoing production
Manage open issues list for internal and external projects, driving team to close items on time and at a high level of quality.
Maintain supplier relationships in collaboration with Supply Chain team to ensure timely deliveries for build events
Support key decisions working cross-functionally across engineering, finance, and strategy to reach the right conclusions
Effectively present information to technical or non-technical audiences ranging from team level meetings through to Executive briefs and updates
Anticipate and manage platform risks, perform trade-offs and identify contingency plan(s) or alternate approaches to mitigate risks and provide strong leadership to team in circumstances where there may be uncertainty or ambiguity
Collaborate with engineers, designers, technicians, and suppliers to design, procure and build physical test assets.

New

Senior Electrical Engineer, Sustaining

As a member of the TASER Electrical Engineering Sustaining team, you will be res...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering
Six years of industry experience in electronics design and sustaining for mass-produced, handheld, embedded, battery-powered consumer devices
Expertise in identifying and implementing alternative electronic components or circuit design modifications to enhance performance, address obsolescence, and optimize supply chain efficiency for released mass-production electronics
Proficient in executing design changes across bill of materials, schematics, and layouts to support identified product changes/updates
Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDOs), microcontrollers, memory subsystems (FLASH, EEPROM), switches, connectors, communication interfaces (SPI, UART, I2C), indication LEDs, displays, LASERs, electromechanical transducers, hall effect sensors, inertial measurement units, accelerometers, protection circuitry (ESD, voltage, and current limiting components), discrete resistors/capacitors/inductors, rechargeable batteries and charging/balancing circuitry, RF subsystems (BLE, WiFi) for flex, rigid, and rigid-flex PCB designs
Strong hands-on expertise in electronics verification, characterization, and failure analysis, utilizing lab equipment such as oscilloscopes, power supplies, multimeters, custom test jigs and software related tools
Experience collaborating with laboratory technicians on circuit and component rework. Skilled in coordinating or performing component replacement and rework
hands-on soldering skills are a strong plus. Knowledgeable in rework processes, with the ability to execute directly or manage internal and external rework activities
Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired

Job Responsibility

Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics associated with TASER devices and accessories
Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
Execute bench-level verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, power supplies, multimeters, logic analyzers, and custom related test equipment and software tools
Perform debugging, failure analysis, and rework of electronic systems, circuits, and components to identify and confirm root cause of issues associated with updated design changes or RMA returns. This includes close collaboration with the failure analysis team to conduct CT scans on suspect assemblies and the use of functional circuit testers in production to validate final issue resolution
Using OrCAD schematic design tools, improve or modify embedded mixed-signal electronic circuitry that integrates high voltage power supply circuitry, microcontrollers, flashlight/indication/display/LASER circuitry and drivers, memory devices (FLASH/EEPROM), switch-mode and linear power supplies, batteries, high-speed and low-speed data interfaces, electromechanical transducers, and other discrete digital and analog components for flex, rigid, and rigid-flex PCB designs
Partner with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro and other layout tools
Develop test methods, execute system and component-level verification, and lead test planning efforts to evaluate electronics design changes
Team with validation and other engineering teams to evaluate and document design update outcomes, test results, and related information, then present findings to management for review and further action
Update and help to finalize assembly drawings, bill of materials, Geber files, and other design documentation needed to support updated design change releases
Knowledge sharing, mentoring, and close collaboration with other team members and departments

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs
snacks in our offices

Fulltime

Power Electronics Engineer-Automotive

Vicor is seeking a highly motivated and skilled Power Electronics Engineer for i...

Location

United States , Andover

Salary:

105000.00 - 130000.00 USD / Year

Vicor Corp.

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, Power Electronics, or a related field
Minimum of 3+ years of experience in power electronics engineering, preferably involving Automotive or Electric Vehicle (EV) power systems and high-voltage DC/DC solutions
Design, analysis, and hands-on validation of power electronics systems using Vicor Modules
Expertise in power management and the application of high-voltage and bi-directional DC/DC converter topologies
Proficiency in multi-layer PCB design techniques
Familiarity with industry EMI standards and test methods
Experience designing, troubleshooting and testing filters for compliance including magnetics design and high frequency low noise PCB layout
Proficiency in power electronics design and simulation software, such as LTspice, SIMPLIS, Altium, Power DC/Power SI or similar tools
Ability to effectively present complex technical topics to internal and external audiences of different backgrounds

Job Responsibility

Strategic Product Definition: Collaborate proactively with engineering team and field application team to ensure product specifications are aligned with evolving customer needs and market opportunities
NPI Process Support: Lead new product development activities, guiding products through the entire NPI process from concept to Release-to-Production (RTP)
System Validation: Develop system test boards, comprehensive test plans, bench automation, and test results documentation to support system verification
System Design: Provide technical support for the design, development, and implementation of power electronics solutions across the automotive portfolio
Customer Design and Integration: Serve as a technical resource between Vicor and its strategic automotive customers
Model and Tool Development: Define and assist to develop state of the art models and tools to help customers select, design, and optimize their power solutions using Vicor Modules
Market Readiness: Develop and deliver all technical collateral, including datasheets, user guide, reference designs, and application notes, necessary for a successful product launch
Technical Training: Develop and deliver technical training material on new products and systems to Field Application Engineers (FAEs) and global sales teams
Collaboration: Partner closely with Sales, Marketing, and Engineering teams to ensure seamless project execution and maximum customer satisfaction

New

Electrical Engineer II, Video Products - Sustaining

As a member of the Video Electrical Engineering Sustaining team, you will be res...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering or similar engineering discipline
Minimum 5 years of industry electronics design or electronics sustaining experience with mass-produced high-speed, high-density, portable, battery-powered devices, and/or low-power vehicular embedded electronics products
Proficient with identifying and implementing alternate source electronic component solutions and/or circuit design changes necessary to address design improvement, obsolescence, supply chain easement, etc, of released mass production electronics
Proficiency with general process of making design changes to Bills of Material (BOMs), schematics, layouts as needed for change requests
Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDO, other regulators), applications processors/microcontrollers, high speed memory subsystems (LPDDRx, eMMC), high- and low- speed communications interfaces (USB, Ethernet, I2C, SPI), audio components (digital and analog MEMs mics), RF subsystem components (Wifi, BT, LTE, GNSS), sensor systems, protection circuitry (ESD, voltage and current limiting components), SMT connectors, batteries and battery packs, PCBAs, Flex PCBAs, etc
Experience with High Speed circuit design and test (eg. USB3.x, Ethernet, RF, DDRx, etc)
Basic experience with RF integration and test (eg. Bluetooth, BLE, Wifi, GNSS, Cellular)
Strong hands-on proficiency with electronics characterization, verification, debug, and failure analysis using laboratory tools: Oscilloscope, power supplies, multimeters, custom jigs, spectrum analyzer, etc
Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired

Job Responsibility

Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics
Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
Execute bench verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc
Perform debug, failure analysis, and rework of electronics systems, circuits, and components
Using OrCAD Schematic tools, improve or modify embedded high-density, high-speed mixed-signal electronic circuits that integrate a wide array of electronics: application processors, microcontrollers, image sensors, high- and low-speed data interfaces, high-speed memory, switch-mode and linear power supplies, batteries, audio subsystems, RF transceivers, discrete digital and analog components, PCBs and Flexible PCBs, and a lot more
Team with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro or other layout tools
Test and evaluate basic RF performance of wireless circuitry (Cellular, Wifi, Bluetooth, GNSS, etc) in assigned in-market products
Map out test methods, perform system and component verification testing, and drive test plans for evaluating electronics design changes
Assess and document design change outcomes, test results, and related information and present information to design teams and management
Provide hardware support (sample preparation, documentation, debug) to the global regulatory compliance team for product certifications (FCC, IC, CE, PTCRB, etc)

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs

Fulltime

Design Release Engineer, Low Voltage Systems Integration

ALTEN Technology USA

Location:
United States , Long Beach

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
February 16, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Design Release Engineer, Low Voltage Systems Integration

Sr. Electrical Engineer, Sustaining

Manager, Electrical Engineering

Electrical Engineer II, Video Products - Sustaining

Low Voltage Systems Engineer

Low Voltage Component Engineer

Senior Electrical Engineer, Sustaining

Power Electronics Engineer-Automotive

Electrical Engineer II, Video Products - Sustaining

Design Release Engineer, Low Voltage Systems Integration

ALTEN Technology USA

Location:United States , Long Beach

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:February 16, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Design Release Engineer, Low Voltage Systems Integration

Sr. Electrical Engineer, Sustaining

Manager, Electrical Engineering

Electrical Engineer II, Video Products - Sustaining

Low Voltage Systems Engineer

Low Voltage Component Engineer

Senior Electrical Engineer, Sustaining

Power Electronics Engineer-Automotive

Electrical Engineer II, Video Products - Sustaining

Location:
United States , Long Beach

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
February 16, 2026