Defense - Quality Inspector Job at Boeing (Wichita)

Defense - Quality Inspector

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , Wichita

Salary:

24.81 - 41.27 USD / Hour

Boeing

Expiration Date

Until further notice

Requirements

Candidates must be eligible to apply for, obtain, and maintain a Department of Defense (DoD) security clearance
Must be able to secure Program Access approval
All applicants must be willing and able to work any shift, including alternative work weeks
Experience required in one or more of the following: familiarity with MBD, primarily Catia V5 and Enovia, including GD&T tolerancing
familiarity in SAP, Military Enterprise Resource Planner (mERP), but not required
cross-trained to support both major assembly and composite fabrication, so experience in both disciplines is preferred
Sikorsky DQR experience preferred but not required
Composite Inspection
Assembly Inspection
Fabrication Inspection

Job Responsibility

Possess the skills/knowledge to perform in one or more of the following classifications: Systems/Payload Structures Mechanic A Assembly Mechanic A Fuselage Assembly Mechanic A Underwing Composites Mechanic A Metals Mechanic a Process Mechanic A
Ability to certify for Systems inspection function
Assist in training as applicable to job roles
Ability to investigate and document Root Cause analysis and Corrective action (non-disciplinary)
Determine and submit test and investigation statements
Perform process and hardware audits and surveillances
Perform all functions associated with Level B requirements

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
Kansas Tax Credit: Join Spirit AeroSystems’ Kansas team and you may be eligible for a $5,000 state of Kansas Aviation tax credit for up to five years

Fulltime

Mechanical Quality Inspector II

Yulista is a fast-paced government contractor specializing in high-mix, low volu...

Location

United States , Huntsville

Salary:

Not provided

Yulista Holdings

Expiration Date

Until further notice

Requirements

Ability to read and interpret complicated drawings, specifications, purchase orders, statement of work and standards to determine quality status
Use precision measuring instruments to confirm dimensional compliance
Ability to perform GD&T measurement to verifying the compliance of complex detailed or completed components and/or assemblies of aircraft and/or ground support vehicles
Be able to determine acceptance, rejection of materials presented for inspection and performing non-conformance reporting
Perform AS9102 First Article Inspections
Good organizational skills and utilize Microsoft Office software to accurately document and maintain associated paperwork and inspection results in a consistent and timely fashion
Familiarity with various specifications applicable to Defense products
Identify and communicate continuous improvement opportunities for the quality program for customers internal and external
Proficiency in GD&T (ASME Y 14.5)
Functional usage of surface plate and mechanical/optical inspection equipment to perform 3D inspection

Job Responsibility

Perform detailed mechanical inspection of products for compliance to the technical data package via in-process, finishing and final inspection phases
Other duties as directed by the assigned Supervision

Fulltime

Temporary Quality Inspector Technician 3

We have a current opportunity for a Temporary - Quality Inspector Technician 3 f...

Location

United States , Longmont, Colorado

Salary:

25.00 - 35.00 USD / Hour

Redwire Space

Expiration Date

Until further notice

Requirements

High school diploma or equivalent with 3+ years of experience in a Quality related role
Experience with soldering and electronics assembly inspections
Inspection experience with calibrated equipment, examples: calipers, micrometers, gauge pins and mechanical inspection devices
Experience with reviewing engineering drawings, blueprints, schematics and technical documents
US Citizen or US Person as defined by ITAR regulations

Job Responsibility

Inspect parts, assemblies, and related manufacturing and test process outputs for product and contractual compliance
Verify supplier compliance with all purchase order requirements, specifications and/or drawing requirements
Demonstrate commitment to documentation and traceability throughout the organization
Accurately document the results of the inspections
Maintain part data in the ERP system for traceability (inspection reports, COC, traceability information, test reports)
Manage the calibrated equipment library and calibration activities
Quality assurance record retention, support build activities, perform quality review of work orders, part labeling and collect data for End Item Data Package
Maintain workplace safety to people and products through proper process controls
Sustain a culture of continuous improvement
May assist and train less experienced personnel in inspection processes and equipment use

Fulltime

Quality Inspector

Hermeus is a high-speed aircraft manufacturer focused on the rapid design, build...

Location

United States , Los Angeles

Salary:

30.00 - 50.00 USD / Hour

Hermeus

Expiration Date

Until further notice

Requirements

High school diploma or equivalent required
associate degree or technical certification in mechanical inspection, manufacturing, or metrology preferred
3+ years of hands-on experience in mechanical inspection within aerospace, defense, or high-precision manufacturing environments
Strong proficiency with precision measurement tools and metrology equipment, including CMMs and optical measurement systems
Working knowledge of GD&T (ASME Y14.5) and the ability to interpret complex engineering drawings
Experience inspecting tight-tolerance metallic components such as machined, welded, or sheet metal assemblies
Proven ability to document, communicate, and resolve quality issues effectively in collaboration with engineering teams
Must be willing to be hands-on on the manufacturing floor daily
Ability to lift up to 25 lbs and work around industrial equipment as needed
Flexible schedule may be required to support production priorities and critical milestones

Job Responsibility

Perform dimensional and visual inspections on complex mechanical and welded components using precision measurement tools and equipment (e.g., calipers, micrometers, height gauges, CMM, FARO arm)
Verify parts and assemblies against engineering drawings, models, and specifications using GD&T principles
Conduct in-process, first-article, and final inspections, ensuring all product meets design and process requirements prior to release
Review and interpret engineering drawings, work orders, and technical documentation to identify inspection criteria
Create, complete, and maintain inspection reports, non-conformance documentation, and traceability records in accordance with internal quality standards
Collaborate cross-functionally with manufacturing engineers, technicians, and quality engineers to drive root cause analysis and corrective action on non-conformances
Assist in the development of inspection methods, tooling, and quality procedures to improve efficiency and repeatability
Support supplier part verification and incoming inspection for purchased or outsourced components
Maintain and calibrate inspection tools and gages in compliance with calibration schedules and quality system requirements
Contribute to a continuous improvement culture focused on process capability, accuracy, and throughput

What we offer

Unlimited PTO policy
Paid parental leave
Potential for year-end bonuses
100% employer-paid health care
401k & Retirement Plans
Weekly Paid Office Lunches
End of Year Bonuses
Fully stocked breakrooms
Stock Options

Fulltime

Aircraft Mechanic III, MQ-9

The USMC MQ-9 CLS Mechanic is a highly qualified and skilled aircraft/composite ...

Location

United States , Cherry Point

Salary:

36.41 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

Must have at least an active Secret US Government clearance
Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum
Minimum of five years of actual Aircraft Mechanic maintenance experience required
Minimum of two years’ experience on MQ-9 aircraft, as Aircraft Mechanic
Must have advanced knowledge of basic and complex mechanical maintenance and repair
Must possess advanced knowledge of technical publications related to aircraft mechanical maintenance
Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components
Thorough knowledge of aircraft sheet metal/structural modification and repair
Ability to determine functionality of non-complex electrical systems
Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls

Job Responsibility

Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.
Diagnose malfunctions, isolate causes, and correct breaks
Test engine operations, use test equipment to locate source of malfunction(s)
Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices
Disassemble and inspect parts for wear, warping, or other defects
Repair/replace defective engine components and reassemble and install engines in aircraft
Adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories
Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks
May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies
Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance
Additional health and welfare payment for each hour worked (SCA provision)

Fulltime

Inspector – Architectural

We are looking for an Inspector – Architectural for one of our clients.

Location

United Arab Emirates , Dubai

Salary:

Not provided

Lobellia

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Architecture / Engineering
4–5 years as Inspector on large complex projects, including field administration experience
Knowledge of UAE codes and authority requirements (Dubai Municipality, Civil Defense, GCAA)
Knowledge of IATA ADRM and ICAO Annexes for airport projects
Familiarity with QA/QC standards and site safety frameworks
Software Skills: AutoCAD, Revit (BIM), Navisworks, MS Office (Word, Excel, PowerPoint), Digital QA/QC platforms and AI-based inspection/reporting apps
Strong communication in English
Teamwork and proactive problem-solving

Job Responsibility

Conduct site and laboratory inspections for architectural works
Assess workmanship and material quality, ensuring compliance with approved documents
Raise Non-Conformity Reports (NCRs) for Engineer/RE approval when required
Stop any non-compliant or unsafe work, referring issues to the relevant engineer
Verify contractor’s use of approved shop drawings and materials
Ensure Artelia site staff apply the correct documents and procedures
Prepare and update hold points, inspection reviews, and QA/QC documentation
Maintain accurate daily site records and progress reports
Monitor site safety measures, ensuring compliance with HSE plans
Continuously track progress, raising alerts on risks or delays

Senior Construction Manager I, MILCON

ICON is seeking a Construction Manager for Military Construction (MILCON) Projec...

Location

United States , Austin

Salary:

Not provided

ICON

Expiration Date

Until further notice

Requirements

7+ years of field construction management experience on large-scale DoD, USACE, NAVFAC, or MILCON projects
Bachelor’s degree in Construction Management, Engineering, Architecture, or related discipline
Strong knowledge of: Unified Facilities Criteria (UFC) and Unified Facilities Guide Specifications (UFGS)
Federal Acquisition Regulation (FAR) and DFARS
USACE/NAVFAC Quality Control procedures
EM 385-1-1 Safety and Health Requirements Manual
Anti-Terrorism/Force Protection (AT/FP) standards
Demonstrated success in delivering projects on secure military installations
Proficiency in construction management software (Procore, Primavera P6, etc.)
Excellent communication and leadership skills with the ability to interact effectively with military stakeholders and government inspectors

Job Responsibility

Direct all field construction activities, ensuring compliance with project plans, technical specifications, and all applicable Unified Facilities Criteria (UFC) and Unified Facilities Guide Specifications (UFGS)
Serve as the on-site representative for ICON, maintaining daily coordination with government inspectors, Contracting Officer Representatives (CORs), and base facility managers
Manage day-to-day construction sequencing, manpower, equipment deployment, material deliveries, and subcontractor performance to maintain schedule and quality
Lead weekly coordination and safety meetings, producing formal field reports, manpower logs, and schedule updates
Maintain and enforce site security protocols, including compliance with Anti-Terrorism/Force Protection (AT/FP) standards and controlled area access requirements
Implement and oversee the Site-Specific Safety and Health Plan (SSHP) per EM 385-1-1 and ensure continuous compliance with DoD and USACE safety requirements
Conduct daily and weekly safety audits, enforce corrective actions, and maintain all associated safety documentation
Support and oversee the Three-Phase Quality Control System (Preparatory, Initial, Follow-Up) in accordance with USACE/NAVFAC QC standards
Ensure that field documentation, inspections, and testing reports are accurate, complete, and properly logged in compliance with federal requirements
Support the Project Manager in verifying that all construction operations adhere to the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses applicable to MILCON projects

New

Accounts Receivable Specialist

We are looking for a skilled Accounts Receivable Specialist to join our team on ...

Location

United States , South Gate

Salary:

Not provided

Robert Half

Expiration Date

Until further notice

Requirements

High School Diploma or equivalent (G.E.D.) required
At least 5 years of experience in accounts receivable, with a strong understanding of financial operations
Proficiency in Microsoft Office applications, including Excel, Word, PowerPoint, and Outlook
Exceptional organizational and time management skills to handle multiple tasks effectively
Strong verbal and written communication skills to interact with internal teams and external customers
Ability to investigate and resolve complex issues with accuracy and efficiency
Experience with an Enterprise Resource Planning (ERP) system is required
Meticulous attention to detail and a commitment to maintaining data accuracy

Job Responsibility

Oversee large customer accounts, handling collections, cash application, and reconciliation tasks to maintain account accuracy
Address customer inquiries and resolve issues related to accounts receivable, ensuring positive client relationships
Manage lockbox exception handling and resolve complex discrepancies to ensure proper cash application processes
Collaborate with the Collections team to research and resolve payment discrepancies efficiently
Coordinate quarterly and annual blanket purchase orders across multiple customer locations
Conduct credit assessments, including trade and bank reference checks, to support credit approval processes
Supervise Accounts Receivable clerks in the absence of the manager, providing guidance and support
Facilitate month-end and year-end closing activities, ensuring all tasks are completed accurately and on time
Prepare and distribute customer invoices, ensuring timely and precise delivery
Support the annual financial audit by collecting and submitting payment records as required

What we offer

medical, vision, dental, and life and disability insurance
eligible to enroll in our company 401(k) plan

Defense - Quality Inspector

Boeing

Location:
United States , Wichita

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
February 13, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Defense - Quality Inspector

Defense - Quality Inspector

Mechanical Quality Inspector II

Temporary Quality Inspector Technician 3

Quality Inspector

Aircraft Mechanic III, MQ-9

Inspector – Architectural

Senior Construction Manager I, MILCON

Accounts Receivable Specialist

Defense - Quality Inspector

Boeing

Location:United States , Wichita

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:February 13, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Defense - Quality Inspector

Defense - Quality Inspector

Mechanical Quality Inspector II

Temporary Quality Inspector Technician 3

Quality Inspector

Aircraft Mechanic III, MQ-9

Inspector – Architectural

Senior Construction Manager I, MILCON

Accounts Receivable Specialist

Location:
United States , Wichita

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
February 13, 2026