CrawlJobs Logo
Hewlett Packard Enterprise Logo Hewlett Packard Enterprise · IT - Software Development

Dc-dc Power Engineer

Taiwan, Taipei · Job Posted March 21, 2026
Apply Position
Job Link Share

Job Description

Designs, analyzes, develops, modifies and evaluates electrical/electronic parts, components, sub-systems, algorithms, or integrated circuitry for electrical/electronic equipment and other hardware systems. Conducts feasibility studies, design margin and validation analyses and empirical testing on new and modified designs. Assists in architecture development and assessment. Evaluates reliability of materials, properties, designs, and techniques used in production. May direct support personnel in the preparation of detailed design, design testing and prototype fabrication.

Job Responsibility

  • Lead project in dc-dc system board power design, testing, technical issue management with other electrical hardware for both internal and outsourced development partners that are responsible for all stages of electrical hardware design and development for complex products, solutions, and platforms, including design, bench validation, tooling and testing
  • Reviews and evaluates designs and project activities for compliance with technology and development guidelines and standards
  • provides tangible feedback to improve product quality
  • Main focus being single-phase, multi-phase DC-DC converters, hot-swap circuity protection, monitoring, and reporting circuits. Work with solution suppliers to identify, implement, test and sustain power solutions
  • Review and respond to supplier's specification deviation requests. Specify, identify, test and qualify alternate components. Work closely with system HW design and test teams in implementing and validating successful power solutions
  • Analyze failures, provide solutions, and work with ODMs, Suppliers and System teams for implementing power solutions
  • Testing and qualifying power components as power semiconductors, and other passive components
  • Provide mentoring and guidance to peers and juniors. Acts as subject matter expert in providing direction and guidance to process improvements and policy matters

Requirements

  • Bachelor's or Master's degree in Electrical Engineering
  • Typically > 6 years experience
  • Using electrical design tools and software packages. Intel VRTT tool, AMD SDLE tool, and other software tool as Cadence Allegro, Python, or SIMPLIS simulation are preferred
  • Knowledge of analog and digital controllers and circuits Knowledge of semiconductor devices and processes, Magnetics, Passive components
  • Ability to effectively communicate product architectures, design proposals and negotiate options at the engineering levels

What we offer

  • Health & Wellbeing
  • Personal & Professional Development
  • Unconditional Inclusion
Hewlett Packard Enterprise - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Dc-dc Power Engineer

8 matching positions

Senior Power Engineer Analogue Design

An exciting opportunity to make a difference within the industry delivering high...
Location
Location
United Kingdom , Guildford
Salary
Salary:
Not provided
sstl.co.uk Logo
Surrey Satellite Technology Limited
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • At least 5 years Analogue/Power Electronics Design experience, ideally in the Space or Aerospace Industries
  • BTEC / Degree in Electronics or equivalent
  • Excellent understanding of analogue and power electronics
  • Familiarity with microprocessor and FPGA interfacing
  • Wide knowledge of electronic components, preferably for a space environment
  • Wide experience with schematic capture and simulation software (i.e. Mentor Graphics, OrCAD PSPICE, etc.)
  • Flexible and adaptable to changing priorities
  • Ability to work simultaneously on a variety of projects
  • Results orientated, can-do approach
  • Pro-active and able to take initiative
Job Responsibility
Job Responsibility
  • Undertaking the design, analysis, development, verification and delivery of power system and energy conversion solutions into different missions, including power subsystem lead responsibility for those missions
  • Requirements capture and derivation from top level requirements to module level requirements
  • Design and delivery of Analogue/Power Electronics Modules in Spacecraft, which meet these requirements within the agreed schedule/cost
  • Management and verification of these requirements
  • Carrying out the required analysis to verify that these requirements will be met over the mission life-time including FMECA, WCA, PSA, Reliability Analysis, etc
  • Specifying and carrying out the verification tests on hardware
  • Authoring of technical documents (including test/verification plans, procedures and technical descriptions)
What we offer
What we offer
  • 32 days Holiday plus Bank Holidays
  • Pension Scheme with Life Assurance
  • Private Medical & International Travel Insurance
  • Annual Bonus Scheme
  • Share Incentive Plan
  • Enhanced Maternity, Paternity & Shared Parental Pay for new parents
  • High Street Discount Scheme and many more
  • Fulltime
Read More
Arrow Right

Propulsion Controls Engineer - Power Electronics

Archer is seeking a talented Propulsion Control Engineer to join our mission of ...
Location
Location
United States , San Jose
Salary
Salary:
144000.00 - 198000.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering, Aerospace Engineering, Computer Engineering, or a related field (Master’s preferred)
  • 3+ years of experience in control systems engineering, ideally in electric propulsion or power electronics
  • Proficiency in writing and debugging embedded C code for real-time applications
  • Strong knowledge of resonant converter control design and its application in high-efficiency power systems
  • Expertise in power electronics, particularly DC-DC converter design and implementation
  • Experience with validation techniques, including simulation tools (e.g., MATLAB/Simulink) and HIL testing
  • Familiarity with microcontrollers and communication protocols (e.g., I2C, SPI, CAN)
  • Detail-oriented with strong analytical and problem-solving skills
  • Ability to thrive in a collaborative, fast-paced, and innovative team environment
Job Responsibility
Job Responsibility
  • Design and implement control algorithms for electric propulsion systems using embedded C code
  • Develop and optimize resonant converter control designs to maximize power efficiency and system reliability
  • Integrate and validate power electronics components, with a focus on DC-DC converters, within propulsion systems
  • Conduct simulations, hardware-in-the-loop (HIL) testing, and system validation to meet stringent aerospace performance standards
  • Work closely with electrical, mechanical, and software teams to troubleshoot and enhance propulsion control performance
  • Document technical designs, test results, and software iterations while adhering to aerospace development processes
  • Support the integration and testing of propulsion systems during prototype development and flight test phases
  • Contribute to the continuous improvement of control strategies aligned with Archer’s mission of sustainable aviation
  • Fulltime
Read More
Arrow Right

Power Systems Engineer

An exciting opportunity to make a difference within the industry delivering high...
Location
Location
United Kingdom , Guildford
Salary
Salary:
Not provided
sstl.co.uk Logo
Surrey Satellite Technology Limited
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • At least 1 year proven Power System Engineering experience in a systems / power electronics role, ideally in the Space or Aerospace Industries though equivalent experience with complex electronic systems will be considered
  • In-depth understanding of analogue and power electronics testing and fault-finding
  • Familiarity with typical Power System Equipment in a spacecraft including Battery Charge/Discharge Regulators, Power Distribution Modules, Relay/Activation Modules, Drive Electronics for motors/mechanism, DC-DC converters (range from 5W-3kW), Heater Control Boards, Batteries and Solar Panels
  • Hands-on experience in fault-finding during development of power electronics/analogue products
  • Good presentation and discussion skills of technical material to/with a technical audience
  • Recent experience with schematic capture and simulation software (e.g. MentorGraphics, OrCAD PSPICE, etc.)
  • Recent experience with scripting languages such as Python, ideally in a hardware/ATE control environment
  • Recent experience with the use of standard test equipment including oscilloscopes, power supplies, load units and meters
  • BTEC / Degree in Electronics or equivalent
  • Very good understanding of analogue and power electronics
Job Responsibility
Job Responsibility
  • Managing and updating module documentation including procedures, reports, interface documents and drawings
  • Ensuring that module test equipment is operating normally
  • Fault-finding on flight modules as necessary
  • Overseeing of the testing of flight modules
  • Preparing reviews of all test documentation
  • Reviewing module build documentation
  • Configuration and updating of ATE to suit the requirements of current modules
  • Delivery of tested flight modules to the spacecraft Assembly, Integration and Test team on time
  • In conjunction with Senior Engineers carrying out qualification testing on new and revised module designs
  • Support to product development and new designs for future missions
What we offer
What we offer
  • 32 days Holiday plus Bank Holidays
  • Pension Scheme with Life Assurance
  • Private Medical & International Travel Insurance
  • Annual Bonus Scheme
  • Share Incentive Plan
  • Enhanced Maternity, Paternity & Shared Parental Pay for new parents
  • High Street Discount Scheme
  • Fulltime
Read More
Arrow Right

Senior Power Systems Engineer

An exciting opportunity to make a difference within the industry delivering high...
Location
Location
United Kingdom , Guildford
Salary
Salary:
Not provided
sstl.co.uk Logo
Surrey Satellite Technology Limited
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BTEC / Degree in Electronics or equivalent
  • At least 3 years proven Power System Engineering experience in a systems / power electronics role, ideally in the Space or Aerospace Industries
  • In-depth understanding of analogue and power electronics analysis, design, build, and test in a system/subsystem design
  • Familiarity with typical Power System Equipment in a spacecraft including: Battery Charge/Discharge Regulators, Power Distribution Modules, Relay/Activation Modules, Drive Electronics for motors/mechanism, DC-DC converters (range from 5W-3kW), Heater Control Boards, Batteries and Solar Panels
  • Hands-on design and manufacturing experience and fault-finding during development of power electronics/analogue products
  • Good presentation and discussion skills of technical material to/with a technical audience
  • Recent experience with schematic capture and simulation software (e.g. MentorGraphics, OrCAD PSPICE, etc.)
  • Excellent inter-personal and communication skills, ability to influence, persuade and negotiate with people at all levels (externally & internally) as well as to assist in reaching compromises when there are conflicting requirements
  • High degree of organisation, self-motivation and initiative
  • Good team working skills, together with the ability to interface with others at all levels
Job Responsibility
Job Responsibility
  • Act as Power Subsystem Lead and Work Package Manager in Space Projects
  • Ownership of the power subsystem and all aspects feeding into and out of it
  • Identification and flow-down of spacecraft system requirements to the spacecraft power system
  • Delivery of a power system solution that meets these requirements in line with defined company processes
  • Management and verification of these requirements
  • System / subsystem level interfacing and trade-offs
  • Management of technical solutions, supporting other design engineers where required
  • Management and delivery of satellite power systems work packages including budget, schedule, planning, risk management and interactions with project managers
  • Interface with internal and external customers
  • Authoring of technical documents (including interface level FMEA, development/test/verification plans, test procedures and technical descriptions)
What we offer
What we offer
  • 32 days Holiday plus Bank Holidays
  • Pension Scheme with Life Assurance
  • Private Medical & International Travel Insurance
  • Annual Bonus Scheme
  • Share Incentive Plan
  • Enhanced Maternity, Paternity & Shared Parental Pay for new parents
  • High Street Discount Scheme
  • Relocation assistance
  • Fulltime
Read More
Arrow Right

Sr. Power Hardware Engineer

Microsoft Silicon, Cloud Hardware, and Infrastructure Engineering (SCHIE) is the...
Location
Location
Taiwan , Taipei
Salary
Salary:
Not provided
https://www.microsoft.com/ Logo
Microsoft Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s Degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or related field AND 5+ years technical engineering experience
  • OR Master’s Degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or related field AND 3+ years technical engineering experience
  • OR equivalent experience
  • 3 - 5 years of working experience in datacenter and xPU power delivery design
  • Experience designing and optimizing high‑efficiency DC‑DC power converters for server or data‑center applications
  • Proven track record of designing multi-phase buck/buck-boost regulators, digital PWM controllers, bus converters, LDOs, PMICs, charge pumps, ADCs & DACs, etc.
  • Experience with Data Center 48V power conversion systems
  • Good knowledge of control theory, closed loop compensation, stability analysis, phase margin, etc.
  • Strong knowledge of high frequency magnetics design for power electronics
  • Experience designing printed circuit boards using schematic captures and layout tools such as Cadence
Job Responsibility
Job Responsibility
  • Support the architect and design of state-of-the-art xPU power conversion/delivery systems serving a broad range of applications such as AI/machine learning, Data Center general purpose computing, and storage
  • Participate in Power delivery solution space analysis to drive team insights and architecture forward into most optimal end to end power system implementation
  • Collaborate with suppliers, industry partners, project managers managers, and cross-functional engineering teams to define power system requirements, specifications, and solutions
  • Perform simulations, modeling, and validation of power conversion/delivery systems using tools such as SIMPLIS and SPICE
  • Support project execution from concept through production, including technical documentation and troubleshooting
  • Support creation of product specifications
  • Support testing/test planning of all solutions in all stages of development
  • Fulltime
Read More
Arrow Right

Staff Power Electronics Engineer- Inverter

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , San Jose
Salary
Salary:
162000.00 - 222000.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Electrical Engineering Degree or equivalent experience
  • 8+ years of relevant electrical system and circuit board design experience
  • Sound knowledge and hands-on experience in traditional and modern power electronic technologies including (not limited to): Inverter technology for variable speed motor drive (MOSFET, rectifiers and gate driver PWM technologies)
  • Passive power devices, e.g. inductors, capacitors, resistors and transformers
  • Power electronics system architecture design and hardware integration
  • Motor drive and power converters (AC-DC, DC-DC, DC-AC) control technologies
  • Motor control and commutation methods for various types of three phase motors
  • Microcontrollers and processors
  • Sensor technology and implementation
  • Gate drive design for wide bandgap devices (SiC and GaN)
Job Responsibility
Job Responsibility
  • Design and develop fault tolerant and high power density motor controller including drivers, sensors, power stages, and embedded control interfaces
  • Be responsible for all aspects of power electronics designs from components, circuits, modules and system integration
  • Passive component design and optimization in power electronics systems
  • EMC and Lightning design, analysis, and testing for low voltage and high voltage electronic systems
  • Lead new designs from conception into production while working with a multidisciplinary team
  • Start to finish ownership of hardware – from specification to design, prototype, reliability validation and manufacturing
  • Requirements capture, topology trade-study and performance modeling
  • Schematic, layout and PCB assembly design and review
  • Design and carry out prototype verification tests for proof of concept
  • Analyze test data and reports to verify functional and performance specifications
  • Fulltime
Read More
Arrow Right

Wireless Power Electronics Engineer

At NewOrbit Space, our mission is to engineer the lowest orbiting satellites on ...
Location
Location
United Kingdom , Reading
Salary
Salary:
Not provided
neworbit.space Logo
NewOrbit Space
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Advanced degree in Electrical Engineering, Power Electronics, or a related field
  • At least 3 years of experience in power electronics design (including academic research, e.g., PhD)
  • Strong fundamental knowledge of analogue and digital circuits
  • Proficiency in tools such as CST/Maxwell/COMSOL, LTSpice, TINA-TI, MATLAB/Simulink
  • Experience with multiple converter topologies (DC/DC, class E and class D inverters)
  • EMI/EMC compliance, control theory, and closed-loop feedback systems
  • Control architectures, algorithms, and power control for converters and drives
  • Reliability analysis, including stress analysis and FMECA (Failure Modes, Effects, and Criticality Analysis)
Job Responsibility
Job Responsibility
  • Design and prototype advanced power electronics circuits and PCB layouts
  • Develop DC-DC and DC-AC converters, power conditioners, and other power supplies for inductively coupled plasma sources
  • Conduct modelling, control design, and stability analysis for power electronic converters
  • Test and validate power converters against simulations, considering EMI/EMC, reliability, and efficiency
  • Collaborate with a multidisciplinary team to integrate power electronics into various satellite subsystems
What we offer
What we offer
  • Equity and Competitive Salary
  • Comprehensive Benefits Package – Including private health insurance with dental and optical coverage, annual healthcare check-ups etc
  • Hybrid Work - A hybrid setup with one dedicated remote day per week
  • Relocation package and visa sponsorship if joining from abroad
  • Fulltime
Read More
Arrow Right

Staff Power Electronics Engineer

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , San Jose
Salary
Salary:
163200.00 - 200000.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS Degree in Electrical Engineering with 10+ years or MS with 8+ years of experience in related fields
  • Sound knowledge and hands-on experience in traditional and modern power electronic technologies
  • Low power and high power DC-DC topologies, gate driver, modulation techniques and control theories
  • Inverter technology for variable speed motor drive, including topologies and PWM techniques
  • Familiarity with both wide-band-gap and silicon power semiconductor devices
  • Passive power devices, e.g. inductors, capacitors, resistors and transformers
  • Experience in design, build, manufacturing and testing of custom magnetics (high -frequency transformers, inductors)
  • Power electronics system architecture design and hardware integration
  • Power converters and motor drive (AC-DC, DC-DC, DC-AC) control technologies
  • Microcontrollers and multiple serial protocols (UART, CAN, SPI, I2C, etc.)
Job Responsibility
Job Responsibility
  • Design and build high voltage, high power density power electronics converter products for eVTOL applications
  • Develop and analyze electrical architectures and power converter (DC-DC) topologies, and ensure system functions, performance, safety and reliability requirements are achieved
  • Responsible for all aspects of power electronics designs required in an all-electric aircraft, from components to circuits, modules and system integration
  • Leads new designs from conception into production while working with a multidisciplinary team
  • Start to finish ownership of hardware – from specification to design, component selection, modeling, prototype, product build, verification testing, safety and reliability validation and manufacturing
  • Design electronic power supply and sensing circuits
  • Schematic, layout and PCB assembly design and review
  • Design and carry out prototype verification tests for proof of concept
  • Analyze test data and reports to determine if the design meets functional and performance specifications
  • Troubleshoot and help root cause any issues that occur in the prototype line
  • Fulltime
Read More
Arrow Right