Cryogenic Technician Job at Amentum (Agana)

Manufacturing Technician - Cyclotron Operator

The Manufacturing Technician – Cyclotron Operator is responsible for the safe an...

Location

United States , Maryland Heights

Salary:

24.00 - 25.00 USD / Hour

Beacon Hill

Expiration Date

Until further notice

Requirements

Associate degree in Electronics, Physics, Engineering, Nuclear Medicine Technology, or related field preferred
Three or more years of relevant work experience required
Equivalent technical training and experience will be considered
Training in radiological safety and cyclotron operations preferred
Ability to use a variety of general-purpose test equipment and bench test electronic system components
Good mechanical inclination and proficiencies
Good technical troubleshooting skills with and without schematics
Experience in maintaining, troubleshooting, and repairing the following: solid state and vacuum tube based electronics, analog and digital circuits, logic circuits/PLCs, high power RF systems (high HF through low VHF ranges), high voltage DC power equipment, electro-mechanical systems, and vacuum systems (mechanical, cryogenic, and/or diffusion pumps) preferred
Experience working around ionizing radiation sources preferred
Experience working with pneumatics and hydraulics is preferred

Job Responsibility

Must maintain operational compliance with US and international regulatory agencies and guidelines (i.e. FDA, EU, HC, TGA, PIC/S, ISO, USP, NRC, cGMP, etc.)
Ensure a safe and quality working environment
Operate the cyclotron according to established protocols
Monitor, adjust, and control beam parameters to optimize isotope yields and quality
Perform routine start-up, shutdown, and preventative maintenance tasks
Troubleshoot system failures and coordinate complex repairs with Cyclotron Specialist
Keep detailed logs of maintenance and operational activities
Follow radiation safety procedures and use protective equipment
Complete and maintain all required safety and operational documentation
Record production data, radiation levels, and equipment performance metrics

Principal Technical Program Manager (Quantum Manufacturing)

Microsoft Quantum is building the world’s first scalable, fault-tolerant quantum...

Location

Denmark , Kongens Lyngby

Salary:

912400.00 - 1559800.00 DKK / Year

Microsoft Corporation

Expiration Date

Until further notice

Requirements

Bachelors or above in Engineering, Operations management or related discipline
Significant experience in manufacturing, production operations, hardware development, supply chain, or related technical environments
Demonstrated experience leading complex cross-functional programs involving multiple engineering and operational stakeholders
Communication and stakeholder management skills — with a proven ability to drive alignment across multiple teams without direct authority
Comfortable operating in ambiguous, fast-evolving environments where you'll need to build systems and processes alongside the people using them
Significant experience in semiconductor manufacturing, fabrication operations, hardware production, or other complex technical manufacturing environments, ideally including R&D, pilot-line, or pre-production settings where processes are still maturing
Track record of managing end-to-end production flow across multiple process areas (e.g., fabrication, packaging, test)
Experience in small-scale or pilot-line environments transitioning toward low-volume manufacturing — including navigating the tension between development and production priorities
Analytical skills with experience using production data to drive decisions (yield analysis, cycle time tracking, statistical process control (SPC))
Experience defining and implementing stage-gate or manufacturing readiness review frameworks

Job Responsibility

Own the full lot lifecycle from wafer-in to data-out: coordinate across fabrication, packaging, and cryogenic loading for measurement to ensure seamless handoffs and unbroken visibility at every stage
Own the master production schedule and drive daily execution with a relentless focus on throughput and quality — managing expedites, resolving blockers, and keeping stakeholders informed on status, risks, and recovery plans
Drive alignment on fab capacity allocation across competing priorities: balance resources across production delivery, process development, and technology R&D — ensuring plans are grounded in the program roadmap and scaling priorities
Plan and schedule maintenance windows to minimize production impact
Own production-level KPIs and dashboards — throughput, cycle time, equipment uptime, and schedule adherence — ensuring they are accurate, accessible, and actionable
Partner with quality/yield engineering and process integration teams to sharpen focus on the KPIs that truly matter — challenging assumptions, connecting data to outcomes, and ensuring yield improvements translate into real production impact
Partner with process engineering and integration teams to coordinate tech transfers, split-lot management, and wafer disposition — ensuring each transfer follows a clear stage-gate framework with a defined threshold for 'production-ready'

What we offer

Find additional benefits and pay information here: https://careers.microsoft.com/v2/global/en/corporate-pay/denmark-corporate-pay.html

Fulltime

Cryo Technician

Location

United Kingdom , Reading

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

Satisfactory completion of formal training for mechanical maintenance of cryogenics equipment
1 to 3 years’ experience in the field of cryogenics, ground support equipment maintenance or equivalent
Must have a level 3 understanding of written and spoken English and ability to comprehend all required publications
Must possess a valid driver’s license and be able to qualify and operate vehicles related to this position and the Material handing equipment (pallet jacks, 4K/10K forklifts)
Must be able to obtain and maintain a Public Trust U.S. Government Clearance
U.S. Citizenship is required to obtain a Public Trust Clearance
Complete Cryotainer Maintenance Course (J3AZR2F051 05AA) and awarded SEI 036
Ensures qualified personnel (AFSC 2F0X1), US Civil Service, US contract employees, host national military and/or civilian, or sister service equivalent(s) are permitted to perform cryogenic operations
Proficient with Microsoft Office (Excel, Word, PowerPoint) for documenting maintenance records and work orders
Capable of lifting, pushing, or pulling at least 50 lbs and operating material handling equipment

Job Responsibility

Complies with all company standard operating procedures, work instructions, USAF Technical Orders, industrial safety and environmental policies
Perform periodic maintenance, reconstitution, and storage of cryogenic assets (like LOX and LIN tanks) in accordance with USAF Technical Orders
Inspects/evaluates cryogenic assets and installed components
Identifies necessary replacement parts and part numbers
Identify malfunctions and perform repairs on cryotainers, transfer tubes, and valves to ensure equipment remains mission-ready
Cleans/inspects and repairs cryogenic assets and components
Troubleshoots cryogenic asset malfunctions and takes necessary maintenance actions
Participates in equipment maintenance, shop safety, and other related training
Ensures calibration of cryogenic gauges and hydrostatic testing of liquid samplers
Ensures corrosion control is performed as required, to include sanding defected areas, cleaning and priming surfaces, painting and application of preservation materials

Fulltime

Cryo Technician

Conducts periodic maintenance operations, reconstitution, storage and deployment...

Location

United Kingdom , Reading

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

Satisfactory completion of formal training for mechanical maintenance of cryogenics equipment
1 to 3 years experience in the field of cryogenics, ground support equipment maintenance or equivalent
Must have a level 3 understanding of written and spoken English and ability to comprehend all required publications
Must possess a valid driver's license and be able to qualify and operate vehicles related to this position and the Material handing equipment (pallet jacks, 4K/10K forklifts)
Must be able to obtain and maintain a Public Trust U.S. Government Clearance
U.S. Citizenship is required to obtain a Public Trust Clearance
Complete Cryotainer Maintenance Course (J3AZR2F051 05AA) and awarded SEI 036
Ensures qualified personnel (AFSC 2F0X1), US Civil Service, US contract employees, host national military and/or civilian, or sister service equivalent(s) are permitted to perform cryogenic operations
Proficient with Microsoft Office (Excel, Word, PowerPoint) for documenting maintenance records and work orders
Capable of lifting, pushing, or pulling at least 50 lbs and operating material handling equipment

Job Responsibility

Complies with all company standard operating procedures, work instructions, USAF Technical Orders, industrial safety and environmental policies
Perform periodic maintenance, reconstitution, and storage of cryogenic assets (like LOX and LIN tanks) in accordance with USAF Technical Orders
Inspects/evaluates cryogenic assets and installed components
Identifies necessary replacement parts and part numbers
Identify malfunctions and perform repairs on cryotainers, transfer tubes, and valves to ensure equipment remains mission-ready
Cleans/inspects and repairs cryogenic assets and components
Troubleshoots cryogenic asset malfunctions and takes necessary maintenance actions
Participates in equipment maintenance, shop safety, and other related training
Ensures calibration of cryogenic gauges and hydrostatic testing of liquid samplers
Ensures corrosion control is performed as required, to include sanding defected areas, cleaning and priming surfaces, painting and application of preservation materials

Fulltime

Staff Mechanical Engineer, Vacuum Systems

The Staff Mechanical Engineer, Vacuum Systems will work closely with Realta’s en...

Location

United States of America , Madison

Salary:

Not provided

Realta Fusion Inc.

Expiration Date

Until further notice

Requirements

BS in Mechanical Engineering, Materials Science, Aerospace Engineering, or a related field, plus 8+ years’ work experience
Extensive experience and expertise in 3D CAD design with current CAD software tools (SolidWorks, NX, Creo, etc.) and familiar with PDM
Demonstrated understanding of pressure vessel design, structural analysis, heat transfer, and thermal analysis, and the ability to leverage FEA tools such as ANSYS or COMSOL to solve engineering problems
Deep expertise of vacuum pump technologies (ion, turbomolecular, scroll, diffusion, cryogenically cooled panels, getters, etc…) and sealing and bakeout techniques for large vacuum chambers
Highly proficient in vacuum conductance and pump down modelling and optimization using tools such as MolFlow, VacTran, hand calculations, or other
Substantial technical experience with advanced knowledge and judgement in most of the following areas: Design, commissioning, and operation of ultra-high vacuum systems and parts compatible with vacuum environments
Welding, machining, and mechanical assembly processes and techniques
Project management abilities defined as the ability to control scope, cost, and schedule
Metrology, inspection, quality control, and test methods related to manufacturing using CMMs, laser trackers, FARO arms, or other test equipment
Demonstrated ability to supervise and safely direct activities of small teams of technical personnel

Job Responsibility

Collaborate with both physicists and scientists, as well as engineers and technical support staff, to develop technologies for novel vacuum systems requiring innovative designs and critical high-level analysis
Design and model complex ultra-high vacuum (UHV) pumping technologies, diagnostics, in-situ high temperature bakeout, sealing strategies, and vacuum vessels
Establish UHV best practices, design vacuum cleaning and handling laboratories, and mentor staff in UHV principles, contamination control, and leak detection
Design, build, and operate UHV test stands to validate both established and emerging vacuum technologies against stringent performance requirements
Research, select, and occasionally test UHV-compatible materials (e.g., low-outgassing metals, specific elastomers/metals for seals), specify cleaning protocols, and define bakeout and pump down sequences
Lead efforts involving general mechanical-system design, mechanical stress analysis, thermal analysis, and fatigue analysis
Interface with facilities and assist in the specification, design, and construction of a greenfield cryoplant and associated gas delivery systems
Conduct formal design reviews, generate technical documentation, and respond to questions concerning engineering design and operation
Work with vendors and internal resources to fabricate, assemble, test, and validate components and systems
Communication: Synthesize and present technical work internally and externally, communicate daily with project teams and leadership to support programmatic needs

What we offer

Competitive compensation package, including equity stock options
Comprehensive benefits including health, dental, and vision insurance, plus a retirement savings plan
Flexible paid time off (PTO) to support work-life balance
Work and live in Madison, Wisconsin — one of America’s most livable and vibrant cities

Fulltime

Senior Mechanical Engineer

Lead the design and development of groundbreaking fusion technologies that will ...

Location

United States , Madison

Salary:

Not provided

Realta Fusion Inc.

Expiration Date

Until further notice

Requirements

BS in Mechanical Engineering, Nuclear Engineering, or a related field, plus 5-8 years' work experience
Extensive experience and expertise in 3D CAD design with current CAD software tools (SolidWorks, NX, Creo, etc.) and familiar with PDM
Demonstrated understanding of mechanism design, structural analysis, heat transfer, and thermal analysis, and the ability to leverage FEA tools such as ANSYS or COMSOL to solve engineering problems
Technical experience with the installation and commissioning of precision scientific, mechanical, cryogenic, hydraulic, plumbing, and/or vacuum systems
Substantial technical experience with advanced knowledge and judgement in most of the following areas: Design, commissioning, and operation of ultra-high vacuum systems and parts compatible with vacuum environments
Welding, machining, and mechanical assembly processes and techniques
Project management abilities defined as the ability to control scope, cost, and schedule
Metrology, inspection, quality control, and test methods related to manufacturing using CMMs, laser trackers, FARO arms, or other test equipment
Demonstrated ability to supervise and safely direct activities of small teams of technical personnel
Ability to interact and communicate efficiently with researchers, engineers, designers, machinists, and technicians to provide a high level of customer service

Job Responsibility

Develop 3D models and technical drawings for complex beamline and fusion device elements to be operated in ultra-high vacuum environments
Manage the full engineering lifecycle from conception, construction, and field installation to operational deployment and beyond
Translate concepts into detailed engineering drawings, carry out design analysis, identify potential problems, and independent or collaboratively develop solutions
Lead efforts involving general mechanical-system design, mechanical stress analysis, thermal analysis, and fatigue analysis
Conduct formal design reviews, generate technical documentation, and respond to questions concerning engineering design and operation
Work with vendors and internal resources to fabricate, assemble, test, and validate components and systems
Supply hands-on support in fabrication and assembly of prototype and laboratory systems, up to and including operating machine shop equipment
Communication: Synthesize and present technical work internally and externally, communicate daily with project teams and leadership to support programmatic needs
Safety: Contribute to the establishment of company safety standards and lead implementation of these standards within R&D and Engineering team
Culture and Values: Foster a positive and inclusive work environment that aligns with the company's mission, values, and sustainability goals, promoting innovation, collaboration, and employee engagement

What we offer

Competitive compensation package, including equity stock options
Comprehensive benefits including health, dental, and vision insurance, plus a retirement savings plan
Flexible paid time off (PTO) to support work-life balance
Work and live in Madison, Wisconsin — one of America's most livable and vibrant cities

Fulltime

Equipment Technician

The Equipment Technician – Plasma Processes supports daily operations and mainte...

Location

United States , Tempe

Salary:

Not provided

Quantum Computing Inc.

Expiration Date

Until further notice

Requirements

Associate's degree or technical diploma in Electronics, Mechatronics, Automation, or related field
or equivalent military/industry training
3+ years of hands-on maintenance experience in semiconductor, photonics, or precision manufacturing environments
Strong troubleshooting skills across electrical, pneumatic, mechanical, and robotic subsystems
Experience maintaining or operating any semi-conductor manufacturing equipment
Working knowledge of high vacuum (turbomolecular, cryo, roughing), gas delivery, and motion control
Familiarity with cleanroom safety, and hazardous gas handling
Ability to read and interpret electrical schematics, mechanical drawings, and maintenance manuals
Proficiency in using diagnostic tools such as multimeters, oscilloscopes, leak detectors, and endpoint monitors
Basic computer literacy with maintenance tracking or SPC software for logging and reporting

Job Responsibility

Perform scheduled preventive maintenance and calibrations on plasma etch and deposition systems (e.g., PECVD, ICP, RIE, IBE)
Diagnose and repair mechanical, electrical, and vacuum system issues, including RF power, robotics, pumps, and gas delivery components
Execute equipment startup, qualification, and recovery procedures with attention to safety and process control
Respond promptly to tool alarms, process deviations, and equipment malfunctions to minimize downtime
Collaborate with equipment and process engineers to support experiments, hardware changes, and continuous improvement projects
Maintain accurate maintenance logs, fault records, and part replacement histories in equipment management systems
Support robot and wafer handling system alignment, calibration, and troubleshooting
Manage spare parts usage, assist with parts ordering, and work with vendors for field service coordination
Follow all EHS and cleanroom protocols, including safe handling of high-voltage, vacuum, cryogenic, and hazardous gas systems
Contribute to documentation development for operating procedures, PM instructions, and troubleshooting guides

Fulltime

Manufacturing Technician – Cyclotron Operator

The Manufacturing Technician – Cyclotron Operator is responsible for the safe an...

Location

United States , St. Louis

Salary:

23.00 - 25.00 USD / Hour

Beacon Hill

Expiration Date

Until further notice

Requirements

Associate degree in Electronics, Physics, Engineering, Nuclear Medicine Technology, or related field preferred
Three or more years of relevant work experience required
Equivalent technical training and experience will be considered
Training in radiological safety and cyclotron operations preferred
Ability to use a variety of general-purpose test equipment and bench test electronic system components
Good mechanical inclination and proficiencies
Good technical troubleshooting skills with and without schematics
Experience in maintaining, troubleshooting, and repairing the following: solid state and vacuum tube based electronics, analog and digital circuits, logic circuits/PLCs, high power RF systems (high HF through low VHF ranges), high voltage DC power equipment, electro-mechanical systems, and vacuum systems (mechanical, cryogenic, and/or diffusion pumps) preferred
Experience working around ionizing radiation sources preferred
Experience working with pneumatics and hydraulics is preferred

Job Responsibility

Must maintain operational compliance with US and international regulatory agencies and guidelines (i.e. FDA, EU, HC, TGA, PIC/S, ISO, USP, NRC, cGMP, etc.)
Ensure a safe and quality working environment
Operate the cyclotron according to established protocols
Monitor, adjust, and control beam parameters to optimize isotope yields and quality
Perform routine start-up, shutdown, and preventative maintenance tasks
Troubleshoot system failures and coordinate complex repairs with Cyclotron Specialist
Keep detailed logs of maintenance and operational activities
Follow radiation safety procedures and use protective equipment
Complete and maintain all required safety and operational documentation
Record production data, radiation levels, and equipment performance metrics

Fulltime

Select Country

Cryogenic Technician

Job Description

Job Responsibility

Requirements

Looking for more opportunities?