Crane Operator / Rigger Job at Amentum

Marina Heavy Crane Operator

A well-established marina and repair facility in Fort Lauderdale, FL is seeking ...

Location

United States , Fort Lauderdale

Salary:

40.00 USD / Hour

Darwin Recruitment GmbH

Expiration Date

Until further notice

Requirements

Experience operating mobile cranes or heavy lifting equipment in a marine, shipyard, construction, or industrial setting
Knowledge of safe rigging, lifting procedures, and load calculations
Ability to read and follow lift plans and operational safety guidelines
Strong communication and teamwork skills when coordinating lifts with ground crews
Ability to work outdoors in varying weather conditions and near water
Ability to lift 50+ lbs and assist with physical yard tasks when required
Valid driver’s license

Job Responsibility

Operate mobile and heavy cranes to lift, position, and move vessels, engines, masts, and heavy marine equipment
Safely perform vessel launches, lifts, and relocations in coordination with marina and yard personnel
Inspect lifting equipment, slings, chains, and rigging before operations to ensure safety compliance
Maintain accurate load calculations and safe lifting procedures based on vessel weight and crane capacity
Work closely with riggers, dockhands, and yard teams during lifting and positioning operations
Perform routine pre-operation equipment inspections and report maintenance needs
Support boatyard operations by assisting with yard logistics, material movement, and heavy equipment handling
Follow all OSHA safety regulations, environmental guidelines, and marina operating procedures
Maintain clear communication with supervisors and crew during lifts to ensure safe and efficient execution
Assist with general marina or yard tasks when crane operations are not required

Fulltime

Crane and Rigging Supervisor

The Crane & Rigging Supervisor will be responsible for overseeing all crane asse...

Location

Canada , Langley; Prince George

Salary:

120000.00 - 140000.00 CAD / Year

Surespan Structures

Expiration Date

Until further notice

Requirements

10+ years of experience working with crawler cranes, rigging, lift planning, or heavy industrial construction
Experience supervising crane assembly/disassembly activities for lattice boom crawlers (100T–300T)
BC Crane Safety registration
Level A or Red Seal Mobile Crane Operator certification preferred
Maintain at a minimum a valid BC Class 5 Driver’s License and clean drivers abstract
A Class 1 Driver's License would be an asset
Strong understanding of WorkSafeBC requirements (Part 14 – Cranes & Hoists, Part 15 – Rigging) and OEM procedures
Proficient in MS Office (Excel emphasis)
comfortable learning new systems and lift‑planning tools
Strong rigging knowledge including sling angle calculations, load charts, ground bearing assessments, and critical lift procedures

Job Responsibility

Supervise all crane assembly and disassembly activities, ensuring compliance with manufacturer procedures, engineered lift plans, and WorkSafeBC regulatory requirements
Organize, delegate, and liaise with operators, rigging crews, supervisory personnel, and project teams to ensure safe and efficient crane setups and takedowns
Ensure risks related to crane configuration, ground bearing capacity, boom assembly, lifting components, and rigging selection are properly anticipated, assessed, and mitigated
Manage the crane maintenance, inspection, and certification program, ensuring all crawler cranes, rigging gear, and below‑the‑hook devices remain in safe working order
Coordinate with internal mechanics and external service providers to ensure timely repairs, annual certifications, NDT inspections, and OEM‑required maintenance
Ensure cranes are physically maintained to a clean and serviceable condition presenting a professional image of the Surespan when being transported or on the job
Review maintenance reports, logbooks, and inspection documentation
ensure timely completion and sign‑off
Coordinate with Operations to ensure proper deployment of cranes, rigging gear, and lifting equipment to project sites
Develop or review lift plans including rigging selection, sling angles, WLL compliance, load paths, and ground preparation requirements

Fulltime

Transportation Heavy Equipment Mechanic Equipment Inspector Tester

Amentum, a global leader in critical mission support, engineering, technology, a...

Location

United States , Jacksonville

Salary:

36.83 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

Five (5) years' experience in Heavy Equipment
Ability to understand and apply instructions written in English
Ability to use tools and equipment common to the carpentry trade
NAVFAC P307 - Cat 3 Non-cab operator and rigger, Mobile Crane Mechanic, General inspector, Crane Electrician, Load Test Director, Category 1 Crane Mechanic
Forklift Operator Certification
Working Platform Certification
Must be able to obtain and maintain facility credentials/authorization
US Citizenship is required for facility credentials/authorization at this work location

Job Responsibility

Performs duties described in the Service Contract Act Service Order Transportation Heavy Equipment Mechanic Equipment Inspector/ Tester
May perform duties of other classifications that have a pay rate equal to or lower than the employee’s current rate
Analyzes malfunctions and repairs, rebuilds and maintains power equipment
Operates and inspects machines or equipment to diagnose defects
Dismantles and reassembles equipment, using hoists and hand tools
Examines parts for damage or excessive wear, using micrometers and gauges
Replaces defective engines and subassemblies
Tests overhauled equipment to insure operating efficiency
Welds broken parts and structural members
May direct workers engaged in cleaning parts and assisting with assembly and disassembly of equipment

Fulltime

Rigger

Join Mammoet and help move the world—one colossal lift at a time. Mammoet is loo...

Location

United States , Cameron, Louisiana

Salary:

Not provided

Mammoet

Expiration Date

Until further notice

Requirements

NCCCO Rigger 2 or NCCER Advanced
Manlift & Forklift Training
Experience assembling/disassembling Super Lift cranes
Certified Signal Person
Strong professional experience in rigging operations
Basic knowledge of hydraulics and mechanics
Excellent communication skills and situational awareness
English proficiency (basic verbal & written)
Prior experience in one or more sectors: civil engineering, construction, renewables, oil & gas, offshore, ports or mining
Safety mindset and willingness to meet Mammoet training standards

Job Responsibility

Prepare and handle auxiliary equipment for lifting, transport and movement of massive project loads
Secure loads and ensure job-site safety at all times
Assemble and disassemble supplemental equipment supporting main operations
Guide crane operators using expert hand signals and radio communication
Uphold the highest safety and quality standards in every task

What we offer

Health, Dental & Vision Benefits
401(k) with 6% employer match
Paid Vacation & Paid Sick Time
Per Diem

Fulltime

Crane Operators (C1/CO)

Mineral Resources is actively seeking experienced Crane Operators to join our te...

Location

Australia , Pilbara

Salary:

Not provided

Mineral Resources

Expiration Date

Until further notice

Requirements

Experience working within the mining, construction and resources industry
HRWL – C1 or CO
Construction White Card
Unlimited Australian working rights
National Police clearance (12 months)
Ability to pass a Pre-employment Medical and a Drug / Alcohol Screen

Job Responsibility

Ensure safety protocols and procedures are strictly adhered to maintaining a safe and efficient work environment
Complete daily site crane inspections prior to start-up and record all findings
Follow hand signals, radio communication, or written instructions to coordinate with riggers and site supervisors
Observe all rigging techniques prior to performing any lift to ensure the lifting is rigged correctly and has the capacity to perform the lift safely
Assess the weight of all loads and ensure they are within crane capacity
Crane operation installing steel structures, heavy mechanical equipment and construction or camp accommodation buildings
Report any unsafe conditions or equipment malfunctions immediately

What we offer

3/1 roster on a permanent contract
Perth point of hire
Varied styles of accommodation on offer
Attractive base rate plus penalties, with additional site allowances, severance and project completion bonuses

Fulltime

Rigger

The Construction Rigger is responsible for preparing, moving, and setting up hea...

Location

United States , Hixson

Salary:

Not provided

Clark Construction Company

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
additional rigging or trade certifications preferred
3+ years of rigging experience in construction, industrial, or heavy equipment settings
Proven knowledge of rigging practices, hand signals, and crane operations
Ability to calculate load weights, center of gravity, and safe lifting angles
Strong understanding of OSHA, NCCCO, and industry safety standards
Excellent teamwork, communication, and problem-solving skills
Ability to work at heights, in confined spaces, and in various weather conditions

Job Responsibility

Inspect and select rigging equipment such as chains, slings, shackles, and hoists to ensure safety and proper function
Set up and dismantle rigging for construction lifts and heavy equipment moves
Signal crane and equipment operators to ensure safe, precise movement of loads
Secure loads using ropes, chains, cables, or slings in accordance with lift plans
Read and interpret load charts, blueprints, and lift plans
Conduct pre-lift safety checks and ensure rigging activities comply with OSHA and company safety standards
Identify and mitigate potential hazards before and during rigging operations
Maintain tools, rigging gear, and equipment in safe working condition
Assist in positioning, aligning, and securing heavy materials and structures
Work closely with supervisors, operators, and other trades to coordinate lifts and ensure smooth operations

Fulltime

Rigger

P+S Personnel are pleased to be working on behalf of our clients, who are curren...

Location

United Kingdom , Leiston

Salary:

Not provided

P+S Care and Support

Expiration Date

December 31, 2026

Requirements

Recognised Rigger qualification (e.g., Level 3 Diploma in Moving Loads, NPORS/NVQ Rigger qualification, or equivalent)
Proven experience in rigging/lifting operations in industrial, engineering, or heavy plant environments
Strong understanding of lifting operations, LOLER, safe working loads, lifting accessories, and lift planning
Valid CCNSG Safety Passport (or equivalent nuclear site safety qualification)
Ability to interpret rigging drawings, lifting plans, and engineering instructions
High attention to detail and commitment to nuclear site safety standards

Job Responsibility

Carry out complex rigging, lifting, slinging, and load-handling activities in accordance with lifting plans and method statements
Select appropriate lifting equipment and accessories, ensuring all are inspected, certified, and fit for purpose
Assist Appointed Persons and Supervisors in planning and executing lifts, including confined or restricted environments
Rig and de-rig hoists, winches, chain blocks, and lifting frames as required
Work with cranes, overhead lifting systems, powered lifting tools, and manual handling aids
Strictly follow nuclear site safety rules, including SPA/CCNSG, permit-to-work systems, radiological controls, and isolation procedures
Complete pre-job briefs, toolbox talks, and dynamic risk assessments
Maintain accurate records of rigging activities, equipment checks, lifting gear registers, and reporting of defects
Adhere to LOLER, PUWER, and site-specific nuclear safety regulations
Operate at all times with full awareness of nuclear safety culture, zero-harm principles, and contamination control requirements

Fulltime

Mobile Crane Operator (CN) – 3/1

The Opportunity: Mineral Resources is actively seeking experienced Crane Operato...

Location

Australia , Pilbara

Salary:

Not provided

Mineral Resources

Expiration Date

Until further notice

Requirements

Experience working within the mining, construction and resources industry
HRWL – CN
Construction White Card
Unlimited Australian working rights
National Police clearance (12 months)
Ability to pass a Pre-employment Medical and a Drug / Alcohol Screen

Job Responsibility

Ensure safety protocols and procedures are strictly adhered to maintaining a safe and efficient work environment
Complete daily site crane inspections prior to start-up and record all findings
Follow hand signals, radio communication, or written instructions to coordinate with riggers and site supervisors
Observe all rigging techniques prior to performing any lift to ensure the lifting is rigged correctly and has the capacity to perform the lift safely
Assess the weight of all loads and ensure they are within crane capacity
Loading and unloading trucks
General pick and carry activities supporting larger cranes and major installations across the site
Report any unsafe conditions or equipment malfunctions immediately

What we offer

3/1 roster on a permanent contract
Perth point of hire
Varied style of accommodation on offer
Attractive base rate plus penalties, with additional site allowances, severance and project completion bonuses
Construction works anticipated across our owner operator site and external clients
Access to a range of benefits to look after the important things in life – family, health, fun and your future

Fulltime

Crane Operator / Rigger

Amentum

Location:

Category:
Logistics

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
February 14, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Crane Operator / Rigger

Marina Heavy Crane Operator

Crane and Rigging Supervisor

Transportation Heavy Equipment Mechanic Equipment Inspector Tester

Rigger

Crane Operators (C1/CO)

Rigger

Rigger

Mobile Crane Operator (CN) – 3/1

Crane Operator / Rigger

Amentum

Location:

Category:Logistics

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:February 14, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Crane Operator / Rigger

Marina Heavy Crane Operator

Crane and Rigging Supervisor

Transportation Heavy Equipment Mechanic Equipment Inspector Tester

Rigger

Crane Operators (C1/CO)

Rigger

Rigger

Mobile Crane Operator (CN) – 3/1

Category:
Logistics

Contract Type:
Not provided

Job Posted:
February 14, 2026