Controls Design Engineer - Vision Systems Job at ATS Automation Tooling Systems Inc. (Lewis Center)

Senior Vision Controls Design Engineer

As a Controls Design Vision Engineer you will be the driving force behind bringi...

Location

United States , Lewis Center

Salary:

Not provided

ATS Automation Tooling Systems Inc.

Expiration Date

Until further notice

Requirements

Post-secondary degree or diploma in mechanical, electrical, systems, or computer engineering is preferred
Certified Vision Professional (CVP) is an asset
6+ years of experience in engineering design, development, programming and commissioning vision systems, automated systems, custom machinery or industrial equipment
Understanding and hands-on experience with PLCs, robotics control systems and machine operation is an asset
Effective communication skills both verbally and in writing with the ability to work either independently and part of a team in fast-paced environments
Strong programming, mechanical and electrical problem solving skills

Job Responsibility

Design and develop machine vision solutions specific to customer and project requirements based on standard ATS programming methods
Debug and commission control systems at our facility and on-site at customer locations
Select, test and integrate hardware and software components for vision systems (lenses, polarization filters, vision algorithms) with robots, analog devices, motion controllers, sensors, dispense systems and lasers
Work with other members of the control systems design department and other groups to continuously improve methods of integrating controls technology, with the goals being enhanced safety, enhanced functionality and reduced cost
Work with other members of the control systems design department and other groups to ensure that labor and material budgets as well as scheduled delivery dates are adhered to or improved upon
Work with customers, project managers, designers, toolmakers and electricians to solve problems in order to provide the customer with a complete, functional automation system
Provide thorough testing of machine functionality to verify software program completeness
Provide accurate documentation for each project
Advise customer on solving technical problems
Follow and contribute to quality program (ex. ISO / NQA) procedures

What we offer

Flexible work schedules
Employee events
Free coffee beverages
Employee referral program
Safety shoe programs
Competitive starting salaries
Overtime pay eligibility
Paid vacation
Company paid short- and long-term disability and life insurance
Comprehensive health benefits

Fulltime

Controls Design Vision Engineer

As a Controls Design Vision Engineer you will be the driving force behind bringi...

Location

United States , Lewis Center

Salary:

Not provided

ATS Automation Tooling Systems Inc.

Expiration Date

Until further notice

Requirements

Post-secondary degree or diploma in mechanical, electrical, systems, or computer engineering is preferred
Certified Vision Professional (CVP) is an asset
6+ years of experience in engineering design, development, programming and commissioning vision systems, automated systems, custom machinery or industrial equipment
Understanding and hands-on experience with PLCs, robotics control systems and machine operation is an asset
Effective communication skills both verbally and in writing with the ability to work either independently and part of a team in fast-paced environments
Strong programming, mechanical and electrical problem solving skills
Work in conformance with divisional health, safety and environmental procedures and compliance to legislative requirements
Refrain from removing or altering safety devices or guarding unless hazardous energies are controlled through lockout-tagout methods
Report any unsafe conditions or unsafe acts, defects in any equipment or protective device, and any accidents/incidents to the supervisor
Ensure that the required protective equipment is used for assigned tasks

Job Responsibility

Design and develop machine vision solutions specific to customer and project requirements based on standard ATS programming methods
Debug and commission control systems at our facility and on-site at customer locations
Select, test and integrate hardware and software components for vision systems (lenses, polarization filters, vision algorithms) with robots, analog devices, motion controllers, sensors, dispense systems and lasers
Work with other members of the control systems design department and other groups to continuously improve methods of integrating controls technology, with the goals being enhanced safety, enhanced functionality and reduced cost
Work with other members of the control systems design department and other groups to ensure that labor and material budgets as well as scheduled delivery dates are adhered to or improved upon
Work with customers, project managers, designers, toolmakers and electricians to solve problems in order to provide the customer with a complete, functional automation system
Provide thorough testing of machine functionality to verify software program completeness
Provide accurate documentation for each project
Advise customer on solving technical problems
Follow and contribute to quality program (ex. ISO / NQA) procedures

What we offer

Competitive starting salaries
Overtime pay eligibility
Paid vacation
Company paid short- and long-term disability and life insurance
Comprehensive health benefits
401K matching program
Employee Incentive Bonus program
Optional Employee Share Purchase Program
Flexible work schedules
Employee events

Fulltime

Senior Controls Design Engineer III

As a Controls Design Engineer with strong PLC control system expertise, you will...

Location

United States , Lewis Center

Salary:

Not provided

ATS Automation Tooling Systems Inc.

Expiration Date

Until further notice

Requirements

Post-secondary degree or diploma in mechanical, electrical, systems, or computer engineering is preferred
6+ years of experience in engineering design, development, programming and commissioning automated systems, custom machinery or industrial equipment
Thorough understanding and hands-on experience with PLCs, robotics control systems and machine operation
Strong PLC programming, mechanical and electrical problem solving skills
Effective communication skills both verbally and in writing with the ability to work either independently and part of a team in fast-paced environments

Job Responsibility

Design and develop software programs (PLC and/or PC based) specific to customer and project requirements based on standard ATS programming methods
Debug and commission control systems at our facility and on-site at customer locations
Select, test and integrate hardware and software components such as robots, analog devices, motion controllers, sensors, vision systems, dispense systems and lasers
Work with other members of the control systems design department and other groups to continuously improve methods of integrating controls technology, with the goals being enhanced safety, enhanced functionality and reduced cost
Work with other members of the control systems design department and other groups to ensure that labor and material budgets as well as scheduled delivery dates are adhered to or improved upon
Work with customers, project managers, designers, toolmakers and electricians to solve problems in order to provide the customer with a complete, functional automation system
Provide thorough testing of machine functionality to verify software program completeness
Provide accurate documentation for each project
Advise customer on solving technical problems
Follow and contribute to quality program (ex. ISO / NQA) procedures

What we offer

Flexible work schedules
employee events
free coffee beverages
employee referral program
safety shoe programs
Overtime pay eligibility
paid vacation
company paid short- and long-term disability and life insurance
comprehensive health benefits
401K matching program

Fulltime

Senior Robotics / Controls Design Engineer

As a Senior Robotics / Controls Design Engineer you will be the driving force be...

Location

United States , Lewis Center

Salary:

Not provided

ATS Automation Tooling Systems Inc.

Expiration Date

Until further notice

Requirements

Post-secondary degree or diploma in mechanical, electrical, systems, or computer engineering
6+ years of experience in engineering design, development, programming and commissioning automated systems, custom machinery or industrial equipment
Strong programming, mechanical and electrical problem solving skills
Thorough understanding and hands-on experience with PLCs, robotics control systems and machine operation
Demonstrated hands-on experience with robotics and control systems
Effective communication skills both verbally and in writing with the ability to work either independently and part of a team in fast-paced environments

Job Responsibility

Design and develop software programs (PLC and/or PC based) specific to customer and project requirements based on standard ATS programming methods
Debug and commission control systems at our facility and on-site at customer locations
Select, test and integrate hardware and software components such as robots, analog devices, motion controllers, sensors, vision systems, dispense systems and lasers
Work with other members of the control systems design department and other groups to continuously improve methods of integrating controls technology, with the goals being enhanced safety, enhanced functionality and reduced cost
Work with other members of the control systems design department and other groups to ensure that labor and material budgets as well as scheduled delivery dates are adhered to or improved upon
Work with customers, project managers, designers, toolmakers and electricians to solve problems in order to provide the customer with a complete, functional automation system
Provide thorough testing of machine functionality to verify software program completeness
Provide accurate documentation for each project
Advise customer on solving technical problems
Follow and contribute to quality program (ex. ISO / NQA) procedures

What we offer

Flexible work schedules
Employee events
Free coffee beverages
Employee referral program
Safety shoe programs
Overtime pay eligibility
Paid vacation
Company paid short- and long-term disability and life insurance
Comprehensive health benefits
401K matching program

Fulltime

Senior Controls Systems Engineer - PLC

We are Generac, a leading energy technology company committed to powering a smar...

Location

United States , Waukesha

Salary:

Not provided

Energy Systems

Expiration Date

Until further notice

Requirements

Bachelor of Science Degree in Engineering, Computer Science, or related discipline
7+ years of experience with Rockwell Logix
Frequent travel to other Generac sites for support as needed. (Generally day trips)

Job Responsibility

Develop new and or improved processes through the application of theoretical and practical engineering
Design and build out factory level, and line/machine level controls standards and specification for application by internal equipment development team and external partners
Acts as the corporate SME for plant resources on control systems programing by architecting, writing and debug PLC ladder logic/IPC SW with an emphasis on generating code that is organized, structured, documented, maintainable and reusable. PLC code will interact with subsystems such as conveyors, robots, Manufacturing Execution System MES, machine vision, part tracking systems, and 3rd party equipment.
Implement (ANSI/ RIA15.06/OSHA compliant) control reliable safety systems for safeguarding robots, gantries, conveyors, and other high volume manufacturing equipment
Generate aesthetically simple HMI screens for complex machinery while providing sufficient feedback for troubleshooting
Work with IT to connect manufacturing assets to enterprise network using established standards / guidelines
Keeps abreast of all meaningful technical trends and developments and incorporates them in appropriate assignments
Create request for Quotation/Proposal (RFQ/RFPs), Organize cross-functional reviews of the machine requirements, design, qualification and capability and engage machine suppliers for automated equipment design reviews and proposals
Travel to the machine suppliers for equipment qualification, acceptance testing and support during build events

What we offer

Competitive Benefits: Health, Dental, Vision, 401k and many more
State-of-the-art facility with an onsite gym, walking trails, café, free parking and many employee activities
Scheduled events throughout the year that allow our employees, both current and retirees, to gather together and enjoy their time with their families and co-workers
Eligible for summer hours! (Memorial Day – Labor Day)
Pride! When a storm strikes, Generac employees always rise to the occasion. Each time a storm hits many employees volunteer their time with the customer support team or on the production line while others go right into storm-affected areas to repair generators
We believe in having fun. From minor celebrations to major events, our employees balance their work by building a strong culture of teamwork and collaboration through a variety of occasions, including our Fun Days.
Every day is Jeans Day! Dress for your day.
Product loan and discount programs

Fulltime

Engineer /Sr Engineer- Controls

Job Description Sponsorship:  GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSH...

Location

India , Bengaluru

Salary:

Not provided

General Motors

Expiration Date

Until further notice

Requirements

Masters/ bachelor's degree in electrical engineering / Electronics Engineering / Instrumentation Engineering
10+ years' experience in any Automotive companies or Software Companies with Automation background
In depth knowledge of control systems and/or control systems in automotive assembly plants
Knowledge on PLC, HMI, Drives, Networks along with strong programming skills preferably Rockwell PLC
Project management and site execution skills
Thorough knowledge of Rockwell PLC software, Siemens HMI software as well as interfaces to other controls systems
Knowledge of Emulation softwares like Emulate 3D, etc
Knowledge of Machine Vision hardwares/softwares (Matrox)
Thorough knowledge of PLC hardware and software design and engineering
Knowledge of design for health and safety will be helpful

Job Responsibility

Supervise and control projects including project scope, issues, risks and schedule. Handle issues to closure. Communicate project status and ensures all internal customers are aware of progress through project meetings, status reports and reviews
Participate in Investment studies, preliminary design discussions for any new or expansion projects
Responsible for inhouse engineering on Hardware designs, software designs, Emulation, Integration & Commissioning at site
If its Turnkey project, Guide & approve Hardware/ Software designs done by contractors for various project in the region. Conduct offline testing & Buyoff at supplier’s site
Implement GM Global tools for design of hardware & software to ensure minimum debug on site. Train suppliers and Engineers of other GM units
Validate designs and provide feedback to Global Centre w.r.t GM standards
Responsible for deploying GM Global standards across all projects
Responsible for training and Integrating Suppliers to enforce to GM standards
Responsible for performing Root cause analysis
Prepare & Share lessons learnt for the projects completed

Fulltime

Sr. Engineer / Lead Engineer- BIW Processing & Tool Design

Mid-level Processing & Tool Design engineer; able to work autonomously with occa...

Location

India , Bengaluru

Salary:

Not provided

General Motors

Expiration Date

Until further notice

Requirements

Bachelor’s degree in mechanical/production/Automobile/Industrial Engineering
Minimum 6-10 years of experience working in automotive industry / equivalent field
Strong understanding of automotive manufacturing processes, tool designs and materials handling systems
Proficiency in Microsoft Office Suite applications such as Excel, PowerPoint, Word, Access, SharePoint, etc.
Sound Knowledge in Siemens NX -Modelling/Drafting Knowledge along with GM Toolkit
Knowledge of TcAE
Excellent verbal and written communication skills
Timings: General / Late General shift to support global operations.

Job Responsibility

Execute Tool design done as per MPMs or suggested datum strategy, Input checking for the data received from GMNA
Responsible to execute & coordinate for tool design & weld template for Pre-production operation-PTB builds, Tool Design for Innovation / Optimization projects of manufacturing operations
Perform Tool design Internal/ Stake holder review with approval & Detailing for the approved tool with all deliverables
Revise the Tool design as per change log
Responsible for Supplier/Stake holders’ coordination & issue resolution in Tooling activities
Delivery of the design kits to stake holders in Teamcenter
Communicate with customer for reviews and Query resolution
Weld template creation for new tools from MPMs & revision as per change log
Sound knowledge of GD&T, understanding of Clamping and Locating concept (CDLS)
Project kickoff and wrap up documents. Drive project productivity improvement activity

Fulltime

New

Senior Principal Controls Engineer

Ser ingeniero en Baxter significa que usted desempeña un papel fundamental para ...

Location

United States , Marion

Salary:

128000.00 - 176000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor's degree in Engineering required (Electrical, Mechanical or Mechatronics Engineering preferred)
8+ years of experience in a similar role
8+ years of Rockwell PLC experience
Servo control systems (Rockwell, Yaskawa)
Ability to read and write electrical schematics
Hands on mechanical
AutoCAD drafting
PLC: Allen-Bradley Control Logix, AB500, Safety PLCs
HMI: Allen-Bradley
Communication: Understanding of TCP/IP networks, RS-232 interfaces, Profibus communication, Fieldbus and HSSB

Job Responsibility

Develop or participate in the development of solutions to problems for assigned projects
Participate in continuous improvement projects
Work with manufacturing and other functional groups on manufacturing regulatory compliance issues
Write, implement, and report on validation activities
Design and perform routine testing, project experiments, and analysis of data and report on results
Perform engineering studies on new equipment to resolve accurate settings, control points, etc. including data gathering during start up and test batches
Initiate new or revision of protocols/operating instructions specific to the project
Perform NCR/CAPA investigations and tasks
Lead and complete change control activities related to equipment
Perform work assignments within production department that include training and technical support

What we offer

Medical and dental coverage starting on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP)
401(k) Retirement Savings Plan (RSP)
Flexible Spending Accounts
Educational assistance programs
Paid holidays
Paid time off ranging from 20 to 35 days based on length of service
Family and medical leaves of absence
Paid parental leave

Fulltime

Select Country

Controls Design Engineer - Vision Systems

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?