Control Technician - Evenings Job at Biscuits Leclerc Ltd (Montgomery)

Avionics/Electronics Technician - Evening Shift

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Windsor Locks

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Avionics / electric A/C Technical School or other substantiated equivalent
Typically 2+ years' avionics work experience or substantiated equivalent experience
Ability to read and understand electrical engineering drawings
Ability to effectively communicate in both written and verbal form on individual and / or aircraft status
Own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
Must obtain appropriate Ground Support Equipment Qualifications as required
Must be able to work unscheduled overtime including nonscheduled work days and holidays
Must be able to work in seasonal/inclement weather outside
Ability to obtain a Security Identification Display Area badge (SIDA) (if applicable)
A Certification if required by customer (Commercial Aircraft)

Job Responsibility

Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hangar positions)
Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner
Troubleshoot, repair, inspect, modify and service aircraft avionics, electrical and electronic equipment
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required
Assist with mechanical / electrical removals and installations
Perform other duties as assigned
May assist with maintenance at off-site locations
Assist other maintenance disciplines

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Control Technician - Evenings

Reporting to the Maintenance manager, the maintenance control technician is resp...

Location

United States , Montgomery

Salary:

Not provided

Biscuits Leclerc Ltd

Expiration Date

Until further notice

Requirements

Technical degree in industrial controls/PLC or equivalent education/experience
5-10 years of relevant experience in industrial manufacturing environment, preferably in the food industry
Practical experience and working knowledge of Rockwell components and software, such as: RS logix 500/5000, Factory talk View Studio, Panel Builder
Must possess effective written and verbal communication skills
Must possess a strong curiosity, willing to learn and understand the plant’s ever evolving technology
Must be able to work flexible hours including overtime, weekends, and holidays

Job Responsibility

Troubleshoot faulty equipment, diagnose malfunctions, perform corrective actions to restore working condition
Maintain and repair PLCs, VFDs, vision system, sensors, communication network, control panels and other control related equipment and components
Program PLCs, VFDs, servos, HMI as required
Install, test and calibrate electronics components in systems and control panels
Assist major issues by being the on-site hands and eyes of a remotely connected OEM
Update schematics when changes are made
Develop a deep understanding of the plant’s equipment ladder programming
Become the industrial control expert and go-to resource in the plant
Perform all duties with diligence and attention to details

What we offer

Earn a competitive salary
Enjoy cookies at will
Benefit from a comprehensive benefits program
Save on our products
Embrace high velocity technology

Fulltime

Service Technician

Are you ready to take on a hands-on role with a global leader in access solution...

Location

Belgium , Zaventem

Salary:

Not provided

Parking Network B.V.

Expiration Date

Until further notice

Requirements

You have a degree in Electrical Engineering or a similar field.
You are eager to learn and want to grow in a customer-oriented, hands-on engineering role.
You are interested in IT and enjoy working with technology.
You have experience with software updates and patching.
You have excellent communication skills and enjoy working independently, but are also a team player.
You are fluent in Dutch and can get by in French and English.
You are flexible, proactive and enjoy the challenge of working in a dynamic field service position.

Job Responsibility

Install and maintain SKIDATA's access control and parking management systems, ensuring optimal performance in Belgium.
Acting as the face of SKIDATA: you maintain strong relationships with customers and ensure that they are satisfied with our products and services.
Diagnosing and resolving on-site faults to minimise disruption to our customers' operations.
Working independently on projects, with flexibility in prioritizing tasks and responding to changing customer needs.
Be available for on-call services (every 5 weeks), so that the systems remain operational even outside regular working hours, for an additional fee.

What we offer

Excellent salary
Working together in a highly innovative environment
Plenty of room for own initiative and responsibility
An organization with an informal working atmosphere, hands-on mentality, short lines of communication and ownership
20 + 5 vacation days + 6 ADV days
Lease-a-bikeplan
Joint Committee 200
Access to electric vehicle charging stations in our parking area to support eco-friendly commuting
Working together with an international team of specialists, sharing knowledge and insights with colleagues from diverse backgrounds
Excellent opportunities for career development and further development of your skills

Fulltime

Access Control Technician

We’re seeking a Access Control Technician to support the installation, repair, a...

Location

United States , Greenville

Salary:

Not provided

Robert Half

Expiration Date

Until further notice

Requirements

Minimum of one year of experience working in physical security, electronics, IT support, or another technical service discipline
Practical, hands‑on familiarity with access control systems and video surveillance technologies
High school diploma or equivalent educational background
Valid driver’s license with the ability to operate company vehicles as needed
Must be able to meet all background check and drug‑screening requirements
Comfortable using basic measurement tools—such as tape measures and levels—with precision
Willing to adjust work hours when projects require evening or weekend availability
Capable of working on ladders or lifts and routinely handling materials in the 25–50 pound range.

Job Responsibility

Install, diagnose, and maintain low‑voltage infrastructure, including category cabling, component wiring, fiber connections, and related system elements
Service access control systems, door hardware, and integrated security devices to ensure consistent performance
Assist with the setup, operation, and maintenance of video surveillance systems, including cameras and supporting components
Build and manage cable pathways that support security technologies and network systems
Properly use, inspect, and maintain company‑provided tools and equipment to ensure safe and reliable operation
Work collaboratively with other technicians and onsite staff to complete service tasks accurately and on schedule
Adhere to safety standards and established field practices across installation, construction, and service environments
Support additional field service activities as needed while contributing to a positive, team‑oriented work culture.

What we offer

medical
vision
dental
life and disability insurance
company 401(k) plan

Control Technician - Electrical

JOB FUNCTION: Install, maintain, test, startup, and adjust a wide variety of ele...

Location

United States , Chantilly

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

Journeyman Electrical License
Working experience in electrical, industrial electronics, and electro-pneumatics
Ability to read, interpret, and troubleshoot using electrical schematics, loop diagrams, control logics, mechanical drawings, and piping & instrument diagrams (P&ID’s)
Five years working experience with 120VAC
Working knowledge of PLC programming
Must be able to read, interpret, and troubleshoot ladder logic from computer terminal
Knowledgeable in direct digital control (DDC) and other forms of electronic controls
Hands-on experience in calibration and maintenance of electronic and / or electro-pneumatic control system equipment
Hands-on experience in repair and troubleshooting of motor control centers and variable frequency drives (VFD’s)
Ability to quickly learn operating and control systems for principal site-specific systems including, but not limited to, the electrical distribution system, turbine generators, chillers, boilers, incinerators, and HVAC equipment

Job Responsibility

Install, maintain, test, startup, and adjust a wide variety of electrical, electronic, electropneumatic, and electro-mechanical instrumentation and control systems/equipment
Read, interpret, and troubleshoot site E&C system deficiencies using electrical schematics, loop diagrams, control logics, mechanical drawings, and piping & instrument diagrams (P&IDs)
Troubleshoot indiscriminately both the mechanical and electrical sides of systems
Maintain as-built logics, control loop diagrams, and documentation for all assigned systems
Install, program, troubleshoot, calibrate, tune, preventive and predictive maintenance (condition monitoring), replace and repair all assigned E&C systems and all associated electrical, electronic, electropneumatic, and electro-mechanical components, including instrumentation and end-elements
Troubleshoot hardware and software problems
perform simple programming, data base changes, and alarm log reviews
perform and maintain system back-ups and history database files
develop and install graphics to enhance operation and maintenance
and perform miscellaneous administrative functions as directed by E&C Engineer on site’s microprocessor-based central control systems

Fulltime

Industrial Electrical Controls Technician

Amentum is seeking a skilled Industrial Electrical Controls Technician to join o...

Location

United States , Lafayette

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

Bachelor’s degree in engineering, Facility Management, Industrial Technology, Computer Science, or an equivalent combination of education and 6 years of relevant experience
Experience with Computerized Maintenance Management Systems (CMMS) such as Maximo or other platforms
Demonstrated experience in root cause analysis, cost savings strategies, and implementing corrective actions
Ability to work various shifts, including overtime, weekends, and holidays when required
Must pass a pre-employment substance abuse test and hold a valid driver’s license
U.S. work authorization is required (sponsorship is not available for this role)
Ability to obtain a security access badge at the client’s location
Frequently perform repetitive wrist movements and walk extensively during shifts
Read and interpret documents, schematics, and computer data
Regularly use office equipment, including computers and keyboards, to manage documentation and communicate

Job Responsibility

Act as the IoT and controls Subject Matter Expert (SME), developing strategies to optimize asset performance, reducing costs, and improving uptime through the collection and analysis of machine data
Design and create visualization screens to track and analyze key metrics for real-time equipment performance
Proactively identify and address critical asset issues, perform root cause analysis (RCA), and implement corrective solutions
Lead continuous improvement initiatives for equipment IT programs and communicate challenges, opportunities, and successes to management and clients
Develop and coordinate plans for facility shutdowns, turnarounds, and outages to ensure programming and communication requirements are met
Leverage advanced knowledge of PLC, HMI, and SCADA programming systems, including Allen Bradley, Siemens, Modbus, Profinet, and similar platforms
Diagnose and optimize electrical and mechanical aspects of production systems, leading efforts to improve reliability
Collaborating with maintenance teams and site leads to ensure peak efficiency and share best practices

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Maintenance Technician - Evenings

Reporting to the Maintenance Manager, the Maintenance Technician conducts, maint...

Location

United States , Montgomery

Salary:

Not provided

Biscuits Leclerc Ltd

Expiration Date

Until further notice

Requirements

Technical Associate Degree or accredited apprenticeship program or the equivalent in a technical field
Three (3) year applicable experience or an equivalent combination of education and experience
Equipment knowledge, Computer experience/operation and PLC troubleshooting are necessary (Allen-Bradley preferably)
Knowledge of electrical/ electronic components and equipment including the use of special instruments for diagnostic purposes
Ability to establish and maintain effective working relationships and effective communication with peers, supervisors
Must be flexible with work hours and be able to work overtime and weekends when needed.

Job Responsibility

Follow required safety practices (e.g. lock-out tag-out, PPE, confined space, chemical, fall protection)
Work in line with safety and GMP guidelines
Troubleshoot, maintain/repair high-speed manufacturing and packaging equipment
Troubleshoot, maintain&repair mechanical, hydraulic, pneumatic and electrical systems (e.g. controls, numeral controls, power supplies, drives, gages and test equipment)
Adjust equipment for performance and safety
Advise operators and line mechanics on safe use of equipment
Document and track corrective and preventive maintenance performed, to reduce downtime
Perform preventive maintenance
Install machines, wiring and programs
Solve complex technical issues

What we offer

Earn a competitive salary
Enjoy cookies at will
Benefit from a comprehensive benefits program
Save on our products
Embrace high velocity technology

Fulltime

Maintenance Technician - Evenings

Reporting to the Maintenance Manager, the Maintenance Technician conducts, maint...

Location

United States , Montgomery

Salary:

Not provided

Biscuits Leclerc Ltd

Expiration Date

Until further notice

Requirements

Technical Associate Degree or accredited apprenticeship program or the equivalent in a technical field
Three (3) year applicable experience or an equivalent combination of education and experience
Equipment knowledge, Computer experience/operation and PLC troubleshooting are necessary (Allen-Bradley preferably)
Knowledge of electrical/ electronic components and equipment including the use of special instruments for diagnostic purposes
Ability to establish and maintain effective working relationships and effective communication with peers, supervisors
Must be flexible with work hours and be able to work overtime and weekends when needed.

Job Responsibility

Follow required safety practices (e.g. lock-out tag-out, PPE, confined space, chemical, fall protection)
Work in line with safety and GMP guidelines
Troubleshoot, maintain/repair high-speed manufacturing and packaging equipment
Troubleshoot, maintain&repair mechanical, hydraulic, pneumatic and electrical systems (e.g. controls, numeral controls, power supplies, drives, gages and test equipment)
Adjust equipment for performance and safety
Advise operators and line mechanics on safe use of equipment
Document and track corrective and preventive maintenance performed, to reduce downtime
Perform preventive maintenance
Install machines, wiring and programs
Solve complex technical issues

What we offer

Earn a competitive salary
Enjoy cookies at will
Benefit from a comprehensive benefits program
Save on our products
Embrace high velocity technology

Fulltime

Select Country

Control Technician - Evenings

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?

Control Technician - Evenings

Avionics/Electronics Technician - Evening Shift

Control Technician - Evenings

Service Technician

Access Control Technician

Control Technician - Electrical

Industrial Electrical Controls Technician

Maintenance Technician - Evenings

Maintenance Technician - Evenings

Our AI answers in your language