CrawlJobs Logo

Construction Inspector II

goodyearaz.gov Logo

City of Goodyear, AZ

Location Icon

Location:
United States , Goodyear

Category Icon
Category:

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

31.86 - 47.29 USD / Hour

Job Description:

Performs quality assurance inspections and related activities for construction projects within the City including developer related infrastructure projects and City capital improvement projects for grading, drainage, water, sewer, streets, traffic control, landscape warranty, and other related items. Reviews, approves, and documents field changes in assigned area. Approves traffic control and monitors landscape warranty maintenance permits. Maintains proper documentation of projects throughout two (2) year warranty maintenance period. Performs warranty inspections on storm drain, water, sewer, concrete, paving, sign, stripe, landscape and generate punch list for all deficiencies found. Upon completion of the punch list items, coordinates with developer to conduct warranty final inspection, accept project, and closeout for City to begin maintaining within right-of-way.

Job Responsibility:

  • Performs quality assurance inspections and related activities for construction projects within the City including developer related infrastructure projects and City capital improvement projects for grading, drainage, water, sewer, streets, traffic control, landscape warranty, and other related items
  • Reviews, approves, and documents field changes in assigned area
  • Approves traffic control and monitors landscape warranty maintenance permits
  • Maintains proper documentation of projects throughout two (2) year warranty maintenance period
  • Performs warranty inspections on storm drain, water, sewer, concrete, paving, sign, stripe, landscape and generate punch list for all deficiencies found
  • Upon completion of the punch list items, coordinates with developer to conduct warranty final inspection, accept project, and closeout for City to begin maintaining within right-of-way

Requirements:

  • Formal Education/Knowledge: Work requires knowledge of a specific vocational, administrative, or technical nature that may be obtained with six-months/one year of advanced study or training past the high school equivalency
  • Minimum three years of experience in a related field
  • Valid Driver's License
  • Reading: Work requires the ability to read general correspondence, construction plans and specifications, documents, engineering technical standards, installation standards, and engineering manuals
  • Math: Work requires the ability to perform engineering calculations, trigonometry, algebra, geometry
  • and general math calculations such as addition, subtraction, multiplication, and division
  • Writing: Work requires the ability to write general correspondence, memorandums, handouts, letters, and to enter and retrieve project data utilizing the City's computerized tracking system

Nice to have:

  • 4 or more years of civil construction inspection and testing experience relating to residential parcel development, industrial and commercial property development and dry utility installations
  • basic knowledge of safety and traffic control principles and concepts
  • proficient in reading and understanding civil construction plans and interpreting specifications and details
  • knowledgable in construction materials, means and methods as well as the ability to complete inspection reports and forms accurately
  • excellent customer service and interpersonal skills
  • be a self-motivator
  • be open to embrace the City of Goodyear Core Values and continuous improvement
  • be willing to adapt to change
What we offer:

This position may be eligible for a signing bonus, referral incentive and/or moving reimbursement

Additional Information:

Job Posted:
January 11, 2026

Expiration:
January 30, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Job Link Share:

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Construction Inspector II

Transportation Construction Inspector

An experienced NICET Level II certified Construction Inspector is needed for mul...
Location
Location
United States , Rochester
Salary
Salary:
42.00 - 43.00 USD / Hour
erdmananthony.com Logo
Erdman Anthony
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • A valid driver's license is required
  • A minimum of 2+ years of construction inspection experience
  • NICET Level II Certified or Equivalent based on experience
  • Experience completing Daily Work Reports
  • Provide a detailed resume highlighting your experience
Job Responsibility
Job Responsibility
  • Oversee contractors' work to ensure conformance with the contract documents
  • Ensure all work follows the NYSDOT Standard Specifications
  • Verify all materials on-site are from an approved source
  • Perform concrete field testing when necessary
  • Assure all MURK procedures required by the NYSDOT are followed
  • Address field and design changes as necessary
  • Prepare Daily Work Reports documenting completed work for payment to contractor
  • Fulltime
Read More
Arrow Right

Transportation Construction Inspector

An experienced NICET Level II or III certified Construction Inspector is needed ...
Location
Location
United States , Canastota
Salary
Salary:
42.00 - 56.00 USD / Hour
erdmananthony.com Logo
Erdman Anthony
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • A valid driver's license is required
  • A minimum of 2+ years of construction inspection experience
  • NICET Level II or Level III Certified or Equivalent based on experience
  • Experience completing Daily Work Reports
  • Provide a detailed resume highlighting your experience
Job Responsibility
Job Responsibility
  • Oversee contractors' work to ensure conformance with the contract documents and NYSTA standard specifications
  • Verify all materials on-site are from an approved source
  • Assure all MURK procedures required by the NYSTA are followed
  • Address field and design changes as necessary
  • Prepare Daily Work Reports documenting completed work for payment to contractor
  • Fulltime
Read More
Arrow Right

CWI NDT II Weld Inspector

We are looking for skilled and organized Process Pipe QARs (CWI or NDT Level II ...
Location
Location
Salary
Salary:
Not provided
amts.com Logo
AM Technical Solutions
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Must have a thorough understanding of acceptable industry standards for quality relative to all plastic, metal and/or hybrid piping materials likely to be used in microelectronics/high-tech industrial construction
  • Must have be a CWI or NDT Level II Technician
  • ASME B31.3 compliant weld certificate in one or more of the following methods
  • SMAW, GTAW, GMAW
  • ASME B31.3 compliant weld certificate (automatic orbital welding for high-purity gas systems)
  • Certified by George Fischer on one or more of the following PVDF fusion processes
  • GF Model IR 63
  • GF Model IR225
  • Be certified by a PVC/CPVC manufacturer in the fabrication of solvent cemented joints, the installation of valves, the assembly of mechanical (threaded) connections, and other piping system components
Job Responsibility
Job Responsibility
  • Responsible for writing, interpreting, and maintaining installation guidelines and situational bulletins and memos with compliance to existing contract guidelines
  • Content expert in piping construction and be able to deliver a message of expectations such that interpretation is not left to chance
Read More
Arrow Right

Qa/qc Coordinator

Location
Location
Qatar , Doha
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BSc degree or higher in Mechanical or Metallurgical Engineering from a recognized Engineering faculty
  • Valid CSWIP 3.2.1 or AWS Senior Welding Inspection Certificate (SCWI) with at least five years of post-certification experience
  • B Gas Grade 2 or NACE Level II Coating Inspector qualification is preferable
  • NDT Level II in RT, UT, PT & MT / NDT qualifications per ASNT or ISO requirements
  • Certified QMS Lead Auditor in accordance with ISO 9001:2015 with at least five years of auditing experience
  • Strong knowledge of international codes/standards: EN, ISO, API, ASME, ASTM
  • Good leadership and communication skills
  • Ability to work on projects in a complex, multicultural environment
  • Proficient in MS Office, database management, spreadsheets, and email communication
  • Minimum 15 years as QA/QC Coordinator or QA/QC Lead, leading multidiscipline QC inspector teams for inspection and testing activities on major oil and gas projects, including offshore process platforms, jackets, subsea pipelines, and all phases of manufacturing, fabrication, construction, and offshore installation
Job Responsibility
Job Responsibility
  • Report quality status daily to the Senior Quality Engineer
  • Supervise and coordinate all activities related to the Quality Management System during construction and installation phases
  • Ensure all works by contractors, subcontractors, vendors, manufacturers, service providers, and third-party inspectors comply with project specifications, corporate standards, international codes, and QA/QC requirements
  • Review technical and quality documents, ITPs, and QA/QC procedures in the document management system
  • Ensure approved QA/QC documents are implemented at worksite level, including quality plans, control procedures, ITPs, and inspection checklists
  • Lead and coordinate QC inspectors’ activities at fabrication sites, construction sites, and offshore installations
  • review inspection reports
  • Monitor contractor/vendor implementation of approved quality requirements and address deficiencies
  • Act as focal point for resolving shop/site-related quality control issues in consultation with senior quality management
  • Control and follow up on technical deviations, material substitutions, and changes to inspection/test requirements
Read More
Arrow Right
New

Transportation Construction Inspector

An experienced NICET Level II or III certified Construction Inspector is needed ...
Location
Location
United States , Syracuse, NY; Canastota, NY
Salary
Salary:
42.00 - 56.00 USD / Hour
erdmananthony.com Logo
Erdman Anthony
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • A valid driver's license is required
  • A minimum of 2+ years of construction inspection experience
  • NICET Level II or Level III Certified or Equivalent based on experience
  • Experience completing Daily Work Reports
  • Provide a detailed resume highlighting your experience
Job Responsibility
Job Responsibility
  • Oversee contractors' work to ensure conformance with the contract documents and NYSTA standard specifications
  • Verify all materials on-site are from an approved source
  • Assure all MURK procedures required by the NYSTA are followed
  • Address field and design changes as necessary
  • Prepare Daily Work Reports documenting completed work for payment to contractor
  • Fulltime
Read More
Arrow Right
New

Certified Welding Inspector - Non-Destructive Testing

As a Certified Welding Inspector with experience in structural steel inspections...
Location
Location
United States , Monroe
Salary
Salary:
Not provided
olsson.com Logo
Olsson
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Strong communication skills
  • Ability to contribute and work well on a team
  • Must have previous structural steel experience required
  • Certified Welding Inspector (CWI)
  • AWS D1.1 experience
  • NDT Level II certification preferred
  • Proficiency in Microsoft office (Word, Excel, and Outlook)
  • ICC (International Code Council) Bolting & Welding
Job Responsibility
Job Responsibility
  • Perform intermediate-level site inspections
  • Prepare reports
  • Manage files
  • Be involved in different stages of construction
  • Work in all types of terrain and weather conditions
What we offer
What we offer
  • Use of a company truck for transportation to and from job sites
  • Applicable PPE (personal protective equipment) provided
  • Work boot reimbursement program
  • Company issued laptop
  • Cell phone reimbursement options
  • Competitive 401(k) match
  • Tailored development paths
  • Possibility for flexible work arrangements
  • Wellness program promoting balanced lifestyles
  • Traditional benefits package (health care, vision, dental, paid time off, etc.)
  • Fulltime
Read More
Arrow Right

Senior Subsea Pipeline Marine Inspector

Airswift are a Global Manpower Provider specializing in the Energy, Infrastructu...
Location
Location
Qatar , Doha
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in engineering discipline (Mechanical) with demonstrated knowledge and experience
  • CSWIP 3.4UC Underwater Inspection Controller (Ref. CSWIP Document No.CSWIP-DIV-7-95 – Part 2)
  • Current / valid BOSIET, TBOSIET, FOET or TFOET certificate (Ref. OPITO requirements), as applicable, in conjunction with an offshore medical certificate
  • Experience in conducting QMS audits and QA verification programs for various project phases (i.e., Engineering, Procurement, Construction and Installation (specifically, the Repair / Installation of pipelines and their associated infrastructure) would be preferable
  • At least six (6) years of working experience in Quality Assurance and Control (QA/QC) within the Oil and Gas industry (i.e., onshore and offshore)
  • Should have a proven history as a lead 3.4UC underwater inspection controller within demanding subsea/offshore projects
  • Subsea pipeline project experience is highly desired, with emphasis on pipeline operations, integrity assurance/non-destructive testing (NDT) and inspection, maintenance and/or design and construction
  • Familiarity with marine vessel operations and the organisational responsibility of the (i) Offshore Construction/Installation Manger, (ii) Vessel Master, (iii) Diving and ROV Supervisors, (iv) Client Representative(s), (v) Certifying Authorities, etc.
  • Knowledge and working experience of underwater inspection (UWI) in the form of visual inspection and non-destructive testing (NDT) conducted by means of the intervention of diver(s) and/or remotely operated vehicle (ROV) or crewed submersible (i.e., either as a practitioner and/or as the result of training or certification conforming to the requirements of CSWIP Document No. CSWIP-DIV-7-95 – Part 1 and 2)
  • With respect to UWI and other related activities, shall be familiar with (i) relevant subsea applied inspection systems, (ii) recording and processing of data, (iii) quality assurance (QA), (iv) inspection planning and briefing, (v) the capabilities and limitations of divers/ROV’s and submersibles, and (vi) the care and deployment of equipment
Job Responsibility
Job Responsibility
  • Ensure compliance with QatarEnergy LNG systems and processes, including the Project Management System. Engage contractors and applicable third-party organisations with a professional approach and maintain a good working level relationship
  • Have a knowledge of the front end engineering design (FEED) deliverables and engineering study reports to support the implementation of the Project Quality Plan (PQP) and associated Procedures
  • Review the project Scope of work, to determine the nature, extent, and frequency of quality verification activities
  • Monitor, evaluate and report the inspection and testing status of the pipeline repair activities
  • Maintain interface relationships with Subsea Pipeline Repair Installation, and Inspection Contractors (including nominated specialist third-party Contractor organisation(s)), and the applicable regulatory focal points
  • especially, those functioning offshore
  • Review Contractor’s and Vendor’s quality reports / deliverables, in line with the project quality requirements
  • In conjunction with the QA/QC delegation operating offshore, verify that the repair activities are in accordance with approved documented information (i.e. procedures, specifications, detailed methodologies, etc)
  • Support the underwater inspection (UWI) activities during the offshore / subsea repairs, by means of the development of job records, preparation of daily reports, review of diver commentary and transfer into the written form, interpretate ROV camera footage and transfer into the written form and be able to produce an oral commentary of the daily activities, as and when required
  • Monitor the technical inspections, verification, certification and acceptance by Specialist Third Party Inspection (TPI) Contractor, as applicable, and develop the final documentation for each offshore campaign (i.e., PL-49, PL-75, PL-610 and PL-811)
  • Fulltime
Read More
Arrow Right
New

Quality Lead II

Join a leading company in the construction industry as a Quality Lead II, where ...
Location
Location
United States , Midland
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Engineering, Quality Management, or related field preferred
  • Minimum 5 years in quality management within the construction industry
  • Strong understanding of quality management systems in construction
  • Experience in managing construction scope effectively
  • Proficient in quality assurance and control processes
  • Working experience with flow lines, pipelines, wells, and compressors is preferred
Job Responsibility
Job Responsibility
  • Provide leadership to implement engineering, procurement, and site quality systems
  • Ensure services, equipment, and materials meet contract and statutory requirements
  • Evaluate and monitor Contractor's quality management systems for performance improvement
  • Oversee development and implementation of Project specific Surveillance Plans and Procedures
  • Monitor metrics to identify, investigate, and resolve quality issues
  • Provide direction to discipline inspectors and support the Project Team on quality issues
  • Promote quality awareness throughout the project
What we offer
What we offer
  • Competitive salary based on qualifications and experience
  • Fulltime
Read More
Arrow Right