Construction HSE Engineer Job at Met T&S (Al Ruwais, Abu Dhabi)

Construction HSE Engineer

Construction HSE Engineer reports to the HSM or, while he/she is the TCM HSE rep...

Location

Saudi Arabia , Al Jubail

Salary:

Not provided

Met T&S

Expiration Date

Until further notice

Requirements

A Bachelor’s Degree in any Engineering Course
NEBOSH GC/IGC, Diploma in Safety or any other HSE Certification (considered at ADNOC Group discretion)
Additional HSE Trainings / Certifications will be added advantage
ADNOC approved will be an advantage
Minimum of 10 years work experience
Significant experience in a similar position on EPC Oil & Gas projects/ Refinery
Comm/Pre-Comm work is mandatory for this vacancy
In-depth knowledge of local and international food safety standards and regulations
Strong analytical skills and attention to detail
Excellent communication and interpersonal skills

Job Responsibility

To perform the job hazardous analysis (JHA) and participate to the Job Safety Analysis (JSA)
Verify the adequacy and application of the site HSE plan and all related procedures, to the preparing any revisions
To update the HSE documentation during all the construction phases when deemed necessary
To check that subcontractors perform their activities in accordance with all the HSE applicable procedures, regulation and standards, promoting all necessary action to ensure that the said procedures and regulations are observed
To organize, plan and participate to periodical HSE walk around, inspections and audits on site, prepare all the relevant reports, action plans, verify the follow up and the timely execution of the corrective action
To organize, coordinate and directly participate in the HSE training activities on site
To organize and participate to all relevant site HSE meetings, prepare the relevant MOM
To cooperate with the client concerning the issue of any necessary work permits
To organize in case of work accidents a full investigation of the event, finalized to the identification of corrective measure to avoid reoccurrence
To keep accident records, identifying the areas to which prevention must be addressed

What we offer

Single Status
Accommodation (Meals) provided by the company
Transportation provided by the company
Round trip ticket on each rotation (Economy class)

Fulltime

Construction HSE Engineer

Construction HSE Engineer reports to the HSM or, while he/she is the TCM HSE rep...

Location

United Arab Emirates , Al Ruwais, Abu Dhabi

Salary:

Not provided

Met T&S

Expiration Date

Until further notice

Requirements

A Bachelor’s Degree in any Engineering Course
NEBOSH GC/IGC, Diploma in Safety or any other HSE Certification (considered at ADNOC Group discretion)
Additional HSE Trainings / Certifications will be added advantage
ADNOC approved will be an advantage
Minimum of 10 years work experience
Significant experience in a similar position on EPC Oil & Gas projects/ Refinery
Pipeline work is mandatory for this vacancy
In-depth knowledge of local and international food safety standards and regulations
Strong analytical skills and attention to detail
Excellent communication and interpersonal skills

Job Responsibility

To perform the job hazardous analysis (JHA) and participate to the Job Safety Analysis (JSA)
Verify the adequacy and application of the site HSE plan and all related procedures, to the preparing any revisions
To update the HSE documentation during all the construction phases when deemed necessary
To check that subcontractors perform their activities in accordance with all the HSE applicable procedures, regulation and standards, promoting all necessary action to ensure that the said procedures and regulations are observed
To organize, plan and participate to periodical HSE walk around, inspections and audits on site, prepare all the relevant reports, action plans, verify the follow up and the timely execution of the corrective action
To organize, coordinate and directly participate in the HSE training activities on site
To organize and participate to all relevant site HSE meetings, prepare the relevant MOM
To cooperate with the client concerning the issue of any necessary work permits
To organize in case of work accidents a full investigation of the event, finalized to the identification of corrective measure to avoid reoccurrence
To keep accident records, identifying the areas to which prevention must be addressed

What we offer

Single Status
Accommodation (Meals) provided by the company
Transportation provided by the company
Round trip ticket on each rotation (Economy class)

Fulltime

Construction HSE Engineer (PTW Coordinator)

Construction HSE Engineer- Permit to Work Coordinator verifies and ensures that ...

Location

United Arab Emirates , Al Ruwais, Abu Dhabi

Salary:

Not provided

Met T&S

Expiration Date

Until further notice

Requirements

Bachelor’s Degree preferably in Engineering or Science from a reputed University
Minimum 10 years’ experience in HSE in construction, fabrication, installation and/or commissioning projects / operations in the oil & gas or petrochemical industries
Relevant experience in 3 major EPC projects
oil & gas, petrochemical sector
NEBOSH GC/IGC. Diploma in Safety or any other HSE Certification (considered at ADNOC Group discretion)
Lead auditor ISO 45001/ ISO 14001 or equivalent. Incident Investigation technique
ADNOC approval will be an advantage
Additional HSE Trainings / Certifications will be added advantage
Have strong understanding of the HSE issues, practices and behavioural aspects in the Oil & Gas EPC business
Able to lead a team of HSE professionals such as HSE Engineers, Sr. HSE officers, HSE officers etc

Job Responsibility

Ensure that the “Permit to Work (PTW) Procedure” is followed, permits are distributed, opened and closed according to procedural requirements, ensuring that permits are correctly completed by the Issuing Authority and the Performing Authority, and finally archived
The WPC will be holder of the PTW Register. All Permits shall be registered daily before allowed their validity
When a PTW is closed or suspended the WPC must update the PTW Register accordingly
To perform the Job Hazardous Analysis (JHA) and participate to the Job Safety Analysis (JSA)
Verify the adequacy and application of the Site HSE Plan and all related procedures, to the preparing any revisions
To update the HSE documentation during all the construction phases when deemed necessary
To check that subcontractors perform their activities in accordance with all the HSE applicable procedures, regulation and standards, promoting all necessary action to ensure that the said procedures and regulations are observed
To organize, plan and participate to periodical HSE walk around, inspections and audits on site, prepare all the relevant reports, action plans, verify the follow up and the timely execution of the corrective action
To organize, coordinate and directly participate in the HSE Training activities on site
To organize and participate to all relevant site HSE Meetings, prepare the relevant MOM

What we offer

Single Status
Accommodation (Meals) provided by the company
Transportation provided by the company
Round trip ticket on each rotation (Economy class)

Fulltime

Construction HSE Engineer (LOTO Coordinator)

Report to the HSM or, while he / she is the TCM HSE representative at site, and ...

Location

United Arab Emirates , Al Ruwais, Abu Dhabi

Salary:

Not provided

Met T&S

Expiration Date

Until further notice

Requirements

A Bachelor’s Degree in any Engineering Course
Minimum 10 years’ experience in HSE in construction, fabrication, installation and/or commissioning projects / operations in the oil & gas or petrochemical industries focusing in LO-TO coordination
Relevant experience in 3 major EPC projects
oil & gas, petrochemical sector
Holding a NEBOSH GC/IGC certificate
Diploma in safety or any other HSE Certification (considered at ADNOC Group discretion)
ADNOC approval will be added advantage
Excellent communications and interpersonal skills
Attention to detail, management skills
Team-oriented skills, self-motivation and direction, with strong bias toward timely performance and problem resolution

Job Responsibility

Report to the HSM or, while he / she is the TCM HSE representative at site, and reports to the Site Manager
Verifies and ensures that all field activities are performed according to the TCM HSE policy, the regulations, standards and procedures, promoting all preventive and corrective action as required
To perform the job hazardous analysis (JHA) and participate to the job safety analysis (JSA)
Verify the adequacy and application of the site HSE plan and all related procedures, to the preparing any revisions
To update the HSE documentation during all the construction phases when deemed necessary
To check that subcontractors perform their activities in accordance with all the HSE applicable procedures, regulation and standards, promoting all necessary action to ensure that the said procedures and regulations are observed
To organize, plan and participate to periodical HSE walk around, inspections and audits on site, prepare all the relevant reports, action plans, verify the follow up and the timely execution of the corrective action
To organize, coordinate and directly participate in the HSE training activities on site
To organize and participate to all relevant site HSE meetings, prepare the relevant MOM
To cooperate with the client concerning the issue of any necessary work permits

What we offer

Single Status
Accommodation (Meals) provided by the company
Transportation provided by the company
Round trip ticket on each rotation (Economy class)

Fulltime

Senior Principal HSE Engineer (Technical Safety & Loss Prevention)

The Senior Principal HSE Engineer (Technical Safety & Loss Prevention) is tasked...

Location

United Arab Emirates , Dubai

Salary:

Not provided

McDermott

Expiration Date

Until further notice

Requirements

Bachelor’s Degree or Master’s Degree in Engineering
20+ years of experience in oil and gas of which preferably 15 years in offshore with major EPC contractors or consultants predominantly performing detail design
Preferably Registered Professional Engineer or member of professional engineering society as applicable
Detailed knowledge of safety studies, Loss prevention, design techniques and analysis methods especially for major large offshore projects
As a minimum good working knowledge on safety simulation tools such as PHAST, Flaresim, SAFETI, DETECT3 (preferable) and good understanding of CFD analysis
Knowledgeable in project coordination and execution skills
Recognized as having good communication and presentation skills
Demonstrated EPC Project Lead HSE Engineer experience

Job Responsibility

To be able to Lead Offshore large process intensive EPC Projects
Ensure timely delivery of deliverables with the required quality and within given schedule
Develop creative and innovative solutions that are reliable and cost-effective for problems and challenges when they arise
Apply expertise to the most complex problems
Review, and (as Lead Engineer) approve the following: Design HSE & fire protection philosophies, Safety study scope of work specifications, requisitions, TBE reports, Safety equipment lists, Firefighting equipment specifications and data sheets, Lifesaving and personnel safety equipment specifications and data sheets, Safety sign specifications and data sheets, Firewater demand and hydraulic calculation reports using PIPENET or equivalent software, Inputs to P&ID markups for Firewater ring main system and Deluge system including providing details of interconnection with hose reels, monitors, hydrants, and deluge valves /nozzles, Escape route and safety equipment layouts, Safety sign layouts, Third-party safety study reports that comply with project specifications
Participate and coordinate safety workshops (such as HAZID/HAZOP)
Review and approve safety study close-out reports
Review and approve FP&S and relevant other disciplines' vendor data
Review and approve technical notes on PFP rating requirements for the project based on Safety Study recommendations
Review and approve inputs for FP&S layouts, fire, and gas detection layouts, and cause and effect matrices

Fulltime

Sdc piping construction engineer

Location

Azerbaijan , Baku

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Basic knowledge of piping codes & standards: ASME B31.3 – process piping, API standards (esp. API 570, API 650, API 1104)
Knowledge of: Piping drawings, P&IDs, GA drawings
Piping support and stress considerations
Hydrotesting, flushing, torquing, welding and NTD coordination
Understanding of piping design, fabrication, erection, hydrotesting, walkdowns, ITR close out
Coordinating piping installation with structural/civil, mechanical and E&I teams
Ability to support pre-commissioning and commissioning activities and punch list clearance
Deep understanding of CLIENT Construction Defined Practice and the latest international standards that assure integrity of build and construction quality
Bachelor's degree in mechanical engineering, production engineering or industrial engineering
A high-level of communication and interpersonal skills

Job Responsibility

Deliver piping construction/installation across the SDC Topsides
Demonstrate excellent personal HSSE leadership and HSE behaviours
Lead, by example, with regards to company's HSE policy
Fulfil the role of SDC focal-point for piping construction/installation delivery
Actively participate in construction-related decisions
Collaborate with SDC Lead Piping Construction Engineer to provide a discipline perspective to schedules, design deliverables, materials purchases, degree of shop fabrication, material delivery configuration and sequence, as well as development of any required subcontracts
Interface with Design and Fabrication Contractors to ensure piping constructability input is being actively considered and implemented
Ensure effective piping material control and tracking, including identification of material shortages and management of surplus and rework
Develop and maintain all required project documentation for SDC Build-It-Tight and Build-It-Clean programs
Provide all necessary piping technical input to SDC Construction Execution Plan, Mechanical Completion Plan, Construction Work Package Plan (CWPP) and Construction Site Surveillance Plan

Fulltime

Construction HSE Coordinator

The HSE System Coordinator is responsible for ensuring the proper and complete o...

Location

Saudi Arabia , Jubail

Salary:

Not provided

Met T&S

Expiration Date

Until further notice

Requirements

University Degree/Diploma in Engineering
NEBOSH and IOSH certificates are mandatory. Significant experience in the industrial construction of large or XL gas plants exclusively with Saudi Based Clients
Covered a similar role in at least 4-5 projects of comparable size
A minimum of 15 years of relevant experience.

Job Responsibility

Maintain detailed knowledge of the corporate HSE System requirements
Verify the completeness and correctness of the content of HSE Plans
Process and send project-level and aggregate performance and operations indicators
Ensure compliance with local laws, international safety standards, and client-specific requirements
Assist in the investigation of safety incidents
Maintain up-to-date knowledge of developments in relevant international standards
Participate as a Lead Auditor and/or Auditor in system inspection activities
Collaborate with the Prevention and Protection Department to carry out activities that enhance the HSE system.

What we offer

Single Status
Accommodation (Meals) provided by the company
Transportation provided by the company
Round trip ticket on each rotation (Economy class).

Construction HSE Manager

HSE Manager is appointed for major projects and in case of consortium or ATI. He...

Location

Egypt

Salary:

Not provided

Met T&S

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in any Engineering Course
Minimum 10 years’ experience
Relevant experience in 3 major EPC projects
oil & gas, petrochemical sector
Holding a NEBOSH GC/IGC certificate is an advantage
Diploma in safety or any other HSE Certification

Job Responsibility

Support and monitor implementation of Tecnimont HSE policy and HSE management system at site
Perform Job Hazardous Analysis (JHA) and participate to Job Safety Analysis (JSA)
Verify adequacy and application of site HSE plan and procedures
Update HSE documentation during construction phases
Check subcontractors perform activities per HSE procedures and regulations
Organize, plan and participate to periodical HSE walk around, inspections and audits
Organize, coordinate HSE training activities on site
Organize and participate to site HSE meetings
Cooperate with client concerning work permits
Organize investigation of work accidents

Fulltime

Select Country

Construction HSE Engineer

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?

Construction HSE Engineer

Construction HSE Engineer

Construction HSE Engineer

Construction HSE Engineer (PTW Coordinator)

Construction HSE Engineer (LOTO Coordinator)

Senior Principal HSE Engineer (Technical Safety & Loss Prevention)

Sdc piping construction engineer

Construction HSE Coordinator

Construction HSE Manager

Our AI answers in your language