Configuration Management & CAD Standards Lead Job at Hermeus (Los Angeles)

New

Configuration Management & CAD Standards Lead

Hermeus is building a next-generation Product Lifecycle Management environment o...

Location

United States , Los Angeles, CA / Atlanta, GA

Salary:

142500.00 - 235750.00 USD / Year

Hermeus

Expiration Date

Until further notice

Requirements

Bachelors degree in Engineering, Computer Science or a related field. Equivalent work experience will be considered in lieu of a degree
5+ years with NX/Siemens Teamcenter, data structures and workflows
Deep understanding of configuration management principles
Deep knowledge of NX Modeling, drafting, assemblies, and standards
Ability to translate engineering intent into scalable rules
Experience locating, translating, and implementing regulatory and quality requirements as it pertains to CAD standards and best practices
Experience influencing/enforcing standards and mentoring engineers

Job Responsibility

CAD Standards & Best Practices (NX): Create, publish, and maintain enterprise-wide NX modeling, drafting, part definition, reuse library, and attribute standards
Define rules for modeling, WAVE links, assembly structure, and lightweight JT/PDF workflows
Partner with Engineering Mangers to align standards by Product
Continuously evaluate and improve standards to support future automation, workflows and drive towards model-based definition
Evolve standards as product complexity increases
Drive adoption through training
Configuration Management Governance: Own engineering release quality
Verify that released drawings define part attributes, BOM structure, units, trace attributes, make/buy preference, materials, and revision information
Ensure each release contains complete and correct Engineering Change Notice metadata
Uphold the existing part numbering, naming and lifecycle standards across releases

What we offer

100% employer-paid health care
401k & retirement plans
Unlimited PTO
Weekly paid office lunches
Fully stocked breakrooms
Stock options
Paid Parental Leave

Fulltime

Windchill Development Senior Technical Lead

Sopra Steria is seeking a Windchill Development Senior Technical Lead in Bengalu...

Location

India , Bengaluru

Salary:

Not provided

Sopra Steria

Expiration Date

Until further notice

Requirements

Experience in Windchill customization & implementation and configurations, reporting framework customization, workflow customization, customer handling
Good experience in Windchill PDMLink, MPM link, Parts Link or Client customization (server/client side)
Experience in various PDMLink Customizations like Action Framework Form Processors MVC Table builders Data Utility Listeners Validators Filters Business Rules Listeners
Experience in various Business Administration Configurations like Type and Attribute Management working with OIR s Lifecycle Template Administration Workflow Template Administration, Policy Administration, Participant Administration ,Preference Management, Analysis of Customer Requirements, Solution Design, Development for new enhancement requests, Build preparation for the developed requirements
Strong knowledge of CAD management, Document management, Parts Management and Change management
Experience on Windchill OData Rest Services
Knowledge on Windchill Change Management and related API s Knowledge on the Windchill API s
Strong knowledge in Java and Windchill API's
Hands on experience on working in Windchill
Should have good understanding of Windchill functionalities

Job Responsibility

Design, develop and maintain highly secure and scalable software
Participate in code reviews and other quality assurance activities to ensure the solutions meet the highest standards of quality
Provide technical leadership to junior team members
Document technical design, code, and other project artifacts as required
Work towards achieving 100% automation
Communicate effectively about the work done, rationale behind it and the impact on other parts of the product and trade-offs that have been made
Stay up to date with emerging trends and technologies relevant for Windchill

What we offer

Inclusive and respectful work environment
Open to people with disabilities

Fulltime

Engineering Drafter, Change Coordinator

This position is a dual-track role requiring a high-cadence technical expert (70...

Location

United States , Torrance

Salary:

39.00 - 50.00 USD / Hour

Intellisense Systems

Expiration Date

Until further notice

Requirements

Technical AS Degree in Drafting/Design or equivalent certification
5+ years of hands-on experience in a high-volume manufacturing environment, specifically in a "Lead" or "Senior" capacity
Capable of producing high quality manufacturing drawings that apply ASME standards e.g., Y14.5 using GD&T
Expert-level proficiency in SolidWorks and PDM Administration
Ability to utilize multiple word-processing and database applications including MS Office applications Word, Excel, Access, as well as Adobe Acrobat, etc.
Creativity, strong problem-solving and organizational skills, excellent technical writing, and verbal communication skills are essential
Proven "Closer" Mindset: Demonstrated ability to finalize drawing packages and drive them through the approval cycle to successful production release with zero-error output
High Detail Orientation: Advanced understanding of dimensioning, tolerancing (GD&T), and documentation for a variety of commodities
Must be capable of executing daily decisions and managing project timelines with very little supervision
U.S. Citizenship is required

Job Responsibility

Master-level preparation, or modification of complex CAD models and production design drawings (MIL STD level 2 & 3), BOMs and documents with MCAD (SolidWorks preferred) and MSOffice tools as needed per CM and drafting standards
Collaborate on 2D and 3D models, sketches, layouts, and assemblies with the engineering team
Take full ownership of the "Closing" phase: create process, status, and audit Change Orders (COs) to ensure they are consistent, compliant, and ready for production release
Drawings/ layouts that show the details for a wide variety of commodities
Create, input and extract part and bill of material (BOM) data from Engineering Drawings/SolidWorks PLM into and from various CM databases
Assist Configuration Management in organizing and maintaining product design and technical files for products in production needing sustainment
Create, process, status, and update engineering change requests (ECR’s), change orders (CO’s), and Configuration Items per CM procedures
Review and validate, with help from configuration manager and engineering, change orders for consistency
Review change items (drawing and documents) submitted on Change Orders for consistency with CM and corporate/Industry standard drafting styles
Review for consistency, with help from Configuration Manager, the Change Impact Analysis on COs and ECRs with engineering, planning and production staff

What we offer

4 Weeks PTO a year (including 40 hours of PTO your first day)
10 paid holidays
401(k) with 100% employer matching up to 4% of salary (no vesting period)
Multiple options for Medical, Vision, Dental Insurance plans
Health Savings Accounts
Flexible Spending Accounts
Tuition Assistance (30% of Tuition with a minimum qualifying grade)
100% Paid Employee Assistance Program (EAP)
100% Paid Basic Life and AD&D Insurance
100% Paid Workers Compensation Insurance

Fulltime

New

Engineering Drafter, Change Coordinator

This position is a dual-track role requiring a high-cadence technical expert (70...

Location

United States , Torrance

Salary:

39.00 - 50.00 USD / Hour

Intellisense Systems

Expiration Date

Until further notice

Requirements

Technical AS Degree in Drafting/Design or equivalent certification
3+ years of hands-on experience in a high-volume manufacturing environment, specifically in a "Lead" or "Senior" capacity
Capable of producing high quality manufacturing drawings that apply ASME standards e.g., Y14.5 using GD&T
Expert-level proficiency in SolidWorks and PDM Administration
Ability to utilize multiple word-processing and database applications including MS Office applications Word, Excel, Access, as well as Adobe Acrobat, etc.
Creativity, strong problem-solving and organizational skills, excellent technical writing, and verbal communication skills are essential
Proven "Closer" Mindset: Demonstrated ability to finalize drawing packages and drive them through the approval cycle to successful production release with zero-error output
High Detail Orientation: Advanced understanding of dimensioning, tolerancing (GD&T), and documentation for a variety of commodities
Must be capable of executing daily decisions and managing project timelines with very little supervision
U.S. Citizenship is required

Job Responsibility

Master-level preparation, or modification of complex CAD models and production design drawings (MIL STD level 2 & 3), BOMs and documents with MCAD (SolidWorks preferred) and MSOffice tools
Collaborate on 2D and 3D models, sketches, layouts, and assemblies with the engineering team
Take full ownership of the "Closing" phase: create process, status, and audit Change Orders (COs) to ensure they are consistent, compliant, and ready for production release
Create, input and extract part and bill of material (BOM) data from Engineering Drawings/SolidWorks PLM into and from various CM databases
Assist Configuration Management in organizing and maintaining product design and technical files for products in production needing sustainment
Create, process, status, and update engineering change requests (ECR’s), change orders (CO’s), and Configuration Items per CM procedures
Review and validate, with help from configuration manager and engineering, change orders for consistency
Review change items (drawing and documents) submitted on Change Orders for consistency with CM and corporate/Industry standard drafting styles
Review for consistency, with help from Configuration Manager, the Change Impact Analysis on COs and ECRs
May work with IT to facilitate PDM database management

What we offer

4 Weeks PTO a year (including 40 hours of PTO your first day)
10 paid holidays
401(k) with 100% employer matching up to 4% of salary (no vesting period)
Multiple options for Medical, Vision, Dental Insurance plans
Health Savings Accounts
Flexible Spending Accounts
Tuition Assistance (30% of Tuition with a minimum qualifying grade)
100% Paid Employee Assistance Program (EAP)
100% Paid Basic Life and AD&D Insurance
100% Paid Workers Compensation Insurance

Fulltime

Engineering Drafter, Change Coordinator

This position is a dual-track role requiring a high-cadence technical expert (70...

Location

United States , Torrance

Salary:

39.00 - 50.00 USD / Hour

Intellisense Systems

Expiration Date

Until further notice

Requirements

Technical AS Degree in Drafting/Design or equivalent certification
5+ years of hands-on experience in a high-volume manufacturing environment, specifically in a 'Lead' or 'Senior' capacity
Capable of producing high quality manufacturing drawings that apply ASME standards e.g., Y14.5 using GD&T
Expert-level proficiency in SolidWorks and PDM Administration
Ability to utilize multiple word-processing and database applications including MS Office applications Word, Excel, Access, as well as Adobe Acrobat, etc.
Creativity, strong problem-solving and organizational skills, excellent technical writing, and verbal communication skills are essential
Proven 'Closer' Mindset: Demonstrated ability to finalize drawing packages and drive them through the approval cycle to successful production release with zero-error output
High Detail Orientation: Advanced understanding of dimensioning, tolerancing (GD&T), and documentation for a variety of commodities including machined, sheet metal, and wire harness assemblies
Must be capable of executing daily decisions and managing project timelines with very little supervision
U.S. Citizenship is required

Job Responsibility

Master-level preparation, or modification of complex CAD models and production design drawings (MIL STD level 2 & 3), BOMs and documents with MCAD (SolidWorks preferred) and MSOffice tools as needed per CM and drafting standards including ASME Y14-100, Y14.5 (GD&T), Y14.24 ensuring 100% accuracy
Collaborate on 2D and 3D models, sketches, layouts, and assemblies with the engineering team
Take full ownership of the 'Closing' phase: create process, status, and audit Change Orders (COs) to ensure they are consistent, compliant, and ready for production release
Drawings/ layouts that show the details for a wide variety of commodities including machined parts, sheet metal, injection molded parts, laser cut parts, rapid prototype or 3D printed parts, wire harnesses and cable assemblies, mechanical tools and assemblies
Create, input and extract part and bill of material (BOM) data from Engineering Drawings/SolidWorks PLM into and from various CM databases including CM/PLM (QCBD), and ERP (Costpoint)
Assist Configuration Management in organizing and maintaining product design and technical files for products in production needing sustainment (all types
SolidWorks drawings, 3D models, Source control drawings, vendor item control drawings, tabulated drawings, etc.)
Create, process, status, and update engineering change requests (ECR’s), change orders (CO’s), and Configuration Items per CM procedures in support of engineering programs and quality management system (ISO9001: AS9100)
Review and validate, with help from configuration manager and engineering, change orders for consistency including change description, classification, and efficiency
Review change items (drawing and documents) submitted on Change Orders for consistency with CM and corporate/Industry standard drafting styles

What we offer

4 Weeks PTO a year (including 40 hours of PTO your first day)
10 paid holidays
401(k) with 100% employer matching up to 4% of salary (no vesting period)
Multiple options for Medical, Vision, Dental Insurance plans
Health Savings Accounts
Flexible Spending Accounts
Tuition Assistance (30% of Tuition with a minimum qualifying grade)
100% Paid Employee Assistance Program (EAP)
100% Paid Basic Life and AD&D Insurance
100% Paid Workers Compensation Insurance

Fulltime

IT Business Operations Systems Director

The Business Operations Systems Director is a senior leader responsible for driv...

Location

United Kingdom; India , Glasgow; Bangalore

Salary:

Not provided

Celeros Flow Technology

Expiration Date

Until further notice

Requirements

Bachelor’s degree in information technology, Engineering, or Business Administration (Master’s preferred)
15+ years of experience in ERP and manufacturing systems leadership roles
Extensive hands-on experience with SAP ECC 6.0 implementations and optimizations in ETO manufacturing
Track record of managing multi-site ERP deployments and manufacturing system integrations
Proven ability to lead cross-functional teams and influence senior stakeholders
Expertise in managing complex ERP projects with multiple workstreams
Deep experience across all relevant SAP ECC 6.0 modules for industrial/heavy manufacturing and ETO environments
Strong understanding of manufacturing processes, supply chain, and finance integration
Understanding of Trade and Export Compliance best practices and its implementation in ERP environments
Understanding of ERP ancillary systems such as invoice processing, trade compliance and tax management

Job Responsibility

Define and execute the ERP and manufacturing systems roadmap aligned with corporate objectives
Partner with Operations, Engineering, Supply Chain, and Finance to standardize processes and optimize system usage
Influence technology investments and digital transformation initiatives to support ETO manufacturing
Lead any integration or separations for the areas in scope to support M&A as needed
Oversee the day-to-day operational aspects of internal customer relationships with the Chief Operating Officer, the Chief Legal Counsel and the Chief Financial Officer
Establish and maintain effective system of communication between IT and each business function
Ensure the business is aware of Enterprise IT initiatives which are aligned with the global business strategy
Oversee implementation, upgrades, and optimization of SAP ECC 6.0 across all applicable modules
Ensure seamless integration between ERP and related systems
Oversee a team of 10 SAP professionals

Engineering Drafter, Change Coordinator

This position is a dual-track role requiring a high-cadence technical expert (70...

Location

United States , Torrance

Salary:

39.00 - 50.00 USD / Hour

Intellisense Systems

Expiration Date

Until further notice

Requirements

Technical AS Degree in Drafting/Design or equivalent certification
5+ years of hands-on experience in a high-volume manufacturing environment, specifically in a 'Lead' or 'Senior' capacity
Capable of producing high quality manufacturing drawings that apply ASME standards e.g., Y14.5 using GD&T
Expert-level proficiency in SolidWorks and PDM Administration
Ability to utilize multiple word-processing and database applications including MS Office applications Word, Excel, Access, as well as Adobe Acrobat, etc. (intermediate/advance skills a plus)
Creativity, strong problem-solving and organizational skills, excellent technical writing, and verbal communication skills are essential
Proven 'Closer' Mindset: Demonstrated ability to finalize drawing packages and drive them through the approval cycle to successful production release with zero-error output
High Detail Orientation: Advanced understanding of dimensioning, tolerancing (GD&T), and documentation for a variety of commodities including machined, sheet metal, and wire harness assemblies
Must be capable of executing daily decisions and managing project timelines with very little supervision
U.S. Citizenship is required

Job Responsibility

Master-level preparation, or modification of complex CAD models and production design drawings (MIL STD level 2 & 3), BOMs and documents with MCAD (SolidWorks preferred) and MSOffice tools as needed per CM and drafting standards including ASME Y14-100, Y14.5 (GD&T), Y14.24 ensuring 100% accuracy
Collaborate on 2D and 3D models, sketches, layouts, and assemblies with the engineering team
Take full ownership of the 'Closing' phase: create process, status, and audit Change Orders (COs) to ensure they are consistent, compliant, and ready for production release
Drawings/ layouts that show the details for a wide variety of commodities including machined parts, sheet metal, injection molded parts, laser cut parts, rapid prototype or 3D printed parts, wire harnesses and cable assemblies, mechanical tools and assemblies
Create, input and extract part and bill of material (BOM) data from Engineering Drawings/SolidWorks PLM into and from various CM databases including CM/PLM (QCBD), and ERP (Costpoint)
Assist Configuration Management in organizing and maintaining product design and technical files for products in production needing sustainment (all types
SolidWorks drawings, 3D models, Source control drawings, vendor item control drawings, tabulated drawings, etc.)
Create, process, status, and update engineering change requests (ECR’s), change orders (CO’s), and Configuration Items per CM procedures in support of engineering programs and quality management system (ISO9001: AS9100)
Review and validate, with help from configuration manager and engineering, change orders for consistency including change description, classification, and efficiency
Review change items (drawing and documents) submitted on Change Orders for consistency with CM and corporate/Industry standard drafting styles

What we offer

4 Weeks PTO a year (including 40 hours of PTO your first day)
10 paid holidays
401(k) with 100% employer matching up to 4% of salary (no vesting period)
Multiple options for Medical, Vision, Dental Insurance plans
Health Savings Accounts
Flexible Spending Accounts
Tuition Assistance (30% of Tuition with a minimum qualifying grade)
100% Paid Employee Assistance Program (EAP)
100% Paid Basic Life and AD&D Insurance
100% Paid Workers Compensation Insurance

Fulltime

New

Senior Manager - PLM Transformation

The Senior Manager, PLM Transformation will lead enterprise-wide initiatives to ...

Location

United States , Atlanta

Salary:

Not provided

NTT DATA

Expiration Date

Until further notice

Requirements

Deep, hands-on functional expertise across end-to-end PLM processes, including product structure management, document/CAD control, engineering change, configuration/variants, release management, and manufacturing handoff
Strong knowledge of BOM disciplines (EBOM/MBOM/SBOM where relevant), revision control, effectivity (date/unit/serial), and product configuration logic
Experience driving process standardization, governance, and cross-functional alignment across Engineering, Quality, and Manufacturing
Solution design experience across the product lifecycle
Standardize and harmonize PLM processes across business units/sites while enabling necessary local variation through controlled configuration
Demonstrated experience leading or owning functional workstreams for PTC Windchill implementations (new deployment, upgrade, consolidation, or re-architecture)
Strong understanding of Windchill functional configuration concepts: lifecycles, workflows, roles/ACLs, object types, attributes, classification, baselines, and change objects
Ability to facilitate Windchill fit-gap workshops and translate needs into implementable configurations
Lead end-to-end PTC Windchill implementation programs: discovery, fit-to-standard workshops, requirements, configuration/design, build oversight, test/UAT, cutover, and hyper care
Experience with Windchill integrations to ERP (SAP/Oracle), CAD tools, MES/QMS, and enterprise integration platforms (APIs, middleware)

Job Responsibility

Lead enterprise-wide initiatives to modernize and optimize end-to-end Product Lifecycle Management (PLM) capabilities, processes, and platforms
Partner with Engineering, R&D, Quality, Manufacturing, Supply Chain, Service, and IT to define the PLM roadmap, implement scalable solutions, and drive adoption and measurable outcomes

Configuration Management & CAD Standards Lead

Hermeus

Location:
United States , Los Angeles ▼
Atlanta

Category:
IT - Administration

Contract Type:
Not provided

Salary:

Requirements:

Additional Information:

Job Posted:
February 18, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Configuration Management & CAD Standards Lead

Configuration Management & CAD Standards Lead

Windchill Development Senior Technical Lead

Engineering Drafter, Change Coordinator

Engineering Drafter, Change Coordinator

Engineering Drafter, Change Coordinator

IT Business Operations Systems Director

Engineering Drafter, Change Coordinator

Senior Manager - PLM Transformation

Configuration Management & CAD Standards Lead

Hermeus

Location:United States , Los Angeles ▼Atlanta

Category:IT - Administration

Contract Type:Not provided

Salary:

Requirements:

Additional Information:

Job Posted:February 18, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Configuration Management & CAD Standards Lead

Configuration Management & CAD Standards Lead

Windchill Development Senior Technical Lead

Engineering Drafter, Change Coordinator

Engineering Drafter, Change Coordinator

Engineering Drafter, Change Coordinator

IT Business Operations Systems Director

Engineering Drafter, Change Coordinator

Senior Manager - PLM Transformation

Location:
United States , Los Angeles ▼
Atlanta

Category:
IT - Administration

Contract Type:
Not provided

Job Posted:
February 18, 2026