Compressor Operator Job at Airswift Sweden (Midland)

New

Control and Instrumentation Engineer

Work Experience (expected): Candidate must be associated with Gas/ Oil/ Coal bas...

Location

India , Vadodara

Salary:

Not provided

Larsen & Toubro

Expiration Date

December 13, 2026

Requirements

Candidate must be associated with Gas/ Oil/ Coal based Power Projects in the role of Basic & Detail Engineering
Knowledge of basic operations and design of Auxiliary Boiler, GTG, HRSG, STG, and steam-water cycle equipment is preferrable
Candidate should have sufficient knowledge in selection of various instruments per application requirement, preparing/ review of technical datasheets & specifications for instrument/ DCS/ PLC/ CEMS/ SWAS/ VMS, mechanical package systems like Boilers/ Gas Turbines/ Steam Turbines/ Water Treatment Plant/ MV or LV Pumps/ Air Compressors & Dryers

Fulltime

New

Plant Technician

The successful candidate will join the Facility Operations team to support the C...

Location

United States , Hampton

Salary:

34.69 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

U.S. Citizenship is required
Experience with any power generating equipment is a plus
Four (4) years of experience in operation, maintenance, and repair of like or typical equipment as utilized in high pressure air and gas compressor or other gas compressing/dispensing plant operations
Must have a general knowledge of mechanical systems
Experience in reading and identifying typical symbols on mechanical schematics/drawings
Experience in understanding and following written standard operating procedures and guidelines
Knowledge of OSHA Red Tag and equipment Lockout/Tagout standards, and plant/equipment maintenance and reliability is a plus
Failure to perform daily responsibilities and operate facility systems may effect or delay facility activities and overall schedule
Must be able to obtain and maintain a security clearance if required for this specific position
Must be able to work in a team atmosphere

Job Responsibility

Support of pre and post system operations for the Operations Facility
Perform minor and/or major maintenance on fluid and mechanical systems and ancillary equipment in a safe and efficient manner
Perform panel/automation operations associated with ejector, mixer, cooling system, silane, combustible air, and other fluids such as fuel, LOX, R134, LN2, hydraulic, high pressure air production and ancillary equipment with level 2 certified or above technician oversight
Will make regular rounds and take readings on all plant consumable, equipment, and sub-systems
Trouble-shoot system and component failures/anomalies with level 2 certified or above lead or senior plant technician
Use a variety of hand and power tools, facility software and electronic monitoring equipment
Maintain logs to record significant and/or historical events
Complete Safe Plan of Action forms, and Safety Observation Reports
Obtain and maintain minimal certification level on facility systems and panels and various lifting equipment, i.e., forklift, crane, and aerial lifts
Assist facility technician with the setup, installation, checkout, and teardown of the various sub-systems required for research operations

Fulltime

New

LuH72 Aircraft Mechanic I (A&P)

The LUH72 Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, ...

Location

United States , Fort Polk

Salary:

35.27 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

Valid FAA A&P Certification
Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work site.
Tools are Required, must provide own tools and toolbox. Tools must be shadowed and etched with PID.
Knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts
Thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers
Working knowledge of aircraft sub-systems, including maintenance parameters, systems operation, limitations, and technical orders

Job Responsibility

Troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems
Repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as drills
Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
Performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments
Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction
Work involves: replacing or repairing worn or damaged components, such as fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment
removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft
Adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes
Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair
Perform other qualified duties as assigned

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

New

HVAC Mechanic

Amentum, a global leader in critical mission support, engineering, technology, a...

Location

United States , Jacksonville

Salary:

36.71 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

High school graduate or equivalent
Must have at least one of the following: Graduate of an accredited technical school's diploma program in HVAC/R or three (3) years verifiable commercial work experience as a journey level HVAC/R mechanic or county, state, or city HVAC/R license
Must possess a valid state driver's license
Must possess CFC Refrigerant Universal Class A
Strong computer skills required for troubleshooting and correcting digital control software
Must be knowledgeable in the use of specialized tools used to perform necessary corrective and preventive maintenance and repairs
Must possess the standard tools of the trade
Must have and wear hard-toed safety shoes which meet ASTM F2413-05 standards
Successful candidate will be subject to a government security investigation and must continually meet eligibility requirements for access to all areas of Naval Submarine Base Kings Bay
Must be able to obtain and maintain facility credentials/authorization

Job Responsibility

Installs, services, and repairs environmental-control systems in residences, office buildings and other commercial/industrial settings, utilizing knowledge of refrigeration theory, pipefitting, and structural layout
Mounts compressor, condenser units and chiller units on platform or floor, using rigging, power and hand tools, following blueprints, or engineering specifications
Fabricates, assembles, and installs ductwork and chassis parts, using portable metalworking tools
Installs evaporator units in chassis or in air duct systems, using hand and power tools
Cuts and bends tubing to correct length and shape, using cutting and bending equipment and tools
Cuts and threads pipe, using machine-threading or hand-threading equipment
Joins tubing or pipes to various refrigerating units by means of sleeves, couplings, or unions, solder and brazed joints, using torch
Installs expansion and discharge valves in circuit
Electrically connects motors, compressors, temperature controls, humidity controls and circulating ventilation fans to control panels and connects control panels to power source
Installs air and water filters in completed installation

What we offer

Health & Welfare: $15.42 per hour contributed to benefits
401(k): Company matches up to 6% of employee contributions
Paid Time Off: Starts at 2.62 hours per pay period (136 hours annually), with increases based on tenure
Holidays: 12 paid holidays
Additional Leave: Includes bereavement and leave share programs
Shift Differential: Extra $1.75–$2.00/hour depending on shift start time
Hazard Pay: $3.00/hour for designated high-risk work areas
Lead Pay: Additional $2.25/hour for lead roles (temporary or permanent)
On-Call Pay: Two hours of overtime pay per day when on call during off-days/holidays
Safety Shoes: $175 annual allowance

Fulltime

New

HVAC/Refrigeration and Facilities Technician

The HVAC/Refrigeration and Facilities Technician will perform duties and tasks i...

Location

United States , Norcross

Salary:

Not provided

werfen

Expiration Date

Until further notice

Requirements

Associates Degree (AA) or equivalent from a two-year college or technical school and three years related experience and/or training
EPA, HVAC Certification
Minimum of three years of hands-on HVAC/Refrigeration experience with strong troubleshooting and repair skills in commercial/industrial systems
Experience working in GMP environments
Must be able to work overtime and weekends if needed to meet customer demands
Must be able to work closely and communicate with other departments
Proven experience in the maintenance and repair of equipment which includes Air Compressors, Steam Generators, Back-Up Generators, HVAC and Refrigeration Equipment, and DI water systems
Ability to read and interpret blue prints and schematics
Strong background in troubleshooting various electrical, refrigeration and HVAC systems
Proficient computer and technical systems skills

Job Responsibility

Technical expertise in Electrical/HVAC/Refrigeration, and utility systems
Strong background in diagnosing and repairing Electrical, HVAC, Refrigeration and Mechanical equipment
Will work with contractors involved with repairs or projects to ensure they are meeting Werfen’s expectations with regard to quality of workmanship, safety, etc.
Perform preventive maintenance and repair of all facility and utility equipment (this includes, but is not limited to Air Compressors, Steam Generators, Back-Up Generators, HVAC and Refrigeration Equipment, Security systems, Fire systems and DI water systems) in a timely manner
Complete daily work assignments from Facilities Manager
Perform preventive maintenance and repair of all Utility/facility-related items including the general upkeep of the facility
Ensure that the preventative maintenance program is performed in accordance with procedures, schedules and compliance regulations
Perform work in accordance to established maintenance departmental SOP’s/PM Task Lists
Ensure that documentation for maintenance actions taken is in compliance with departmental standard operating procedures
Communicate with department managers, supervisors and operators with regards to Facility / Utilities maintenance actions

Fulltime

New

Mechanical & Rotating Engineer

Airswift is seeking a Mechanical and Rotating Equipment Engineer (Onshore) to in...

Location

Brazil , Rio de Janeiro

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor's degree in Mechanical Engineering
Advanced English required
Experience in operation, maintenance, or reliability of rotating equipment in the Oil and Gas sector (offshore/onshore), focusing on centrifugal/reciprocating compressors, pumps, and turbomachinery
Solid knowledge of rotating equipment reliability, RCM, CBM, and PDM services
Hands-on experience in condition monitoring (vibration, oil analysis, thermography) and fault diagnosis
Proven experience in troubleshooting and field condition monitoring
Solid knowledge of API standards (e.g., 610/617/618/670/682/686), machine design, lubrication, mechanical seals (including dry gas seals), rotor dynamics, balancing, alignment, and modal analysis
Practical knowledge of international codes and standards (ASME, ANSI, ISO 10816/20816)
In-depth knowledge of rotating equipment: pumps, compressors, dry gas seal systems and gearboxes

Job Responsibility

Evaluate, respond to, and approve MOC/TA requests, technical changes, and deviations, ensuring compliance with company standards and applicable regulations (API/ASME/ISO/ABNT)
Issue Technical Notes and Guidelines as a recognized subject matter expert, standardizing practices and lessons learned
Ensure complete documentation, traceability, and clear communication with onshore/offshore stakeholders
Monitor the performance of rotating equipment using PDM/CBM techniques: vibration analysis, thermography, and oil analysis (including ferrography and spectroscopy) for early anomaly detection
Supervise and execute Product/Performance Data Monitoring (PDM) services, recommending corrective and preventive actions
Develop and implement condition-based maintenance (CBM) programs to optimize availability and reduce downtime
Develop and implement reliability and maintenance (RCM) strategies, with preventive/predictive plans to improve MTBF and lifecycle cost
Perform diagnostics on pumps, centrifugal/reciprocating compressors, gearboxes, and dry gas seal systems
recommend corrective actions
Identify and manage problematic components, conduct disposal plans, and prioritize investments to sustain reliability improvements

Shift Supervisor

The Shift Supervisor leads two or more full time employees in an assigned plant ...

Location

United States , Linden

Salary:

43.00 - 45.00 USD / Hour

Veolia

Expiration Date

Until further notice

Requirements

Degree in a related field (24 credits in Chemistry is a plus) or equivalent experience
Five to seven years in various positions within a water / wastewater treatment or chemical processing environment with knowledge of methods, principles and practices of operating, maintaining and repairing plant equipment, instrumentation and associated systems
Lead experience or supervisory training required with understanding of human relations, training, performance evaluation and health and safety

Job Responsibility

Perform job duties in a safe manner compliant with policies, procedures and practices
Model professional behavior
report to work as scheduled, on time and prepared to work
Work flexible schedule that may include nights, weekends and holidays
Conduct laboratory analytical testing as needed for product quality assurance/ control
and routine tests
Operate, maintain, install and repair equipment including pumps, blowers, compressors, centrifuges, valves, mixers, chemical feed, and odor control systems
Monitor local control panels, adjusts valves and gates
Monitor flow meters, gauges, flow ratios, tank levels, pressures, temperatures and related controls through instrument panels, computer terminals and programmable logic control units in assigned areas
Monitor and document operating conditions/observations and data in shift log daily

What we offer

Paid time off
Health insurance
Dental insurance
Vision insurance
Life insurance
Savings accounts
Tuition reimbursement
Paid volunteering
Employer sponsored 401(k) plan
Sick leave - 56 hours

Fulltime

FS - Facility Coordinator

The Facility Coordinator is responsible for overseeing the general upkeep, safet...

Location

United States of America , Baytown

Salary:

Not provided

Cactus Wellhead LLC

Expiration Date

Until further notice

Requirements

Three (3) years of experience in facility coordination or management in a manufacturing or industrial environment
Experience with CMMS platform (eMaint preferred)
High School Diploma or GED required
Strong organization, communication, and problem-solving skills
Basic understanding of building systems and facility operations
Pre-employment drug screening
Background checks
Medical examinations
Safety certifications
Valid driver's license

Job Responsibility

Proactively support all Employee Health and Safety (EH&S) procedures and policies
Coordinate facility maintenance and repairs, including HVAC, lighting, air compressors plumbing, cranes, water treatment, chillers, camera systems, fire emergency systems and other building infrastructure
Schedule and oversee work performed by external contractors and service providers
Manage facility inspections, compliance checks, and regulatory documentation
Support planning and execution of facility upgrades, renovations, and shutdowns
Maintain records of facility assets, warranties, and service agreements
Respond to facility-related emergencies and coordinate corrective actions
Communicate facility status, issues, and improvement opportunities to the Maintenance Manager and team
Other duties as assigned

Fulltime

Select Country

Compressor Operator

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?