Commissioning Instrument Assistant Job at Met T&S (Ruwais)

Commissioning Electrical Assistant

CEA executes the activities pertaining to his discipline in compliance with the ...

Location

United Arab Emirates , Al Ruwais

Salary:

Not provided

Met T&S

Expiration Date

Until further notice

Requirements

A bachelor’s degree or diploma in Electrical Engineering
Minimum of 3 to 5 year's work experience
Significant experience in in a similar position on EPC Oil & Gas projects/ Refinery
Experience in on-site pre-commissioning / commissioning of electrical systems and equipment
Excellent communications and interpersonal skills
Attention to detail, management skills
Team-oriented skills, self-motivation, and direction, with strong bias toward timely performance and problem resolution

Job Responsibility

Implement pre-commissioning and commissioning procedures for electrical equipment
Execute activities with the assigned crew from the Subcontractor within the discipline
Ensure effective utilization of commissioning manpower and consumables
Execute Vendor’s specialists field activities in accordance with the Vendor’s representative plan
Perform checklists as per supervisor instructions
Prepare forms for all tests, ensuring submission of certificates signed by involved parties for final handover to the certification engineer (QA/QC)
Ensure proper safety procedures during cable tests (megger, induction test), motor and transformer tests, relay tests, and electrical panel tests
Serve as an authorized person designated by the site manager to receive or issue permits
Work according to the project Permit to Work Procedure
Assistance the supervisor in

What we offer

Competitive salary package with benefits

New

Mechanical Lead And Maintenance

You will provide direction and assistance to work group to meet assigned objecti...

Location

Japan , 千葉

Salary:

8500000.00 - 15000000.00 JPY / Year

Randstad

Expiration Date

Until further notice

Requirements

Electrical engineering bachelor’s or master’s degree from an accredited university or college
Solid understanding of Power Electronics, Electric Circuit, Electric Power Systems, Medium Voltage, Harmonics, with good hands-on skill
Experience with Programmable Logic Controllers
Good literacy in at least one computer programming language
Hands-on experience and knowledge of test instruments (recorders, power analysers, oscilloscopes, Insulation resistance, HI pot etc.)
Comfortable to sail on marine vessels if needed and remain offshore for defined number of days
Willing to travel including distant in-country or aboard limited duration visits and with short notice in advance
Good understanding of Health and Safety, and risks / Hazards involved

Job Responsibility

Pre-commission, commission, and service static frequency converters (SFC) and variable frequency (VFD) low voltage and medium voltage drives/switchgear/transformers and power systems
Provide technical assistance and supervision to customers on the installations
Conduct on-site interpretation of data and technical instruction
Provide management with complete and prompt information and report regarding safety & project/service status, customer or equipment problems, and failures
Provide technical assistance through on-site guidance and training in proper operation, maintenance, and troubleshooting of assigned programs and ground support equipment
Provide and assist quality team with root cause analysis and generate reports in case of equipment malfunction or failures to identify/analyse any undesirable trends
Complete site documentations such as weekly safety update, installations check lists, pre-commissioning, and commissioning procedures
Hands-on on-site parts replacement, testing, and verification of electrical equipment
Adhere with company Health and Safety policies and work in safe and best practice manner to ensure the wellbeing of personnel and equipment are not compromised
Able to interface at upper management and peers levels of the organization both internally and externally in clear and methodical manner

What we offer

健康保険
厚生年金保険
雇用保険
土曜日
日曜日
祝日
賞与年1回

Fulltime

New

Assistant Project Manager

Location

India , Maharashtra

Salary:

Not provided

Unilever

Expiration Date

Until further notice

Requirements

B.E or B.Tech in Mechanical/ Instrumentation/ Electrical with 3-5 Years of Experience in Supply Chain, Project Execution, Engineering
Working knowledge on construction safety, Commissioning of Equipments & monitoring and controlling leading & lagging indicators of safety
Driving Safety in execution on day to day activities. PTW, MOS, THA, SAM, HI etc.
To conduct in-detailed Project scope study with Factory team to understand their Project needs to execute as per Project Network
Experience in Packaging machines and Automated Ware Houses, ASRS is desirable
Experience in Commissioning of Equipment’s, Tanks, Vessels, Machineries, Piping, Steel structures
To take complete ownership of the project and keep the track of the application project blueprint, responsible for efficient project management
Provide technical support to Factories and manage stake holders
Knowledge & Hands on experience on Project Management and Contractor Management (Mechanical)
Experience on Vendor Management, BOM preparation, Installation and Commissioning at Site and Troubleshooting

Fulltime

New

Ob medical assistant

As our Medical Assistant, you'll keep the day running smoothly and efficiently f...

Location

United States , Omaha

Salary:

18.06 - 25.51 USD / Hour

American Nursing Care

Expiration Date

September 20, 2026

Requirements

Graduate of a medical assisting program accredited by the Accrediting Bureau of Health Education Schools (ABHES) or Commission on Accreditation of Allied Health Education (CAAHEP)
Successfully completed Medication Aide 40-hour course or current/valid
Basic Life Support (BLS) from the American Heart Association

Job Responsibility

Performs general patient care following established clinic workflows
Greets and prepares patients for the health care provider by obtaining and recording vital signs, reviewing drug allergies and current medications, completing applicable screening questionnaires and documenting reason for visit
Collects and prepares ordered specimens for laboratory analysis
Prepares and provides ordered medications and/or vaccines to patients
Cleans and sterilizes instruments
Ensures patient exam rooms are stocked, clean, and orderly

What we offer

Sign On Bonus
medical
prescription drug
dental
vision plans
life insurance
paid time off
tuition reimbursement
retirement plan benefit(s) including, but not limited to, 401(k), 403(b), and other defined benefits offerings

Fulltime

Junior Process Engineer

about the company Junior Process Engineering roles for clients in O&G, Water Tre...

Location

Malaysia , Kuala Lumpur

Salary:

Not provided

Randstad

Expiration Date

July 16, 2026

Requirements

Bachelor's degree in Chemical/Process/Oil & Gas Engineering
0–3 years of process design experience, ideally within an EPC or consultancy environment
Fresh graduates are encouraged to apply (CGPA > 3.0)
Familiarity with process simulation software, AutoCAD, and understanding of industry codes (e.g., API, ASME, or local water standards)
Open to work in Kajang or Kuala Lumpur

Job Responsibility

Assist senior engineers in developing design deliverables, performing calculations, and drafting process diagrams, serving as a foundational role for building multidisciplinary engineering skills
Process Design: Assist in developing Process Flow Diagrams (PFDs), Piping & Instrumentation Diagrams (P&IDs), and block diagrams
Calculations & Sizing: Perform preliminary hydraulic calculations, mass balances, and equipment sizing for pumps, vessels, and treatment units
Documentation: Prepare technical datasheets, process design bases, and operation manuals
Project Execution: Interface with mechanical, piping, and instrumentation disciplines to integrate system designs
Site Support: Assist with plant walk-downs, testing, and pre-commissioning/commissioning activities under senior guidance

Fulltime

Project Engineer III

Project Engineer III is an opportunity to support instrumentation and controls w...

Location

United States , Sabine Pass

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Degree in engineering / technology and 12+ years of industry experience
Project engineering experience at operating facility on small capital and expense projects with demonstrated ability to handle multiple projects simultaneously
Experience managing project budgets and schedules within acceptable tolerances
Knowledge of equipment specification and procurement processes
General knowledge of multiple areas below with expertise in at least one: Field Instrumentation and Controls
Actuated Valve Design and Operations
Distributed Control Systems, Safety Systems, and PLCs for packaged equipment
Smart Plant Instrumentation Tool
Wireless Technology and Devices
HMI Graphics Development and Deployment

Job Responsibility

Support project management activities including routine project updating and forecasting, cost controlling, schedule adherence, change management, documentation, and closeout
Work with project or opportunity owners to define and develop project scope, goals, and deliverables through the staged gate project management system
Develop project cost and schedule estimates based on vendor information and market conditions, and prepare funding requests
Assemble specifications, procedures, scope of work, and other required documentation into bid packages
Work with procurement to coordinate bid evaluation, review, and award
Communicate with outside equipment and material vendors to specify requirements, obtain quotes, and follow up on purchases of equipment and services
Steward, plan, and oversee contractors, costs, progress against schedule, and scope of work
Assist and coordinate drawing and document reviews, RFIs, change proposal requests, and change orders, and incorporate changes into project documents
Coordinate interfaces between contractors and Golden Pass functions including Engineering Organization, Operations, Maintenance, and Turnaround Planning Team
Interface with Maintenance planners to schedule site activities for maintenance projects

Interventional Technologist

As an Interventional Technologist, you will prepare and assist physicians during...

Location

United States , Lincoln

Salary:

30.76 - 45.76 USD / Hour

American Nursing Care

Expiration Date

Until further notice

Requirements

Graduate of a Radiologic Technology Program
BLS from the American Heart Association
ARRT Board Certified in Radiology
Must hold a valid Medical Radiography or General Radiology Technologist Permit to Practice license in Nebraska or Iowa depending on work state
Understands methods and is capable of performing venipuncture’s as required for position
Demonstrated ability to set and maintain multiple priorities in an environment with shifting priorities, while providing accurate deliverables in a timely fashion
Must be self-motivated, and able to take ownership of projects/assignments
Must be a team player with excellent follow-up and customer service skills
Strong interpersonal, verbal, and writing skills
Interpersonal skills in dealing with guests and team members

Job Responsibility

Prepare and assist physicians during complex interventional procedures, ensuring optimal imaging and patient safety
Ready the procedure room, operate advanced imaging equipment, monitor patient vitals, and assist with instruments while maintaining sterile fields
Proper assessment of the patient and their abilities to participate in ordered procedure
Provide a clear explanation of the procedure including duration, process, and what to expect following completion
Verify informed consent for and assist physician with interventional procedures
needle localization, aspiration, biopsies, and other invasive procedures
Practice aseptic and sterile techniques as necessary and observe universal precautions
Provide patient education as appropriate
Select proper equipment, set correct technical factors, procedure protocols and gather proper supplies prior to performance of the procedure
Recognize all radiation safety standards including 'Image Gently' and 'Image Wisely' and MR safety standards

What we offer

Medical
Prescription drug
Dental
Vision plans
Life insurance
Paid time off (full-time benefit eligible team members may receive a minimum of 14 paid time off days, including holidays annually)
Tuition reimbursement
Retirement plan benefit(s) including, but not limited to, 401(k), 403(b), and other defined benefits offerings

Fulltime

Van Pnm Product Development

Mercedes-Benz Research and Development, India is seeking System responsible engi...

Location

India , Bangalore

Salary:

Not provided

Mercedes-Benz AG

Expiration Date

Until further notice

Requirements

Has strong automotive domain knowledge - especially in automotive electronics
Is self-motivated and able to mentor/guide a team of engineers
Has strong inter-personal skills with good communication
Has good experience working with global teams and has a good understanding of OEM/Tier-1 development models
Has proven ability of problem-solving and is able to motivate the team towards problem solving
Has good understanding of the development processes in the automotive OEMs/ Tier-1s
Good understanding of Automotive – Body electronics/Powertrain/Safety systems, ECU (Electronic Control units), SW architecture and ECU functional testing
Can appreciate and embody core values, integrity, and professionalism in day-to-day operations
Has worked in development of ECUs/Electronic components with medium complexity (like Cluster ECU, Seat control ECU, Immobilizer, keyless Entry)
B.E/M. Tech (full-time) from reputed institutions with specialization in Electrical & Electronics / Electronics & Communication / Mechatronics / Instrumentation

Job Responsibility

Development and series support for EE components for Mercedes Benz Vans which fulfil the legal regulations and production demands, the objectives from the project, Carline, and module strategy, regarding function, quality, weight, and costs
Coordination of change requests for changes in components
Monitoring the component-FMEA of the supplier
Provision and management of sample (including delivery of vehicle, board, S-HIL, C-HIL, …)
Plants logistics: Coordinating ordering for plants after blank-release
Assistance in the creation and release of a test and commissioning regulation (PIV) for the components
Organize and participate in test drive (winter/summer)
Participation in SW release and testing on vehicle and providing confirmation
Ensure certification for the vehicle coding data

What we offer

Mitarbeiterrabatte möglich
Gesundheitsmaßnahmen
Mitarbeiterhandy möglich
Essenszulagen
Betriebliche Altersversorgung
Hybrides Arbeiten möglich
Mobilitätsangebote
Mitarbeiter Events
Coaching
Flexible Arbeitszeit möglich

Fulltime

Select Country

Commissioning Instrument Assistant

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?