Commissioning Engineer III Job at Merrick & Company (Chamblee)

New

Controls Engineer III – Robotic Arm

As a Controls Engineer – Robotics, you will own the full lifecycle engineering o...

Location

United States , Mendon

Salary:

110000.00 - 130000.00 USD / Year

Autonomous Solutions

Expiration Date

Until further notice

Requirements

Bachelor's degree in Robotics, Mechatronics, Mechanical Engineering, Electrical Engineering, or related field
5+ years of hands-on experience in robotic systems integration, with demonstrated end-to-end ownership - from concept and design through commissioning and field support
Strong experience with FANUC programming (TP/KAREL), system configuration, and integration
Meaningful, hands-on experience with vision systems (2D and/or 3D) - not just academic exposure. Must be able to configure, calibrate, troubleshoot, and adapt vision systems in real-world deployments
Proven ability to design or collaborate on custom EOAT and mechanical interface solutions
Demonstrated experience working across hardware/software boundaries, including sensors, PLCs, and system interfaces
Strong troubleshooting skills across mechanical, electrical, and software domains
Ability to operate independently in fast-paced, ambiguous, field-deployed environments
Strong communication and collaboration skills across cross-functional teams

Job Responsibility

Own end-to-end integration of FANUC robotic arm systems - from system architecture and motion planning through field deployment and ongoing optimization
Lead vision system integration and problem-solving, with particular focus on adapting 2D/3D vision to outdoor, variable-lighting environments including direct sun, glare, shadow, and low-light conditions
Partner with mechanical and electrical teams to design, iterate, and validate end-of-arm tooling (EOAT) and interface mechanisms - including custom tooling solutions for novel connection challenges
Develop robust motion strategies, error handling, and recovery routines capable of performing reliably in real-world, uncontrolled conditions
Troubleshoot complex field issues across mechanical, electrical, and software domains using structured root cause analysis
Collaborate with third-party vision system vendors and integrate their solutions into ASI's robotics platform
Drive testing, validation, and performance benchmarking against reliability, safety, and uptime requirements
Support on-site deployments and work directly with operations teams to ensure sustained system performance
Mentor junior engineers and provide technical leadership within the robotics team
Contribute to engineering standards, documentation, and continuous improvement processes

Fulltime

Network Engineer III

Zachary Piper Solutions is seeking a Network Engineer III to support a global le...

Location

United States , Chantilly

Salary:

104240.00 USD / Year

Piper Companies

Expiration Date

Until further notice

Requirements

5+ years of experience in network engineering or IT infrastructure roles
Strong understanding of networking concepts, protocols, and architecture
Experience with network design, implementation, and troubleshooting in enterprise environments
Hands-on experience with network hardware and platforms (e.g., Cisco, Juniper, Palo Alto, etc.)
Experience with network analysis and troubleshooting tools (Wireshark, CLI, etc.)
Familiarity with ITIL concepts and system lifecycle methodologies
Strong communication and collaboration skills, with the ability to work across technical teams
Bachelor’s degree in Engineering, Computer Science, IT, or related fields

Job Responsibility

Design, configure, and maintain network infrastructure, services, and devices across enterprise environments
Support the integration of security systems (intrusion detection, access control, video, and command systems) into network environments
Collaborate with engineering teams to develop network architectures and system designs
Assist in the creation of design documentation, specifications, and network schematics
Perform system testing, commissioning, and validation of deployed network solutions
Troubleshoot and resolve complex network and connectivity issues
Support preventative maintenance, including system upgrades, patches, and performance improvements
Develop and maintain documentation, procedures, and test plans
Monitor network performance and ensure alignment with SLA requirements and operational needs
Work with project managers and stakeholders to ensure projects are delivered on time and within scope

What we offer

Medical
Dental
Vision
401(k)
Paid Time Off
Holidays

Fulltime

Senior Controls Design Engineer III

As a Controls Design Engineer with strong PLC control system expertise, you will...

Location

United States , Lewis Center

Salary:

Not provided

ATS Automation Tooling Systems Inc.

Expiration Date

Until further notice

Requirements

Post-secondary degree or diploma in mechanical, electrical, systems, or computer engineering is preferred
6+ years of experience in engineering design, development, programming and commissioning automated systems, custom machinery or industrial equipment
Thorough understanding and hands-on experience with PLCs, robotics control systems and machine operation
Strong PLC programming, mechanical and electrical problem solving skills
Effective communication skills both verbally and in writing with the ability to work either independently and part of a team in fast-paced environments

Job Responsibility

Design and develop software programs (PLC and/or PC based) specific to customer and project requirements based on standard ATS programming methods
Debug and commission control systems at our facility and on-site at customer locations
Select, test and integrate hardware and software components such as robots, analog devices, motion controllers, sensors, vision systems, dispense systems and lasers
Work with other members of the control systems design department and other groups to continuously improve methods of integrating controls technology, with the goals being enhanced safety, enhanced functionality and reduced cost
Work with other members of the control systems design department and other groups to ensure that labor and material budgets as well as scheduled delivery dates are adhered to or improved upon
Work with customers, project managers, designers, toolmakers and electricians to solve problems in order to provide the customer with a complete, functional automation system
Provide thorough testing of machine functionality to verify software program completeness
Provide accurate documentation for each project
Advise customer on solving technical problems
Follow and contribute to quality program (ex. ISO / NQA) procedures

What we offer

Flexible work schedules
employee events
free coffee beverages
employee referral program
safety shoe programs
Overtime pay eligibility
paid vacation
company paid short- and long-term disability and life insurance
comprehensive health benefits
401K matching program

Fulltime

Electrical Engineer III

The Senior Engineer oversees the design of expansion and maintenance capital pro...

Location

Canada , Edmonton

Salary:

Not provided

Randstad

Expiration Date

June 13, 2026

Requirements

8+ years progressive experience in Engineering system design and commissioning activities within Oil and Gas Industry
Bachelor's degree in Engineering or equivalent from an accredited university or college
Professional Engineer designation
Aptitude and communications skills related to acting independently as a professional engineer
Proven planning, organizational, problem solving, decision – making and negotiating skills, supplemented with a practical aptitude.

Job Responsibility

Own and manage the relationship and contracts with Engineering services providers
Lead the design review process with internal and external stakeholders ensuring regulatory requirements, code and Enbridge's specifications, standards and procedures are followed including Process Hazard operability and constructability perspective
Manage the specification and requisition of materials by reviewing vendor materials quotations, evaluate technical bid evaluations and provide recommendation based on technical merit along with price and delivery
Collaborate with Supply Chain to procure material via internal tools
Provide planning and scheduling for design and procurement phases of the project
Provide technical support during all project phases, including project development, construction, and commissioning
Manage engineering firms to incorporate red-line markups into as-built drawings for all projects
Supports the development of the project scope, schedule, capital cost estimate, execution planning, risks and supporting information related to assigned facility projects during the project development phase
Support Operations with any incident investigations after project handover
Reviews lessons learned from past projects and incorporates recommendations into future designs

Fulltime

!

Project Engineer III

Electrical Engineer/Project Manager. Location: Salem, SC. Bad Creek Hydro. Contr...

Location

United States , Salem

Salary:

52.00 - 55.00 USD / Hour

Lorien

Expiration Date

Until further notice

Requirements

Minimum of 11 years of project management experience
Graduation from a four-year college or university
Expert in project management principles
Expertise to Strong Expertise in Project Management, Decision Making, Critical Thinking, and Problem Solving
Project related work experience
Risk Management
Leadership
Employee Management/Development
Oversight
PE license

Job Responsibility

Day to day activities will include scoping generator rewinds and replacements, complete electrical life extensions for hydro stations
This role will be fully accountable for the scoping, planning, design, procurement, implementation, and commissioning of electrical projects ranging from $5M - $100M
Provides engineering/technical expertise and guidance in the identification, analysis and resolution of routine problems in area of expertise
Assists in the accomplishment of business goals and objectives through effective planning, organizing, estimating, scheduling and monitoring of work activities under the guidance of higher-level employees
Prepares thorough and accurate technical reports, correspondence, documentation, calculations and sketches associated with the resolution of routine technical problems
Partner with Project Managers to define technical needs for capital projects
Troubleshooting and scoping work across the PM portfolio
Identify issues and outline what needs to be repaired or upgraded
Work concurrently with up to 15 Project Managers

What we offer

Health
Dental
Vision

Fulltime

Life Sciences Mechanical Engineer III

Merrick and Company is seeking Mechanical Engineer / Designer to support the mec...

Location

United States , Greenwood Village, Colorado

Salary:

108000.00 - 138000.00 USD / Year

Merrick & Company

Expiration Date

Until further notice

Requirements

A minimum of eight (8) years related experience
Bachelor’s degree in Mechanical Engineering from an ABET-Accredited program
Licensure as a Professional Engineer in Colorado or another U.S. jurisdiction is preferred (or a plan to obtain licensure within two years)
Experience in aspects of mechanical building design including planning, calculations, equipment selection, schematic design, production of construction documents, and construction administration
Proficiency in the use of REVIT and AutoCAD
Proficiency in report writing including basis of design reports, specifications, field reports, etc.
Good verbal and writing skills and ability to interact effectively with clients and other employees
Strong oral presentation skills
Ability to demonstrate effective problem solving skills applying mechanical design principals
Ability to travel and must possess a current passport

Job Responsibility

Participate as part of the mechanical design team and the multi-disciplinary project team
Execute the detailed mechanical, plumbing/process and controls design of complex mechanical facilities including life science and nuclear facilities
Perform detailed engineering calculations
Produce detailed 3D models and construction drawings
Write specifications and reports as required
Perform site inspection, testing, and commissioning of equipment and facilities as required
Utilize excellent verbal and written communication skills to interact effectively with clients and other employees
Develop and maintain expert level knowledge of applicable codes and standards for the design and construction of nuclear and biocontainment facilities in Canada and internationally
Develop and maintain expert level skills in required software packages including REVIT
Execute all work in accordance with Merrick and project specific Quality Assurance procedures

What we offer

Employee Owned - all eligible U.S. employees have an Employee Stock Ownership Account
Robust Employee Referral Program
Annual performance and compensation reviews
Professional Training and Development
Employee Recognition Awards
Peer Mentor Program
Health insurance
Dental and vision coverage
401(k)
Paid time off (PTO)

Fulltime

Validation Engineer III

The Validation Engineer III performs an array of well-defined validation activit...

Location

United States , Bedford

Salary:

Not provided

PCI Pharma Services

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Engineering or related scientific discipline required with a minimum of 6 years of Pharmaceutical industry experience or combination of work experience in Validation, QA, MFG, or Engineering
Experience in pharmaceutical or biopharmaceutical environment in operations/engineering/manufacturing/quality environments
Combination of equipment qualification, process validation, or cleaning validation is acceptable
QA pharmaceutical experience also preferred
Validation experience with the following is highly preferred: Thermal characterization, Vacuum physics, Heat and mass transfer, Formulation, Aseptic Filling and Lyophilization, Steam Sterilization
Experience in multiple regulatory inspections and knowledgeable in current industry standards and regulatory trends as they pertain to Validation of pharmaceutical or biopharmaceutical processes

Job Responsibility

Author validation plans
assist with the development of specifications for user requirements, functional requirements, and design requirements, trace matrices, validation summary reports and test protocols for installation, operation, performance of equipment, functional requirements, risk assessments, and IQ/OQ/PQ
Review commissioning, qualification and validation related system lifecycle documentation (user requirements, functional and design specifications, commissioning and qualification protocols)
Assist with direction on equipment/process change control development (equipment, utilities, facilities, and processes) used to develop and manufacture products in a cGMP environment
Work closely with other validation department personnel as well as cross-functionally with Manufacturing, Engineering, Critical Utilities, Quality Assurance, and project management to achieve all project deliverables
Assist management with mentoring and training of colleagues on policies and procedures including the requirements for validation
Validation representative on validation projects leading by example on projects
Develop and recommend science-based solutions with a focus on continuous improvement and compliance
Perform risk assessment and mitigation steps to achieve attainment and maintenance of a validated state of compliance for all equipment, utilities, processes, materials, and facilities
Coordinate and execute validation protocol activities with consistent and effective communication with affected departments

Fulltime

Control Systems Engineer III

The Control Systems Engineer III will lead the design and execution of moderatel...

Location

United States , Camas, WA

Salary:

110000.00 - 140000.00 USD / Year

Sigma Design

Expiration Date

Until further notice

Requirements

Bachelor's Degree in Mechatronics, Mechanical Engineering or Electrical Engineering required
Minimum of 7+ years experience integrating complex mechanical-electrical systems
Programming PLCs, safety PLCs, motion controllers, and HMIs (Allen Bradley, Siemens, Yaskawa, Kollmorgen, Beckhoff, IFM, etc.)
Sizing/selecting circuit protectors, wiring, cables, sensors, controllers, system I/O, drives and motors, etc.
Integrating and programming vision systems (Cognex, Keyence, iRVision, etc.), robots (ABB, Fanuc, Yaskawa, Omron, etc.), and other devices for custom-designed equipment or a work cell
Proficiency in CAD software (AutoCAD, SolidWorks, AutoCAD Electric, EPlan)
Great understanding of closed loop control, instrumentation, controls systems, enclosure design, safety codes and regulations (UL 508A, NFPA79, UL61010, etc.)
Demonstrated track record of working as part of a cross-functional team to deliver results with exceptional quality, in addition to being on time, on budget and meeting the needs of the customer
Strong written and verbal English language communication skills
Excellent teamwork/interpersonal skills and the ability to communicate effectively

Job Responsibility

Architect, design/develop and implement custom controls and vision systems solutions
Program, network, commission, analyze, diagnose, and debug control systems with a wide variety of hardware: PLCs, microprocessors, motion controllers, HMIs, robots, servo drives, VFDs, servos, steppers, and/or inductions motors, vision systems, and all types of sensors
Specify control components and support creation of the BOM
Design control systems to the UL508A, UL61010, and NFPA 79 regularity standards
Support creation of electrical wiring and cable diagrams
Support the Lab during the electrical enclosure builds
Assist in writing and reviewing system specification documents
Support the creation of operations manuals
Test/Validation, perform FAT, SAT, and onsite training
Follow Business Technology policies to protect sensitive data and reduce information security occurrences

What we offer

401(k) with up to 4% company match
quarterly bonus program
15-days of accrued PTO
9 company paid holidays
multiple options for medical insurance
dental insurance
voluntary benefits: vision, long-term disability, and life insurance

Fulltime

Select Country

Commissioning Engineer III

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?