Commissioning Engineer III Job at Merrick & Company (Chamblee)

Project Engineer III

We are seeking an experienced Civil Engineer specializing in water treatment pro...

Location

United States , Columbus

Salary:

Not provided

Wessler Engineering

Expiration Date

Until further notice

Requirements

A minimum of 4 years of experience in water treatment engineering and design
Bachelor of Science Degree in Civil Engineering from an ABET accredited institution
Professional Engineer (PE) license preferred or the ability to obtain within 12 months
Team-oriented with good communication and organizational skills
Strong analytical and problem-solving skills with a focus on technical innovation
Ability to successfully complete tasks independently with guidance from managers
Proficiency in industry-standard computer software for engineering analysis and design (e.g., AutoCAD, Water CAD, etc.)

Job Responsibility

Develop, evaluate, and design water treatment systems, including conceptual planning, detailed engineering, and process optimization
Conduct hydraulic and process modeling to ensure the efficiency and reliability of treatment systems
Collaborate with multidisciplinary teams to integrate treatment systems with broader infrastructure projects
Provide technical expertise and guidance during the construction and commissioning of water treatment facilities
Analyze system performance, troubleshoot issues, and propose solutions for operational improvements
Stay updated on emerging technologies and advancements in water treatment processes
Prepare technical reports, specifications, and proposals
Participate in site visits to evaluate facilities and processes, meet with operations staff, and collect system information useful for evaluation and design
Ensure compliance with local, state, and federal regulations

Control Systems Engineer III

The Control Systems Engineer III will lead the design and execution of moderatel...

Location

United States , Camas, WA

Salary:

110000.00 - 140000.00 USD / Year

Sigma Design

Expiration Date

Until further notice

Requirements

Bachelor's Degree in Mechatronics, Mechanical Engineering or Electrical Engineering required
Minimum of 7+ years experience integrating complex mechanical-electrical systems
Programming PLCs, safety PLCs, motion controllers, and HMIs (Allen Bradley, Siemens, Yaskawa, Kollmorgen, Beckhoff, IFM, etc.)
Sizing/selecting circuit protectors, wiring, cables, sensors, controllers, system I/O, drives and motors, etc.
Integrating and programming vision systems (Cognex, Keyence, iRVision, etc.), robots (ABB, Fanuc, Yaskawa, Omron, etc.), and other devices for custom-designed equipment or a work cell
Proficiency in CAD software (AutoCAD, SolidWorks, AutoCAD Electric, EPlan)
Great understanding of closed loop control, instrumentation, controls systems, enclosure design, safety codes and regulations (UL 508A, NFPA79, UL61010, etc.)
Demonstrated track record of working as part of a cross-functional team to deliver results with exceptional quality, in addition to being on time, on budget and meeting the needs of the customer
Strong written and verbal English language communication skills
Excellent teamwork/interpersonal skills and the ability to communicate effectively

Job Responsibility

Architect, design/develop and implement custom controls and vision systems solutions
Program, network, commission, analyze, diagnose, and debug control systems with a wide variety of hardware: PLCs, microprocessors, motion controllers, HMIs, robots, servo drives, VFDs, servos, steppers, and/or inductions motors, vision systems, and all types of sensors
Specify control components and support creation of the BOM
Design control systems to the UL508A, UL61010, and NFPA 79 regularity standards
Support creation of electrical wiring and cable diagrams
Support the Lab during the electrical enclosure builds
Assist in writing and reviewing system specification documents
Support the creation of operations manuals
Test/Validation, perform FAT, SAT, and onsite training
Follow Business Technology policies to protect sensitive data and reduce information security occurrences

What we offer

401(k) with up to 4% company match
quarterly bonus program
15-days of accrued PTO
9 company paid holidays
multiple options for medical insurance
dental insurance
voluntary benefits: vision, long-term disability, and life insurance

Fulltime

Commissioning Engineer III

Merrick is seeking a Commissioning Engineer III to become part of our growing Co...

Location

United States , Chamblee

Salary:

108000.00 - 132000.00 USD / Year

Merrick & Company

Expiration Date

Until further notice

Requirements

A Bachelor’s Degree in Engineering OR a (2) Year Technical Associates Degree from an accredited institution with practical commissioning, controls, or testing experience
Ability to manage and lead a technical team
Must have a minimum eight (8) years or more experience in the commissioning of these systems: HVAC (air and hydronic), controls, plumbing, laboratory equipment fire protection, security, and/or electrical systems
Demonstrated Project Management experience
The client projects for this position require U.S. Citizenship
Must have a valid driver's license, a good driving record, and be insurable under Merrick’s insurance carrier
Frequent travel to project/client locations is required with possible international travel

Job Responsibility

Coordinate, perform and oversee detailed field commissioning services, assessments, and studies for all types of facilities/systems including the following: laboratories, nuclear spaces, hospitals, clean rooms
Generate commissioning plans
write commissioning specifications
develop commissioning installation checklists and functional test procedures
verify and validate commissioned systems controls and equipment
document commissioning process, develop final commissioning report, and develop systems manuals

What we offer

Employee Owned - all eligible U.S. employees have an Employee Stock Ownership Account
Robust Employee Referral Program
Annual performance and compensation reviews
Professional Training and Development
Employee Recognition Awards
Peer Mentor Program
health insurance, dental and vision coverage, 401(k), and paid time off (PTO)

Fulltime

New

Principal Process Engineer III

The Principal Process Engineer III provides process engineering support to the I...

Location

United States , Houston

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

A Bachelor of Science degree in Process / Chemical Engineering or a relevant Engineering discipline
15+ years’ industry-related experience, with a minimum of 10 years supporting the production of oil & gas facilities
Strong technical knowledge of separation, dehydration, and compression is required
Knowledge of flow assurance risks associated with offshore deepwater production facilities
Experience with process & hydraulic simulation tools (e.g., Aspentech HYSYS)
Detailed expertise in Process Safety
Experience with relevant process safety risk assessments and functional safety tools
Experience in Incident Response (or willing to participate)
Professional Engineer / Chartered Engineer status preferred
Working knowledge of API codes affecting process design (e.g., API RP 14C, 14E, 520, 521)

Job Responsibility

Provide technical leadership in process engineering across topsides equipment, subsea flowline, and onshore storage and off-take equipment to the operations and maintenance teams
Foster effective relationships with both office and site-based teams
Subsea flowline and topsides equipment process engineering support to Operations
Develop process solutions to ensure safe and reliable operations, which may include additional new or temporary equipment
Lead or participate as a member of Root Cause Analysis (RCA) teams as required
Manage the design, detailed engineering, and work management planning of facilities process modifications using an MOC process
Participate in HAZOPs, HAZIDs, LOPAs, other risk assessments, and Design Reviews
Provides governance and oversight to ensure engineering practices are carried out in accordance with the required technical standards, processes, and procedures while operating in compliance with local regulations and corporate standards
Own and continually improve the process surveillance tools and KPIs across the operated facilities
Provision of technical expertise and direction in “Case to Operate” scenarios related to process engineering

New

Process Engineer III

Airswift is looking for a Process Engineer III to support one of our major O&G c...

Location

United States , Kansas City

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

BS/MS degree in Chemical Engineering or equivalent is required
Experience with process simulation software, such as Aspen Hysys or ProSim
Familiarity with process safety requirements in Oil and Gas industry
Problem solving and leadership skills with proven ability to manage contractor process team
Experience in petroleum refining/chemical process industry with an engineering contractor serving these industries
Capital project development experience
Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
Proficient in Microsoft Office suite

Job Responsibility

Conduct FEED studies for the design stages of carbon capture projects, as well as support the EPC stage
Oversee a team of process engineers to implement various project deliverables such as P&IDs, PFDs and HMBs
Monitor and lead junior engineers in the development of process design specifications, including the development of heat & material balances, design flow plans, process equipment design, preliminary hydraulic balances, utility balances, basic process control & instrumentation, materials selection, safety facilities
Lead and/or perform process optimization studies to identify / evaluate capital / operating cost savings, process configuration alternatives, safety facilities requirements, etc.
Provide technical oversight for engineering contractor's work during front end engineering & design / detailed engineering to ensure consistency with Company methods & guidelines, project specifications & owner's requirements
Participate in Hazard & Operability Reviews for new / modified facilities / in support of existing plant facilities
Provide commissioning & start-up assistance for new / modified facilities, as required
Establish organization and staffing process

Fulltime

New

Pharmacist

This is an exciting opportunity for a Pharmacist to join our fast-paced, growing...

Location

Australia , Charlestown

Salary:

Not provided

Chemist Warehouse

Expiration Date

Until further notice

Requirements

Qualified Pharmacist with a valid AHPRA registration
Experience working in dispensing medications within a community pharmacy environment
Exceptional customer service and communication skills
Excellent verbal and written communication skills
Commercially-astute with business acumen experience and attention-to-detail skills
Collaborative and coaching leadership capabilities, with demonstrated interpersonal and organisational skills

Job Responsibility

Accurately and efficiently dispensing of prescriptions using MyScripts
Day-to-day management of store, dispensary and team operations
Dispensary inventory management and order processing
Professional patient counselling and providing complete patient care solutions
Providing supervision to Interns, Student Pharmacists and Dispensary Assistants
Supporting and developing new business strategies in pharmacy best-practice

What we offer

Ongoing training and support to grow your career
Positive team culture with great perks like staff discounts, recognition, and regular celebrations
Confidential Employee Assistance Program (EAP)
Flexible rosters help you balance work and life
Service recognition and end-of-year awards

Fulltime

New

Barista - Cafe Supervisor

The primary objective of this role is to provide effective leadership and ensure...

Location

United Kingdom , London

Salary:

15.90 GBP / Hour

Baxter Storey

Expiration Date

Until further notice

Requirements

Experience and passion in hospitality, retail, or food service
Amazing teamwork skills and an ability to drive excellent communication
Flexibility to work on a rota based schedule
Strong customer service focus with a positive attitude and professional presentation
Experience in Front-of-house (FOH) operations, including food service and stock control
A positive can-do attitude and a desire to improve and win every day
Excellent organisational and problem-solving skills, especially during peak times
Ability to work collaboratively with both front and back-of-house teams
Ability to adapt to challenges and opportunities with a solution-oriented perspective
Work accordingly to the BaxterStorey Core Values

Job Responsibility

Implementing and rigorously enforcing BaxterStorey's strategic vision encompassing People, Product, Customers, Environment, and Profitability
Ensuring the consistent delivery of superior customer service through a professional, efficient, and meticulous approach
Providing authoritative and decisive leadership to the team, including task allocation, performance management, and continuous evaluation
Supporting the Manager in critical daily operational activities and assuming full managerial responsibilities in their absence
Coordinating effectively with Front of House (FOH) team to guarantee product excellence, optimal inventory management, and stringent stock control
Rigorously maintaining and enforcing the highest standards of food safety, occupational health and safety, and professional presentation

What we offer

28 Days holiday including bank holidays
Plus your birthday off
3 volunteering days
3 days grandparent leave
24 week’s enhanced maternity leave
Secondary career leave
Wedding/commitment day leave
Free meals on shift
Bespoke training and development opportunities
Apprenticeships opportunities for all experience levels

Fulltime

New

Manufacturing Engineer

The Sr. Engineering Specialist (Manufacturing Engineer) ensures that our end pro...

Location

United States , Joplin

Salary:

Not provided

Owens Corning

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Engineering or related field
2-4 Years of experience in a manufacturing environment
Experience with Total Productive Maintenance methodology and implementation and/or Lean certification preferred
1-2 Years of experience in coordinating and managing tasks with hourly technicians is preferred
Ability to organize and lead multi-functional teams to achieve plant objectives
Strong listening and comprehension skills
Ability to lead Continuous Improvement/ Focused Improvement projects as desired
Strong verbal and written communication skills to effectively communicate to all levels of the organization
Strong analytical skillset
Business and Financial acumen to understand the drivers of success and how they interact

Job Responsibility

Adhere to all plant and position-specific safety policies, procedures, and standards
Develop and implement procedures and systems to ensure products consistently meet or exceed customer expectations
Support process and product development trials
Maintain master files and history on all specifications and procedures
Identify opportunities for process improvement resulting in increased productivity, improved product quality, and reduced process variability
Analyze product and process data, providing feedback and making recommendations to optimize performance
Monitor and maintain all process-related programs to control product specifications and set points
Implement best practices for process setup, maintenance, and process control
Perform spot-checks and routine audits related to the production process and quality testing
Provide technical support to Operations, Maintenance and Leadership, as well as all customers

Fulltime

Commissioning Engineer III

Merrick & Company

Location:
United States , Chamblee

Category:
-

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 15, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Commissioning Engineer III

Project Engineer III

Control Systems Engineer III

Commissioning Engineer III

Principal Process Engineer III

Process Engineer III

Pharmacist

Barista - Cafe Supervisor

Manufacturing Engineer

Commissioning Engineer III

Merrick & Company

Location:United States , Chamblee

Category:-

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 15, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Commissioning Engineer III

Project Engineer III

Control Systems Engineer III

Commissioning Engineer III

Principal Process Engineer III

Process Engineer III

Pharmacist

Barista - Cafe Supervisor

Manufacturing Engineer

Location:
United States , Chamblee

Category:
-

Contract Type:
Not provided

Job Posted:
January 15, 2026