CrawlJobs Logo
Merrick & Company Logo Merrick & Company · IT - Software Development

Commissioning Engineer I

United States, Manhattan Employment contract 70000.00 - 88000.00 USD / Year · Job Posted May 14, 2026
Apply Position
Job Link Share

Job Description

Merrick is seeking a Commissioning Engineer II to become part of our growing Commissioning team. Basic office hours are 7:00 am CST to 4:00 pm CST, Monday thru Friday and is a hybrid schedule. Occasional overtime could be needed with short notice. Salary range for this position is $70,000.00 - $88,000.00. Base pay offered may vary depending on job-related knowledge, skills, and experience. This position will ideally be a full-time, onsite position located at our client site in Manhattan, KS. If remote, weekly travel to project/client site is required.

Job Responsibility

  • Coordinate, perform and oversee detailed field commissioning services, assessments, and studies for all types of facilities/systems including the following: laboratories, nuclear spaces, hospitals, clean rooms
  • Generate commissioning plans
  • write commissioning specifications
  • develop commissioning installation checklists and functional test procedures
  • verify and validate commissioned systems controls and equipment
  • document commissioning process, develop final commissioning report, and develop systems manuals

Requirements

  • A Bachelor’s Degree in Engineering OR a (2) Year Technical Associates Degree from an accredited institution with practical commissioning, controls, or testing experience
  • Must have a minimum of zero (0) to four (4) years or more experience in the commissioning of these systems: HVAC (air and hydronic), controls, plumbing
  • Demonstrated Project Management experience
  • The client projects for this position require U.S. Citizenship
  • Must have a valid driver's license, a good driving record, and be insurable under Merrick’s insurance carrier
  • Weekly travel to project/client locations is required

Nice to have

  • Experience in the commissioning of bio-containment laboratory facilities (BSL3, BSL3Ag, BSL4)
  • Experience in the commissioning of these systems: laboratory equipment, fire protection, security, and/or electrical systems
  • Experience in commissioning of other types of high-tech, mission-critical facilities
  • Experience with HVAC controls systems and protocols (e.g. JCI, Siemens, ALC, BACnet, Modbus, etc)
  • Experience with construction administration
  • LEED/Green Globes/Guiding Principles Compliance
  • PE, CCP, BCxP, CxA, LEED AP

What we offer

  • Employee Owned - all eligible U.S. employees have an Employee Stock Ownership Account
  • Robust Employee Referral Program
  • Annual performance and compensation reviews
  • Professional Training and Development
  • Employee Recognition Awards
  • Peer Mentor Program
  • health insurance
  • dental and vision coverage
  • 401(k)
  • paid time off (PTO)
Merrick & Company - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Commissioning Engineer I

8 matching positions

Commissioning Engineer I

Merrick is seeking a Commissioning Engineer II to become part of our growing Com...
Location
Location
United States , Manhattan
Salary
Salary:
70000.00 - 88000.00 USD / Year
merrick.com Logo
Merrick & Company
Expiration Date
July 10, 2026
Flip Icon
Requirements
Requirements
  • A Bachelor’s Degree in Engineering OR a (2) Year Technical Associates Degree from an accredited institution with practical commissioning, controls, or testing experience.
  • Must have a minimum of zero (0) to four (4) years or more experience in the commissioning of these systems: HVAC (air and hydronic), controls, plumbing.
  • Demonstrated Project Management experience.
  • The client projects for this position require U.S. Citizenship.
  • Must have a valid driver's license, a good driving record, and be insurable under Merrick’s insurance carrier.
  • Weekly travel to project/client locations is required.
Job Responsibility
Job Responsibility
  • Coordinate, perform and oversee detailed field commissioning services, assessments, and studies for all types of facilities/systems including the following: laboratories, nuclear spaces, hospitals, clean rooms.
  • Generate commissioning plans
  • write commissioning specifications
  • develop commissioning installation checklists and functional test procedures
  • verify and validate commissioned systems controls and equipment
  • document commissioning process, develop final commissioning report, and develop systems manuals.
What we offer
What we offer
  • Employee Ownership – All eligible U.S. employees participate in our Employee Stock Ownership Plan (ESOP), sharing in the company’s success.
  • Comprehensive Compensation & Benefits – Merrick & Company offers a competitive compensation and benefits package including health insurance, dental and vision coverage, and paid time off (PTO).
  • Robust Referral Program – Earn incentives for referring top talent to join our team.
  • Performance Reviews – Annual reviews to recognize contributions and support career growth.
  • Professional Development – Access to ongoing training and development opportunities to build your skills and advance your career.
  • Employee Recognition – Formal programs to celebrate achievements and outstanding performance.
  • Peer Mentor Program – Get support and guidance through structured mentorship opportunities.
  • And More – Additional programs and benefits designed to support your success and well-being.
  • Fulltime
Read More
Arrow Right

EC&I Commissioning Engineer

We are looking for EC&I Commissioning Engineers to be based on Sellafield site o...
Location
Location
United Kingdom , Sellafield, Cumbria
Salary
Salary:
Not provided
morson.com Logo
Morson Talent
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Nuclear CE&I systems commissioning
  • Minimum - HNC/HND in Engineering related subject
  • Experience in nuclear commissioning
  • Project management knowledge, preferably APM member
  • Calculation production using Excel
  • IOSH Managing Safely
  • SMSTS or SSSTS
  • ECS supervisory card relevant to trade
  • Microsoft Suite
Job Responsibility
Job Responsibility
  • To carry out vendor testing witnessing duties at works test
  • Preparation of plant commissioning test specifications
  • Early inspection of site installation to facilitate system handovers
  • Execution of testing activities throughout IPC commissioning phase
  • Identification of faults and ability to propose and implement solutions
  • Organisation of Commissioning Technicians and support resources
  • Initiation and implementation of FOBs
  • Validation of Working Level Instructions
  • Application and removal of Temporary Commissioning Aids
  • Fulltime
Read More
Arrow Right

Electrical Commissioning Engineer I

Responsible for providing engineering and technical support to plan, schedule, c...
Location
Location
United States , Mclean
Salary
Salary:
Not provided
bureauveritas.cz Logo
Bureau Veritas Certification CZ, s.r.o.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals
  • Ability to write routine reports and correspondence
  • Ability to speak effectively before groups of customers or employees of organization
  • Math Ability: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume
  • Ability to apply concepts of basic algebra and geometry
  • Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form
  • Ability to deal with problems involving several concrete variables in standardized situations
  • Computer Skills: To perform this job successfully, an individual should have knowledge of Deltek and Microsoft Office 365
  • Education/Experience: Pertinent and/or relevent industry experience
  • and/or one to two years related experience and/or training
Job Responsibility
Job Responsibility
  • Assists in the development of commissioning plans
  • Assists in engineering design reviews
  • Interprets design and specification under direct supervision
  • Works in conjunction with senior engineers to fully understand scope and design as well as resolve issues, when necessary
  • Reviews shop drawings and submittals under direct supervision
  • Develops MEP test procedures under direct supervision
  • Develops MEP operating procedures under direct supervision
  • Provides input in the development of site specific load bank plans
  • Provides input in the development of commissioning schedules
  • Witnesses and/or performs the static and dynamic testing of MEP Systems, whilst under direct supervision, with examples that include chiller plants, air handling equipment, pumps, UPS systems, switchgear, and ATS switches
  • Fulltime
Read More
Arrow Right

Commissioning Engineer - I&C

Location
Location
United Arab Emirates , Abu Dhabi
Salary
Salary:
Not provided
lobelia.earth Logo
Lobellia
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 5-10 Years
  • ADNOC & GCC Experience Mandatory
  • Bachelor's Degree in Instrumentation / Electrical / Electronic Engineering
  • Strong experience in EPC/EPCM commissioning projects
  • Hands-on experience with control systems (DCS/PLC/SCADA/ESD)
  • Familiarity with completion management systems (ICAPS, WINPCS, etc.)
  • Vendor coordination experience for control systems and instrumentation packages
Job Responsibility
Job Responsibility
  • Execute pre-commissioning and commissioning activities for l&C systems
  • Perform loop checking, calibration, and functional testing of field instruments and control systems
  • Commission DCS, PLC, SCADA, and ESD systems in coordination with vendors and engineering teams
  • Review and validate P&IDs, control philosophies, logic diagrams, and cause & effect charts
  • Ensure readiness of instrumentation systems for start-up and handover
  • Manage and close punch lists (A/B/C) related to l&C scope
  • Prepare and verify commissioning procedures, method statements, and test reports
  • Coordinate with construction, QA/QC, electrical, and process teams for system completion
  • Ensure compliance with client standards (e.g., ADNOC), international codes, and project specifications
  • Maintain accurate commissioning documentation and progress reports
  • Fulltime
Read More
Arrow Right

C&I Commissioning Engineer

Airswift require a CampI Commissioning Engineer for the below offshore trips - 3...
Location
Location
United Kingdom , Aberdeen
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Experience in Field delivery of Completions & Commissioning. Demonstrable Track record in leading successful Completions & Commissioning of major projects and or brownfield modification.Existing ‘right to work’ in the UK is mandatory.Actively promotes and supports implementation of project safety culture, practices and procedures.Experienced Commissioning and Completions with proven track record of successful delivery on brownfield modifications and capital projects.Experience and understanding of various Completions Management Systems.Experience of working in various locations.A network of high-level key client contacts and ability to enhance customer relationships.Motivational leadership style with very strong communication skills and ability to develop a high-performance culture.Good reporting and analytical skills, able to interrogate project Metrics and identify issues and blockers.Preferably E, C & I background
Job Responsibility
Job Responsibility
  • Governance and oversite for a portfolio of Projects within a contract with the ability to influence successful Completions amp Commissioning
  • Identify key projects where inclusion of Commissioning and Completions can bring value to project execution and drive project delivery in line with the Worley BM of lsquoright to left-thinking’
  • Develop standardisation of Commissioning and Completions processes across Projects utilising Worley Company tools SMART Completions and in line with Advanced Work Packing methodology
  • Ensure that Commissioning is embedded in the Value Creation framework
  • Convey a clear message that Worley can deliver Commissioning Execution through early engagement with projects at bid and Pre-FEED/FEED stage
  • Identify areas of the Commissioning and Completions processes that can be expedited through collaboration with Global Digital Initiatives teams to constantly improve the lsquoway we work’ and maintain lsquobest in class’ standard approach
  • Conduct audits of all existing projects and contracts to confirm Commissioning and Completions are bringing maximum value to Worley and are operating efficiently
  • Conduct reviews to ensure customers are informed of Worley Commissioning and Completions services and benefits
  • Develop strong customer relationships and participation in customer meetings ensuring continuous improvement in the space of Commissioning amp Completions
Read More
Arrow Right

Electrical Commissioning Engineer I

Responsible for providing engineering and technical support to plan, schedule, c...
Location
Location
United States , Mclean
Salary
Salary:
Not provided
bureauveritas.cz Logo
Bureau Veritas Certification CZ, s.r.o.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Pertinent and/or relevent industry experience
  • one to two years related experience and/or training
  • or equivalent combination of education and experience
  • Valid Driver’s License
  • Ability to obtain CPR and/or basic First Aid
  • Ability to obtain OSHA 10
  • Ability to obtain NFPA70E
  • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals
  • Ability to write routine reports and correspondence
  • Ability to speak effectively before groups
Job Responsibility
Job Responsibility
  • Assists in the development of commissioning plans
  • Assists in engineering design reviews
  • Interprets design and specification under direct supervision
  • Works in conjunction with senior engineers to fully understand scope and design as well as resolve issues
  • Reviews shop drawings and submittals under direct supervision
  • Develops MEP test procedures under direct supervision
  • Develops MEP operating procedures under direct supervision
  • Provides input in the development of site specific load bank plans
  • Provides input in the development of commissioning schedules
  • Witnesses and/or performs the static and dynamic testing of MEP Systems
  • Fulltime
Read More
Arrow Right
New

Sr SAS Commissioning Engineer

We are looking for a Senior SAS Commissioning Engineer to join our strong profes...
Location
Location
Norway , Stavanger
Salary
Salary:
Not provided
akersolutions.com Logo
Aker Solutions
Expiration Date
August 09, 2026
Flip Icon
Requirements
Requirements
  • Relevant MSc, BSc and/or certificate of apprenticeship
  • Solid SCD, C&E and block hierarchy knowledge
  • Be able to work in team and see other disciplines needs and dependencies
  • Performance-oriented, good cooperative skills responsibility, ability to drive and coordinate work processes
  • Language Skills: Norwegian and English
  • Must have valid Offshore certification
  • Good knowledge of working procedures in all disciplines
Job Responsibility
Job Responsibility
  • Participation on FAT for SAS package, extended testing between different package suppliers (eFAT) and commissioning offshore may be required
  • Act as a SAS Commissioning engineer responsible for Safety system (PSD, ESD, F&G) and PCS
  • Prepare documentation for offshore control systems
  • Follow-up of suppliers and subcontractors Mechanical Completion, preservation and final delivery
  • Attend and verify Factory Acceptance Test at suppliers' location when required Develop and maintain system boundary drawings in accordance with the project's Completion Strategy
  • Prepare and maintain the project Completion system
  • Plan, prepare and execute Commissioning & Start-up on a multi-disciplinary level
  • Prepare for, and take responsibility of final handover to Customer
What we offer
What we offer
  • Solid pension and insurance coverage
  • Well-being: Enjoy access to free fitness facilities, sports groups and equipment rental, and a variety of cabins for rent
  • Vibrant Young Professional network: Connect, grow and thrive in our international community, Young Solutioneers
  • Fulltime
Read More
Arrow Right
New

Process Engineer I

As a Process Engineer at Baxter Healthcare Corporation, you will play a pivotal ...
Location
Location
United States , Cleveland
Salary
Salary:
76000.00 - 95000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in Engineering (Mechanical, Industrial, Electrical, or Computer Engineering preferred) or equivalent experience
  • A minimum of 2 years in Engineering or Manufacturing is required
  • experience in FDA manufacturing is helpful
  • Preferred experience with automation controls, automated assembly, control systems, PLCs, HMIs, servos, and vision inspection systems
  • Proficiency in software used to build models (e.g., AutoCAD, SolidWorks) is preferred
  • Six Sigma Master Black Belt Certification or industry-standard equivalent is preferred
  • Experience in plastic injection molding is advantageous
  • Project Management skills and experience, including familiarity with Microsoft Project, are a plus
  • Experience and skills in Lean Manufacturing are helpful
Job Responsibility
Job Responsibility
  • Build and modify precision assembly and/or manufacturing equipment
  • Manage multiple projects with minimal supervision
  • Prepare accurate estimates for various tasks and projects
  • Coordinate capital projects, directly and through coordinating engineers
  • Drive continuous improvement activities across the department
  • Collaborate with plant and corporate groups, contractors, and vendors
  • Coordinate the initiation, troubleshooting, and commissioning phases for new manufacturing processes
  • Manage equipment life cycle processes such as upgrades, replacement, and decommissioning
  • Perform product life cycle management tasks, including build changes, material changes, Supplier Notice of Change (SNC) assessments, and specification changes
  • Provide technical support and troubleshooting to all plant departments
What we offer
What we offer
  • Medical and dental coverage that starts on day one
  • Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
  • Employee Stock Purchase Plan (ESPP)
  • 401(k) Retirement Savings Plan (RSP)
  • Flexible Spending Accounts
  • Educational assistance programs
  • Paid holidays
  • Paid time off ranging from 20 to 35 days based on length of service
  • Family and medical leaves of absence
  • Paid parental leave
  • Fulltime
Read More
Arrow Right