Coatings Inspector Job at Erdman Anthony (Binghamton)

NACE Coating Inspector - CIP 1

The successful candidate will conduct various aspects of quality control and ins...

Location

United States , Fairmont

Salary:

Not provided

MEC Construction LLC

Expiration Date

Until further notice

Requirements

Five years of experience of above ground plotless painting systems
Two years of direct field experience inspecting coating and painting inspection
Ability to read and interpret construction project drawings and specifications
Five years of experience executing above ground and below ground coatings systems
Excellent organizational skills
Excellent verbal and written communication skills
Must have reliable transportation
Must have valid driver's licenses
NACE Coating Inspector - Level 1 (CIP 1) Certification
OSHA 10

Job Responsibility

Serve as the Site Quality Control Manager in accordance with the Project Quality Control Plan primarily for coating activities
Serve (when needed) in on-site role when needed as Site Construction / Health and Safety Manager primarily but not limited to coating of fuel system assets
Off-site support of coatings work plan development in concert with manufacturers specifications and prevailing standards
On-site NACE superintendence, super surveillance and hold point inspections of subcontracted coating activities
Utilization of Microsoft Office Suite and other similar applications to plan, document and report coating work and NACE inspections in accordance with the project and industry standards
Maintains effective communications with on-site clients, subcontractors and Project Manager
Ensures Subcontractor adherence to all typical and specified requirements associated with field and shop coating actions
Implements plans and monitors work activities to ensure project execution supports compliance internal and external timelines and objectives
Conducts on-site meetings with the client and subcontractors as required
Liaises with government Quality Assurance inspectors as required

Fulltime

Coatings Inspector

An experienced AMPP, SSPC, or NACE certified Coatings Inspector is needed for a ...

Location

United States , Cobleskill, NY

Salary:

40.00 - 54.00 USD / Hour

Erdman Anthony

Expiration Date

Until further notice

Requirements

A valid driver's license is required
A minimum of 5+ years of coatings experience
Certified in one or more of the following: AMPP or NACE CIP Level 1
SSPC-C1
AMPP or SSPC Bridge Coatings Inspector (BCI) Level 1
Provide a detailed resume highlighting your experience
Experience completing Daily Work Reports

Job Responsibility

Oversee contractors' work to ensure conformance with the contract documents
Ensure all work follows the NYSDOT Standard Specifications
Verify all materials on-site (abrasive, primer, paint, etc.) are from an approved source
Assure all surface preparations and coatings requirements comply with AMPP procedures
Monitor the containment / work station for cleanliness, relative humidity, temperature, dew point, etc.
Prepare Daily Work Reports documenting completed work for payment to contractor

Fulltime

New

Creel Operator - Day Shift

The Creel Operator position is a non-exempt, hourly position responsible for sta...

Location

United States , Cowpens

Salary:

17.00 USD / Hour

Hunter Douglas

Expiration Date

Until further notice

Requirements

Ability to lift, carry and/or move up to 30 pounds
Ability to push/pull up to 1,000 lbs. on pallet jack
Ability to work with minimal supervisory direction
Ability to communicate both verbally and in writing in English
Ability to work in an environment where temperature varies in range
Ability to tolerate moderate to loud plant noise levels
Skill in establishing and maintaining effective work relationships
Ability to work in a team environment and solicit the assistance of co-workers
Ability to work and keep pace in fast paced environment
Ability to work with limited supervision

Job Responsibility

Clean the Coating Machine in a timely manner
Clean coating dies
Start-up/circulate plastisol in the Coating Machine
Thread up lines on the Coating Machine
Package empty/reject fiber glass bobbins for return to Supplier
Bring fiber glass pallets into the Creel Room and unpack them
Help Coating Inspector doff the bobbins throughout the shift
The frequent removal of waste from Coating Machine
All other duties as assigned

What we offer

Generous benefits package including medical, dental, vision, life, disability
A company culture that prioritizes internal development and professional growth
Time off with pay
401(k) plan with a degree of employer matching
Paid parental leave
Wellness programs and product discounts

Fulltime

Qa/qc Coordinator

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

BSc degree or higher in Mechanical or Metallurgical Engineering from a recognized Engineering faculty
Valid CSWIP 3.2.1 or AWS Senior Welding Inspection Certificate (SCWI) with at least five years of post-certification experience
B Gas Grade 2 or NACE Level II Coating Inspector qualification is preferable
NDT Level II in RT, UT, PT & MT / NDT qualifications per ASNT or ISO requirements
Certified QMS Lead Auditor in accordance with ISO 9001:2015 with at least five years of auditing experience
Strong knowledge of international codes/standards: EN, ISO, API, ASME, ASTM
Good leadership and communication skills
Ability to work on projects in a complex, multicultural environment
Proficient in MS Office, database management, spreadsheets, and email communication
Minimum 15 years as QA/QC Coordinator or QA/QC Lead, leading multidiscipline QC inspector teams for inspection and testing activities on major oil and gas projects, including offshore process platforms, jackets, subsea pipelines, and all phases of manufacturing, fabrication, construction, and offshore installation

Job Responsibility

Report quality status daily to the Senior Quality Engineer
Supervise and coordinate all activities related to the Quality Management System during construction and installation phases
Ensure all works by contractors, subcontractors, vendors, manufacturers, service providers, and third-party inspectors comply with project specifications, corporate standards, international codes, and QA/QC requirements
Review technical and quality documents, ITPs, and QA/QC procedures in the document management system
Ensure approved QA/QC documents are implemented at worksite level, including quality plans, control procedures, ITPs, and inspection checklists
Lead and coordinate QC inspectors’ activities at fabrication sites, construction sites, and offshore installations
review inspection reports
Monitor contractor/vendor implementation of approved quality requirements and address deficiencies
Act as focal point for resolving shop/site-related quality control issues in consultation with senior quality management
Control and follow up on technical deviations, material substitutions, and changes to inspection/test requirements

New

Sr. Mgr., Civil & Corrosion Engineering

Oversees engineering support for departments maintaining and operating gas and/o...

Location

United States , Oakland

Salary:

167000.00 - 284000.00 USD / Year

PG&E Corporation

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Engineering
8 years of relevant experience
Desired: Professional Engineering license
Experience in transmission line civil design, foundations and site development
Financial acumen with experience managing engineering budgets
NACE certified cathodic protection technologist or higher
NACE certified coatings inspector
Ability to create, promote and manage a safe work environment
Ability to develop and manage dept. budgets, expenses, variances
Ability to communicate and support company and organization policies, procedures, goals, objectives, vision and values

Job Responsibility

Develops and implements strategic direction and roadmap for civil and corrosion engineering, operations, and maintenance
Ensures the civil/corrosion engineering organization is operating efficiently and effectively
Leads the engineering functions and technical aspects/activities around materials and operations
Leads the engineering teams supporting analysis, evaluation, repair methods and engineering strategies on towers, poles, structures and overall electric transmission structures. Additional support might be needed for access roads, grading, drainage, site development, structural steel reinforcement and/or repairs
Reviews and approves engineering drawings, specifications, calculations and design packages. Leads the planning, utilization, and emergency response
Recruits/selects, communicates expectations, fosters employee engagement, coaches, develops, mentors, recognizes and rewards employees in order to drive performance and results

Fulltime

Resident Engineer/Project Manager

Bloom is currently seeking a Resident Engineer/Project Manager professional with...

Location

United States , Chicago

Salary:

100000.00 - 160000.00 USD / Year

Bloom Companies

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Civil Engineering or Construction Management
PE license preferred
15+ years of progressive experience in construction inspection and construction layout staking
IDOT Certification of Documentation of Contract Quantities (Required)
Familiarity with Illinois Department of Transportation and Illinois Tollway construction engineering practices, standards and documentation
National Corrosion Engineer (NACE) Certified Coatings Inspector a plus
Good decision making skills, flexibility, focus on quality and attention to detail
Excellent communication skills
Experience with Microsoft Office software (Excel, Word and Power Point) and CADD (MicroStation preferred)
Willing to travel

Job Responsibility

Highly motivated, qualified and client service-oriented Resident Engineer/Project Manager specializing in roadway/highway/bridge construction inspection
Construction schedule monitoring
Project budget monitoring
Field supervision of trained technicians and junior engineers
Translate and implement project plans and special provisions
Evaluate and document construction operations
Generate materials testing frequency and manage the QA program
Complete required project documentation including progress payments and contract changes to achieve final project acceptance
Ensure quality control activities are performed for all assigned work and back check work of others
Interact and communicate effectively with design team members, clients, and other agencies

Quality Lead

Location

Brunei

Salary:

Not provided

Bureau Veritas Certification CZ, s.r.o.

Expiration Date

Until further notice

Requirements

HND/HNC in Mechanical Engineering or relevant discipline
IRCA Lead Auditor certified
CSWIP 3.1 + CSWIP/PCN Level 2 in Radiographic Interpretation
BGAS Grade 2 / NACE Level 2 Coating Inspector
Two additional NDT Level II qualifications (or “have had”)
Minimum 12 years QA/QC experience, including 6 years in a lead or senior role (10/5 for Bruneian development)

Job Responsibility

Lead the QA/QC function and oversee all quality personnel
Approve Quality Plans, ITPs, Surveillance Plans, and QA procedures
Lead audits, surveillance, and quality investigations
Ensure all inspection activities comply with QA/QC requirements and ISO 9001 / ISO 17020
Manage NCRs, corrective actions, and continuous improvement initiatives
Provide technical assurance for inspection reports and deliverables

Lead Quality Inspector

Reporting to the Quality Supervisor, you will be responsible for performing visu...

Location

United States , Houston

Salary:

65000.00 - 70000.00 USD / Year

Celeros Flow Technology

Expiration Date

Until further notice

Requirements

NACE Level II Coatings required
Supervisory experience required
Experienced in use of precision inspection equipment (ex., mics, callipers. Etc) to measure dimensional details as listed on drawings
Knowledge in reading & interpret blueprints, including GD&T
Experience in using and programming of Articulated ARMs is required
Knowledge of manufacturing processes and techniques, test equipment and procedures, and assembly applications
Use of hand and power tools
Strong computer skills including MS Office Suite skills, including Word, Excel, and Outlook
Experience with SAP (Required)
Ability to work in a team-oriented environment that is fast-paced and demanding

Job Responsibility

Performing visual, mechanical inspection of purchased or manufactured parts, in process or finished, to determine if the parts conform to specifications, drawings, designated codes and standards
Using precision measuring and testing equipment, including calipers, height gage, micrometre’s, surface plate, Articulated ARM, Optical Comparator to perform mechanical inspections
Preparing a Non-Conformance Report (NCR) for any part that does not meet specified requirements and processing it per established procedures
Document nonconformances in SAP- NCR module where needed and complete the transactions in SAP
Review and verification of materials received from vendors
Witnessing internal testing procedures to verify accuracy of results
Interpreting and executing an Inspection and Test Plan (ITP)
Interfacing with third-party inspectors to verify completion of required customer requests
Handling other assigned work-related functions as deemed necessary and appropriate by your immediate supervisor
Provide on-the-job training and guidance to Level I inspection personnel

What we offer

Health Insurance (effective on start date)
Dental/Vision (effective on start date)
Flexible Spending Accounts/Health Savings Accounts
Life Insurance/Disability/Accident/Critical Illness
401(k) Savings Plan with generous company match
Tuition Reimbursement
Paid time off/Generous Holiday Schedule

Fulltime

Coatings Inspector

Erdman Anthony

Location:
United States , Binghamton

Category:
Construction

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
January 10, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Coatings Inspector

NACE Coating Inspector - CIP 1

Coatings Inspector

Creel Operator - Day Shift

Qa/qc Coordinator

Sr. Mgr., Civil & Corrosion Engineering

Resident Engineer/Project Manager

Quality Lead

Lead Quality Inspector

Coatings Inspector

Erdman Anthony

Location:United States , Binghamton

Category:Construction

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:January 10, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Coatings Inspector

NACE Coating Inspector - CIP 1

Coatings Inspector

Creel Operator - Day Shift

Qa/qc Coordinator

Sr. Mgr., Civil & Corrosion Engineering

Resident Engineer/Project Manager

Quality Lead

Lead Quality Inspector

Location:
United States , Binghamton

Category:
Construction

Contract Type:
Not provided

Job Posted:
January 10, 2026