Coating Job at Nesco Resource (Frankfort)

Senior Subsea Pipeline Marine Inspector

Airswift are a Global Manpower Provider specializing in the Energy, Infrastructu...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor’s degree in engineering discipline (Mechanical) with demonstrated knowledge and experience
CSWIP 3.4UC Underwater Inspection Controller (Ref. CSWIP Document No.CSWIP-DIV-7-95 – Part 2)
Current / valid BOSIET, TBOSIET, FOET or TFOET certificate (Ref. OPITO requirements), as applicable, in conjunction with an offshore medical certificate
Experience in conducting QMS audits and QA verification programs for various project phases (i.e., Engineering, Procurement, Construction and Installation (specifically, the Repair / Installation of pipelines and their associated infrastructure) would be preferable
At least six (6) years of working experience in Quality Assurance and Control (QA/QC) within the Oil and Gas industry (i.e., onshore and offshore)
Should have a proven history as a lead 3.4UC underwater inspection controller within demanding subsea/offshore projects
Subsea pipeline project experience is highly desired, with emphasis on pipeline operations, integrity assurance/non-destructive testing (NDT) and inspection, maintenance and/or design and construction
Familiarity with marine vessel operations and the organisational responsibility of the (i) Offshore Construction/Installation Manger, (ii) Vessel Master, (iii) Diving and ROV Supervisors, (iv) Client Representative(s), (v) Certifying Authorities, etc.
Knowledge and working experience of underwater inspection (UWI) in the form of visual inspection and non-destructive testing (NDT) conducted by means of the intervention of diver(s) and/or remotely operated vehicle (ROV) or crewed submersible (i.e., either as a practitioner and/or as the result of training or certification conforming to the requirements of CSWIP Document No. CSWIP-DIV-7-95 – Part 1 and 2)
With respect to UWI and other related activities, shall be familiar with (i) relevant subsea applied inspection systems, (ii) recording and processing of data, (iii) quality assurance (QA), (iv) inspection planning and briefing, (v) the capabilities and limitations of divers/ROV’s and submersibles, and (vi) the care and deployment of equipment

Job Responsibility

Ensure compliance with QatarEnergy LNG systems and processes, including the Project Management System. Engage contractors and applicable third-party organisations with a professional approach and maintain a good working level relationship
Have a knowledge of the front end engineering design (FEED) deliverables and engineering study reports to support the implementation of the Project Quality Plan (PQP) and associated Procedures
Review the project Scope of work, to determine the nature, extent, and frequency of quality verification activities
Monitor, evaluate and report the inspection and testing status of the pipeline repair activities
Maintain interface relationships with Subsea Pipeline Repair Installation, and Inspection Contractors (including nominated specialist third-party Contractor organisation(s)), and the applicable regulatory focal points
especially, those functioning offshore
Review Contractor’s and Vendor’s quality reports / deliverables, in line with the project quality requirements
In conjunction with the QA/QC delegation operating offshore, verify that the repair activities are in accordance with approved documented information (i.e. procedures, specifications, detailed methodologies, etc)
Support the underwater inspection (UWI) activities during the offshore / subsea repairs, by means of the development of job records, preparation of daily reports, review of diver commentary and transfer into the written form, interpretate ROV camera footage and transfer into the written form and be able to produce an oral commentary of the daily activities, as and when required
Monitor the technical inspections, verification, certification and acceptance by Specialist Third Party Inspection (TPI) Contractor, as applicable, and develop the final documentation for each offshore campaign (i.e., PL-49, PL-75, PL-610 and PL-811)

Fulltime

Engineering Specialist, Textiles

Responsible for the development, maintenance, and support of high complexity tec...

Location

United States , Batesville

Salary:

104000.00 - 143000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Engineering required
Advanced degree preferred
12 years of experience (minimum 5)
Experience in manufacturing of soft goods - foam and coated fabrics
Knowledge and experience utilizing standard test methods for fabrics
Knowledge and experience in coated fabric manufacturing is a plus
Knowledge and experience in welding of coated fabrics
Strong Interpersonal skills with the ability to work collaboratively with others in a team environment
Authorized to work for any employer in the U.S. without sponsorship.

Job Responsibility

Applies technical competencies in very difficult situations for new product projects
Organizes and leads cross-functional teams in developing creative solutions to problems
Leads the technology vision of the team
integrates technology into the product
Drives decisions on patent strategy and technology roadmaps to support business objectives
Provides technical guidance and risk mitigation to teams
Considers industry trends in creating new methods for planning, designing and carrying out programs and initiatives while influencing the company's strategic plan to support global goals & objectives.

What we offer

Medical and dental coverage starting on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accidents
Employee Stock Purchase Plan (ESPP)
401(k) Retirement Savings Plan with employee contributions and company matching
Flexible Spending Accounts
Educational assistance programs
Paid holidays and paid time off (20-35 days depending on length of service)
Family and medical leaves of absence
Paid parental leave
Commuting benefits

Fulltime

Engineering Specialist, Textiles

Responsible for developing, maintaining, and supporting high complexity technolo...

Location

United States , Batesville

Salary:

104000.00 - 143000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Engineering required
Advanced degree preferred
12 years of experience (minimum 5)
Experience in manufacturing of soft goods - foam and coated fabrics
Knowledge and experience utilizing standard test methods for fabrics
Knowledge and experience in coated fabric manufacturing is a plus
Knowledge and experience in welding of coated fabrics
Strong Interpersonal skills with the ability to work collaboratively with others in a team environment
Applicants must be authorized to work for any employer in the U.S.
We are unable to sponsor or take over sponsorship of an employment visa at this time

Job Responsibility

Applies technical competencies in very difficult situations for new product projects
Organizes and leads cross-functional teams in developing creative solutions to problems
Leads the technology vision of the team
integrates technology into the product
Drives decisions on patent strategy and technology roadmaps to support business objectives
Provides technical guidance and risk mitigation to teams
Considers industry trends in creating new methods for planning, designing and carrying out programs and initiatives while influencing the company's strategic plan to support global goals & objectives

What we offer

Support for Parents
Continuing Education/Professional Development
Employee Health & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer
Medical and dental coverage that start on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP)
401(k) Retirement Savings Plan
Flexible Spending Accounts

Fulltime

Interior Remove & Install Technician

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Windsor Locks

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

3-5 years of Interiors Remove & Install experience on corporate aircraft
Ability to break down cabinets remove hardware, inlay etc.
Ability to strip finish utilizing heat and scraper
Experience with sanding and prepping raw veneer and hardwood for finish, including touching up defects in veneer
Ability to mix match and apply stains and paints on new veneers
Knowledge on spraying polyester base coats and urethane top coats
Experience with Aircraft touch up
Ability to mask and unmask components for finish process
Mechanical aptitude
Ability to interpret and work with mechanical engineering drawings

Job Responsibility

Fabricate, install and refurbish aircraft interior equipment and furnishings per work order or customer request
Perform and document all work performed per appropriate manuals and regulations as required
Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hanger positions)
Comply with environmental health / safety policies / procedures
Participate in 5-S activities
Assist with additional work on drop-ins and planned maintenance within the facility during slow periods of unplanned work as needed
Clean aircraft as required
Travel on international assignments if required
Assist with maintenance at off-site locations as needed
Assist with other maintenance disciplines as needed

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Lead Interior Craftsperson

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Tucson

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

3-5 years interiors experience (i.e. previous wood finish and soft goods experience (i.e., auto, RV, boat, etc.))
Ability to break down cabinets remove hardware, inlay etc.
Ability to strip finish utilizing heat and scraper
Experience with sanding and prepping raw veneer and hardwood for finish including touching up defects in veneer
Ability to mix match and apply stains and paints on new veneers
Knowledge on spraying polyester base coats and urethane top coats
Experience with Aircraft touch up
Ability to mask and unmask components for finish process
Mechanical aptitude
Ability to interpret and work with mechanical engineering drawings

Job Responsibility

Fabricate, install and refurbish aircraft interior equipment and furnishings per work order or customer request
Perform and document all work performed per appropriate manuals and regulations as required
Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hanger positions
Comply with environmental health / safety policies / procedures
Participate in 5-S activities
Perform work in a safe and timely manner
Assist with additional work on drop-ins and planned maintenance within the facility during slow periods of unplanned work as needed
Clean aircraft as required
Travel on international assignments if required
Assist with maintenance at off-site locations as needed

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Staff Manufacturing Engineer, Paint

Archer is an aerospace company building an all-electric vertical takeoff and lan...

Location

United States , Santa Clara

Salary:

150120.00 - 166800.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Bachelor’s or advanced degree in Aerospace, Mechanical, Manufacturing, Materials Engineering or equivalent experience
5+ years hands-on experience developing and running industrial paint/coating processes in aerospace or automotive manufacturing (or combination)
Experience with both manual and automated application systems required
Demonstrated experience specifying and commissioning paint booths, pretreatment lines, ovens, robotics and paint application equipment, and managing supplier FAT/SAT
Experience with process control tools (SPC, FMEA, control plans), root-cause problem solving, and NPI-to-production ramp methodologies
Working knowledge of coating chemistries, VOC and environmental controls, and air filtration/airflow design for paint booths
Proficiency using 2D & 3D CAD to generate manufacturing layouts, assembly models, and detailed part drawings for fabrication
Strong project management, cross-functional communication, and supplier management skills
Ability to write technical specs and run technical acceptance tests
Able to maintain organization and focus in a highly dynamic environment

Job Responsibility

Lead end-to-end development of paint and coating processes (pretreatment, primer, base, clear, specialty coatings) suited to composite and metallic aircraft structures
Define paint line concepts (booths, pretreatment, ovens/cure, conveyors/handling, robotics/automation, filtration and airflow topology) and produce equipment procurement specs
Partner with Industrial Design and Design Engineering to translate aesthetic and tolerancing requirements into processable paint solutions
Work with the Materials & Processes Team to qualify coatings, surface prep requirements, chemistries, corrosion protection, and ensure compatibility with bonding/assembly processes
Manage supplier selection, technical integration, FAT/SAT, installation oversight, and handover to production
Develop control plans, work instructions, process parameters (temperature, humidity, air balance, film thickness, bake cycles), SPC charts, and poka-yoke for critical steps
Design and deploy automation where it increases throughput and consistency (robotic application, automated masking/demasking, part tracking). Balance capital vs. part-rate tradeoffs
Lead NPI-to-production qualification: pilot runs, capability studies, first-article acceptance, lessons-learned, and ramp risk management
Ensure environmental, health & safety, and permitting compliance (VOC control, filtration/waste handling, hazardous materials management) and work with EH&S and local permitting teams
Troubleshoot quality escapes, run RCAs and implement corrective/preventive actions

Fulltime

Painter

Join our team as a Painter and bring color to our structural steel pieces, coati...

Location

United States , Little Rock

Salary:

17.00 - 20.00 USD / Hour

Lexicon, Inc

Expiration Date

Until further notice

Requirements

Minimum 2 years’ commercial painting experience with basic knowledge of Structural Steel Fabrication operations preferred
Must be able to understand paint code systems
Must be familiar with paint equipment and different coatings
Should have some knowledge of how to operate a forklift and overhead crane
Must have airless experience
Experience using zinc and epoxy is required
Must be able to read a tape measure and work in fractions
Must be able to lift at least 50 pounds
Job requires excessive amounts of climbing, bending, pushing, pulling, crawling and stooping, etc.
Exposed to extreme temperatures

Job Responsibility

Coating/painting the appropriate surface of structural steel pieces in accordance with SSPC specifications
Receives finished material from shop, prepares surface for coating and sets up paint equipment in order to paint a maximum amount of pieces in the most efficient manner
Gathers needed materials and specifications according to the applicable department prints
Loads finished pieces on trailers for shipping
Responsible for adhering to all company safety and OSHA regulations
The ability to work overtime and regular, punctual attendance is required
Perform non-essential duties as needed

What we offer

Health, Dental, Vision, and Life Insurance
HSA with Employer contributions
Paid Holidays and Vacation
401k with company match
Lexicon University provides free career development and training

Fulltime

Painter

Join our team as a Painter and bring color to our structural steel pieces, coati...

Location

United States , Little Rock

Salary:

17.00 - 20.00 USD / Hour

Lexicon, Inc

Expiration Date

Until further notice

Requirements

Minimum 2 years’ commercial painting experience with basic knowledge of Structural Steel Fabrication operations preferred
Must be able to understand paint code systems
Must be familiar with paint equipment and different coatings
Should have some knowledge of how to operate a forklift and overhead crane
Must have airless experience
Experience using zinc and epoxy is required
Must be able to read a tape measure and work in fractions
Must be able to lift at least 50 pounds
Job requires excessive amounts of climbing, bending, pushing, pulling, crawling and stooping, etc.
Exposed to extreme temperatures

Job Responsibility

Coating/painting the appropriate surface of structural steel pieces in accordance with SSPC specifications
Receives finished material from shop, prepares surface for coating and sets up paint equipment in order to paint a maximum amount of pieces in the most efficient manner
Gathers needed materials and specifications according to the applicable department prints
Loads finished pieces on trailers for shipping
Responsible for adhering to all company safety and OSHA regulations
The ability to work overtime and regular, punctual attendance is required
Perform non-essential duties as needed

What we offer

Health, Dental, Vision, and Life Insurance
HSA with Employer contributions
Paid Holidays and Vacation
401k with company match
Lexicon University provides free career development and training
Paid WEEKLY

Fulltime

Coating

Nesco Resource

Location:
United States , Frankfort

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
March 01, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Coating

Senior Subsea Pipeline Marine Inspector

Engineering Specialist, Textiles

Engineering Specialist, Textiles

Interior Remove & Install Technician

Lead Interior Craftsperson

Staff Manufacturing Engineer, Paint

Painter

Painter

Coating

Nesco Resource

Location:United States , Frankfort

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:March 01, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Coating

Senior Subsea Pipeline Marine Inspector

Engineering Specialist, Textiles

Engineering Specialist, Textiles

Interior Remove & Install Technician

Lead Interior Craftsperson

Staff Manufacturing Engineer, Paint

Painter

Painter

Location:
United States , Frankfort

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
March 01, 2026