CMM Operator Job at Select Tool Inc (Shelby Township)

Quality Inspector

The Quality Inspector will be responsible for quality inspection/quality assuran...

Location

United States , Wilmington

Salary:

23.00 - 27.00 USD / Hour

Conformis

Expiration Date

Until further notice

Requirements

High School Diploma, GED, or equivalent work experience
3+ years’ experience performing inspection within an FDA or other regulated environment
Ability to read and interpret engineering drawings
Operate and program CMM
Operate Optical Comparator
20/20 Vision required with or without corrective lenses
Manual dexterity to handle tools and equipment of different sizes
Proficient in the use of hand measuring tools such as calipers, micrometers, dial indicators, etc.
Willingness and ability to embrace new inspection tools and methodology
Ability to multi-task, perform efficiently, and independently

Job Responsibility

Develop and maintain strong internal working relationships across restor3d
Understand the objectives, responsibilities, and mission of the Quality Control department and work towards those goals
Prioritize and plan work activities
adapt for changing conditions
Inspect incoming, in-process, finished parts, and materials for conformance to quality control standards
Must be able to perform 100% inspections of non-conformance reports (NCR’s)
Understanding of calibration requirements for inspection equipment
Contribute towards continuous improvement with regards to Quality, efficiency, and customer focused results
Other responsibilities as assigned

Fulltime

Quality Inspector

We are seeking a skilled and detail-oriented Quality Inspector to join our team....

Location

United States , Hollywood

Salary:

Not provided

Coherent Technical Services

Expiration Date

Until further notice

Requirements

Minimum of 3 years of experience in quality inspection within a manufacturing environment
Proficiency in operating Coordinate Measuring Machines (CMM) and Inspection Arm/Scanner is preferred
Strong knowledge and understanding of ISO9001/2015 and AS9100D standards
Familiarity with inspection techniques, tools, and equipment such as calipers, micrometers, height gauges, gauging fixtures, etc.
Ability to interpret engineering drawings, specifications, and technical documentation
Detail-oriented with excellent analytical and problem-solving skills
Strong organizational and time management abilities to handle multiple inspection tasks and meet deadlines
Excellent verbal and written communication skills
Ability to work independently and as part of a team
Proficiency in using computer software for data entry, analysis, and report generation

Job Responsibility

Perform thorough inspections of incoming materials, in-process components, and finished products to verify conformance with specifications and quality standards
Utilize measuring tools, such as calipers, micrometers, height gauges, and gauging fixtures, to conduct accurate and precise measurements
Operate Coordinate Measuring Machines (CMM) and Inspection Arm/Scanner to inspect complex parts and assemblies
Conduct visual inspections to identify any defects, abnormalities, or non-conformities in products or materials
Document inspection results and maintain accurate records of inspections, including detailed reports and data analysis
Collaborate with the Quality Assurance team to identify areas for improvement and implement corrective actions to address non-conformities
Participate in root cause analysis investigations to determine the cause of quality issues and assist in implementing effective preventive measures
Ensure compliance with ISO9001/2015 and AS9100D standards and actively contribute to maintaining and improving the quality management system
Communicate effectively with production personnel, engineers, and other stakeholders to address quality concerns and provide guidance on quality requirements
Stay updated on industry best practices, new inspection techniques, and emerging quality standards

CNC Machinist

This is a brilliant opportunity to join a globally recognised, multi-award-winni...

Location

United Kingdom , Uxbridge

Salary:

48000.00 GBP / Year

SYNTECH RECRUITMENT LTD

Expiration Date

Until further notice

Requirements

Several years’ experience as a CNC Machinist (milling and/or turning)
Confident setting and operating multi-axis machines
Ability to self-inspect using standard measurement tools
Experience reading CMM reports
Mechanical apprenticeship (ideal but not essential)
Familiarity with 5S, Continuous Improvement, Kanban, or CMM inspection is a plus

Job Responsibility

Setting and operating CNC mills and lathes (Bridgeport, Hurco, Protrack)
Editing G&M programs directly at the machine when required
Producing low-volume, high-precision components
Operating CMM machinery and interpreting CMM drawings
Performing basic machine and tool maintenance
Self-inspecting and deburring components to high standards
Supporting lean manufacturing practices and process improvements

What we offer

pension
canteen
healthcare
parking
Annual company bonus
9% non-contributory pension scheme
Healthcare cash plan and life assurance
Continental shift pattern with balanced work-life schedule
Strong commitment to training and professional development

Fulltime

Cmm operator ii

The Quality Control Inspector II will be responsible for executing Quality Contr...

Location

United States , Austin

Salary:

Not provided

Diasorin

Expiration Date

Until further notice

Requirements

HS Diploma or equivalent required
Associate's degree in a technical field preferred
5 years relevant work experience or training OR 7 years related experience without Associate's degree
Proficient knowledge of secondary finishing processes (i.e., plating, powder coating, polishing etc..)

Job Responsibility

Performing incoming dimensional inspection of precision machined, molded and electromechanical parts using hand tools
Performing inspections with Optical Comparator, Digital Microscope, Profilometer experience needed
Programming and operating Zeiss CMM and vision system using Calypso software
Process purchased materials for release
Application of GD&T practices
Take ownership and assist in core QC functions and associated activities relating to Incoming Product Control
Fulfill individual and departmental CAPP objectives
Assist and document the investigation and resolution of problems initiated through non-conformances, corrective action, customer complaints, and/or audit findings
Coordinate and/or conduct departmental maintenance and calibration of local measuring and monitoring devices
Schedule outsourced testing and services

What we offer

competitive salary and benefits package

Fulltime

Quality Inspector

The Quality Inspector will be responsible for quality inspection/quality assuran...

Location

United States , Durham

Salary:

24.00 - 26.00 USD / Hour

Conformis

Expiration Date

Until further notice

Requirements

High School Diploma, GED, or equivalent work experience
3+ years’ experience performing inspection within an FDA or other regulated environment
Ability to read and interpret engineering drawings
Operate and program CMM
Operate Optical Comparator
20/20 Vision required with or without corrective lenses
Manual dexterity to handle tools and equipment of different sizes
Proficient in the use of hand measuring tools such as calipers, micrometers, dial indicators, etc.
Willingness and ability to embrace new inspection tools and methodology
Ability to multi-task, perform efficiently, and independently

Job Responsibility

Develop and maintain strong internal working relationships across restor3d
Understand the objectives, responsibilities, and mission of the Quality Control department and work towards those goals
Prioritize and plan work activities
adapt for changing conditions
Ability to read and interpret prints and apply Geometric Dimensioning and Tolerancing (GD&T) as defined on the print
Inspect incoming, in-process, finished parts, and materials for conformance to quality control standards
Must be able to perform 100% inspections of non-conformance reports (NCR’s)
Understanding of calibration requirements for inspection equipment
Other responsibilities as assigned

Fulltime

CMM Metrology Engineer

As a successful family-owned company on a path to global growth, the Brose Group...

Location

United Kingdom , Coventry

Salary:

Not provided

Brose Fahrzeugteile

Expiration Date

Until further notice

Requirements

HNC or higher qualification in Mechanical, Electrical, or Electronic Engineering (or equivalent)
2–3 years of relevant experience in a metrology or quality engineering role
Proven expertise in CMM programming and operation, particularly using PC-DMIS is a must
Strong understanding of engineering drawings and GD&T (Geometric Dimensioning and Tolerancing)
Familiar with statistical methods and skilled in preparing detailed measurement reports
Knowledge of problem-solving tools such as 8D, Ishikawa, and FMEA
Comfortable using basic measurement equipment and working with SAP modules for Goods Receiving and Vendor Management
PC literate, with good command of Microsoft Office tools
Team player with strong communication skills and a detail-oriented mindset

Job Responsibility

Program and operate Coordinate Measuring Machine (CMM) using PC-DMIS (2019 onwards)
Plan and perform annual internal and external re-qualification measurements to support the product testing plan
Conduct CMM measurements for PSW submissions, ensuring alignment with technical specifications and project timelines
Support the Goods Inwards Testing Plan by performing measurements and recording results in SAP
Carry out internal PPAP measurement according to specifications and timing schedules
Provide accurate measurement data to support problem resolution and statistical analysis
Communicate with technical personnel from customers and suppliers as needed
Adhere to company policies and procedures, including those related to health & safety, quality, environmental standards, and ethics
Complete additional tasks as required to support quality and production targets

What we offer

Modern working environment
Equal opportunities employer
Inclusive working environment
Culture of respect and appreciation
Opportunity to realise full potential

Engineering Support Technician

Ommo is the pioneer of permanent magnet–based 3D tracking technology, building a...

Location

United States , Carrollton

Salary:

55000.00 - 70000.00 USD / Year

Ommo Technologies

Expiration Date

Until further notice

Requirements

High School Diploma or equivalent
5+ years of relevant experience
Strong technological fluency and ability to adapt to new tools and workflows
Demonstrated ability to work independently in a dynamic, unstructured environment
Excellent attention to detail, organizational skills, and cleanliness in workspace maintenance
Prior experience in lab, test, or prototype environments
Strong communication and task prioritization skills
Expertise in 3D printing technologies

Job Responsibility

Support engineering teams through product testing, pilot build assembly, and post-processing of parts (e.g., cleaning, sanding)
Manage lab operations, including inventory control, cleanliness, and general organization
Operate and maintain various lab equipment
perform preventive maintenance as needed
Inspect and measure parts against engineering drawings and specifications
Use and maintain 3D printers
expertise required
Operate a Coordinate Measuring Machine (CMM) and assist with part verification
Contribute to equipment upkeep and machining tasks (machining experience is a plus)
Work independently to prioritize multiple tasks and manage small projects as assigned

What we offer

Equity
Paid Time Off
Medical, Dental & Vision
401K & 401K Matching

Fulltime

Operator 2

Uses hands, eyes, ears, legs, machines, materials, tools and equipment to set up...

Location

United States , St Joseph

Salary:

Not provided

Robert Bosch Sp. z o.o.

Expiration Date

Until further notice

Requirements

High School Graduate or General Education Degree (GED) is preferred
technical or vocational training/education at post-high school level is a plus
No prior experience necessary, but former manufacturing experience is preferred
Ability to learn equipment programming through on-the-job training
Ability to use data entry systems, record information software systems, the email system, and the bar-coding systems
Powered industrial truck operating certificate as required
Accuracy
Safety Awareness
Detail Oriented
Reliability

Job Responsibility

Ready packaging/containers for shipment, such as, but not limited to taping, sealing, stapling, banding and stretch-wrapping
Prep containers for shipment with interior packaging (bubble wrap)
All skills and responsibilities of the Operator 1 classification
Ability to operate CMM
Load and set tooling
Make sensor adjustments
Remove and replace guards
Reset Pallet Stops and RF Tags
Tool Management including, but not limited to, tool settings and pre-setting
Offsets

Fulltime

Select Country

CMM Operator

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?

CMM Operator

Quality Inspector

Quality Inspector

CNC Machinist

Cmm operator ii

Quality Inspector

CMM Metrology Engineer

Engineering Support Technician

Operator 2

Our AI answers in your language