Cleanroom Operator Job at PPG Industries (Monroeville)

New

Field Service Engineer 4

As a Field Service Engineer at Lam, you will step into the limelight of customer...

Location

United States , Arizona

Salary:

Not provided

Lam Research

Expiration Date

Until further notice

Requirements

Bachelor's degree in Electronics, Engineering, or related field and 8+ years of experience
or Master's degree with 6+ years
or equivalent work experience.
Previous experience in installation, maintenance, repair, or troubleshooting of semiconductor capital equipment.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.

Job Responsibility

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Analyze, troubleshoot, conduct diagnostics, isolate issues, and solve problems across a broad range of Lam products to the component level to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Perform field modifications and updates, maintaining records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Partner directly with customer at a management and engineer levels, run customer meetings, measure customer trust, and lead improvement programs.
Transparently discuss opportunities and challenges with customer to increase trust.
Provide technical instruction, leadership, and mentoring for more junior engineers.
Coach and delegate to more junior employees to ensure project completion on time.

Fulltime

New

Production Technician I, Kiefel

The Kiefel Production Technician I is a Salaried Non-Exempt position which contr...

Location

United States , Marion

Salary:

44000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma, GED or equivalent
At least 1-2 years Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc.
Must have basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Must be able to perform basic mathematics
Proficient in how to use a calculator and measurement tools (calipers, snap gauges, rulers), as well as basic hand tools
The ability to push/pull and lift/carry up to 50 pounds and stand/walk continuously throughout the shift
Normal visual acuity required
Ability to squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck, twist and bend at the waist and balance
Applicants must be authorized to work for any employer in the U.S.

Job Responsibility

Operate, monitor, and adjust as necessary a Kiefel machine using controls on an electrical control panel (HMI) or by making manual adjustments
Load and replenish production supplies (i.e. injection sites, tubing, PVC/Non-PVC roll stock and adhesive) at a rate consistent with production needs
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Inspect finished product and ensure that the quality standards have been met
Load and secure finished product in mobile closets
Execute a machine changeover when assigned (material changeovers only)
Document required information on manufacturing logs and/or POMS system
Identify, correct or escalate any inefficiency in the machine's performance
Test, inspect and package Inter-Plant Shipping Orders (IPSO)
Notify the supervisor and take appropriate action if any safety, quality, or mechanical issues occur

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Flexible Spending Accounts
educational assistance programs

Fulltime

New

Production Technician I, Fill/Pouch

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

United States , Marion

Salary:

44000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma, GED or equivalent
Must be at least 18 years of age
Must have basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Must be able to perform basic mathematics
Proficient in how to use a calculator and measurement tools as well as basic hand tools
Must have basic computer skills

Job Responsibility

Operate, monitor and make minor adjustments as necessary to manual and automated filling equipment and machines using controls on a (HMI) or by way of manual adjustments (ex. Photo-eye and sensors)
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Document required information on manufacturing logs and/or POMS system
Set-up load and replenish production supplies by use of a powered industrial truck (PIT) at a rate consistent with production needs
Execute Batch/Code changes, tank changes, as well as sub lots as required
Escalate any inefficiency in the machine’s performance including mechanical wear, alignment, adjustment, and setup issues
Notify the supervisor and take appropriate action if any safety, quality, mechanical or discrepancy issues occur
Use tools to measure the product, ensuring the output meets specifications, making adjustments/repairs as needed
Perform and document scheduled cleaning activities
Learn, understand and apply rigorous quality standards, Standard Operating Procedures (SOPs) and Current Good Manufacturing Practices (cGMP)

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement

Fulltime

New

Senior Manufacturing Engineer – Factory Performance & Industrial Engineering

As a Manufacturing Engineer at ASML, you play a vital role in the creation of ad...

Location

United States , San Diego

Salary:

102375.00 - 153563.00 USD / Year

ASML

Expiration Date

Until further notice

Requirements

Bachelor’s degree or higher in Mechanical Engineering, Electrical Engineering, Industrial Engineering, or a related field
4+ years of relevant experience in manufacturing engineering or industrial engineering roles
Experience reading technical drawings (GD&T), creating work instructions, and applying statistical methods to engineering problems
Working knowledge of Lean Manufacturing, 5S, 8D, FMEA, and 5 Why problem solving
Familiarity with Bill of Materials (BOM) structures
Ability to work in a cleanroom manufacturing environment
Hands on experience with Excel, Python, MATLAB, Minitab, JMP, Visio, or similar tools
Demonstrated curiosity, structure, and passion for working directly with production teams on the shop floor
Experience in a manufacturing environment is preferred
Familiarity with process optimization tools and quality assurance methods

Job Responsibility

Develop, implement, and optimize manufacturing processes for ASML products
Identify and resolve production issues to maintain high standards
Collaborate with team members to improve workflow and safety
Support the introduction of new products and technologies into manufacturing
Monitor and analyze data to drive continuous improvement
Train and guide operators and technicians on best practices
Ensure compliance with environmental and safety regulations
Analyze cycle time, throughput, bottlenecks, and material flow to identify waste and drive factory level improvements
Conduct industrial engineering studies including work content assessment, layout evaluation, and material flow optimization
Perform SPC and process capability analysis to identify sources of variation and implement corrective measures to reduce part to part variation

What we offer

Medical, dental, vision, and basic life insurance
401k plan
8 hours of vacation leave every month
13 paid holidays throughout the calendar year

Fulltime

New

Production Technician I

This is where my hands make life-sustaining products. You are driven by the know...

Location

United States , Marion

Salary:

44000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma or GED and must be at least 18 years of age
Basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Ability to perform basic mathematics
Proficient in how to use a calculator and measurement tools as well as basic hand tools
Basic computer skills

Job Responsibility

Operate, monitor and make adjustments as necessary to manual and automated filling equipment and machines using controls on an electrical control panel (HMI) or by way of manual adjustments
Set-up load and replenish production supplies by use of a powered industrial truck (PIT) at a rate consistent with production needs
Perform minor routine and preventative maintenance such as alignment adjustments, replacement of machine parts or belts, cleaning and lubrication while supporting Total Productive Maintenance (TPM)
Reconcile headcount needed on a per shift basis based on schedule production demands
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Inspect finished product to ensure quality standards are being met
Complete batch/code changes, tank changes, as well as sub lots as needed
Document required information on manufacturing logs and/or POMS system
Investigate, identify and correct or escalate any inefficiency in the machine's performance including mechanical wear, alignment, adjustment, and setup issues
Develop standard work for troubleshooting and setups/changeovers

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Flexible Spending Accounts
educational assistance programs

Fulltime

New

Facilities Maintenance Technician (2nd Shift)

Facilities Maintenance Technician plays a key role in maintaining and improving ...

Location

United States , Wichita

Salary:

Not provided

Fagron

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
technical or trade school certification in HVAC, electrical, mechanical, or industrial maintenance preferred
3+ years of maintenance experience in a regulated manufacturing or pharmaceutical environment (503B, 503A, medical device, or biotech preferred)
Working knowledge of cGMP, FDA, and cleanroom operational standards
Demonstrated experience with maintenance management systems (CMMS)
Ability to read and interpret technical drawings, P&IDs, and equipment manuals
Strong troubleshooting skills across mechanical, electrical, pneumatic, and limited automation systems
Basic computer proficiency (Microsoft Outlook, Excel, Word)
Reliable, detail-oriented, and able to work independently or as part of a team
Availability for occasional on-call or weekend maintenance support

Job Responsibility

Repair and maintain plant equipment and building infrastructure per manufacture specifications, SOP’s incompliance with cGMP’s
Diagnose problems, replace, or repair parts, test and make appropriate adjustments
Strong understanding of electrical wiring and installation
Ensure facility and equipment are kept clean, in a safe, and serviceable condition
Interface and augment Computerized Maintenance Management System (CMMS)
Maintain spare parts inventory, order, and restock as required
Partners with Quality and follows the necessary procedures (change controls, work orders, investigation, etc.) associated with building equipment and infrastructure
Understands and monitors Building Management System (BMS) and coordination with Environmental Monitoring on temperature, relative humidity, and pressures issues
Communicates with internal departments, customers, and vendors on status of work and issues effecting services
Coordinate tasks and scheduling with vendor resources

What we offer

competitive salary
comprehensive benefits
performance package
ability to be part of an international leader in an expanding industry

Fulltime

New

Pharmacy Assistant

As a Pharmacy Assistant, you will play a crucial role in our manufacturing team ...

Location

Canada , Mississauga

Salary:

48000.00 - 72000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High school diploma or equivalent experience
Good Manufacturing Practices (GMP) and Standard Operating Procedures (SOPs) knowledge
1-2 years of pharmaceutical manufacturing or related experience
Strong verbal and written communication skills
Good decision-making and organizational skills
Capability to cover all shifts, including mornings, evenings, weekends, and holidays
High level of focus on accuracy and a strong commitment to quality
Strong problem-solving abilities and capacity to operate independently
Teamwork and collaboration skills
Ability to lift approximately 30 lbs. regularly throughout the day

Job Responsibility

Pick raw materials and components for cleanroom compounding
Perform in-process checks to ensure 100% accuracy
Maintain communication with cleanrooms and Production Specialist(s) to ensure efficient production flow
Perform component sanitization for all items entering cleanrooms
Perform final inspection and label batch units
Maintain coordination with Production Specialist(s) and Pharmacists to ensure delivery times are met
Put together boxes and prepare finished products for shipment
Manually load and transfer products between pharmacy areas
Assist and perform other duties as required

Fulltime

New

Manager/Sr. Manager, Manufacturing Engineering

Location

United States , San Diego

Salary:

110250.00 - 165375.00 USD / Year

ASML

Expiration Date

Until further notice

Requirements

Bachelor's degree in Manufacturing, Industrial, Mechanical, Electrical, or related engineering discipline
Minimum 8 years of experience in a manufacturing, production, or engineering environment
Minimum 2 years of experience leading or managing engineering teams
Experience working in cleanroom or factory environments highly preferred
Strong background in manufacturing engineering, process development, and industrialization
Experience with Lean Manufacturing concepts and continuous improvement methodologies
Ability to analyze and communicate complex technical and operational data effectively

Job Responsibility

Lead and develop a Manufacturing Engineering organization responsible for production support, process development, and continuous improvement
Ensure employee safety in collaboration with Environmental Health & Safety (EHS) and foster a strong safety culture
Secure factory output by ensuring stable, capable manufacturing processes and timely resolution of production issues
Drive manufacturing readiness and industrialization for new products in a concurrent engineering environment
Develop and execute cost-reduction and productivity roadmaps for new and existing products
Lead the definition, creation, and maintenance of manufacturing procedures, specifications, tooling, and qualification equipment
Oversee troubleshooting and resolution of complex electro-mechanical production issues and supplier failure analysis
Partner cross-functionally with Development & Engineering, R&D, Supply Chain, Quality, and Customer Support teams
Implement best practices in the areas of lean manufacturing, project management, and manufacturing technologies
Manage departmental budgets, capital investment planning, and long-term financial plans

What we offer

medical
dental
vision
basic life insurance
401k plan
eight (8) hours of vacation leave every month
(13) paid holidays throughout the calendar year

Fulltime

Select Country

Cleanroom Operator

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?