Civil Engineer – Construction Job at Unilever (Hyderabad)

Job Description

Deliver end-to-end site execution for civil and structural works, ensure green building compliance, and support water/wastewater treatment infrastructure construction—meeting safety, quality, cost, and schedule targets.

Job Responsibility

Deliver end-to-end site execution for civil and structural works, ensure green building compliance, and support water/wastewater treatment infrastructure construction—meeting safety, quality, cost, and schedule targets
Supervise execution of earthworks, foundations, PCC/RCC/structural steel, masonry, flooring, waterproofing, paving, and drains as per approved drawings and method statements
Review IFC drawings, manage RFIs, deviations, and redlines
coordinate with design/PMC for constructability and field changes
Ensure compliance with applicable codes and client specifications
Conduct bar bending schedule (BBS) checks, rebar inspections, shuttering/formwork checks, concrete pour approvals, slump and cube tests
Complete Ground level planning in PEB errections schedules and Monitor the quality of executions
Monitor structural steel fabrication/erection (fit-up, welding, bolting, NDT, alignment)
Interface planning with MEP/utilities to avoid clashes
coordinate underground services and civil inserts/sleeves
Lead daily toolbox meetings
plan manpower, machinery, and material requirements
Implement sustainability goals (IGBC/LEED/GRIHA targets): site waste management, material submittals (recycled content, low-VOC), erosion/sedimentation control, heat island mitigation, and water/energy efficiency measures
Maintain documentation for credits: delivery challans, product certificates, environmental declarations, and commissioning logs
Support envelope performance, daylighting, and indoor air quality compliance during construction
Coordinate third-party commissioning (Cx), blower door/airtightness tests (if applicable), and OPR/BOD alignment
Execute civil works for intake structures, equalization tanks, clarifiers, aeration basins, MBR/SBR/ASP units, filter houses, chemical rooms, sludge handling, and associated pipe galleries/channels
Coordinate with process/mechanical vendors on equipment foundation levels, anchor bolts, grout pockets, embed plates, and trench layouts
Ensure waterproofing, crack control, leak testing (hydrostatic), joint treatment, and chemical resistance specifications
Support process commissioning readiness: gravity flow levels, weirs, scum baffles, penstocks, and access/maintenance clearances
Integrate rainwater harvesting/zero liquid discharge (ZLD) or reuse systems where applicable
Enforce site HSE: PTW, WAH, LOTO, scaffolding, excavation shoring, confined space, lifting plans, and housekeeping
Prepare ITPs/QAPs
ensure inspection hold points and third-party/NABL testing
NCR/CAR management
root cause analysis and corrective/preventive actions
Maintain safety/quality KPIs and incident reporting
Provide inputs to project schedule (WBS), daily/weekly progress tracking, micro-planning, and look-aheads
Joint measurements, DPR/MPR, reconciliation (cement, steel, concrete), and productivity tracking
Support subcontractor management, rate analysis, RA bills, change orders/claims, and BOQ verifications
Coordinate with client/PMC, consultants, vendors, utility agencies, local authorities, and auditors
Assist in compliance with construction permits, environmental approvals, and factory/local body norms
Attend progress/coordination meetings
present site status and risk/mitigation plans
Maintain site logs, test records, pour cards, inspection reports, method statements, and as-built drawings
Use BIM/3D models (if available) for clash detection/quantities
leverage digital tools for snagging, RFIs, and progress tracking
Timely Verification of the site Billings to have right cash flow and maintaining all the data of the GRN and Billing Data

Requirements

B.E./B.Tech in Civil Engineering
5–10 years in industrial/commercial construction
at least one project involving water/wastewater treatment
at least one green building–certified or targeted project (IGBC/LEED/GRIHA)
Working knowledge of IS codes, NBC 2016, IS 456, IS 800, IS 875, IS 3370 (liquid retaining), welding/NDT basics, relevant environmental and wastewater guidelines
Proficiency in AutoCAD, MS Project/Primavera, MS Excel, BIM (Navisworks/Revit preferred), QA/QC digital tools, surveying (Total Station) basics
Strong site execution leadership and contractor management
Reading/interpreting drawings, BBS, and shop drawings
Concrete technology, waterproofing systems, and structural steel erection know-how
Understanding of wastewater process layouts, levels, watertight structures, and corrosion protection
Sustainability mindset
ability to maintain credit documentation and enforce low-VOC, waste segregation, and energy-water efficiency measures
HSE-first behavior
incident prevention and risk assessment
Commercial awareness: measurements, reconciliation, and change control
Clear communication, stakeholder handling, and problem-solving

Nice to have

First Aid/Fire Safety
Scaffolding Inspector (desired)
Concrete/steel QA certifications (e.g., NDT Level II for relevant personnel is a plus)

Unilever - All Job Offers

Select Country

Civil Engineer – Construction

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?

Civil Engineer – Construction

Civil Engineer - Construction Services Focus

Civil construction engineer – site manager

Manager EHV – Construction Site Engineer (Civil)

Civil Engineer in Road Construction

Resident Engineer (Civil Engineer) - Transit Division

Resident Engineer (Civil Engineer)

Civil Resident Engineer - Civil Site Supervisor

Project Engineer - Site Civil Engineer

Our AI answers in your language