Circuit Manager Job at Chickasaw Nation Industries, Inc (CNI) (Fort Belvoir)

Circuit Manager

The Circuits Manager supports the agency by providing staff supervision and mana...

Location

United States , Fort Belvoir

Salary:

Not provided

Chickasaw Nation Industries, Inc (CNI)

Expiration Date

Until further notice

Requirements

Must possess an active Top Secret (TS) clearance at the time of proposal and be able to attain Sensitive Compartmented Information (SCI) access
Must be willing to undergo and pass a Counterintelligence Polygraph (CI Poly)
Must be a U.S. Citizen
Must possess or be able to complete the DISA CONUS Telecommunications Seminar and the DISN Services Training Course
Must be familiar with DISA Circulars and DISA Storefront
Strong written and oral communication skills to effectively interface with military officials, managers, and subordinates
Proficiency in telecommunications systems planning and bandwidth optimization
Ability to manage complex databases for circuit tracking and cost analysis
Knowledge of DA PAM 25-5 and long-haul information transfer services
Bachelor’s degree in computer science or a related field and at least five (5) years’ technical experience in IT management/processes and two (2) years’ experience with large-scale enterprise/global networks

Job Responsibility

Evaluates current bandwidth requirements to determine cost-effective bundling of circuits using satellite and terrestrial methods
Provides Telecommunication Service Requests (TSR), Telecommunication Service Orders (TSO), and Ready For Use (RFU) reports to management
Maintains the circuit database to ensure individual communications circuit costs are current and daily circuit allocations are accurate
Coordinates testing and activations for all new circuits and provides regular updates on all circuit requests
Maintains a database of circuit diagrams, equipment configurations, and vital contact information needed to document each supported network
Recommends new and existing circuits for alternative routing to balance loading between Transport Network Control Centers
Supports acceptance testing of installed systems/circuits and manages the "cutover" of systems to an operational state

What we offer

Medical
Dental
Vision
Company Life Insurance
Short-Term and Long-Term Disability Insurance
401(K) Immediate Vesting
Professional Development Assistance
Legal Aid Assistance Program
Family Planning / Fertility Assistance
Personal Time Off

Fulltime

Electronics Maintenance Technician II

The Electronics Maintenance Technician II (Tech II) supports maintenance, repair...

Location

USA , Fairbanks

Salary:

41.57 USD / Hour

Arcata Associates, Inc

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
technical training in electronics required
2-4 years of experience in electronics maintenance, repair, or operations
Familiarity with Radar and High-Power transmitters or similar systems preferred
Ability to interpret manufacturers' manuals, schematics, and technical documentation to solve routine problems
Proficiency with electronic test equipment, including spectrum analyzers, multi-meters, oscilloscopes, and signal generators
Strong understanding of AC/DC circuit interrelationships and judgment in planning work sequences
Ability to follow Air Force TOs and OEM standards
Strong communication and teamwork skills
Eligible for DoD security clearance

Job Responsibility

Perform maintenance activities including periodic, scheduled, unscheduled, and preventative maintenance following TOs and OEM documentation
Troubleshoot and resolve routine electronic issues using manufacturers' manuals and advanced technical knowledge
Replace components, wire circuits, and repair more complex electronic systems with limited supervision
Operate and prepare threat systems, including radars and supporting equipment, for training events, ensuring threat-faithful operations during JPARC missions
Use testing instruments such as spectrum analyzers, digital multi-meters, oscilloscopes, and signal generators to diagnose and verify system functionality
Plan work sequences, select appropriate tools, and ensure maintenance tasks are compliant with accepted practices
Maintain job completion logs and system reports
Track, manage, and maintain sufficient spares inventory to ensure operational readiness
Interface with Air Force depot systems to report on supported threat systems and ensure accurate status updates
Submit reports including Proposed Spare Parts Lists and Inventory/Utilization Data

What we offer

$6000 Annual Cold Weather Bonus

Fulltime

D&E - DUV IBE Electrical Design Engineer

Are you challenged by the engineering of high-tech semiconductor equipment produ...

Location

Taiwan , Linkou

Salary:

Not provided

ASML

Expiration Date

Until further notice

Requirements

Bachelor/ Master degree in Engineering with >5 years of working experience in technical areas and project management experience
Experienced in PCBA, rack, and cabinet design, including electro-mechanical engineering & integration, within multi-disciplinary engineering environments
Competent in developing equipment such as measurement tools, positioning systems, multi-disciplinary assemblies, and handling systems, while ensuring compliance with international standards and human/machine safety
Knowledgeable in digital and analog mixed-signal circuit design, covering integration, testing, and troubleshooting of advanced electronic systems
Being a generalist in your field of expertise, willing to dive into unknown problems and ability to operate in a multi-disciplinary team
Strong root‑cause analysis skills and the ability to drive solutions
Solid analytical thinking with a practical mindset
A collaborative attitude and the ability to work effectively across cultures
A proactive, hands‑on approach with a get‑things‑done mentality
Strong communication and interpersonal skills, with professionalism at all levels

Job Responsibility

Contribute to the development of the PAS5500 and XT1-2-3 product line by re-designing, creating and testing sub-systems, within the restrictions imposed on system specifications, costs and planning considerations
Manage the Development Projects (i.e.: solving EOL components & redesign of peripheral/ PCAs, supplier transfer) by co-working with Internal/External stakeholders and integrate the solutions into PAS5500 and XT1-2-3 systems
Since part of the actual design is outsourced, your tasks include to define requirements, review detailed designs and integration and qualification of functional performance on both part and (sub-) system level
Lead the electronic aspects related to repairs and refurbishment of PAS systems and trouble shooting, resulting in both quick fixes and structural solutions
Ensure Electrical development & quality within multidisciplinary teams: responsible for the electronic content on Architectural till component level ( PCBA’s, Cables, Sensors, Racks ,Cabinets, electronic components)
Support the Manufacturing and Customer Support organization to meet the output and quality requirements and high end trouble shooting
Introduce the Engineering Change to Manufacturing and Customer Support organization and also support the Supplier to meet the output and quality requirements
Responsible for the Technical Product Documentation using 3D modeling, BOM structures, archive in order to unambiguously explain the design to suppliers
Fulfill a technology bridging position between ASML headquarter, Taiwan & US as well as between the (new) suppliers in Asia and ASML

Fulltime

Agent CCTV

Patrol all areas of the property; assist guests with room access. Monitor Closed...

Location

Mauritania , Nouakchott

Salary:

Not provided

Marriott Bonvoy

Expiration Date

Until further notice

Requirements

High school diploma or G.E.D. equivalent
No related work experience
No supervisory experience

Job Responsibility

Patrol all areas of the property
assist guests with room access
Monitor Closed Circuit Televisions, perimeter alarm system, duress alarms, and fire life safety system
Lock property entrances when required
Conduct daily physical hazard inspections
Respond to accidents, contact EMS or administer first aid/CPR as required
Assist guests/employees during emergency situations
Notify appropriate individuals in the event of accidents, attacks, or other incidents
Defuse guest/employee disturbances
Call for outside assistance if necessary

Fulltime

Electrical Engineer, Journeyman

DCS has an exciting opportunity for an Electrical Engineer to support to the Air...

Location

United States , Ogden

Salary:

Not provided

DCS Corporation

Expiration Date

Until further notice

Requirements

Due to the sensitivity of customer related requirements, U.S. Citizenship is required
Must hold an active Secret clearance
Bachelor's Degree in a professional engineering discipline and at least 5 years of experience in the respective technical / professional discipline being performed, 3 of which must be in the DoD, OR 7+ years of directly related experience, 5 of which must be in the DoD
Experience and/or training in the following electrical engineering areas: Design, development, and circuit analysis
RF chain sub-specialties (antenna design, high power transmitters/amplifiers, receiver processing, etc.)
Electro-mechanical controls
Modeling and simulation
Test and evaluation
Technical data package development and sustainment
Principles of configuration management

Job Responsibility

Provide system engineering review and analysis of assigned systems throughout all acquisition phases, including conceptual, demonstration, validation, engineering, manufacturing development, production, deployment, and sustainment
Assist in translating DoD user requirements into system requirements for design, development, fabrication, testing, and evaluation of systems, subsystems, and equipment
Develop and refine features to improve, extend, or validate current methods, data, or techniques
Review overall system design baseline (architecture and interoperability) requirements
Assist in the development of system specifications and architecture products
Perform independent analysis of engineering changes, specifications, and vendor proposals, providing recommendations to Government points of contact
Support life cycle cost evaluations of proposed systems and components
Provide test and evaluation support, including planning, execution, and analysis, and participate in Integrated Test Teams, Test Readiness Reviews, and related program events
Schedule and secure test resources to meet program office objectives
Monitor and report on test and evaluation (T&E) activities across all systems

Fulltime

Industrial Controls Engineer

Location

United States , Florence

Salary:

Not provided

Applied Chemical Technology

Expiration Date

Until further notice

Requirements

Bachelors Degree in Electrical, Industrial or Controls Engineering
5+ years experience programming PLCs using Ladder Logic and Function Block and be familiar with various PLC brands such as Allen-Bradley, Siemens, etc.
5+ years experience designing process controls systems
3+ years experience with HMI and SCADA systems such as Factory Talk, PanelView, Wonderware, etc.
Mechanical Design and Troubleshooting experience a plus
Must be able to travel when needed, including international travel (not full-time travel)
Ability to design process electrical control circuits following NEC and UL508 guidelines
Ability to calibrate and troubleshoot electrical controls and instrumentation
Understanding of industrial controls network protocols
Possess a strong understanding of mechanical and electrical equipment and have the ability to use that understanding to troubleshoot systems

Job Responsibility

Report to assigned supervisor
Respect and adhere to all active contracts and confidentiality agreements with Applied Chemical Technology and associated clients
Respect and adhere to all safety rules procedures, and complete all necessary safety training
Work with project managers to assess client needs related to automation
Assist project managers in preparation of project bids and cost estimation
Provide engineering input to projects as required
Design control panels/systems to meet project requirements
Generate AutoCAD drawings/schematics for control system design
Build Electrical panels according to electrical schematics
Specify, purchase, and receive materials for control system fabrication

What we offer

medical
401K
leave
available after probationary period

Fulltime

Systems Design Engineer

WHAT YOU DO AT AMD CHANGES EVERYTHING At AMD, our mission is to build great prod...

Location

China , Shanghai

Salary:

Not provided

AMD

Expiration Date

Until further notice

Requirements

BS or above in Electrical/Electronic/Power Engineering, or related field
10+ years of hands-on experience in power hardware design, preferably for laptop platforms
Proficiency in mobile products, including battery technology/management, battery fuel gauge operation/calibration
Proficiency in charger, firmware-level settings for BIOS/UEFI and Embedded Controllers (EC)
Expertise in hardware power management, in-depth knowledge of System & SoC power states (ACPI, C-States, P-States) and low-power modes for peripherals (display, Wi-Fi, SSD, USB)
Proficiency in DC-DC converter topologies (buck, boost, multiphase), PWM controllers, MOSFET, and power stage
Experience with simulation tools (e.g., Simplis, SPICE, PowerDC, Ansys SIWave)
Strong knowledge of PCB layout considerations for power circuits (e.g., parasitic reduction)
PDN and PI analysis capability is a plus
Familiarity with lab equipment: oscilloscopes, spectrum analyzers, and power integrity test setups

Job Responsibility

Own the endtoend power architecture for x86 platforms (desktop, notebook, or server), spanning APU/CPU, memory, chipset, PCIe, and auxiliary power rails
Design, simulate, and optimize high-efficiency DC-DC power solutions for battery life and high-performance CPU/APU platforms
Schematic design, PCB layout reviews, and component selection to meet power delivery requirement (e.g., voltage ripple, transient response, efficiency etc.)
Collaborate with cross-functional teams (Arch, EE, thermal, layout, SI/PI etc.) to delivery motherboard reference board on time
Conduct PDN(power delivery network) simulation and analysis, ensure power integrity
Handle system-level power optimization, from platform hardware (SoC, display, WIFI, SSD, charger, connectivity etc.) to firmware (BIOS/UEFI, EC), ensuring superior battery life
Perform fullstack idle power breakdown, measurement, and bottleneck identification
Own batterylife KPI improvements across platform/silicon / firmware / system layers
Improve VR/PDN lightload efficiency and cooperate with power architecture teams
Drive display idle power optimization through PSR, DCN, refreshrate and driver improvements

Fulltime

Electrical Engineer

Trenton is hiring an Electrical Engineer to support the design, development and ...

Location

United States , Duluth

Salary:

Not provided

Trenton Systems

Expiration Date

Until further notice

Requirements

BSEE or equivalent
5-8 years of experience in electrical design or related field
Strong problem-solving skills and attention to detail
Familiarity with hardware and software programming tools
Ability to read and create schematics, bill of materials, PCB layout and manufacturing drawings
Strong ability to solder surface mount components
Communicate with suppliers and field application engineers of Trenton’s industrial partners
Communication with both manufacturing and engineering teams
Strong knowledge of Microsoft office products and collaboration software.

Job Responsibility

Assist in the design and development of printed circuit boards, including selecting components, creating schematics and layout design
Create test documentation and perform tests at the component level and system level
Evaluate and resolve problems during initial board bring up and during NPI manufacturing
Support the manufacturing team by providing technical assistance and resolving issues related to electrical designs
Integrate third-party subsystems, including COTS power supplies, third-party motherboards, GPUs, and I/O cards such as network and storage
Collaborate with cross-functional teams, including mechanical, software, and test engineers, to ensure seamless integration of designs
Communicate with employees and supplier representatives in remote offices
Participate in design reviews and provide input to improve design processes and product quality
Support the engineering manager as necessary with special projects

Fulltime

Select Country

Circuit Manager

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?

Circuit Manager

Circuit Manager

Electronics Maintenance Technician II

D&E - DUV IBE Electrical Design Engineer

Agent CCTV

Electrical Engineer, Journeyman

Industrial Controls Engineer

Systems Design Engineer

Electrical Engineer

Our AI answers in your language