Cfd Engineer Aerodynamics Job at Randstad (Shanghai)

Sr. Aerodynamics Engineer, Modeling and Simulation

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

150000.00 - 190000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

BS / MS / PhD in Aerospace Engineering or a related field
4+ years of experience with BS, or 3+ years of experience with MS, or 1+ years of experience with PhD modeling rotorcraft, tiltrotor, eVTOL aerodynamics at full-vehicle level
Strong understanding of fundamentals of fixed-wing and rotorcraft aerodynamics, performance, stability & control
Experience in eVTOL and/or multicopter vehicle aerodynamics design and analysis, including 6 DoF vehicle trimming and trajectory optimization
Experience with gradient-based and gradient-free optimization techniques
Experience with surrogate modeling techniques (like Kriging methods) and statistical analysis
Experience with experimental data processing and reduction techniques
Proficiency in Python programming
Experience with software development, object-oriented, version control best practices, as well as Git, CICD, Conda
Excellent work planning and issue resolution skills

Job Responsibility

Perform low/mid/high fidelity aerodynamic simulations of Archer eVTOL aircraft
Develop linear/non-linear aerodynamic models to predict aircraft behavior and performance throughout the flight envelope
Analyze experimental data (either from flight test or wind tunnel) to identify sources of model errors, validate, and improve aerodynamic models of the vehicle
Develop efficient methods to feed flight test data back into aerodynamic simulation models of various fidelity and complexity
Contribute to the development of Archer aerodynamic software stack, improving methods and workflows
Coordinate with other cross-functional teams and pilots for flight simulator aerodynamic modeling updates and issue resolution

Fulltime

Senior Aerodynamics Modeling and Optimization Engineer

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

Not provided

Archer Aviation

Expiration Date

Until further notice

Requirements

BS / MS / PhD in Aerospace Engineering or a related field
4+ years of experience with BS, or 3+ years of experience with MS, or 1+ years of experience with PhD modeling rotorcraft, tiltrotor, eVTOL aerodynamics at full-vehicle level
Strong understanding of fundamentals of fixed-wing and rotorcraft aerodynamics, performance, stability & control
Experience in eVTOL and/or multicopter vehicle aerodynamics design and analysis, including 6 DoF vehicle trimming and trajectory optimization
Experience with gradient-based and gradient-free optimization techniques
Experience with surrogate modeling techniques (like Kriging methods) and statistical analysis
Experience with experimental data processing and reduction techniques
Proficiency in Python programming
Experience with software development, object-oriented, version control best practices, as well as Git, CICD, Conda
Excellent work planning and issue resolution skills

Job Responsibility

Perform low/mid/high fidelity aerodynamic simulations of Archer eVTOL aircraft
Develop linear/non-linear aerodynamic models to predict aircraft behavior and performance throughout the flight envelope
Analyze experimental data (either from flight test or wind tunnel) to identify sources of model errors, validate, and improve aerodynamic models of the vehicle
Develop efficient methods to feed flight test data back into aerodynamic simulation models of various fidelity and complexity
Contribute to the development of Archer aerodynamic software stack, improving methods and workflows
Coordinate with other cross-functional teams and pilots for flight simulator aerodynamic modeling updates and issue resolution

Fulltime

Sr. CFD Engineer, Fixed-Wing

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

Not provided

Archer Aviation

Expiration Date

Until further notice

Requirements

BS / MS / PhD in Aeronautics Engineering or related fields
5+ years of experience with BS, or 3+ years of experience with MS, or 2 years of experience with PhD modeling rotorcraft, tiltrotor, eVTOL aerodynamics with CFD
Strong understanding of fixed-wing and rotorcraft aerodynamics
Strong theoretical background in fluid mechanics and CFD
Experience in aerodynamic design and shape optimization
Experience with surface parametrization and aerodynamic shape optimization
Experience in modeling turbulent flows, boundary layer transition, unsteady and interactional aerodynamic phenomena
Experience with steady and unsteady RANS
Experience with NASA Overflow CFD software required
Proficiency in meshing 3D surface & volume meshing utilizing structured overset meshes and/or unstructured tetrahedral/hexahedral meshes

Job Responsibility

Perform aerodynamic design and simulations of Archer eVTOL aircraft using CFD
Run aerodynamic shape optimizations of different components of Archer vehicles
Develop and maintain high-fidelity models of Archer eVTOL aircraft
Loft high quality surfaces for OML definition
Correlate and validate CFD simulation results with lower-fidelity simulations, flight test data, and wind tunnel experiments
Support vehicle aerodynamic design through all phases of the project, from conceptual design to certification

Fulltime

Senior Product Design Engineer - Aero Specialist

Skydio’s mechanical systems are the backbone of reliable autonomous flight. An i...

Location

United States , San Mateo, California

Salary:

140000.00 - 225000.00 USD / Year

Skydio

Expiration Date

Until further notice

Requirements

5+ years of prior product development experience with a proven track record of execution, enthusiasm, and collaboration
Experience using reduced order aircraft performance and control modeling such as vortex lattice or lifting line methods (e.g. AVL, VSPAERO) to quickly iterate on conceptual designs
Experience performing end-to-end CFD analyses using Navier–Stokes–based solvers (e.g., ANSYS Fluent, STAR-CCM+, OpenFOAM, Cart3D, Chimera, FUN3D, or OVERFLOW), including mesh generation, solver setup, and post-processing with visualization tools
Skilled in data visualization and analysis of CFD, wind tunnel, and/or flight test data using Python, Tecplot, ParaView, or similar tools to effectively communicate aerodynamic performance and key design insights
Proficiency with aerodynamic modeling tools, such as panel methods, vortex lattice, lifting line, or particle-based approaches, for aerodynamic analysis and conceptual design
Hands-on experience with wind tunnel testing, including model design, test planning and execution, instrumentation setup, data acquisition, reduction, and analysis of discrepancies
Bachelor's degree or higher in aerospace or mechanical engineering or equivalent with demonstrated academic excellence
Ability to apply analytical problem solving skills and engineering fundamentals to create high-quality designs for a sophisticated vehicle system
A strategic mind across the full design, source, build, validate, and ship process. Proven ability to make considered decisions at various stages

Job Responsibility

Play a key role in the design of Skydio aircraft by performing aerodynamic analysis and simulation and designing/executing experiments, and doing concept and detailed design of systems and components with key aerodynamic considerations
Build and analyze aerodynamic models to determine flight envelopes and predict vehicle dynamics
Design/run experiments, review flight test logs, and examine data to validate simulations and refine the aerodynamic models and performance of our aircrafts
Collaborate closely with cross functional teams (structures, controls, hardware engineering) to guide design and integration decisions
Partner with the Flight Test Team in the development of test plans and post-flight data analysis
Collaborate with thermal engineers to design and refine integrated thermal solutions for vehicle systems
Execute low/mid/high-fidelity CFD analyses to assess aerodynamic and mechanical design characteristics and predict aircraft performance and stability
Have ownership over the aerodynamic design of our aircrafts and key accessories from the ground-up
Collaborate closely with mechanical and propulsion engineers to shape and integrate optimizations into new and existing architecture

What we offer

Equity in the form of stock options
Comprehensive benefits packages
Relocation assistance may also be provided for eligible roles
Group health insurance plans
Paid vacation time
Sick leave
Holiday pay
401K savings plan

Fulltime

Sr Hardware Analysis Engineer-Aero/Acoustic

Figure is an AI robotics company developing autonomous general-purpose humanoid ...

Location

United States , San Jose

Salary:

170000.00 - 200000.00 USD / Year

Figure

Expiration Date

Until further notice

Requirements

Expert knowledge of fluid dynamics, heat transfer and acoustic
Extensive experience in fan design and optimization, including impeller geometry, ducting, and flow-path refinement
Expert in CFD modeling tools (Star-CCM+, Ansys Fluent, or OpenFOAM)
Solid understanding of numerical modeling concepts

Job Responsibility

Lead CFD simulations for all active cooling systems
Design and optimize fans, heat sinks and flow paths for maximum efficiency and acoustic quality
Perform aeroacoustic modeling and NVH analysis to minimize noise and vibration
Build and validate CFD models for steady-state and transient flow simulations, and correlate these models through wind tunnel, bench, and acoustic chamber testing to improve prediction accuracy

Fulltime

Aeromechanical Engineer 2

The Aeromechanical Engineer II is responsible for the design, test, build, and i...

Location

United States , Tampa

Salary:

Not provided

AEVEX Aerospace

Expiration Date

Until further notice

Requirements

Proficiency in CAD software, such as SolidWorks or CATIA
Experience with Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD)
Strong knowledge of materials, manufacturing processes, and quality control procedures
Excellent communication and collaboration skills, with the ability to work effectively in a team environment
Familiarity with 3D printing technologies
Understanding of regulatory and industry standards, such as FAA regulations, AS9100, and ISO 9001
Bachelor's degree in Aerospace, Aeronautical, Mechanical Engineering or a related field
Master's degree in Aerospace, Aeronautical, Mechanical Engineering, Engineering or a related field is preferred
Solidworks Certified Professional in Mechanical Design (CSWP) is a plus
3-6 years of experience in aerospace or a related industry

Job Responsibility

Use Solidworks to design and modify parts and assemblies
Create 2D drawings of parts and assemblies complete with bill of material (BOM) for internal or external fabrication and assembly
Perform aerodynamic analysis and calculations to inform the design and predict the behavior of aircraft
Conduct simulations, testing, and prototyping to validate designs and ensure they meet performance and safety requirements
Collaborate with cross-functional teams, including manufacturing, electrical, software, and systems engineers, to integrate mechanical systems into larger aerospace systems
Perform risk assessments and develop mitigation strategies for potential mechanical failures
Maintain accurate documentation of designs, processes, and test results
Design and oversee the manufacturing and assembly processes of mechanical components, ensuring they meet quality and performance standards
Perform other duties as assigned
Regular and reliable attendance on a full-time basis [or in accordance with posted schedule]

What we offer

401(k)-retirement plan
comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company
professional development funds
Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support

Fulltime

Aeromechanical Engineer 3

The Aeromechanical Engineer 3 is responsible for the design, test, build, and im...

Location

United States , Tampa

Salary:

Not provided

AEVEX Aerospace

Expiration Date

Until further notice

Requirements

Active Top Secret DoD Clearance preferred
U.S. Citizenship required
Proficiency in CAD software, such as SolidWorks or CATIA
Experience with Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD)
Strong knowledge of materials, manufacturing processes, and quality control procedures
Understanding of regulatory and industry standards, such as FAA regulations, AS9100, and ISO 9001
Excellent communication and collaboration skills
Familiarity with 3D printing technologies
Bachelor's degree in Aerospace, Aeronautical, Mechanical Engineering or a related field
4-8 years of experience in aerospace or related field

Job Responsibility

Use SolidWorks to design and modify parts and assemblies
Create 2D drawings of parts and assemblies complete with bill of material (BOM) for internal or external fabrication and assembly
Perform aerodynamic analysis and calculations to inform the design and predict the behavior of aircraft
Develop and analyze mechanical systems for aircraft, including engines, airframes, and avionics
Conduct simulations, testing, and prototyping to validate designs and ensure they meet performance and safety requirements
Collaborate with cross-functional teams, including electrical, software, and systems engineers, to integrate mechanical systems into larger aerospace systems
Perform risk assessments and develop mitigation strategies for potential mechanical failures
Design and oversee the manufacturing and assembly processes of mechanical components, ensuring they meet quality and performance standards
Maintain accurate documentation of designs, processes, and test results
Perform other duties as assigned

What we offer

401(k)-retirement plan
comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company
professional development funds
an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support

Fulltime

New

Contracts & Rights Coordinator

The Contracts & Rights Coordinators support the Media & Entertainment Content te...

Location

United Kingdom , Leeds

Salary:

30000.00 - 37500.00 GBP / Year

ITV

Expiration Date

January 29, 2026

Requirements

Excellent attention to detail is essential
Strong and effective communication, interpersonal and influencing skills and an ability to build successful working relationships at all levels is a must
Ability to effectively manage competing priorities with a customer service approach
delivers quality even when reacting to changing circumstances
able to monitor own work to ensure it reaches successful completion
and plans ahead, anticipating potential problems
Contracts and data management experience is preferred
ideally in a media and/or legal environment
Ability to develop existing processes to meet the changing needs of the business and to continuously improve and develop understanding of new and innovative technologies
Proficient in using Google Suite e.g. Gmail, Sheets & Docs, Microsoft Office e.g. Excel and Word and workflow tools, such as Trello, Jira

Job Responsibility

Support in the end-to-end process from internal sign-off, preparing and issuing initial drafts of agreements and issuing signature copies of contracts and arranging for prompt signature
Ensure the timely and accurate input, update and maintenance of contracts and rights data into ITV’s systems to reflect new information and to apply updates to existing information
To act as a point of contact for all aspects of contracts and rights queries (internal & external), such as copyright clearance, underlying rights queries, industry and regulatory legislation, terms of trade, talent union and music agreements
Provide accurate and timely visibility of rights availability, including clearance and cost information, across the Media & Entertainment division
Build and maintain relationships with all internal stakeholders and external suppliers, managing enquiries with a first class customer service led approach
Support on ad-hoc projects as they arise and co-ordinate such projects across the Legal & Business Affairs team or ITV as required

What we offer

Flexible working with a range of options
Generous holiday allowance, plus you can buy more
Annual bonus opportunity
Competitive pension contribution
Save as you earn - with an opportunity to buy ITV shares
Wellbeing and volunteering days plus a wide range of opportunities to help you live a balanced and healthy life

Fulltime

Cfd Engineer Aerodynamics

Randstad

Location:
China , Shanghai

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
January 16, 2026

Expiration:
February 23, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Cfd Engineer Aerodynamics

Sr. Aerodynamics Engineer, Modeling and Simulation