Cell Operator Job at Symbotic (Joliet)

Cell Operator

Symbotic is seeking a Cell Operator, you will be responsible for system upkeep a...

Location

United States , Manchester

Salary:

21.00 - 24.00 USD / Hour

Symbotic

Expiration Date

Until further notice

Requirements

Associate degree or equivalent experience or certification in electronics, automotive, automation, manufacturing or equivalent field preferred
A minimum of 1 year of experience with mechanical automation systems, educational or training equivalent
Be proficient in performing all System Inspection functions including: cleaning, lubrication, tolerance checking, current measurements, and checking electrical systems
Ability to prioritize work to gain maximum uptime and throughput from an automated cell
Demonstrates commitment and ability to work safely
Ability to work independently of supervisor following procedures and manuals
Ability to Multi-task and perform multiple job functions at once

Job Responsibility

Perform pre-production checks on automated adapters ensuring equipment is in ‘ready to run’ state
Process and monitor the flow of the automated storage and retrieval system, through means of the adapters, including manual inbound, automatic inbound, automatic outbound, to achieve maximum throughput and cases per hour
Prepare pallets for induction into the Symbotic storage and retrieval system
Assess cause of system stoppage and return to service using Human/Machine Interface (HMI) and manual intervention
Communicate and escalate all issues impacting production immediately to operational leadership
Contribute to overall system uptime through system preservation, robot recovery, suspect removal, and bot health actions
Perform periodic system inspections including cleaning, lubrication, tolerance checking, component validation
Report all out of spec conditions and perform root cause corrective action and maintain continuous operation of system components
Monitor and utilize common radio etiquette while obtaining instructions from leadership and operational leads
Perform rover bot upkeep to include, but not limited to, replacing wheels, cleaning, ESD brushes, sensors, etc

What we offer

medical
dental
vision
disability
401K
PTO

Fulltime

Aircraft Documentation Controller

The role of the Documentation Controller position will form part of a Maintenanc...

Location

United Kingdom , Odiham

Salary:

Not provided

Morson Talent

Expiration Date

Until further notice

Requirements

Good communication skills
Ability to control demanding workloads whilst delivering to a high standard and maintaining schedule
Capable of understanding and interpreting technical documents and associated publications
Working knowledge of MAA Regulatory Articles (RA), MAA Regulatory Publication (MRP) Part 145, aviation Quality Assurance (QA) and Safety Management System (SMS) and the application of these requirements within their area of responsibility, accountability and authority (RAA)
Proven experience as part of a Continuing Airworthiness Management Organisation
Previous experience within an aircraft operating environment with specific knowledge of Maintenance Planning and Documentation Control
GOLDesp experience essential, preferably Level S3 minimum with the ability to gain level S5
Aircraft MoD Form 700 Knowledge essential

Job Responsibility

Auditing, updating and delivery of aircraft and component maintenance records in both electronic and hard copy formats which comply to all MAA regulations and meet the customer requirements as directed
Provide direct Support to Maintenance, repair & Modification Teams
Provide all Technical documentation and instructions for the aircraft/component
Update/management of GOLDesp at Custodian level
Operate GOLDesp at Boundary Cell level
Update, management and auditing of MoD Form 700
Coordinates with customers to ensure the resolution of any post product delivery queries
Coordinates with internal and external support functions
Mitigate immediate risks including ‘stop work’ as well as escalate emerging risks, issues and shortfalls in a timely manner
Contribute positively to our open and honest reporting culture

Fulltime

MSAT Process Engineer

As part of the MSAT team—the scientific backbone of our organization—you’ll brid...

Location

Belgium , Woluwé-Saint-Lambert

Salary:

Not provided

Randstad

Expiration Date

July 04, 2026

Requirements

PhD or Master's degree in Life Sciences
A minimum of 3 years of relevant experience for PhD holders, or 5 years for Master's degree holders, in process development or MSAT-like roles
Hands-on experience with mammalian cell culture processes at laboratory and/or manufacturing scale
Familiarity with downstream purification processes is considered a distinct advantage
A solid understanding of current Good Manufacturing Practices (cGMP)
prior experience working in a GMP environment is highly an asset
Familiarity with statistical and data trending techniques
Experience with analytical software tools such as JMP, Statistica, MATLAB, or SIMCA is preferred
Fluent in oral and written English
Willingness to adapt to dynamic work demands, including occasional evening or weekend shifts, and the flexibility to support both small-scale lab studies and manufacturing-scale operations

Job Responsibility

Support the introduction of new drug substance manufacturing processes by facilitating technology transfers from development laboratories to large-scale GMP manufacturing facilities
Ensure documentation readiness for clinical batch production, including conducting process fit-gap analyses, defining process control strategies, and preparing media batch sheets and sampling plans
Provide on-the-floor and technical support during process performance qualification (PPQ) to successfully implement new processes at a manufacturing scale
Identify and lead process improvement initiatives aimed at increasing yield or process robustness, and generate supportive data packages to enable successful implementation at scale
Provide ongoing support for existing commercial manufacturing processes through data trending and monitoring
Develop scientific and technical study protocols and reports to support significant process changes
Contribute to complex investigations and process/product impact assessments for significant manufacturing deviations

Fulltime

!

Global Head of Business Development

I’m hiring for a Head of Business Development to join a growing EU-based Biologi...

Location

European Union

Salary:

Not provided

Life Science Talent

Expiration Date

Until further notice

Requirements

Senior business development experience within a Biopharma CDMO
Strong track record of winning biotech and pharma customers internationally
Good understanding of biologics, advanced therapies, viral vectors, plasmid DNA, cell therapy, GMP manufacturing, or similar services
Ability to manage complex, technical, high-value sales cycles
Commercial maturity, strategic thinking, and the ability to operate at executive level

Job Responsibility

Leading global business development across biotech and pharma customers
Building senior-level relationships with CMC, technical, operational, and executive stakeholders
Identifying, developing, and closing strategic CDMO opportunities
Positioning complex services across biologics, advanced therapies, GMP manufacturing, and related areas
Working closely with internal technical, quality, operations, and leadership teams to turn opportunities into long-term partnerships

Electronic Technician II

The Electronic Technician II (Maintenance) is responsible for support of highly ...

Location

United States , Andrews AFM

Salary:

47.68 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

Minimum of a high school diploma or GED
Working knowledge of electrical and environmental system repair procedures
Working knowledge of procedures for handling and disposal of hazardous waste materials
Ability to read, write, speak and understand English
Ability to read and interpret data and wiring diagrams
Meet physical requirements, occasional lifting of objects weighing up to 50 pounds
Possess FAA Airframe license
Ability to obtain and maintain a secret security clearance
US Citizenship required to obtain the clearance
Ability to obtain and maintain a flightline driver's license

Job Responsibility

Accomplishes organization and intermediate level maintenance on electrical and environmental systems components installed on Boeing and Gulf Stream aircraft
Performs scheduled maintenance on Liquid Oxygen Carts (LOX) and Gaseous Oxygen carts (GOX), ground service Air Purge Units, shop Air Compressors, and Fuel Cell Explosion Proof Drop Lights
Services and maintains Rotor Wing, Fixed Wing, aerospace ground support equipment batteries
Coordinates with Base CE through TRIRIGGA on any issues concerning battery storage areas
Assist in the training and direction of assigned personnel
Coordinates the maintenance efforts with the Production Supervisors and Maintenance Operation Coordination Center
Uses and inputs data in Maintenance Information System programs
Ensures compliance with applicable safety, housekeeping, tool control, and FOD prevention programs
Shall perform other duties as assigned, to include TDY and travel
Receives cross-utilization training and is qualified to perform maintenance tasks associated within classification

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Test & Validation Technician

At Instagrid, you are part of the clean-tech revolution by bringing pure energy ...

Location

Germany , Ludwigsburg

Salary:

Not provided

Instagrid

Expiration Date

Until further notice

Requirements

Completed technical qualification or degree in electrical engineering, mechatronics, or a comparable field
Hands-on experience in testing, measurement technology, or laboratory environments
Familiarity with battery test equipment, data acquisition systems, and common measurement tools
Experience with lithium-ion battery systems is an advantage
a keen interest in battery technology and a willingness to develop expertise in this area are essential
Proficiency in English is required
German language skills are a plus

Job Responsibility

Test and validate lithium-ion cells, modules, and complete battery systems according to defined test plans and industry standards
Set up and execute electrical, mechanical, and environmental tests to verify performance, safety, and reliability
Document test procedures, measurement data, and results in a structured and traceable manner
Maintain, calibrate, and further develop laboratory equipment and test infrastructure to ensure reliable and safe operation
Contribute to the setup and expansion of the battery test laboratory, including assisting in the procurement and commissioning of new test equipment
Support the continuous improvement of test methods and validation processes in close collaboration with engineering and product teams

What we offer

Flexible work schedule
30 vacation days plus 5 special leave days and 5 baby leave days
Urban Sports Club membership subsidy
Discounts on sustainable online shops
The opportunity to work in a company at the forefront of innovation
Free choice of operating system (MacOS or Windows)

SMT Technician II

The SMT Technician II position is responsible for monitoring, evaluating, report...

Location

United States , Tampa

Salary:

Not provided

Sypris Electronics

Expiration Date

Until further notice

Requirements

Associates degree or vocational certificate in a technical program or the equivalent combination of education and experience
Minimum three years of experience
IPC-A-610 and J-STD-001 certifications, or ability to obtain within the first 60 days
Knowledge of the use of mechanical hand tools, soldering equipment
Ability to interpret layouts
Understanding of material and component types, styles, symbols and color codes
Skilled in problem solving techniques and methods (process, product, procedure)
Experience with continuous improvement, Lean manufacturing preferred
Working knowledge of electronics, pneumatics, hydraulics and mechanical operations/systems
May require handling or exposure to chemicals used in the production area

Job Responsibility

Assists in maintaining equipment including cleaning, lubrication, minor repairs and adjustments, programming and determining appropriate action for mechanical, electrical pneumatic and hydraulic equipment failures
Operates and troubleshoots SMT equipment to include printer, adhesive station, chip shooter, pick & place, reflow oven, X-Ray, wash, AOI unit, paste height and measurement
Assists with compilation and analysis of cell board product yield and supports engineering continuous improvement efforts
Accurately enters data associated with the SMT process
Monitors and improves SMT line process activities
Interfaces with engineering to incorporate changes and cost savings
Reads and interprets electronic assembly drawings, layouts, Bills of Materials (BOMs), Standard Operating Details (SODs) and ISO Procedures
Supports production delivery requirements, by developing and reviewing visual control charts, and assisting continuous improvement efforts
Identifies root cause, and systematically solves issues on equipment and end product, aiding engineers, other technicians, and operators
Ensures that equipment complies with departmental and company standards

What we offer

Health insurance
Dental insurance
Vision insurance
Life insurance
Disability insurance
401(k) with company matching
9/80 work schedule

Fulltime

Transportation Driver

The Transportation Driver is responsible for the direct transportation of PACE p...

Location

United States , Winchester

Salary:

21.00 USD / Hour

Blue Ridge Hospice

Expiration Date

Until further notice

Requirements

High school diploma required
Must have an active and up-to-date certification in CPR
A minimum of one-year experience in working with the frail or elderly population
Must have medical clearance for communicable diseases and up-to-date immunizations before having direct participant contact
Must be able to clear Background Check, Motor Vehicle Record (MVR) and Drug Screen
Must have a valid driver's license, proof of insurance and have means of transportation

Job Responsibility

Responsible for the centers passengers during transport, providing care in a manner which ensures participant satisfaction
Follows assigned schedule, adjusts meet unanticipated changes, while considering the needs of the participant and requirements of the PACE Center. Communicates these changes to dispatch
Operates equipment safely and in compliance with vehicle licensing regulations
Maintains and completes daily required records i.e., Pre- and Post-Trip Inspections, gasoline purchases
Immediately reports, any vehicle or cell phone operating problems, malfunction, or incidents out of the ordinary routine
Transports participants to and from medical/specialist appointments, and activity outings, as assigned by the Interdisciplinary Team via the plan of care
Transports meals, durable medical equipment, pharmacy, and any other items as deemed necessary for participant
Provides physical assistance to each participant when needed as he/she boards and debarks from the program's vehicles
Ensures vehicle equipment is maintained and operating within manufactures recommendations, replacing supplies as needed
Functions as a member of the Interdisciplinary Team when appropriate

What we offer

Health Insurance
Dental Insurance
Vision Insurance
Retirement with Company Match
Paid Time Off
Thrift Shop Discount
Shift Differential: $5/hour

Fulltime

Select Country

Cell Operator

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?

Cell Operator

Cell Operator

Aircraft Documentation Controller

MSAT Process Engineer

Global Head of Business Development

Electronic Technician II

Test & Validation Technician

SMT Technician II

Transportation Driver

Our AI answers in your language