Battery Design Engineer Job at Archer Aviation (San Jose)

Design Engineer

The Electrical Design Engineer will be responsible for the design of 11kV-132kV ...

Location

United Kingdom , Bristol

Salary:

50000.00 - 75000.00 GBP / Year

Hedera Hiring Ltd

Expiration Date

Until further notice

Requirements

Proven experience in the design of substations and electrical infrastructure (11kV to 132kV)
BEng in Electrical Engineering (or equivalent)

Job Responsibility

Protection & Control Design – Prepare protection SLDs, scheme specifications, control schematics, coordination reports, and relay configuration files
HV Cable Design – Design and verify HV cable systems, including ampacity rating calculations and reports using manufacturer data and analysis software (e.g. Cymcap)
System Studies – Carry out preliminary studies using DIgSILENT PowerFactory (load flow, fault level, protection coordination, harmonics, P28) and manage/review studies from external consultants
Earthing Design – Perform earthing designs using Excel and CDEGS
review consultant-prepared earthing designs
Detailed Design Packages – Produce cable schedules, schematics, block wiring diagrams, ADMD calculations, and battery charger sizing
Drawings & CAD Support – Prepare general arrangement drawings and support CAD and panel assembly teams
Health & Safety Compliance – Ensure all designs prioritise safety and comply with CDM and H&S regulations
Site & Client Engagement – Conduct site surveys, inspections, and factory acceptance tests (FATs), while liaising directly with clients and consultants throughout the project lifecycle

What we offer

Contributory company pension
discretionary bonus scheme
highly competitive profit share scheme (partner in the business)
private health insurance
healthcare cashback plan
life assurance
Employee Assistance Programme
mental health support
25 days annual leave plus public holidays
holiday purchase scheme

Fulltime

Battery Manufacturing Engineer

As part of the mission at Archer, we’re designing, building, and scaling battery...

Location

United States , San Jose

Salary:

125430.00 - 166800.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Bachelor’s or Master’s degree in Engineering or a related field
3+ years of hands-on manufacturing experience, ideally in EV battery module/pack production
Proven experience scaling from prototypes to high-volume production
Track record in OEE improvement, preventative/predictive maintenance, and process optimization
Strong knowledge of statistical process control, GD&T, and lean manufacturing principles
Proficiency in data analysis tools (Minitab, JMP, Python, or equivalent)
Experience in root cause analysis (8D, 5-Why, Fishbone) and failure analysis
Familiarity with safety standards (ANSI/RIA 15.06, OSHA)
Experience with CAD, PLM, MES, and ERP systems
Understanding of PLCs, robotics, motion control, vision systems, and human-machine safety devices

Job Responsibility

Lead the design, development, and deployment of battery manufacturing lines at Archer facilities
Define build sequences, process flows, cycle times, layouts, and manufacturability solutions
Support PFMEA and other risk analysis activities to ensure robust, safe, and reliable manufacturing processes
Develop equipment specifications and partner with suppliers through RFQ, PO, FAT/SAT, installation, and validation to achieve SOP readiness
Prepare budgets, project schedules, and financial justifications for leadership review
Create and execute Factory Acceptance Testing plans, overseeing testing through line development and launch
Drive process control initiatives, focusing on quality, equipment capability, and overall efficiency
Review and resolve quality notifications, participate in Material Review Boards, and implement corrective and preventive actions
Maintain and optimize MES configurations, shop floor routings, process parameters, and data collection protocols
Serve as a technical generalist on production lines, providing troubleshooting support during equipment downtime or process deviations

Fulltime

Battery Test Engineer

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

124000.00 - 168000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

BS in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or related field
2-7 years of experience in a battery design or testing environment
Experience testing Battery Pack Electrically & Mechanically
Experience with high voltage systems: cars, aircraft, etc.
Experience with reliability testing on high current power systems
Experience with a wide variety of DAQ systems
Experience with MATLAB and Python
Demonstrated project execution experience
Demonstrated knowledge of hands-on experience with electrical & mechanical systems
Positive can-do attitude

Job Responsibility

Perform Environmental & Mechanical testing of prototype and certified batteries for the eVTOL aircraft
Collaborate with teams across the company to develop test plans and execute on those plans for flight critical hardware
Perform Acceptance Testing on Modules,Battery Packs, and Charge Port Assemblies
Perform Shock & Vibration testing
Perform Humidity, Waterproofness, Fluid testing
Mechanical design of test rigs
Development of LabVIEW, Python, and other test development tools
Analyze test data and share with engineering teams
Develop automated test equipment as needed
Develop novel test procedures and execute testing

Fulltime

Design Release Engineer, HV Systems

This role will take ownership of the electrical distribution system design from ...

Location

United States , Garden Grove

Salary:

55.00 - 65.00 USD / Hour

Harbinger Motors

Expiration Date

Until further notice

Requirements

Possess a Bachelor's degree or other relevant educational credential
Experience in Catia v6 software is a significant plus
Knowledge of industry standards and best practices related to wire harness, power distribution, etc.
Strong problem-solving skills with the ability to effectively communicate and collaborate within a dynamic team environment
Experience working on High Voltage systems for Electric Vehicles

Job Responsibility

Lead the design and release of high-voltage (HV) wiring harnesses for vehicle propulsion and energy systems, including cables, connectors, shielding, and protective coverings
Collaborate closely with powertrain, battery, thermal, chassis, and body teams to ensure proper routing, packaging, and mechanical integration of all HV harnesses
Generate and maintain EDS (Electrical Distribution System) schematics, 3D models, detailed drawings, and bills of materials
Manage suppliers to define component specifications, support prototype builds, and production readiness
Manage engineering releases and updates through Harbinger’s PLM system, ensuring design traceability and configuration control
Contribute to design guidelines, best practices, and process improvements for future HV architecture programs
Support prototype wiring fabrication and DV / PV testing (component, system & vehicle level)
Work with domain experts and supply chain team members to select and integrate electrical components
Support wire harness integration in Catia v6 to support CAE and DFM activities

Fulltime

Senior Electrical Engineer, Video

As a Senior Member of Axon's Video Electrical Engineering team, you will lead th...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering or similar engineering discipline
7+ years of industry embedded electronics design experience with a major focus on designing high-speed, high-density, portable, battery-powered devices, robotics, or low-power vehicular embedded circuits
Creative and passionate about innovative design and cutting-edge technology
Demonstrated ownership of embedded electronics design across multiple subsystems
Skilled in high-speed, high-density hardware design, including system architecture development, component selection, schematic design, PCB layout management, design verification testing and debug
Proficient leading electronics design and development from concept to mass production
Experience with technical oversight of design partners, ODMs, and JDMs leading to successful electronics design
Strong proficiency with point of load power supply design (Switch mode, linear regulators), PMIC integration, power tree development, and power consumption analysis
Experience with Lithium batteries and battery charging circuit design
Experience with RF transceiver integration including LTE, Wi-Fi, and GNSS

Job Responsibility

Own the design of critical electronic circuits and systems
Collaborate globally with cross-functional engineering teams to deliver world-class products
Mentor and inspire junior engineers, fostering technical growth across the team
Research, propose, and develop innovative, industry leading circuit designs for Axon’s future-generation video products, wired and wireless devices, and/or low power accessories
Lead project team EE’s and design partners, joining forces to achieve successful completion of hardware objectives
Use OrCAD to create embedded mixed-signal circuit schematics, integrating components like application processors, image sensors, high speed memory, high speed digital communication buses, RF transceivers, power supplies, battery charging systems, and more
Partner with PCB Design engineers to define, review, and optimize printed circuit board layout designs using Allegro or other layout tools
Bring up, characterize, optimize, and debug systems and circuits using lab tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc
Team up with RF Engineers to integrate and validate critical RF circuitry for wirelessly connected devices
Assess design outcomes, test results, and related information and present findings to design team and management

What we offer

Competitive salary and 401K with employer match
Paid time off at your discretion
Robust parental leave policy
An award-winning office/working environment
Ride along with police officers to see them use our technology and get inspired

Fulltime

Sr. Electrical Engineer, Sustaining

As a member of the TASER Electrical Engineering Sustaining team, you will be res...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering or similar engineering discipline
Six years of industry experience in electronics design and sustaining for mass-produced, handheld, embedded, battery-powered consumer devices
Expertise in identifying and implementing alternative electronic components or circuit design modifications to enhance performance, address obsolescence, and optimize supply chain efficiency for released mass-production electronics
Proficient in executing design changes across bill of materials, schematics, and layouts to support identified product changes/updates
Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDOs), microcontrollers, memory subsystems (FLASH, EEPROM), switches, connectors, communication interfaces (SPI, UART, I2C), indication LEDs, displays, LASERs, electromechanical transducers, hall effect sensors, inertial measurement units, accelerometers, protection circuitry (ESD, voltage, and current limiting components), discrete resistors/capacitors/inductors, rechargeable batteries and charging/balancing circuitry, RF subsystems (BLE, WiFi) for flex, rigid, and rigid-flex PCB designs
Strong hands-on expertise in electronics verification, characterization, and failure analysis, utilizing lab equipment such as oscilloscopes, power supplies, multimeters, custom test jigs and software related tools
Experience collaborating with laboratory technicians on circuit and component rework. Skilled in coordinating or performing component replacement and rework
hands-on soldering skills are a strong plus. Knowledgeable in rework processes, with the ability to execute directly or manage internal and external rework activities
Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired

Job Responsibility

Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics associated with TASER devices and accessories
Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
Execute bench-level verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, power supplies, multimeters, logic analyzers, and custom related test equipment and software tools
Perform debugging, failure analysis, and rework of electronic systems, circuits, and components to identify and confirm root cause of issues associated with updated design changes or RMA returns. This includes close collaboration with the failure analysis team to conduct CT scans on suspect assemblies and the use of functional circuit testers in production to validate final issue resolution
Using OrCAD schematic design tools, improve or modify embedded mixed-signal electronic circuitry that integrates high voltage power supply circuitry, microcontrollers, flashlight/indication/display/LASER circuitry and drivers, memory devices (FLASH/EEPROM), switch-mode and linear power supplies, batteries, high-speed and low-speed data interfaces, electromechanical transducers, and other discrete digital and analog components for flex, rigid, and rigid-flex PCB designs
Partner with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro and other layout tools
Develop test methods, execute system and component-level verification, and lead test planning efforts to evaluate electronics design changes
Team with validation and other engineering teams to evaluate and document design update outcomes, test results, and related information, then present findings to management for review and further action
Update and help to finalize assembly drawings, bill of materials, Geber files, and other design documentation needed to support updated design change releases
Knowledge sharing, mentoring, and close collaboration with other team members and departments

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs
snacks in our offices

Fulltime

Electrical Engineer

We are on a mission to disrupt the global steel industry by producing green stee...

Location

Sweden , Stockholm

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Minimum 6-10 years working experience in major industrial capital projects in the areas of Electrical Design & Engineering, preferably in Steel Plant /Power Plant / Hydrogen / Oil & Gas Major Projects
Highly developed knowledge of industrial scale electrical designing
Experienced in ensuring that all electrical design & engineering documents and installations conform to relevant International & National Codes and Standards and also conform to Local Swedish and Scandinavian standards
To prepare, review, approve the design and site installation documents related to Electrical work, Power System Studies, (Load Flow, Short Circuit, Harmonic Analysis, Protection Relay Settings & Coordination, Equipment Sizing, Equipment Electrical Design Calculations, EHV-HV/ LV Sub-stations including Switchgears, Transformers, Cabling, Relays, UPS, Battery Chargers, HV/MV/LV Motors, Drives, Emergency Generators, Transmission and Distribution of Power, Hazardous area classification, field electrical equipment, Fire Alarm System, Instrumentation & Control System is preferred
Hands on experience on ETAP software, review of Design and Calculations done through ETAP or similar software
Previous project experience with International, Swedish /Scandinavian codes and standards will be an advantage
Experience in design, planning, execution, management & communication with all stakeholders in large successful capital projects
Extensive experience in coordinating with EPCM & OEM Electrical engineers and following, reviewing, commenting and approving design deliverables and documents
Must be knowledgeable about industry best practices and change management
Recent experience managing engineering and construction activities in large capital projects

Job Responsibility

Oversee, review and analyze the electrical design work for one or more areas (Steel Mill, Iron Reduction, Hydrogen Plant, Balance of Plant, PDOP Power Distribution areas and Ground Works) in Boden Project
Ensure coordination of our engineering partners to reach cost and time efficient design solutions for all electrical design & engineering work related to your area
Participate in the cross-functional delivery and technology teams
As part of the owners engineering team you are responsible for engineering assurance within your discipline
Ensure that EPCM and OEM partners get the information and feedback required to deliver the work in a safe, cost-effective, and schedule-effective way
Represent for the Electrical discipline, being the single point of contact for the delivery and quality of the discipline
Own Electrical engineering and design in the areas assigned
Provide leadership and guidance on developing the engineering and design strategy and concepts
Manage engineering work to ensure compliance to codes, standards, regulations, equipment specifications, and process equipment operating targets
Report to Electrical Lead of Project Delivery department

Fulltime

Senior Electrical Engineer

At Product Creation Studio, we are looking for a senior-level electrical design ...

Location

United States , Seattle

Salary:

Not provided

Product Creation Studio

Expiration Date

Until further notice

Requirements

7+ years experience as a design engineer developing custom electronics
BSEE
MS or Ph.D. a plus
Experience on multiple projects supporting new product introduction through all phases of development from concept to production
Experience with implementing design incorporating industry-standard peripherals such as Wi-Fi, USB, Bluetooth, RS232, and Ethernet
Experience integrating designs using 32-bit+ ARM, RISC, or PC architecture application processors or microcontrollers
Experience with implementing analog designs including filters and power conversion
Experience developing designs with industry-standard interfaces such as I2C, I2S, SPI, PCI, RS232
Experience designing for signal integrity and low EM emission and susceptibility
Experience optimizing designs for manufacturing including testability, component sourcing, life cycle, ease of assembly, and cost

Job Responsibility

Support and lead electrical engineering in all phases of product development that include scoping and project planning, assessing feasibility, identifying and de-risking technical elements, developing and validating product specifications, determining system architecture, detailed circuit design, testing and design validation, agency compliance, and manufacturing support
Design custom electronics performing schematic capture, source new components, simulate and perform circuit analysis, implement or direct printed circuit board layout, oversee PCBA fabrication, develop test plans and validate reliability and performance
Design for Safety and EMC agency compliance requirements, perform or oversee agency certification testing, and mitigate issues
Mentor and provide technical oversight of other electrical engineers
Scope and determine work breakdown on projects, identify high-risk elements and plan and perform rapid prototyping or technical feasibility studies
Coordinate and collaborate with clients, program management, and other engineering disciplines
Identify issues, new scope, errors, or unplanned tasks in the course or project execution work with project management and the client to incorporate updates to the project plan or modify requirements or deliverables to meet schedule and budget constraints
Make aggressive but achievable commitments and deliver designs that meet quality and performance requirements on schedule and on budget

What we offer

medical/dental/vision
FSA
401k
creative, friendly work environment

Battery Design Engineer

Archer Aviation

Location:
United States , San Jose

Category:
IT - Software Development

Contract Type:
Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
March 10, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Battery Design Engineer

Design Engineer

Battery Manufacturing Engineer

Battery Test Engineer

Design Release Engineer, HV Systems

Senior Electrical Engineer, Video

Sr. Electrical Engineer, Sustaining

Electrical Engineer

Senior Electrical Engineer

Battery Design Engineer

Archer Aviation

Location:United States , San Jose

Category:IT - Software Development

Contract Type:Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:March 10, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Battery Design Engineer

Design Engineer

Battery Manufacturing Engineer

Battery Test Engineer

Design Release Engineer, HV Systems

Senior Electrical Engineer, Video

Sr. Electrical Engineer, Sustaining

Electrical Engineer

Senior Electrical Engineer

Location:
United States , San Jose

Category:
IT - Software Development

Contract Type:
Employment contract

Job Posted:
March 10, 2026