CrawlJobs Logo

Avionics technician-ground test inspector

United States, Mobile Area, AL · Job Posted January 24, 2026
Apply Position
Job Link Share

Job Description

Avionics Technician-Ground Test Inspector (GTI) will be responsible for the planning, execution and validation of Ground Tests in the Final Assembly Line. This includes the demonstration of conformity within aircraft systems to the design specifications through attestation in the Airbus Test System (ESAO). Initiate actions to isolate, document and ultimately eliminate any deviations detected.

Job Responsibility

  • Perform Ground Tests
  • Prepare the aircraft and workstation surroundings for ground tests on various avionics and electrical systems
  • Perform function tests on all systems
  • Organize documentation of any non-conformity in the SAP NC system and initiate associated retests
  • Collaborate with Ground Test Design, Engineering-, Quality- and Shop Floor departments
  • Perform Troubleshooting (T/S)
  • Prepare and coordinate troubleshooting and distinguish error types
  • Clarify problems with the engineering department
  • Ensure the safety of people and the aircraft all along the process
  • Execute ground test following released documents and their associated work orders
  • And enters, records the values plotted during the test when measurements are required
  • Support improvement measures
  • Identify problems internally in order to continuously improve the “On Time On Quality” production process
  • Perform and check operational tests and attest the conformity of the aircraft
  • Perform upload of software equipment on/off aircraft and already installed on aircraft if needed
  • Extract electrical schematics for troubleshooting and perform specific tests to identify root cause failure
  • Launch Practical Problem Solving (PPS) for continuous improvements
  • GTP performs root cause analysis
  • Investigation: Test tool failure, A/C equipment failure or A/C installation discrepancy
  • Declaration and follow up of non conformity for rework or certification

Requirements

  • High School Diploma/ GED
  • Ability to successfully complete trainings provided by Airbus
  • 2 years minimum experience as an Aircraft Avionics Technician with a focus on aircraft systems (electrical preferred)
  • 2 years minimum of experience in trouble shooting on aircraft systems
  • Knowledge of station safety, quality (clean as you go / Foreign Object Debris) and OSHA regulations
  • Keep tools and support equipment in safe operational conditions at all times
  • Physical Requirements: Vision: adequate to enter and read material on computer screens, Hearing: able to hear sufficiently to engage in conversation, Speaking: able to engage in conversations, Equipment Operation: Able to operate a wide range of personal and office electronic equipment, Working on jigs at the fuselage at a height of 15 feet, Able to work on hydraulic lifts sometimes at a height of up to 40 feet, Carrying: able to occasionally carry up to 20 lbs, Confined Space: able to enter and exit a 12" x 22" passage, Heights: able to work at heights of approximately 40 feet, Lifting: able to occasionally lift up to 30 lbs, Pushing/Pulling: able to push/pull items, Sitting: able to sit for extended periods of time, Squatting/Kneeling: able to occasionally squat or kneel

Nice to have

  • Training from a vocational school or previous employer in the use of application tools and in application techniques
  • Experienced in Quality Inspector on avionics systems

What we offer

  • Upon successful completion of the program and military separation, candidates may be considered for a permanent position
  • Full-time benefits include competitive base salaries, incentive compensation, a retirement savings plan, and comprehensive health and welfare coverage

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Similar Jobs for

Avionics technician-ground test inspector

8 matching positions

Avionics technician-ground test inspector

Avionics Technician-Ground Test Inspector (GTI) will be responsible for the plan...
Location
Location
United States , Mobile Area, AL; Columbus, MS; Kinston, NC
Salary
Salary:
Not provided
airbus.com Logo
Airbus
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma/ GED
  • Ability to successfully complete trainings provided by Airbus
  • 2 years minimum experience as an Aircraft Avionics Technician with a focus on aircraft systems (electrical preferred)
  • 2 years minimum of experience in trouble shooting on aircraft systems
  • Knowledge of station safety, quality (clean as you go / Foreign Object Debris) and OSHA regulations
  • Keep tools and support equipment in safe operational conditions at all times
  • Vision: adequate to enter and read material on computer screens
  • Hearing: able to hear sufficiently to engage in conversation in office settings
  • Speaking: able to engage in conversations in person and via electronic means
  • Equipment Operation: Able to operate a wide range of personal and office electronic equipment
Job Responsibility
Job Responsibility
  • Perform Ground Tests
  • Prepare the aircraft and workstation surroundings for ground tests on various avionics and electrical systems
  • Perform function tests on all systems (flight controls, navigation, passenger entertainment, etc.)
  • Organize documentation of any non-conformity in the SAP NC system and initiate associated retests
  • Collaborate with Ground Test Design, Engineering-, Quality- and Shop Floor departments
  • Perform Troubleshooting (T/S)
  • Prepare and coordinate troubleshooting and distinguish error types
  • Clarify problems with the engineering department
  • Ensure the safety of people and the aircraft all along the process
  • Execute ground test following released documents and their associated work orders
What we offer
What we offer
  • Competitive base salaries
  • Incentive compensation
  • A retirement savings plan
  • Comprehensive health and welfare coverage
  • Fulltime
Read More
Arrow Right

Avionics technician-ground test inspector

Avionics Technician-Ground Test Inspector (GTI) will be responsible for the plan...
Location
Location
United States , Mobile Area, AL; Columbus, MS; Kinston, NC
Salary
Salary:
Not provided
airbus.com Logo
Airbus
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma/ GED
  • Ability to successfully complete trainings provided by Airbus
  • 2 years minimum experience as an Aircraft Avionics Technician with a focus on aircraft systems (electrical preferred)
  • 2 years minimum of experience in trouble shooting on aircraft systems
  • Knowledge of station safety, quality (clean as you go / Foreign Object Debris) and OSHA regulations
  • Keep tools and support equipment in safe operational conditions at all times
  • Vision: adequate to enter and read material on computer screens
  • Hearing: able to hear sufficiently to engage in conversation in office settings
  • Speaking: able to engage in conversations in person and via electronic means
  • Equipment Operation: Able to operate a wide range of personal and office electronic equipment
Job Responsibility
Job Responsibility
  • Perform Ground Tests
  • Prepare the aircraft and workstation surroundings for ground tests on various avionics and electrical systems
  • Perform function tests on all systems
  • Organize documentation of any non-conformity in the SAP NC system and initiate associated retests
  • Collaborate with Ground Test Design, Engineering-, Quality- and Shop Floor departments
  • Perform Troubleshooting (T/S)
  • Prepare and coordinate troubleshooting and distinguish error types
  • Clarify problems with the engineering department
  • Ensure the safety of people and the aircraft all along the process
  • Execute ground test following released documents and their associated work orders
What we offer
What we offer
  • competitive base salaries
  • incentive compensation
  • a retirement savings plan
  • comprehensive health and welfare coverage
  • Fulltime
Read More
Arrow Right
New

Kam-Geely

Well-known European and American auto parts supplier
Location
Location
China , 苏州市
Salary
Salary:
300000.00 - 450000.00 CNY / Year
https://www.randstad.com Logo
Randstad
Expiration Date
August 30, 2026
Flip Icon
Requirements
Requirements
  • Bachelor degree or above
  • Have working experience in Auto Geely customer sales positions
  • Basic written and oral English
Job Responsibility
Job Responsibility
  • Responsible for product sales to Auto PC Geely customers
  • Maintain and develop customer relationships, plan business prospects, develop markets, and achieve sales budget
  • Fully understand and be familiar with the products sold
  • Responsibility requirements are in line with the company's business guidance and strategy
  • Fulltime
Read More
Arrow Right
New

Staffing Consultant – Agency Recruiter

As a Staffing Consultant, you will find, interview, and qualify job seekers for ...
Location
Location
United States , San Diego
Salary
Salary:
70304.00 - 71000.00 USD / Year
bhsg.com Logo
Beacon Hill
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Excellent interpersonal and written communication skills
  • A love for working with people
  • A tenacious degree of self-motivation
  • Leadership skills and a significant dose of competitive drive
  • Confidently exercise discretion and independent judgment about businesses and people
  • An incessant drive to meet goals and metrics
Job Responsibility
Job Responsibility
  • Find, interview, and qualify job seekers for temporary/contract roles
  • Run the entire recruiting process from sourcing to placement
  • Engage in conversations with job seekers over the phone, via email, or in-person
  • Build strong relationships with job seekers
  • Meet with your team to discuss open positions
  • Post advertisements for open jobs
  • Learn to utilize online sourcing tools and resources
  • Identify prospective candidates via job board search tools, LinkedIn, internet searches, referrals, professional networking
  • Post jobs on job boards
  • Interview prospective candidates
What we offer
What we offer
  • Base salary combined with uncapped commission potential
  • Hands-on, individualized training programs
  • Mentorship
  • A culture that prioritizes Inclusion & Belonging
  • Upward mobility
  • A work-hard, play-hard culture
  • Medical, dental, vision, and federal and state leave programs
  • Fulltime
Read More
Arrow Right
New

Staffing Consultant – Agency Recruiter

As a Staffing Consultant, you will find, interview, and qualify job seekers for ...
Location
Location
United States , San Francisco
Salary
Salary:
70304.00 - 71000.00 USD / Year
bhsg.com Logo
Beacon Hill
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Excellent interpersonal and written communication skills
  • A love for working with people
  • A tenacious degree of self-motivation
  • Leadership skills and a significant dose of competitive drive
  • Confidently exercise discretion and independent judgment about businesses and people
  • An incessant drive to meet goals and metrics
Job Responsibility
Job Responsibility
  • Identify prospective candidates – via job board search tools, LinkedIn, internet searches, referrals, professional networking
  • Post jobs on job boards
  • Interview prospective candidates
  • Prep candidates for interviews with client companies – review resumes, discuss client needs, conduct mock interviews
  • Contact candidates post-interview – recap interview, provide next steps
  • Deliver the good news! – extend job offers and manage the offer process for candidates
  • Reach out to candidates who are on assignment – make sure they have everything they need!
  • Proactive cold calling to identify prospective candidates
What we offer
What we offer
  • Base salary combined with uncapped commission potential
  • Hands-on, individualized training programs
  • Mentorship
  • A culture that prioritizes Inclusion & Belonging
  • Upward mobility
  • A “work-hard, play-hard” culture
  • Medical, dental, vision, and federal and state leave programs
  • Fulltime
Read More
Arrow Right
New

Associate Staffing Consultant

The Associate Staffing Consultant (ASC) is a newly created role within our Contr...
Location
Location
United States , Los Angeles
Salary
Salary:
30.00 - 45.00 USD / Hour
bhsg.com Logo
Beacon Hill
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Excellent interpersonal and written communication skills
  • A love for working with people
  • A tenacious degree of self-motivation
  • Leadership skills and a significant dose of competitive drive
  • Confidently exercise discretion and independent judgment about businesses and people
  • An incessant drive to meet goals and metrics
Job Responsibility
Job Responsibility
  • Identify prospective candidates – via job board search tools, LinkedIn, internet searches, referrals and professional networking
  • Post jobs on job boards
  • Interview prospective candidates
  • Prep candidates for interviews with client companies – review resumes, discuss client needs and conduct mock interviews
  • Contact candidates post-interview – recap interview, provide next steps
  • Deliver the good news! – extend job offers and manage the offer process for candidates
  • Reach out to candidates who are on assignment – make sure they have everything they need
  • Proactive cold calling to identify prospective candidates
What we offer
What we offer
  • Hourly compensation with bonus opportunity
  • Hands-on, individualized training programs
  • Mentorship
  • A culture that prioritizes Inclusion & Belonging
  • Upward mobility
  • A work-hard, play-hard culture
  • Medical, dental, vision, and federal and state leave programs as required by applicable agency regulations
  • Fulltime
Read More
Arrow Right
New

Maintenance Manager

As Maintenance Manager, you will be responsible for leading and coordinating the...
Location
Location
United Kingdom , Edinburgh
Salary
Salary:
Not provided
apexhotels.co.uk Logo
Apex Hotels Ltd
Expiration Date
July 22, 2026
Flip Icon
Requirements
Requirements
  • Hold a minimum of 3 years management or supervisory experience within the building maintenance or facilities management arena
  • Be mechanically or electrically qualified or hold other relevant trade qualification
  • Be able to demonstrate sound knowledge and experience of building fabric related trades and practices
  • Strong knowledge of the operation, control and maintenance of building services plant and systems (HVAC/ MEP)
  • Hold sound knowledge of Statutory Compliance activities related to the built environment
  • Hold familiarity with the function and use of Microsoft Office suite of programmes
  • Have previous experience in the use of CAFM/ CMMS or similar software
  • Hold strong people management and communication skills
  • Be an enthusiastic self-starter, able to motivate and inspire others
  • Live within daily commutable distance of Edinburgh City Centre
Job Responsibility
Job Responsibility
  • Line management of on-site maintenance team including the driving of productivity and high maintenance standards through ongoing mentoring and development
  • Reporting regularly to the Hotel Operations Director on the status of maintenance delivery
  • Providing the hands-on skills and knowledge necessary to maintain the hotel and embedded systems in fully compliant, optimal condition
  • Undertaking regular and proactive inspection of building fabric, plant and systems ensuring high standards of maintenance are maintained
  • Delivery of Planned and Reactive maintenance services
  • Liaising closely with other hotel departments and wider management team to support continual improvement of property maintenance standards
  • Accurate record keeping and the maintaining of the CMMS data base up to date
  • Supervision of 3rd party contractors
  • Purchase ordering of maintenance spares and outsourced specialist services
  • Health & Safety management, including Statutory Compliance, Risk Assessment, Permits to Work and guarding of safe working practices
What we offer
What we offer
  • 35 days holiday
  • Training and development from day one
  • Employee events and celebrations
  • Inhouse company interactive employee communication APP
  • Entry to our state-of-the-art gym and pools
  • Healthy meals to enjoy while you're working
  • Access to an external Employee Assistance Programme
  • Financial Wellbeing App, allowing you the flexibility to get paid earlier than your normal monthly pay date
  • £200 referral bonus when your friends or family join the team
  • Access to our discounts and wellbeing platform 'Treat Yourself Here', unlocking savings and experiences for you and your family
  • Fulltime
Read More
Arrow Right
New

Application Engineer

A technology company specializing in industrial-grade AI-powered visual inspecti...
Location
Location
China , 南通市
Salary
Salary:
250000.00 - 400000.00 CNY / Year
https://www.randstad.com Logo
Randstad
Expiration Date
September 01, 2026
Flip Icon
Requirements
Requirements
  • Bachelor's degree or above in Automation, Computer Science, or Machine Vision, with a strong technical background
  • 5+ years of experience in the machine vision or industrial automation industry, with a proven track record of successful team management
  • Proficient in industrial lighting, visual imaging, and deep learning application processes, capable of solving complex on-site technical challenges
  • Excellent project management and resource integration skills, with keen business acumen and strong communication skills
  • Good English communication skills, able to adapt to a rapidly growing startup environment and necessary business trips to client sites
Job Responsibility
Job Responsibility
  • Lead the application engineering team, responsible for the design and implementation of AI vision systems in various industrial scenarios
  • Manage the entire project lifecycle, coordinating cross-departmental resources to ensure efficient deployment and delivery of technical solutions
  • Deeply understand customer needs, transforming business pain points into actionable AI vision technical specifications and application roadmaps
  • Guide optics selection, data acquisition, and model verification, continuously optimizing system detection accuracy on production lines
  • Establish standardized project management processes and technical documentation systems to support rapid global business expansion
  • Fulltime
Read More
Arrow Right