Avionics Lead Engineer Job at Airbus (Bangalore)

Electrical and Avionics Systems Engineer

ITPS is seeking a full-time Electrical Engineer to join our engineering team in ...

Location

Canada , London, Ontario

Salary:

Not provided

ITPS (CANADA) LTD

Expiration Date

Until further notice

Requirements

Solid understanding of aircraft electrical systems, power distribution, and signal integrity
Hands-on experience with avionics interfaces and protocols: ARINC 429, RS-232/422/485, CAN bus
Experience with LRU integration, signal routing, grounding/shielding practices, and EMI/EMC considerations
Ability to work with aircraft sensors (AHRS, IMUs, magnetometers, electro-optical payloads) and mission/display computers
Familiarity with technical drawing tools (e.g., MS Visio, Enovia) and engineering design platforms
Understanding of regulatory and airworthiness documentation standards in aerospace systems
Proficiency with tools such as: MS Office, Navision, Enovia, ARINC scheduling software
Experience with Matlab or IADS for system analysis and data visualization

Job Responsibility

Lead design and development of aircraft electrical systems from concept to production
Prepare and maintain engineering documentation: I/O definitions, schematics, interface control documents (ICDs), wiring diagrams
Design and review custom PCB layouts and avionics harnessing
Oversee component selection, BOM management, and procurement coordination
Plan and conduct bench-level and on-aircraft testing, including functional verification, continuity checks, and system validation
Collaborate with avionics, flight test, and systems teams for seamless integration into flight platforms
Provide technical support during installation, troubleshooting, and acceptance testing phases

Fulltime

Subject-Matter Expert Avionics Engineer

Phalanx Griffon (PG) is the Air Force’s open‑architecture airborne node linking ...

Location

United States , Dayton

Salary:

Not provided

DCS Corporation

Expiration Date

Until further notice

Requirements

U.S. Citizenship
Active TS/SCI clearance
High School Diploma plus 20 years of experience
Must have been directly involved with avionics engineering and have focused on this technical area for over 20 years
has published work or work samples showing that they are an expert in this field
have participated in technical presentations/roadshows/conferences as an expert in their respective field
Expert knowledge of MIL‑STD‑1553, ARINC‑429/664, Ethernet (TSN/AFDX), VPX architectures, and timing/synchronization methods
Demonstrated success integrating Type‑1 crypto, SATCOM/RF subsystems, and open mission systems (OMS/UCI, FACE, SOSA)
Hands‑on experience generating airworthiness artifacts and guiding systems through developmental & operational test
Proficiency with avionics E‑CAD and MBSE tools (CAMEO/MagicDraw, Rhapsody, Altium/OrCAD)

Job Responsibility

Define avionics integration schemes that marry Nomad VPX hardware with platform data buses (MIL‑STD‑1553, ARINC‑429/664, Ethernet TSN) and mission computers
Develop interface‑control documents (ICDs), signal‑flow diagrams, and timing budgets
ensure alignment with OMS/UCI messages and cross‑domain guard rules
Lead authoring of AF Form 1067s, E‑series flight‑clearance packages, and safety‑of‑flight analyses
Oversee DO‑254 (hardware) & DO‑178C (software) compliance artifacts where required
Capture avionics models in SysML/CAMEO and link to requirements, verification methods, and hardware part trees
Drive configuration‑control boards, red‑line incorporation, and model synchronization
Specify and validate wiring harnesses, signal conditioning, and power interfaces in the Integration SIL
Troubleshoot EMI/EMC, timing, and protocol issues
guide corrective actions through to flight‑test readiness

Fulltime

Design Lead, Airframe

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

Not provided

Archer Aviation

Expiration Date

Until further notice

Requirements

Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or a related field
7+ years of experience in airframe design and development
Strong first-principles approach to the design and implementation of efficient load paths
Demonstrated experience contributing to technical projects and hardware development efforts
Familiarity with aircraft certification processes (Part 23, Part 25, or Part 27)
Understanding of composite airframe structures, materials, and manufacturing processes
Proficiency with CAD software (NX Preferred)
Strong written and verbal communication skills
Ability to work effectively in a fast-paced, dynamic environment

Job Responsibility

Technical Execution: Develop assigned airframe hardware elements from concept through to production, defining the technical approach for your work package, establishing design parameters, managing the development process, and resolving technical challenges within your scope
Team Collaboration and Communication: Collaborate and coordinate with the IPT Lead and other Design Leads, as well as interfacing with other program teams (e.g., avionics, propulsion) to ensure seamless integration of your hardware element through regular meetings, status updates, and information sharing
Requirements Management and Systems Engineering Support: Work closely with the IPT Lead and Systems Engineering team to ensure appropriate requirements are allocated to your hardware elements. This includes participating in requirements reviews, clarifying technical specifications, and ensuring traceability between system-level requirements and your work package design
Task Planning and Execution: Break down work package objectives into actionable tasks, identifying specific activities, estimating effort and duration, coordinating resources, and developing detailed work plans to support the IPT Lead and Project Manager in effective project planning, execution, monitoring, and control

Fulltime

Airframe IPT Lead

We are seeking an experienced and highly motivated Integrated Product Team (IPT)...

Location

United States , San Jose

Salary:

224000.00 - 280000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or a related field
10+ years of experience in airframe design and development
Solid first-principles approach to the design and implementation of efficient load paths
Proven track record of leading technical projects and teams
Experience with aircraft certification processes (Part 23, Part 25, or Part 27)
Strong understanding of composite airframe structures, materials, and manufacturing processes
Proficiency with CAD and FEA software
Excellent written and verbal communication skills
Ability to work effectively in a fast-paced, dynamic environment

Job Responsibility

Oversee all aspects of airframe hardware development, ensuring developed hardware meets specified design and performance requirements, aligns with program objectives, and adheres to regulatory standards
Develop airframe hardware components from concept through to production within the assigned scope, defining the technical approach, establishing design parameters, managing the development process, and resolving any technical challenges
Collaborate and coordinate with other program teams (e.g., avionics, propulsion, ) to ensure seamless integration and alignment across the program through regular meetings, status updates, and information sharing
Work closely with the Systems Engineering team to ensure appropriate requirements are allocated to the hardware components being developed. This includes participating in requirements reviews, clarifying technical specifications, and ensuring traceability between system-level requirements and hardware design
Support the Project Manager (PM) by breaking down high-level technical work objectives into actionable tasks, identifying specific activities, estimating effort and duration, assigning resources, and developing detailed work plans to facilitate effective project planning, execution, monitoring, and control

Fulltime

Hardware Integration Engineer

Merlin is a venture backed aerospace startup building a non-human pilot to enabl...

Location

United States

Salary:

Not provided

Merlin Labs

Expiration Date

Until further notice

Requirements

BS in Electrical or Aerospace Engineering
10+ years of relevant systems level electrical systems and integration design experience for the aviation, aerospace, industries
Experience integrating and testing avionics systems
Experience with component specification, supplier interaction, and procurement processes
Experience integrating and debugging systems containing COTS/MOTS modules, custom circuits, software, sensors, and human / machine / graphical user interfaces
Working knowledge of integrating various components using standard interface protocols such as ARINC 429, RS-232, RS-422, and RS-485
Familiarity with lab test equipment, including oscilloscopes, multimeters, current probes, data acquisition, and bus analyzers
Experience with wire harness design and connector component selection and sourcing
Outstanding organization, analytical, and problem-solving skills
Excellent written, verbal, and presentation communication skills

Job Responsibility

Lead and perform avionics systems integration and testing of components of our aircraft autonomy system
Write and maintain electrical systems requirements documents, electrical load analyses, and other related documents for prototyping and certification
Write, maintain and execute test plans and design verification documents
Specify, identify, integrate and verify Commercial/Modified-Off-the-Shelf (COTS/MOTS) electronic subsystems for aircraft installation
Prepare and release electrical design and fabrication documentation for partners, vendors, and customers
Work with suppliers, managing their performance to requirements, budget and schedule
Provide guidance to other electrical engineers and technicians across the team working on electrical and electronic aspects of the system architecture and schematics including power, computer, electro-mechanical, interconnect systems, wireless communications, cable harnesses, packaging, cable routing, and user interfaces and controls
This position may require up to 50% travel to both domestic and international locations to support hardware integration

What we offer

health
dental
life
unlimited vacation
401k with match

Fulltime

Hardware Integration Engineer (Mechanical)

Merlin is a venture backed aerospace startup building a non-human pilot to enabl...

Location

United States

Salary:

Not provided

Merlin Labs

Expiration Date

Until further notice

Requirements

BS in Mechanical, Electro-Mechanical, or Aerospace Engineering and 5+ years technical work experience
Advanced modeling experience with tools such as SolidWorks, Catia, OnShape, Fusion, or Creo
Proven experience with rapid design cycles: taking a design from concept through detailed design, build, and test
Experience leading activities such as mechanism design, controls design and analysis, environmental analysis (thermal, vibration, airflow), and structural analysis
Outstanding organization, analytical, and problem-solving skills
Excellent written, verbal, and presentation communication skills

Job Responsibility

Design, integrate, and test avionics and control components for aircraft and test labs
Oversee design and analysis tasks for system integration including stress and model analyses
Provide CAD work in support of design activities, including application of industry best-practices for GD&T
Support and participate in testing activities – component, system development, and system certification – as needed including test plan creation, data analysis, and test report generation and documentation
Prepare and coordinate mechanical design and fabrication drawings and related documents
This position may require up to 25-50% travel, sometimes with short notice, to both domestic and international locations to support aircraft and system integration and testing

What we offer

health, dental, life, unlimited vacation, and 401k with match

Fulltime

Electrical Lead, Power Architecture

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

163200.00 - 204000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Master’s degree in Electrical Engineering, Power Electronics, or a related discipline
7+ years of experience in power system design for EV, aerospace, or similar high-reliability applications
Strong background in: HV inverter and converter design (400V–1000V+)
LV system architecture and power distribution
Integration of motors, generators and control systems
Proficiency in system simulation, schematic capture, and hardware validation
Experience with wide-bandgap devices (SiC, GaN) and modern digital control platforms (MCUs, DSPs, FPGAs)
Systems-level thinking and multidisciplinary collaboration
Strong technical communication and documentation skills
Ability to lead cross-functional efforts and mentor junior engineers

Job Responsibility

Lead the design and architecture of HV propulsion inverter and generator systems, including semiconductor topology, switching control, EMI, and thermal performance
Architect the LV electrical system, including DC/DC converters, power distribution, auxiliary loads, grounding, and redundancy
Contribute to architecture definition, trade studies and help manage system-level electrical requirements and interfaces across HV and LV domains
Collaborate closely with battery, motor, avionics, software, and thermal teams to ensure integrated, reliable system design
Drive component selection, supplier evaluation, and validation planning for power electronics and distribution systems
Oversee simulation, modeling, and analysis activities (e.g., MATLAB/Simulink, PLECS, SPICE) for system behavior, loss estimation, and transient response
Develop and execute validation strategies, including module bring-up, EMC compliance, thermal testing, and integrated testing
Support functional safety analysis and documentation (e.g., ISO 26262, DO-160, ARP4754, DFMEA)
Maintain technical documentation and lead design reviews across project milestones

Fulltime

New

Avionics Systems Architect

This position is opened in the Avionics and Systems Architecture Department with...

Location

France , Marignane

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Engineer in Avionics, or Electronics or Systems Engineering
Experience: 5-10 years or more
Languages: Fluent in French and English
Rigorous and methodic
Customer satisfaction oriented
Open-minded and welcome problems attitude
Dynamic and having a strong team spirit mindset
Able to work in complex environments and to manage easily priorities/urgencies
Transparent and report issue as soon as it appears
Positive and constructive

Job Responsibility

Anticipate future needs and possible avionics solutions
Ensure retrofit & upgrades of our fleet in service
Keep our avionics up-to-date
Define, develop and certify the most effective avionics solutions
Participate to avionics strategy at system level
Contribute to technology roadmaps
Contribute to System Engineering set-up for Avionics
Manage transverse functions
Collect stakeholders needs
Define operational concepts and use-cases for the overall avionics

What we offer

Attractive salary
Agreements on success and profit sharing schemes
Employee savings plan abounded by Airbus
Employee stock purchase plan on a voluntary basis
Extra days-off for special occasions
Holiday transfer option
Staff council offering many social, cultural and sport activities and other services
Complementary health insurance coverage (disability, invalidity, death)
Depending on the site: health services center, concierge services, gym, carpooling application
Great upskilling opportunities and development prospects with unlimited access to +10.000 e-learning courses

Fulltime

Avionics Lead Engineer

Airbus

Location:
India , Bangalore

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
February 21, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Avionics Lead Engineer

Electrical and Avionics Systems Engineer

Subject-Matter Expert Avionics Engineer

Design Lead, Airframe

Airframe IPT Lead

Hardware Integration Engineer

Hardware Integration Engineer (Mechanical)

Electrical Lead, Power Architecture

Avionics Systems Architect

Avionics Lead Engineer

Airbus

Location:India , Bangalore

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:February 21, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Avionics Lead Engineer

Electrical and Avionics Systems Engineer

Subject-Matter Expert Avionics Engineer

Design Lead, Airframe

Airframe IPT Lead

Hardware Integration Engineer

Hardware Integration Engineer (Mechanical)

Electrical Lead, Power Architecture

Avionics Systems Architect

Location:
India , Bangalore

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
February 21, 2026