CrawlJobs Logo

Avionics Integration Engineer

astrion.us Logo

Astrion

Location Icon

Location:
United States , Dayton

Category Icon
Category:
IT - Software Development

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

Astrion has an exciting opportunity for a Avionics Integration Engineer, Journeyman located at Wright Patterson Air Force Base, OH. The Avionics Integration Engineer, will provide integration support to the F-15 Division. The F-15 Division is responsible for management and professional services, engineering and technical services, and studies, analyses and evaluations to accomplish the unit’s mission to design, develop, integrate, test, produce, deploy, modernize, sustain and support U.S. and FMS F-15 fighter aircraft weapon systems and subsystems.

Job Responsibility:

  • Serve as an avionics engineer with emphasis in integration of radar and EW sensors
  • Develop/review/update program documentation for avionics engineering requirements
  • Assist in drafting systems/subsystem specifications and engineering documents
  • Be responsible for development and test of program system hardware and software and its integration
  • Attend technical reviews and provide technical advice
  • Review system specific test plans and participate in testing
  • Support and conduct performance, cost, life-cycle, producibility, maintainability, supportability, reliability, risk, and scheduling trade-off studies
  • Support hardware/software development and related system ground and flight test activities
  • Support and conduct systems analyses
  • Perform analyses of avionics and subsystems
  • Accomplish data processing including centroiding, tracker, timing, data loading, software
  • Accomplish MS&A of radar, targets, and clutter/weather
  • testing and evaluation of radar system performance
  • Support Aircraft Information Management Systems (AIMS) requirements/testing/certification and spectrum management
  • Use knowledge of Communication Navigation Surveillance/ Air Traffic Management (CNS/ATM) requirements
  • Perform technical activities associated with radar waveforms and signal and data processing techniques
  • Apply understanding of aeronautical vehicle systems, software, and/or airborne or ground systems avionics

Requirements:

  • Minimum of five (5) years of experience
  • ABET-accredited bachelor’s degree in engineering
  • DoD Secret clearance
  • Ability to work independently and apply proper procedures and processes
  • Ability to problem solve and troubleshoot
  • Knowledge of avionics engineering in support of avionics subsystem definition, development, integration, verification methods, sustainment, Modeling, Simulation and Analysis (MS&A), T&E, and airworthiness certification
  • Knowledge of radar theory and principles
  • Understanding of radar design, development, and implementation process
What we offer:
  • Competitive salaries
  • Continuing education assistance
  • Professional development
  • Multiple healthcare benefits package options
  • 401K with employer matching
  • Competitive time off policy
  • Federally recognized holiday schedule

Additional Information:

Job Posted:
March 21, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Astrion - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Avionics Integration Engineer

Hardware Integration Engineer

Merlin is a venture backed aerospace startup building a non-human pilot to enabl...
Location
Location
United States
Salary
Salary:
Not provided
merlinlabs.com Logo
Merlin Labs
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS in Electrical or Aerospace Engineering
  • 10+ years of relevant systems level electrical systems and integration design experience for the aviation, aerospace, industries
  • Experience integrating and testing avionics systems
  • Experience with component specification, supplier interaction, and procurement processes
  • Experience integrating and debugging systems containing COTS/MOTS modules, custom circuits, software, sensors, and human / machine / graphical user interfaces
  • Working knowledge of integrating various components using standard interface protocols such as ARINC 429, RS-232, RS-422, and RS-485
  • Familiarity with lab test equipment, including oscilloscopes, multimeters, current probes, data acquisition, and bus analyzers
  • Experience with wire harness design and connector component selection and sourcing
  • Outstanding organization, analytical, and problem-solving skills
  • Excellent written, verbal, and presentation communication skills
Job Responsibility
Job Responsibility
  • Lead and perform avionics systems integration and testing of components of our aircraft autonomy system
  • Write and maintain electrical systems requirements documents, electrical load analyses, and other related documents for prototyping and certification
  • Write, maintain and execute test plans and design verification documents
  • Specify, identify, integrate and verify Commercial/Modified-Off-the-Shelf (COTS/MOTS) electronic subsystems for aircraft installation
  • Prepare and release electrical design and fabrication documentation for partners, vendors, and customers
  • Work with suppliers, managing their performance to requirements, budget and schedule
  • Provide guidance to other electrical engineers and technicians across the team working on electrical and electronic aspects of the system architecture and schematics including power, computer, electro-mechanical, interconnect systems, wireless communications, cable harnesses, packaging, cable routing, and user interfaces and controls
  • This position may require up to 50% travel to both domestic and international locations to support hardware integration
What we offer
What we offer
  • health
  • dental
  • life
  • unlimited vacation
  • 401k with match
  • Fulltime
Read More
Arrow Right

Avionics Engineer

Mainsail Group is looking for an experienced Avionics Integration Engineer to jo...
Location
Location
United States , Hanscom AFB, MA
Salary
Salary:
Not provided
mainsailgroupinc.com Logo
MAINSAIL Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Engineering degree
  • 15 years of experience in aeronautical engineering and/or weapon systems development and integration
  • 8 years of experience in support of DoD acquisition contracts
  • Progressive experience in engineering development projects, to include engineering documentation, design drawings, engineering changes and notices, and planning/conducting design audits
  • Secret security clearance (minimum)
  • Top Secret security clearance (preferred)
  • Prefer experience with major aircraft development/integration programs
Job Responsibility
Job Responsibility
  • Provide expertise in aircraft structures, subsystems, and mechanical systems
  • Provide technical input on aircraft aerodynamic design and performance
  • Support processes to acquire and sustain a commercial derivative aircraft
  • Evaluate the EMD contractor's aircraft system and subsystem design
  • Evaluate and assess the EMD contractor's design and deliverables
  • Develop and implement an Aircraft Integrity program and a Corrosion Prevention and Control program
  • Manage implementation and completion of Aerial Refueling Certification and clearance processes
  • Analyze and manage Size, Power, Cooling, and Weight and Balance designs
  • Support test planning and execution and review of associated documents
  • Prepare technical documents, management reports, and conduct technical presentations
  • Fulltime
Read More
Arrow Right

Electrical and Avionics Systems Engineer

ITPS is seeking a full-time Electrical Engineer to join our engineering team in ...
Location
Location
Canada , London, Ontario
Salary
Salary:
Not provided
itpscanada.com Logo
ITPS (CANADA) LTD
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Solid understanding of aircraft electrical systems, power distribution, and signal integrity
  • Hands-on experience with avionics interfaces and protocols: ARINC 429, RS-232/422/485, CAN bus
  • Experience with LRU integration, signal routing, grounding/shielding practices, and EMI/EMC considerations
  • Ability to work with aircraft sensors (AHRS, IMUs, magnetometers, electro-optical payloads) and mission/display computers
  • Familiarity with technical drawing tools (e.g., MS Visio, Enovia) and engineering design platforms
  • Understanding of regulatory and airworthiness documentation standards in aerospace systems
  • Proficiency with tools such as: MS Office, Navision, Enovia, ARINC scheduling software
  • Experience with Matlab or IADS for system analysis and data visualization
Job Responsibility
Job Responsibility
  • Lead design and development of aircraft electrical systems from concept to production
  • Prepare and maintain engineering documentation: I/O definitions, schematics, interface control documents (ICDs), wiring diagrams
  • Design and review custom PCB layouts and avionics harnessing
  • Oversee component selection, BOM management, and procurement coordination
  • Plan and conduct bench-level and on-aircraft testing, including functional verification, continuity checks, and system validation
  • Collaborate with avionics, flight test, and systems teams for seamless integration into flight platforms
  • Provide technical support during installation, troubleshooting, and acceptance testing phases
  • Fulltime
Read More
Arrow Right

Staff Flight Deck Avionics Systems Engineer

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , San Jose
Salary
Salary:
151680.00 - 189600.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 8+ years of experience in Integrated avionics systems development, integration and/or installation
  • Experience with FMS and FGS functional definition
  • Good understanding of aviation protocols (A429, Ethernet, RS-232/RS-422, Discretes, Analogs, CAN bus)
  • Experience on one or more programs with a formal Systems Engineering process
  • Experience with: 14 CFR Part 23 and/or 25 Certification, ARP-4754/ARP-4761, DO-254, DO-178b/c
  • Experience with functional and non-functional requirement definition for Integrated Avionics computing and networking components
  • Experience executing formal Validation and Verification activities in a civil aerospace program
  • Significant Experience with Requirements Management Tools such as Polarian and/or DOORS
  • Excellent verbal and written interpersonal communication
  • Passion for learning and problem solving
Job Responsibility
Job Responsibility
  • Perform a wide range of tasks including: requirements development, system modeling, interface definition, safety analysis, verification procedure creation and test execution
  • Ensure Flight Management (FMS) and Flight Guidance (FGS) Subsystem(s) requirement sets are complete and correct, with traceability to and fulfilling higher-level requirements
  • Perform Integration activities of the Avionics System including the Flight Management (FMS) and Flight Guidance (FGS)Subsystems in the Labs
  • Assist with definition of installation and qualification requirements for the FMS & FGS equipment within the Avionics System
  • Work with Pilots, Operators, and Human Factors to optimize the FMS and FGS functionality
  • Coordinate integration of the FMS & FGS Subsystem with other Aircraft Systems (Flight Controls, High-Voltage Power, etc, …)
  • Manage and develop supplier relationships
  • Collaborate with other System Engineers to ensure the fully integrated aircraft meets its requirements and is optimized
  • Coordinate Integrated Avionics related development, integration and verification activities between Archer teams and suppliers
  • Based in Archer HQ, San Jose, CA. Travel: 10% or less
  • Fulltime
Read More
Arrow Right

Hardware Integration Engineer (Mechanical)

Merlin is a venture backed aerospace startup building a non-human pilot to enabl...
Location
Location
United States
Salary
Salary:
Not provided
merlinlabs.com Logo
Merlin Labs
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS in Mechanical, Electro-Mechanical, or Aerospace Engineering and 5+ years technical work experience
  • Advanced modeling experience with tools such as SolidWorks, Catia, OnShape, Fusion, or Creo
  • Proven experience with rapid design cycles: taking a design from concept through detailed design, build, and test
  • Experience leading activities such as mechanism design, controls design and analysis, environmental analysis (thermal, vibration, airflow), and structural analysis
  • Outstanding organization, analytical, and problem-solving skills
  • Excellent written, verbal, and presentation communication skills
Job Responsibility
Job Responsibility
  • Design, integrate, and test avionics and control components for aircraft and test labs
  • Oversee design and analysis tasks for system integration including stress and model analyses
  • Provide CAD work in support of design activities, including application of industry best-practices for GD&T
  • Support and participate in testing activities – component, system development, and system certification – as needed including test plan creation, data analysis, and test report generation and documentation
  • Prepare and coordinate mechanical design and fabrication drawings and related documents
  • This position may require up to 25-50% travel, sometimes with short notice, to both domestic and international locations to support aircraft and system integration and testing
What we offer
What we offer
  • health, dental, life, unlimited vacation, and 401k with match
  • Fulltime
Read More
Arrow Right

Avionics Systems Engineer

Would you like to contribute to the integration of safety-critical embedded syst...
Location
Location
Canada , Montréal
Salary
Salary:
Not provided
https://www.soprasteria.com Logo
Sopra Steria
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • University degree in Electrical, Computer, Aerospace Engineering or equivalent
  • Relevant experience in the integration and/or validation of avionics systems
  • Knowledge of avionics system architectures
  • Significant experience with DOORS is mandatory
  • Strong understanding of qualification, safety assessment, and certification standards, particularly military ones such as MIL-STD-810, MIL-HDBK-217, or similar
  • Ability to read wiring diagrams and interpret technical documentation
  • Proficiency in French and English (bilingualism is an asset)
  • Strong analytical skills, attention to detail, autonomy, and a good team spirit
Job Responsibility
Job Responsibility
  • Ensure the functional integration of avionics systems (FMS, GPS, VHF, ADS-B, TCAS, etc.) on test benches, simulators, or aircraft
  • Configure and validate embedded systems through ground testing (regression, non-regression, environmental, EMI testing, etc.)
  • Diagnose and resolve system, software, or interface issues (avionics/cabin/network)
  • Develop and execute test procedures based on system requirements (ARP4754A, DO-178C, DO-160G)
  • Analyze test results and document validation reports, non-conformity reports, and traceability matrices
  • Interpret wiring diagrams, Interface Control Documents (ICDs), and functional logic schematics
  • Participate in technical reviews (PDR, CDR, TRR) with system, development, flight test, and certification teams
  • Contribute to the setup and deployment of test and automation tools (Python, TestStand, LabVIEW, etc.)
  • Collaborate with certification teams to ensure compliance with civil or military standards
What we offer
What we offer
  • Hybrid Work
  • Industry leading medical, dental, and vision Insurance
  • Access to a telemedicine service
  • RRSP program
  • Personal and sick days
  • Recreation room with pool table and foosball table
  • Fulltime
Read More
Arrow Right

Subject-Matter Expert Avionics Engineer

Phalanx Griffon (PG) is the Air Force’s open‑architecture airborne node linking ...
Location
Location
United States , Dayton
Salary
Salary:
Not provided
dcscorp.com Logo
DCS Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • U.S. Citizenship
  • Active TS/SCI clearance
  • High School Diploma plus 20 years of experience
  • Must have been directly involved with avionics engineering and have focused on this technical area for over 20 years
  • has published work or work samples showing that they are an expert in this field
  • have participated in technical presentations/roadshows/conferences as an expert in their respective field
  • Expert knowledge of MIL‑STD‑1553, ARINC‑429/664, Ethernet (TSN/AFDX), VPX architectures, and timing/synchronization methods
  • Demonstrated success integrating Type‑1 crypto, SATCOM/RF subsystems, and open mission systems (OMS/UCI, FACE, SOSA)
  • Hands‑on experience generating airworthiness artifacts and guiding systems through developmental & operational test
  • Proficiency with avionics E‑CAD and MBSE tools (CAMEO/MagicDraw, Rhapsody, Altium/OrCAD)
Job Responsibility
Job Responsibility
  • Define avionics integration schemes that marry Nomad VPX hardware with platform data buses (MIL‑STD‑1553, ARINC‑429/664, Ethernet TSN) and mission computers
  • Develop interface‑control documents (ICDs), signal‑flow diagrams, and timing budgets
  • ensure alignment with OMS/UCI messages and cross‑domain guard rules
  • Lead authoring of AF Form 1067s, E‑series flight‑clearance packages, and safety‑of‑flight analyses
  • Oversee DO‑254 (hardware) & DO‑178C (software) compliance artifacts where required
  • Capture avionics models in SysML/CAMEO and link to requirements, verification methods, and hardware part trees
  • Drive configuration‑control boards, red‑line incorporation, and model synchronization
  • Specify and validate wiring harnesses, signal conditioning, and power interfaces in the Integration SIL
  • Troubleshoot EMI/EMC, timing, and protocol issues
  • guide corrective actions through to flight‑test readiness
  • Fulltime
Read More
Arrow Right

Aircraft Architecture & Integration Systems Engineer

As a Systems Engineer focused on aircraft-level integration, you will work acros...
Location
Location
United States , San Jose
Salary
Salary:
160000.00 - 220000.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 8+ years of engineering experience on aerospace projects involving complex, multi-system integration
  • BS, MS, or PhD in Systems Engineering, Aerospace Engineering, Electrical Engineering, or a related field
  • Proven expertise in ARP4754A and ARP4761 processes or similar standards
  • Experience developing or managing aircraft-level requirements and architectures
  • Experience defining and managing interfaces and aviation protocols (e.g., ARINC 429, CAN)
  • Familiarity with RTCA DO-178C and DO-254 development processes
  • Experience with Polarion or other requirements management tools
  • Excellent interpersonal and communication skills for cross-functional collaboration
Job Responsibility
Job Responsibility
  • Lead or support aircraft-level systems engineering activities that cut across electric propulsion, avionics, flight controls, high voltage, structures, and other systems
  • Identify, analyze, and drive resolution of cross-system integration issues and aircraft-level risks
  • Develop and maintain aircraft-level deliverables, including the Level 1 (L1) requirements, Aircraft Description Document (ADD), Aircraft-Level Integrated Test Procedures and other configuration-defining artifacts
  • Support the definition and allocation of aircraft-level requirements down to systems and components with full traceability through architecture
  • Facilitate trade studies and design integration reviews to ensure system interfaces and performance objectives align at the aircraft level
  • Collaborate with system owners to develop and maintain consistent interface definitions and system architecture views
  • Support verification planning, test coordination, and compliance demonstrations for aircraft-level requirements
  • Work closely with the chief engineer, system owners, and stakeholders (including certification, maintainability & human factors teams) to ensure the product meets overall performance, safety, and regulatory objectives
  • Fulltime
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy