Avionics/Electronics Technician Job at Bombardier (Windsor Locks)

Technician, Avionics/Electronics

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Tucson

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Avionics / electric A/C Technical School or other substantiated equivalent
Typically 0 – 2 years avionics work experience or substantiated equivalent experience
Ability to read and understand electrical engineering drawings
Ability to effectively communicate in both written and verbal form on individual and / or aircraft status
Own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
Must obtain appropriate Ground Support Equipment Qualifications as required
Must be able to work unscheduled overtime including nonscheduled work days and holidays
Must be able to work in seasonal/inclement weather outside
Ability to obtain a Security Identification Display Area badge (SIDA) (if applicable)
A Certification if required by customer (Commercial Aircraft)

Job Responsibility

Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hangar positions)
Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner
Troubleshoot, repair, inspect, modify and service aircraft avionics, electrical and electronic equipment
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required
Assist with mechanical / electrical removals and installations
Perform other duties as assigned
May assist with maintenance at off-site locations
Assist other maintenance disciplines

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Avionics/Electronics Technician - Evening Shift

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Windsor Locks

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Avionics / electric A/C Technical School or other substantiated equivalent
Typically 2+ years' avionics work experience or substantiated equivalent experience
Ability to read and understand electrical engineering drawings
Ability to effectively communicate in both written and verbal form on individual and / or aircraft status
Own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
Must obtain appropriate Ground Support Equipment Qualifications as required
Must be able to work unscheduled overtime including nonscheduled work days and holidays
Must be able to work in seasonal/inclement weather outside
Ability to obtain a Security Identification Display Area badge (SIDA) (if applicable)
A Certification if required by customer (Commercial Aircraft)

Job Responsibility

Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hangar positions)
Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner
Troubleshoot, repair, inspect, modify and service aircraft avionics, electrical and electronic equipment
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required
Assist with mechanical / electrical removals and installations
Perform other duties as assigned
May assist with maintenance at off-site locations
Assist other maintenance disciplines

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

New

Technician, Avionics/Electronics

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Tucson

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Avionics / electric A/C Technical School or other substantiated equivalent
Typically 0 – 2 years avionics work experience or substantiated equivalent experience
Ability to read and understand electrical engineering drawings
Ability to effectively communicate in both written and verbal form on individual and / or aircraft status
Own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
Must obtain appropriate Ground Support Equipment Qualifications as required
Must be able to work unscheduled overtime including nonscheduled work days and holidays
Must be able to work in seasonal/inclement weather outside
Ability to obtain a Security Identification Display Area badge (SIDA) (if applicable)
A Certification if required by customer (Commercial Aircraft)

Job Responsibility

Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hangar positions)
Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner
Troubleshoot, repair, inspect, modify and service aircraft avionics, electrical and electronic equipment
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required
Assist with mechanical / electrical removals and installations
Perform other duties as assigned
May assist with maintenance at off-site locations
Assist other maintenance disciplines

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

New

Warehouse Operations Operator

Location

United States , Redlands

Salary:

Not provided

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

One (1) year of recent Electric Pallet Jack warehouse experience or related experience and/or training
Proficiency in operating Electric Pallet Jack and other warehouse equipment
Ability to read, write, interpret, and comprehend documents written in English
Basic math skills for performing calculations
No formal education required (No High School diploma or GED)
Must pass a drug test
Must have experience operating an Electric Pallet Jack

Job Responsibility

Operate a variety of equipment, including Electric Pallet Jack and conveyors, to move materials
Work in a metrics-driven environment, adhering to performance standards
Perform tasks that may require lifting and/or moving over 50 lbs

Fulltime

New

Material Handler

Material Handler position for a Medical Devices Company. Contract duration: 12 M...

Location

United States , Covington

Salary:

14.00 - 16.00 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

HS diploma or GED is required
2-3 years of experience operating all material handling equipment
Ability to work in a fast paced warehouse environment
Ability to read and interpret distribution documents and operational procedures / specifications
Ability to follow verbal and written instruction from supervisor
Must have good oral and written communication skills, to read and comprehend simple instructions in Basic English
Must be able to perform basic mathematical computations and apply to various operational tasks
Position requires good logic and reasoning ability
Must be free of any health conditions that would prohibit assignments to tasks that require heavy lifting, pulling, bending and or prolonged standing
Must be able to work with minimal supervision

Job Responsibility

Unload inbound trucks, verify numbers and quantities, stack boxes onto specific pallet pattern
Accept materials from other C.R. Bard divisions / departments for ethylene oxide sterilization
Verify the catalog numbers, lot numbers, quantities and expiration date as applicable and detailed in incoming procedures
Complete JD Edwards transactions utilizing IBM Data Collection scanners to receive product into Regional Sterilization
Assemble / Build sterilization loads according to defined palletization diagrams
Place Biological Indicators (BI spores) into the sterilization load
Initiate the sterilization load record documentation
Locate materials into pallet / BIN locations
Operate inventory control system, where applicable
Maintain an acceptable work area as outlined per procedure and Quality System Regulations

Fulltime

New

Quality Control Inspector

Location

United States , Research Triangle Park

Salary:

Not provided

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

Preferred: Bachelor’s degree with 3 years of preclinical medical device research experience, or 5 years of relevant work experience supporting preclinical research (e.g., LAR/surgical vet tech)
Background in data management and familiarity with medical device GLP research
Demonstrated understanding in the use of calibrated equipment, controlled drugs, and GLP data collection/retention
Must be able to identify basic non-compliance within regulations and standards

Job Responsibility

Acts as Lead Data Reviewer for internal studies, collaborating with Study Directors to ensure timely and thorough data review for GLP and Preclinical Functionality studies
Responsible for performing audits of protocols, SOPs, and quality system elements to ensure compliance with GLP regulations (21 CFR Part 58) and internal procedures
Review and ensure the accuracy and completeness of medical records, surgical records, protocols, and study data
Collaborate with staff to identify, evaluate, and recommend solutions to review and correct findings
Draft study deviations in a timely manner and incorporate Study Director impact assessments
Perform audits of protocol, SOP, and quality system elements to ensure compliance with GLP regulations and internal procedures
Ensure preclinical in-vivo studies are compliant with GLP regulations (21 CFR Part 58) and adhere to internal quality guidelines
Identify and report basic non-compliance within regulations and standards
Collaborate efficiently with different groups, managing movements between various locations around the site according to stakeholder schedules

Fulltime

New

Injection Mold Process Technician

Injection Mold Process Technician position for a Medical Device Company. 12-mont...

Location

United States , Research Triangle Park

Salary:

21.00 - 25.00 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

2-5 years of experience in a similar type of position working in the Plastics Industry
injection molding processes
2-5 years of previous injection molding process experience
Proficient skills in reading, writing, and arithmetic
Strong mechanical abilities & knowledge- preferably in the Plastics Industry, with experience in Injection Molding
Excellent analytical and problem-solving skills
candidate needs to be very detail-oriented
Excellent troubleshooting skills
Excellent computer skills
Strong communication skills interacting with all levels of a company’s hierarchy

Job Responsibility

Perform and direct the mold and material changeovers
Develop new mold processes for prototypes and production molds
Assure that mold setup, changeovers, and housekeeping standards are met
Ensure new job start-ups are correct, making any necessary adjustments
Work with molding personnel to ensure molded parts meet expected requirements, and adjust if necessary
Troubleshoot processing problems and work through issues
Verify process parameters and implement changes
Inspecting parts to ensure they meet specifics
Stop mold samplings to correct any quality issues that may arise
Review and inspect machines daily for maintenance issues and report to the maintenance department

Fulltime

New

Packaging Operations Operator 1

The production Operator I is responsible for performing, on a daily basis, all d...

Location

United States , Grayson, GA

Salary:

14.00 - 17.00 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

A minimum of 6 months of industry work experience
Strong attention to detail
Work well in a team environment
Good documentation practices
Must be willing and able to work a flexible work schedule including static or rotating shifts and overtime as required
Familiarity with computers and various software for general business functionality
Must be able to perform basic mathematical calculations
High school diploma/GED

Job Responsibility

Perform, on a daily basis, all direct and indirect activities assigned to them in the packaging area, with the ability to follow both written and verbal work instructions
Mix formulation by performing accurate measurements of chemicals into water solutions
Pack out medical device kits
Label packed kits
Clean lab ware and equipment
Operate simple machinery
Inspect product for acceptance or rejection based on pass/fail criteria
Move product on carts and pallets
Ensure finished product is packaged in accordance with procedures and Quality specifications
Inspect in-process packaging, components to ensure consistent quality and remove defective products and packaging material

Fulltime

Avionics/Electronics Technician

Bombardier

Location:
United States , Windsor Locks

Category:
IT - Administration

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
January 10, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Avionics/Electronics Technician

Technician, Avionics/Electronics

Avionics/Electronics Technician - Evening Shift

Technician, Avionics/Electronics

Warehouse Operations Operator

Material Handler

Quality Control Inspector

Injection Mold Process Technician

Packaging Operations Operator 1

Avionics/Electronics Technician

Bombardier

Location:United States , Windsor Locks

Category:IT - Administration

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:January 10, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Avionics/Electronics Technician

Technician, Avionics/Electronics

Avionics/Electronics Technician - Evening Shift

Technician, Avionics/Electronics

Warehouse Operations Operator

Material Handler

Quality Control Inspector

Injection Mold Process Technician

Packaging Operations Operator 1

Location:
United States , Windsor Locks

Category:
IT - Administration

Contract Type:
Not provided

Job Posted:
January 10, 2026