CrawlJobs Logo

Avionics Electrical Engineer

hermeus.com Logo

Hermeus

Location Icon

Location:
United States , Atlanta

Category Icon
Category:
IT - Software Development

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

91800.00 - 140250.00 USD / Year
Save Job
Save Icon
Apply Position

Job Description:

Hermeus is an aerospace and defense technology company founded to radically accelerate air travel by delivering hypersonic aircraft. The company aims to develop hypersonic aircraft quickly and cost-effectively by integrating hardware-rich, iterative development with modern computing and autonomy. This approach has been validated through design, build, and test of the company’s first combined turbojet-ramjet engine and is now being scaled through its first flight vehicle program, Quarterhorse. Hermeus is also developing Darkhorse — an uncrewed hypersonic aircraft designed to deliver unique asymmetric capabilities to the warfighter.

Job Responsibility:

  • Shape the future of commercial supersonic and hypersonic flight
  • Design, testing, and integration of GNC systems, electrical hardware, control software, power distribution, and RF communications
  • Design and test custom electrical systems for both ground test and flight applications
  • Ensure seamless integration and compatibility of designs at the sub-system and integrated system level
  • Work across disciplines to create control and instrumentation systems for engine, structural, hydraulic, and electrical systems

Requirements:

  • Bachelor's degree in Electrical Engineering
  • 1+ years of experience in multiple of the following areas: electrical hardware design, control systems, instrumentation and signal conditioning, digital communication busses, analog design and simulation, power electronics, harness design

Nice to have:

  • Master's degree in Electrical, Mechanical, Aerospace Engineering or similar disciplines
  • Demonstrated project experience with embedded design, device integration, V&V, environmental qualification and/or flight testing
  • Familiarity with test and simulation tools (DMM, Oscilloscope, power supplies, SPICE, Ansys)
  • Experience with electrical and mechanical design and version control software (Altium Designer, Siemens NX, Teamcenter, Capital Harness, Git, Teamcenter)
  • Experience with avionics devices and protocols (RS-485, ARINC-685, FPGAs, GPS, INS, D38999 style connectors, etc.)
  • Familiarity with aerospace industry standards (IPC-620, MIL-STD-810, MIL-STD-704, MIL-HDBK-516C, MIL-STD-464D, DO-160G)
  • Experience working with DC power systems (Batteries, Motors, Generators, etc.)
  • Strong analysis and troubleshooting skills
  • A bias towards action, and a willingness to work hands-on to make it happen
  • Engineering project team experience
What we offer:
  • Competitive salary and equity
  • Unlimited PTO policy
  • Paid parental leave
  • Potential for year-end bonuses
  • 100% employer-paid health care
  • 401k & Retirement Plans
  • Unlimited PTO
  • Weekly Paid Office Lunches
  • End of Year Bonuses
  • Fully stocked breakrooms
  • Stock Options
  • Paid Parental Leave

Additional Information:

Job Posted:
February 18, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Hermeus - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Avionics Electrical Engineer

Electrical and Avionics Systems Engineer

ITPS is seeking a full-time Electrical Engineer to join our engineering team in ...
Location
Location
Canada , London, Ontario
Salary
Salary:
Not provided
itpscanada.com Logo
ITPS (CANADA) LTD
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Solid understanding of aircraft electrical systems, power distribution, and signal integrity
  • Hands-on experience with avionics interfaces and protocols: ARINC 429, RS-232/422/485, CAN bus
  • Experience with LRU integration, signal routing, grounding/shielding practices, and EMI/EMC considerations
  • Ability to work with aircraft sensors (AHRS, IMUs, magnetometers, electro-optical payloads) and mission/display computers
  • Familiarity with technical drawing tools (e.g., MS Visio, Enovia) and engineering design platforms
  • Understanding of regulatory and airworthiness documentation standards in aerospace systems
  • Proficiency with tools such as: MS Office, Navision, Enovia, ARINC scheduling software
  • Experience with Matlab or IADS for system analysis and data visualization
Job Responsibility
Job Responsibility
  • Lead design and development of aircraft electrical systems from concept to production
  • Prepare and maintain engineering documentation: I/O definitions, schematics, interface control documents (ICDs), wiring diagrams
  • Design and review custom PCB layouts and avionics harnessing
  • Oversee component selection, BOM management, and procurement coordination
  • Plan and conduct bench-level and on-aircraft testing, including functional verification, continuity checks, and system validation
  • Collaborate with avionics, flight test, and systems teams for seamless integration into flight platforms
  • Provide technical support during installation, troubleshooting, and acceptance testing phases
  • Fulltime
Read More
Arrow Right

Senior Professional, Engineering, Electrical Wiring Design

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...
Location
Location
Canada , Mississauga
Salary
Salary:
Not provided
bombardier.com Logo
Bombardier
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration
  • Minimum of 10 years of relevant working experience in aerospace
  • Wiring design, wiring installation and/or wiring troubleshooting and electrical system integration knowledge
  • Strong sense of responsibility and good organization skills
  • Excellent communication skills including the ability to read/write in English
  • Good experience with CATIA V5 and CATIA V4 (CATWIRE module)
  • Experience with Capital (Mentor Graphics), PLM databases CDMA and Teamcenter an asset
  • Comfortable working with MS office suite
Job Responsibility
Job Responsibility
  • Review and approve Supplier technical engineering deliverables (ESSD/PCD) in part or in whole
  • Engage with electrical System stakeholders and manage workload scheduling
  • Provide technical engineering support on change management implementation (RFC, PCR)
  • Creation of wiring diagrams from System Definition Schematics (ESSD), preparation of Harness Reports with Harness Bill of Material (BOM) to meet customer configuration
  • Establish/improve measures to ensure/improve quality of engineering documents
  • Prepare work statements and reports (EDRN)
  • Checking of work prior to release and ensure compliance to various systems requirement
  • Select various components, connectors, backshells and other parts, involving researching parts catalogues, engineering specifications and contact with vendors if required
  • Be able to identify and manage engineering technical risks independently
  • Communicate lessons learned to other community members
What we offer
What we offer
  • Insurance plans (Dental, medical, life insurance, disability, and more)
  • Competitive base salary
  • Retirement savings plan
  • Employee Assistance Program
  • Tele Health Program
  • Fulltime
Read More
Arrow Right

Avionics Systems Engineer

Would you like to contribute to the integration of safety-critical embedded syst...
Location
Location
Canada , Montréal
Salary
Salary:
Not provided
https://www.soprasteria.com Logo
Sopra Steria
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • University degree in Electrical, Computer, Aerospace Engineering or equivalent
  • Relevant experience in the integration and/or validation of avionics systems
  • Knowledge of avionics system architectures
  • Significant experience with DOORS is mandatory
  • Strong understanding of qualification, safety assessment, and certification standards, particularly military ones such as MIL-STD-810, MIL-HDBK-217, or similar
  • Ability to read wiring diagrams and interpret technical documentation
  • Proficiency in French and English (bilingualism is an asset)
  • Strong analytical skills, attention to detail, autonomy, and a good team spirit
Job Responsibility
Job Responsibility
  • Ensure the functional integration of avionics systems (FMS, GPS, VHF, ADS-B, TCAS, etc.) on test benches, simulators, or aircraft
  • Configure and validate embedded systems through ground testing (regression, non-regression, environmental, EMI testing, etc.)
  • Diagnose and resolve system, software, or interface issues (avionics/cabin/network)
  • Develop and execute test procedures based on system requirements (ARP4754A, DO-178C, DO-160G)
  • Analyze test results and document validation reports, non-conformity reports, and traceability matrices
  • Interpret wiring diagrams, Interface Control Documents (ICDs), and functional logic schematics
  • Participate in technical reviews (PDR, CDR, TRR) with system, development, flight test, and certification teams
  • Contribute to the setup and deployment of test and automation tools (Python, TestStand, LabVIEW, etc.)
  • Collaborate with certification teams to ensure compliance with civil or military standards
What we offer
What we offer
  • Hybrid Work
  • Industry leading medical, dental, and vision Insurance
  • Access to a telemedicine service
  • RRSP program
  • Personal and sick days
  • Recreation room with pool table and foosball table
  • Fulltime
Read More
Arrow Right

Staff Flight Deck Avionics Systems Engineer

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , San Jose
Salary
Salary:
151680.00 - 189600.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 8+ years of experience in Integrated avionics systems development, integration and/or installation
  • Experience with FMS and FGS functional definition
  • Good understanding of aviation protocols (A429, Ethernet, RS-232/RS-422, Discretes, Analogs, CAN bus)
  • Experience on one or more programs with a formal Systems Engineering process
  • Experience with: 14 CFR Part 23 and/or 25 Certification, ARP-4754/ARP-4761, DO-254, DO-178b/c
  • Experience with functional and non-functional requirement definition for Integrated Avionics computing and networking components
  • Experience executing formal Validation and Verification activities in a civil aerospace program
  • Significant Experience with Requirements Management Tools such as Polarian and/or DOORS
  • Excellent verbal and written interpersonal communication
  • Passion for learning and problem solving
Job Responsibility
Job Responsibility
  • Perform a wide range of tasks including: requirements development, system modeling, interface definition, safety analysis, verification procedure creation and test execution
  • Ensure Flight Management (FMS) and Flight Guidance (FGS) Subsystem(s) requirement sets are complete and correct, with traceability to and fulfilling higher-level requirements
  • Perform Integration activities of the Avionics System including the Flight Management (FMS) and Flight Guidance (FGS)Subsystems in the Labs
  • Assist with definition of installation and qualification requirements for the FMS & FGS equipment within the Avionics System
  • Work with Pilots, Operators, and Human Factors to optimize the FMS and FGS functionality
  • Coordinate integration of the FMS & FGS Subsystem with other Aircraft Systems (Flight Controls, High-Voltage Power, etc, …)
  • Manage and develop supplier relationships
  • Collaborate with other System Engineers to ensure the fully integrated aircraft meets its requirements and is optimized
  • Coordinate Integrated Avionics related development, integration and verification activities between Archer teams and suppliers
  • Based in Archer HQ, San Jose, CA. Travel: 10% or less
  • Fulltime
Read More
Arrow Right

Hardware Integration Engineer

Merlin is a venture backed aerospace startup building a non-human pilot to enabl...
Location
Location
United States
Salary
Salary:
Not provided
merlinlabs.com Logo
Merlin Labs
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS in Electrical or Aerospace Engineering
  • 10+ years of relevant systems level electrical systems and integration design experience for the aviation, aerospace, industries
  • Experience integrating and testing avionics systems
  • Experience with component specification, supplier interaction, and procurement processes
  • Experience integrating and debugging systems containing COTS/MOTS modules, custom circuits, software, sensors, and human / machine / graphical user interfaces
  • Working knowledge of integrating various components using standard interface protocols such as ARINC 429, RS-232, RS-422, and RS-485
  • Familiarity with lab test equipment, including oscilloscopes, multimeters, current probes, data acquisition, and bus analyzers
  • Experience with wire harness design and connector component selection and sourcing
  • Outstanding organization, analytical, and problem-solving skills
  • Excellent written, verbal, and presentation communication skills
Job Responsibility
Job Responsibility
  • Lead and perform avionics systems integration and testing of components of our aircraft autonomy system
  • Write and maintain electrical systems requirements documents, electrical load analyses, and other related documents for prototyping and certification
  • Write, maintain and execute test plans and design verification documents
  • Specify, identify, integrate and verify Commercial/Modified-Off-the-Shelf (COTS/MOTS) electronic subsystems for aircraft installation
  • Prepare and release electrical design and fabrication documentation for partners, vendors, and customers
  • Work with suppliers, managing their performance to requirements, budget and schedule
  • Provide guidance to other electrical engineers and technicians across the team working on electrical and electronic aspects of the system architecture and schematics including power, computer, electro-mechanical, interconnect systems, wireless communications, cable harnesses, packaging, cable routing, and user interfaces and controls
  • This position may require up to 50% travel to both domestic and international locations to support hardware integration
What we offer
What we offer
  • health
  • dental
  • life
  • unlimited vacation
  • 401k with match
  • Fulltime
Read More
Arrow Right

Ordnance Electric Support Technician

This position will be supporting Air Platforms Ground Test and Flight Tests effo...
Location
Location
United States , Patuxent River
Salary
Salary:
53575.00 - 91225.00 USD / Year
dcscorp.com Logo
DCS Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • U.S. Citizenship is required
  • A High School Diploma or GED plus 5 years of experience is required
  • Active Secret Clearance on Day One with the ability to obtain and hold a TS/SAP clearance
  • Aircraft and weapon ordnance knowledge
  • At least one of the following: (1) Completion of a technical school, trade school, or advanced armed services technical school curriculum in electricity, electronics, avionics, mechanics, armaments/ordnance, or engineering technology
  • (2) Completion of at least 30 semester hours of course studies at an accredited college or university in an engineering, scientific, or technical curriculum
  • (3) An associate’s degree in Electronics, Electronics Engineering, Electronics Technology, Electrical Engineering, Engineering or General Engineering
Job Responsibility
Job Responsibility
  • Following specific instructions, assembles or constructs simple or standard equipment or parts, servicing or repairing simple instruments or equipment
  • Conducting a variety of tests using established methods, preparing test specimens, adjusting and operating equipment, recording test data, and pointing out deviations resulting from equipment malfunction or observational errors
  • Extracting engineering data from various prescribed but non-standardized sources, processing the data following well-defined methods including elementary algebra and geometry, and presenting the data in prescribed form
  • Fulltime
Read More
Arrow Right

Flight Test Instrumentation Specialist

Location
Location
Canada , London
Salary
Salary:
120000.00 - 130000.00 CAD / Year
itpscanada.com Logo
ITPS (CANADA) LTD
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree or diploma in electrical engineering, avionics, aerospace engineering, or a related field
  • 5+ years experience with aircraft systems, flight test environments, and telemetry
  • Four years of on-the-job or company apprenticeship training is required
  • Knowledge of data acquisition systems such as IADS
  • Familiarity with environmental sensors, strain gauges, thermocouples, and pressure transducers
  • Ability to work in flightline and hangar environments with strong safety awareness
  • Instrumentation system availability and reliability during flight test campaigns
  • Ability to travel from time to time to service company requirements
Job Responsibility
Job Responsibility
  • Defining instrumentation requirements in collaboration with test engineers and project managers
  • Designing signal conditioning, data acquisition, and sensor integration solutions
  • Preparing wiring diagrams, sensor lists, and instrumentation layouts
  • Supervising or performing the installation of sensors and data acquisition systems in compliance with airworthiness requirements
  • Calibrating sensors and verifying system accuracy before flight
  • Operating ground station and onboarding data systems during flight and ground tests
  • Monitoring real-time data and ensuring accurate logging and storage
  • Performing pre-flight and post-flight checks
  • Diagnosing and resolving instrumentation issues during test campaigns
  • Maintaining detailed records of instrumentation configurations, calibrations, and system health
What we offer
What we offer
  • Eligible for discretionary bonuses and/or salary increases in accordance with company policy
  • Company contributory medical top-up scheme/ group health and dental benefits after successfully completing a 3-month probationary period
  • Eligible for Employment Assistance Program
  • Eligible for basic life, AD&D insurance
  • Eligible for three weeks’ paid vacation annually
  • Eligible for travel insurance
  • Fulltime
Read More
Arrow Right

Electrical Lead, Power Architecture

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , San Jose
Salary
Salary:
163200.00 - 204000.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Master’s degree in Electrical Engineering, Power Electronics, or a related discipline
  • 7+ years of experience in power system design for EV, aerospace, or similar high-reliability applications
  • Strong background in: HV inverter and converter design (400V–1000V+)
  • LV system architecture and power distribution
  • Integration of motors, generators and control systems
  • Proficiency in system simulation, schematic capture, and hardware validation
  • Experience with wide-bandgap devices (SiC, GaN) and modern digital control platforms (MCUs, DSPs, FPGAs)
  • Systems-level thinking and multidisciplinary collaboration
  • Strong technical communication and documentation skills
  • Ability to lead cross-functional efforts and mentor junior engineers
Job Responsibility
Job Responsibility
  • Lead the design and architecture of HV propulsion inverter and generator systems, including semiconductor topology, switching control, EMI, and thermal performance
  • Architect the LV electrical system, including DC/DC converters, power distribution, auxiliary loads, grounding, and redundancy
  • Contribute to architecture definition, trade studies and help manage system-level electrical requirements and interfaces across HV and LV domains
  • Collaborate closely with battery, motor, avionics, software, and thermal teams to ensure integrated, reliable system design
  • Drive component selection, supplier evaluation, and validation planning for power electronics and distribution systems
  • Oversee simulation, modeling, and analysis activities (e.g., MATLAB/Simulink, PLECS, SPICE) for system behavior, loss estimation, and transient response
  • Develop and execute validation strategies, including module bring-up, EMC compliance, thermal testing, and integrated testing
  • Support functional safety analysis and documentation (e.g., ISO 26262, DO-160, ARP4754, DFMEA)
  • Maintain technical documentation and lead design reviews across project milestones
  • Fulltime
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy