Avionic Supervisor Job at Morson Talent (Coningsby)

Avionic Role Equipment Supervisor

Morson Edge are currently seeking an Avionic Role Equipment Supervisor to join t...

Location

United Kingdom , Yeovil

Salary:

Not provided

Morson Talent

Expiration Date

Until further notice

Requirements

Educated to a minimum of BTEC level 3 in an aviation related subject or have completed a recognised aircraft engineering training followed by significant relevant experience
Knowledge and experience of helicopter maintenance operations, supply chain and technical support processes, including practical experience of forward operational support
Experience and understanding of the military helicopter operating environment and command structure, and of deployment and operational planning
Self-motivated, able to take initiatives and work within teams
HLSEI Qualified
Maintain a full driving licence including category D1 and E, with the necessary classifications required for towing a trailer, and hold a valid Airfield Driving Permit

Job Responsibility

Conduct and co-ordinate the required inspections, maintenance and documentation, including IT systems on Wildcat AH and HMA, Role Equipment (RE), Task Essential Equipment (TEE) and Helicopter Underslung Load Equipment (HUSLE) for Wildcat FLC’s
Maintain RE, TEE and HUSLE to support Wildcat operations
Control, management, prioritization and supervision of RE, TEE and HUSLE maintenance, servicing, defect rectification and modification
Manage the Wildcat RE, TEE and HUSLE range and scale to meet the Wildcat CASP allowance, ensuring all GOLDesp action is completed appropriately
Provide subject matter expert advice on the configuration, storage and maintenance, servicing and defect rectification of RE, TEE and HUSLE to Squadron Support Sections
Carry out tasks in a supervisory role within the WMS Wildcat Role Equipment Section
Providing Future Air to Surface Guided Weapon (FASGW) support, for the servicing, control and distribution of FASGW Role Equipment
Maintaining HUSLE Currency
Deputise for the WMS Wildcat RE Supervisor in their absence

Fulltime

Avionics Operations Supervisor, Aircraft Maintenance

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Opa Locka

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Have (typically) 5 years of experience in performing aircraft heavy/line maintenance and inspection procedures
Be thoroughly familiar with aircraft inspection system & procedures and avionics/electrical work
Have leadership experience
Aircraft Maintenance preferred
Possess an A&P certificate or certificated under FAR (part 65)
Be familiar with aircraft inspection system & procedures
Be familiar with Environmental, Health & Safety rules and regulations
Have excellent interpersonal and customer service skills
Demonstrate effective leadership and coaching skills with the ability to develop people
Have strong organizational and planning skills

Job Responsibility

Supervise assigned aircraft maintenance employees and responsible for the daily and overall operations of the aircraft maintenance department, to include safety, schedules, personnel, and quality
Encourage and promote a safe work environment by supervising a safety/security program
Perform supervisory responsibilities such as performance & development management, time keeping, hiring, dismissals and lead/coordinate daily meetings
Coordinate the completion of all planned and ad-hoc maintenance
Ensure that work is performed in accordance with Repair Station/Federal Aviation Regulations (FARs)
Monitor housing and facilities safety requirements and report any insufficiency
Engage with customers regarding Aircraft Maintenance (where required)
Identify and communicate best practices and champion continuous improvement initiatives

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Avionics Shop Manager

As a Manager of the Avionics Build you will have a unique opportunity to build a...

Location

United States , Los Angeles

Salary:

138125.00 - 230000.00 USD / Year

Hermeus

Expiration Date

Until further notice

Requirements

Experience with avionics or aerospace manufacturing standards (e.g., IPC-A-610, IPC/WHMA-A-620, NASA-STD-8739)
3+ years of experience in a production leadership role in aerospace, electronics, or a high-reliability manufacturing environment
Direct experience managing or supporting teams building wire harnesses or electronic assemblies
Strong technical background in electronics or harness design, build, or test

Job Responsibility

Build a team that delivers the flight and development harnessing, and electrical subassembly/component built and tested ready for aircraft integration
Ownership of avionics development test assets including environmental testing
Harness component innovation, design, and qualification
Manage a team of supervisors, technicians, and engineers that represent avionics harness and electro-mechanical assembly manufacturing in a development environment
Develop and/or source new tools and capital equipment to drive harness manufacturing new heights of performance
Evangelize and drive design for manufacturing best practices and design for test with design engineers and test engineers
Lead the overall manufacturing development strategy for the areas under ownership for key metrics: quality, delivery, and cost. Actively measure team’s performance against these metrics

Fulltime

Avionics Technician Lead, MQ-9

The MQ-9 Avionics Technician Lead is a highly qualified and skilled aircraft ele...

Location

Japan , Iwakuni

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

Active Secret US Government Clearance within the last 12 months
High School Diploma or have completed relevant military and/or vocational technical school curriculum
Eight (8) years of actual Aircraft Avionics and/or GCS maintenance experience required
Three (3) years of experience on MQ-9 Aircraft and/or GCS, as an Avionics Technician
Advanced knowledge of basic and complex mechanical maintenance and repair
Advanced knowledge of technical publications related to aircraft mechanical maintenance
Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems
Know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have an advanced understanding of applicable systems
Have been designated a CDI or Red-X inspector for MQ-9 aircraft
Able to inspect and operate ground support and auxiliary equipment

Job Responsibility

Exercise independent judgment and lead a team of avionics technicians to complete daily aircraft maintenance tasks based on priorities set by their assigned supervisor
Apply expert technical knowledge to solve complex problems by interpreting technical publications, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs
Performs all daily launch/recovery duties in support of operational requirements
Maintain assigned MQ-9 aircraft electrical generators, load banks, starters, relays, batteries, actuators, circuit breakers, switches, and aircraft instruments
Apply advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers’ manuals or similar documents
Work typically requires an understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment
Make entries in aircraft logs and records, attend shift change maintenance meetings, perform as a QA, and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts
Apply advanced technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities
Use common and complex test instruments in the performance of assigned duties
Provides training to lower-level avionic technicians

Fulltime

Maintenance Quality Inspector

Job Description: Certification of Maintenance tasks on Airframe Engine or Avioni...

Location

Taiwan , Taichung

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Possess a valid B1 / B2 / FAA license
Ability to utilize publications and manuals for every maintenance task assigned
To execute every maintenance task assigned with least supervision and guidance but with high accuracy and quality
Capability in time management and ability in identifying and prioritizing all the aircraft maintenance related and non-aircraft maintenance related tasks assigned to him by his supervisors
Must be able and willing to work on shifts

Job Responsibility

Certification of Maintenance tasks on Airframe Engine or Avionic Systems in accordance with approved data
Responsible for in-progress and final quality control technical inspections during maintenance, repair, modification, rework and overhaul of AS365 aircraft, its components, and component parts
Ensure all required inspection items (RII) are completed and documented properly
Responsible for quality control technical inspection of aircraft components, parts, and systems of the AS365 helicopters
Certify maintenance activities
Perform quality and safety inspections of on-site equipment and tools used in aircraft maintenance
Perform special aircraft and component technical inspections as such ASB, SB
Inspect and correct maintenance forms and records used in the performance of maintenance work to verify compliance with appropriate reference and other publications
Provide technical guidance, instruction, and interpretation of written instructions and procedures to aircraft technicians to ensure high quality work

Fulltime

B2 Licensed Engineer

UK Military Flying Training System (Rotary Wing) B2 Certifying Engineer, Shawbur...

Location

United Kingdom , Shawbury

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

CAA Part 66 B2 Licence
Thorough knowledge of helicopter avionic and electrical systems
Knowledge of specialised test equipment relating to avionic and electrical systems
Up to date knowledge of CAA regulations, particularly Pt 145, Part M Continued Airworthiness Management (CAM)
Up to date knowledge of Flight/Airport Operations
Up to date knowledge of Aircraft Line Maintenance
Experience of Flight Operations and Line Maintenance
Must have the right to remain and to work in the UK
DBS Security Clearance and eligible for SC clearance

Job Responsibility

Certification of line, non-routine maintenance and repair on Airbus H135/H145 rotorcraft
Provide engineering operational support to Flight Operations
Accomplishment of maintenance inspections and repairs as directed by nominated LAE Supervisor
Work as a team leader and to high standards to ensure continued safe operation of the aircraft
Completion of maintenance, including avionic and electrical systems
Replacement of avionic line replaceable units, requiring simple tests to prove their serviceability
Supervision of avionic and electrical fitters and the certification of their work
Conduct off-aircraft avionic and electrical technical work in Av workshop as required
Assist in day to day running of the aircraft Hangar, including aircraft movement and general housekeeping responsibilities
Maintain aircraft availability levels of >98% at Shawbury (including deployments)

What we offer

Private Medical Insurance (Bupa) – single cover for employees paid by the company
Pension: Employees are auto-enrolled into the Airbus Group UK Retirement Fund. Initially, AH contributes 6%, employee 4% basic
Share Incentive Plan and ESOP. Annual share schemes at company discretion
Success Share, Discretionary Group bonus scheme (conditions apply)
Bikes to Work (up to £3,000) (employee purchase scheme)
Technology ( employee purchase scheme)
Mydrive (employee car purchase scheme)
Den-Plan (employee purchase scheme)
Health-care Cash Scheme
Personal Accident Insurance (employee purchase scheme)

Fulltime

Aircraft Mechanic III/Flight Engineer

The Aircraft Mechanic III/Flight Engineer performs assigned flight duties on P3 ...

Location

United States , Hampton

Salary:

Not provided

Yulista Holdings

Expiration Date

Until further notice

Requirements

High School Diploma or equivalent required
Experience supporting a NASA/DoD contract
Knowledge of commonly used concepts, practices, and procedures within the field required
Must have your own required tools
Must have the ability to obtain and maintain a Government Security Clearance
Shall require the following: Federal Aviation Administration (FAA) Airframe and Powerplant certification with Flight Engineer certification in turbo propeller powered aircraft. OR FAA A&P certification with four years of active-duty military experience as a mechanic on a P-3 Orion aircraft operated under USC Title 10

Job Responsibility

Perform maintenance on aircraft, including avionics, mechanical systems, and/or ground support equipment
Repair, inspect and maintain structural, mechanical, and electrical elements of the aircraft
Provide oversight and can direct and train others in the completion of aircraft related maintenance tasks
Troubleshoot systems as required to meet customer needs
Document maintenance as per Quality Assurance (QA) and established regulatory requirements
Perform regular Foreign Object Damage (FOD) walks
Maintain control tools. Report missing, lost, found, or unattended tools to the supervisor. Inventory and inspect tools on a regular basis and replace worn or broken tools
Comply with safety rules and regulations while performing day to day maintenance. Promptly report all accidents, injuries, safety violations, and/or unsafe practices or procedures to supervisor
Enter in the maintenance records description of the work performed and verify the work was performed satisfactorily

Fulltime

Electro-Mechanical Avionics Technician Level 2

For us, working at Safran is more than just a job; it's a passion. There's the u...

Location

United States , Grand Prairie

Salary:

Not provided

Assessfirst

Expiration Date

Until further notice

Requirements

High school diploma or general education degree (GED)
Two (2) or more years of related work experience in electro-mechanical repair, maintenance, or production
Proficiency in using production and repair tools, workbenches, instrumentation, and precision measuring skills
Ability to understand and apply both Metric and ASME torque standards, properly use and calibrate torque wrenches, and measure with calipers, micrometers, depth gauges, and CMMs
Familiarity with soldering techniques on electronic and electromechanical components
Working knowledge of FAA regulations, understanding of quality, CMM requirements, and effective documentation practices
Ability to read and interpret technical manuals, drawings, and specifications
Strong attention to detail, accuracy, and organizational skills
Basic level of proficiency with Microsoft Office Suite (Outlook, Word, Excel)
Consistent compliance with safety rules and Personal Protective Equipment (PPE) requirements

Job Responsibility

Conduct standard testing procedures on various equipment and validate the results
Perform repairs on aviation units in compliance with FAA regulations and in accordance with the Component Maintenance Manual (CMM) requirements
Disassemble, clean, and visually inspect parts to identify issues or wear
Reassemble parts, ensuring all measurements meet specified tolerances and requirements
Accurately track and document all activities, maintaining proper control of parts
Help maintain shop compliance with regulatory and quality standards
Contribute to process improvements aimed at reducing cycle time
Ensure strict adherence to quality standards, with a strong emphasis on customer satisfaction
Apply maintenance manuals to evaluate and determine the acceptability of components
Regularly update work order information in the ERP system

Fulltime

Avionic Supervisor

Morson Talent

Location:
United Kingdom , Coningsby

Category:
IT - Administration

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 15, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Avionic Supervisor

Avionic Role Equipment Supervisor

Avionics Operations Supervisor, Aircraft Maintenance

Avionics Shop Manager

Avionics Technician Lead, MQ-9

Maintenance Quality Inspector

B2 Licensed Engineer

Aircraft Mechanic III/Flight Engineer

Electro-Mechanical Avionics Technician Level 2

Avionic Supervisor

Morson Talent

Location:United Kingdom , Coningsby

Category:IT - Administration

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 15, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Avionic Supervisor

Avionic Role Equipment Supervisor

Avionics Operations Supervisor, Aircraft Maintenance

Avionics Shop Manager

Avionics Technician Lead, MQ-9

Maintenance Quality Inspector

B2 Licensed Engineer

Aircraft Mechanic III/Flight Engineer

Electro-Mechanical Avionics Technician Level 2

Location:
United Kingdom , Coningsby

Category:
IT - Administration

Contract Type:
Not provided

Job Posted:
January 15, 2026