Automation Engineer Job at ResMed (Johor Bahru)

Electrical Engineer – Process Automation and Electrical Engineering

Electrical engineer is responsible for activities related to its discipline with...

Location

Italy , Milan

Salary:

Not provided

EUROTECNICA Contractors and Engineers S.p.A.

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in electrical engineering
Minimum +2/3 years of work experience in engineering design in Oil & Gas or Power sectors is preferred
Proactivity, sense of initiative, ability to work independently and in a team
Fluent in Italian and English (written and spoken)
Availability to short and long term national and international business trips

Job Responsibility

Develop the discipline deliverables such as: Single Line Diagrams
Load schedule/ Plant load balance
Network studies and calculations (Load flow, short circuit, stability, protection settings, harmonics, etc.)
Electrical equipment specifications for MV and LV equipment such as Motor Control Centers, switchgears, metering panels, transformers, UPSes, VFDs, motors, heaters, etc.
Earthing, lighting, tracing systems
CCTV, Public Address systems
Electrical cables routing, power distribution
Electrical layout drawings
Field installation details
Field equipment and accessories MTO

Fulltime

Instrumentation Engineer – Process Automation and Electrical Engineering

Instrumentation engineer is responsible for activities related to its discipline...

Location

Italy , Milan

Salary:

Not provided

EUROTECNICA Contractors and Engineers S.p.A.

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Automation/Electrical engineering or Bachelor’s Degree in Chemical engineering
Minimum +2/3 years of work experience in engineering design in Oil & Gas or Power sectors is preferred
Proactivity, sense of initiative, ability to work independently and in a team
Fluent in Italian and English (written and spoken)
Availability to short and long term national and international business trips

Job Responsibility

Develop the discipline deliverables such as: Technical specifications / data sheets for field and control room instrumentation
Sizing and calculation of flow elements, control, and safety valves
Process hook-up sketches and relevant bill of materials
Interconnecting and wiring diagrams
Instrumentation cabling, wiring, junction boxes, power supply and distribution, UPS, and associated TCP/IP, SCADA, Modbus networking (switches, routers, Ethernet, fiber optics, etc.)
Cause & effect matrices
Interlock and control logic diagrams
Interlock and control narratives
Distributed Control Systems (DCS)
Safety Instrumented Systems (SIS)

Fulltime

Automation Engineer

Develop, update, and implement process documents for various equipment and proce...

Location

United States , St. Louis

Salary:

Not provided

Sovereign Technologies

Expiration Date

Until further notice

Requirements

Masters in Mechanical Engineering, Industrial Engineering, Electrical Engineering, or related
1 year experience

Job Responsibility

Develop, update, and implement process documents for various equipment and processes
Develop applications for manufacturing processes to make plant operations more efficient
Responsible for daily troubleshooting and resolving automation-related issues and repair of automation equipment to minimize downtime and ensure consistent production
Work with design engineering, advanced manufacturing, and quality engineers to develop and implement robust automation solutions
Collaborate with other engineers to improve horizontal project expansion
Conduct regular system upgrades and updates to ensure compatibility with evolving production needs and industry standards
Implement preventive maintenance routines for automation equipment, enhancing reliability and reducing unexpected breakdowns
Responsible for new equipment installation project management and 3rd party vendor management
Provide updates and status reports
Maintain documentation of system configurations, schematics, and troubleshooting procedures

Fulltime

Apu Process Engineer - Automation

The APU Process Engineer position is responsible for maximizing effectiveness by...

Location

United States , Buffalo Grove, Illinois

Salary:

80000.00 - 120000.00 USD / Year

Nemera

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Engineering preferred
5+ years of experience, preffered experience in Manufacturing with vision systems, assembly automation equipment
Experience with Plastic Injection Molding and high speed automation equipment preferred
Strong math, reading, and communication skills required
Computer skills, including Microsoft Office applications required
Ability to lift 50 lbs, and stand/walk up to 90% of shift
Able to bend, stoop, reach, push, pull, grab and climb as needed

Job Responsibility

Develops competencies of the production unit through internal and external training and development as needed
Define and update standard operating procedures (SOP) for production employees
Assess and trains setters
Reports outcomes to the APU Shift leader
Support APU Shift leader and managers in analyzing shop floor issues and point of escalation
Propose technical solutions to improve production processes and identifies opportunities to reduce cost, lead-time, and inventory
Analyze equipment’s performance indicators, define and facilitate corrective actions implementation (e.g.: CAPA)
Know, apply, and facilitate implementation of rules defined as part of Continuous Improvement of the plant and its team (5S, TPM, SMED, VSM, etc)
Facilitate workgroups linked to continuous improvement and propose action plans
Accountable of APU equipment’s improvement

Fulltime

Electrical Automation Engineer

The primary focus of this position will be building/improving electrical control...

Location

United States , San Jose

Salary:

123200.00 - 154000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Degree in Mechanical Engineering, Electrical Engineering, Mechatronics Engineering, Computer Science or similar with 2-5+ years of experience
Hands-on experience as a Electrical Engineer, Controls Engineer, Applications Engineer or Equipment Engineer working on automation and/or electromechanical systems
Knowledge of Electrical Standards (NFPA79, NEC, UL508A)
Knowledge of Safety Standards (ANSI/RIA15.06, OSHA)
Proficiency in developing pneumatic and electrical schematics in E-Plan/AutoCAD Electrical, to design electrical control panels, power distribution, controls system cabling/wiring and instrumentation.
Demonstrated understanding of industrial communication protocols
Experience programming cyclic execution devices such PLCs (Allen-Bradley/Siemens/Beckhoff)
Experience programming per ISA-88 standard
Experience programming cartesian, SCARA, articulated robots (Fanuc/Kuka/ABB)
Experience programming vision systems (iRVision/Cognex/Keyence)

Job Responsibility

Assist in the development of a high-volume production system, from early process feasibility studies to production at a greenfield site
Assist in development of Equipment Development Standards and templates to drive hardware/software standardization across factory
Work with external integrators to deliver equipment that meets company standards
Design power distribution, control panel to meet NFPA79, IEC 60204-1 UL 508A standards.
Design functional safety circuit to meet ISO 13849-1.
Provide machine design feedback from an electrical/controls and machine/operator safety perspective and drive implementation with cross-functional teams to ensure adherence to regulatory standards, Archer standards, equipment specification, and pass field labeling.
Support installation, commissioning, and qualification of new equipment and tooling with integrators
Develop, deploy and validate MES interface to equipment
Build from scratch as well as improve HMIs on ignition V8 perspective
Support in-line troubleshooting in electrical systems, control panel, field electrical device, and safety interlock circuit issues.

Fulltime

Automation Engineer

Responsible for designing, implementing, and optimizing automated systems and pr...

Location

Puerto Rico , Aguadilla

Salary:

Not provided

Hewlett Packard Enterprise

Expiration Date

Until further notice

Requirements

Bachelor's or Master's degree in Mechanical or Electrical Engineering
Typically 4-6 years experience
Understanding of automation components such as sensors, actuators, and control systems
Experience in manufacturing or automation projects
Exposure to robotics, PLCs, or industrial automation platforms
Using ProEngineer or other 3D CAD software as a mechanical design tool
Strong analytical and problem solving skills
Strong understanding and experience in electronics packaging
Designing sheet metal and plastic parts and associated production tooling and processes
Using CFD and thermal mockups to validate thermal solution

Job Responsibility

Designing, implementing, and optimizing automated systems and processes within manufacturing operations
Supporting the design and implementation of automated systems and components
Contributing to troubleshooting and optimization of automation systems
Designing engineering solutions for mechanical and thermal hardware, electronics enclosures, and production tooling
Developing and implementing parameters and test plans for new and existing designs
Collaborating and communicating with management, internal, and outsourced development partners regarding design status, project progress, and issue resolution
Leading a project team of other mechanical hardware engineers and internal and outsourced development partners
Providing guidance and mentoring to less-experienced staff members

What we offer

Health & Wellbeing benefits
Personal & Professional Development programs
Unconditional Inclusion environment

Fulltime

Automation Engineer

As an Automation Engineer in Manufacturing, you will design, deploy, and scale a...

Location

United States , Hayward

Salary:

135000.00 - 165000.00 USD / Year

1X Technologies

Expiration Date

Until further notice

Requirements

4+ years of experience in designing, deploying, and maintaining production automation equipment and robotic systems
Strong background in mechanical, electrical, or controls engineering principles relevant to automation hardware
Proficiency with PLCs, vision systems, sensors, actuators, and integration of automation components
Ability to develop and refine work instructions, process sequences, and ensure high reliability and throughput
Strong troubleshooting skills and experience with root cause analysis of hardware and system failures
Capability to drive process and hardware improvements to scale production capacity
Experience with documentation of automation systems: schematics, layouts, operating procedures, and maintenance schedules
Experience supporting new product introductions with automation‑focused strategies

Job Responsibility

Design, implement, and maintain production automation equipment and robotic cells for assembly, joining, fastening, dispensing, testing, and packaging processes
Apply mechanical, electrical, and controls engineering principles to develop automation solutions that reduce cycle time, improve quality, and enhance safety
Collaborate with manufacturing, design, and controls teams to integrate sensors, actuators, PLCs, and vision systems into automated systems
Develop and refine process automation sequences and work instructions to ensure high reliability and throughput
Troubleshoot, debug, and optimize automation equipment, including performing root cause analyses of failures
Drive continuous improvement of automation hardware, tooling, and processes to scale production capacity
Create and maintain detailed documentation including schematics, layouts, code, operating procedures, and maintenance schedules
Support new product introduction by developing scalable automation strategies for new robot designs

What we offer

Health, dental, and vision insurance
401(k) with company match
Paid time off and holidays

Fulltime

Automation Engineer

At Baxter, Automation Engineers play a critical role in achieving the mission to...

Location

Belgium , Lessines

Salary:

Not provided

Baxter

Expiration Date

Until further notice

Requirements

You are an industrial Engineer or Bachelor in automation/industrial computing
You have 5 to 10 years of experience in a similar role
You are comfortable in French and have a good level in English
You master the Office Suite, have good knowledge of programming Siemens S7 and Allen Bradley industrial automation systems
You have good technical knowledge in pneumatics, hydraulics, electricity and mechanics
Team spirit
Analytical capacity
Proactivity, taking initiatives
Respectful of rules and procedures
Rigorous, organizational and planning skills

Job Responsibility

Intervene rapidly in the event of breakdowns (PLC diagnostics, drives, etc.), thereby minimizing downtime
Troubleshoot and maintain supervision systems
Support production/maintenance technicians (+ on-call role outside office hours)
Validate machines to ensure production quality
Monitoring of production systems and processes
Ensure continuous process improvement
Manage/participate in the follow-up and implementation of new projects
Help prepare and monitor the investment plan
Technically approve modifications to departments' critical systems within the scope of the plan
Study, think and innovate to improve process efficiency

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Health & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer

Fulltime

Automation Engineer

ResMed

Location:
Malaysia , Johor Bahru

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
February 20, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Automation Engineer

Electrical Engineer – Process Automation and Electrical Engineering

Instrumentation Engineer – Process Automation and Electrical Engineering

Automation Engineer

Apu Process Engineer - Automation

Electrical Automation Engineer

Automation Engineer

Automation Engineer

Automation Engineer

Automation Engineer

ResMed

Location:Malaysia , Johor Bahru

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:February 20, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Automation Engineer

Electrical Engineer – Process Automation and Electrical Engineering

Instrumentation Engineer – Process Automation and Electrical Engineering

Automation Engineer

Apu Process Engineer - Automation

Electrical Automation Engineer

Automation Engineer

Automation Engineer

Automation Engineer

Location:
Malaysia , Johor Bahru

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
February 20, 2026