Automation Controls Engineer Job at Archer Aviation (San Jose)

Senior Controls & Automation Engineer

The Senior Controls & Automation Engineer is responsible for serving as a techni...

Location

United States of America , Pensacola

Salary:

Not provided

Danaher Corporation

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, Automation, Controls, or a related technical discipline
Minimum 10 years of progressive experience designing, implementing, and supporting industrial automation and control systems in manufacturing environments
Advanced hands‑on expertise with PLC platforms (Allen‑Bradley / Rockwell Automation preferred) and industrial control system architectures
Extensive experience with HMI and SCADA systems, including platforms such as FactoryTalk View, Ignition, and/or FactoryTalk Optix, as well as industrial communication protocols
Strong capabilities in electrical design review and advanced troubleshooting across controls, networks, motion systems, and safety‑related automation
Ability to travel – 20% travel, within US and International

Job Responsibility

Lead the architecture, design, programming, and optimization of PLC, HMI, and SCADA systems for automated manufacturing equipment and production lines
Define, govern, and support OT systems and control networks, including secure integration with enterprise IT, industrial communications, and data infrastructure
Provide technical leadership for installation, commissioning, validation, startup, and lifecycle support of new and upgraded automation systems
Serve as the senior escalation authority for complex troubleshooting across controls, industrial networks, process automation, and production data flows
Drive continuous improvement through automation, analytics, and standardization, while mentoring engineers and ensuring compliance with safety and industrial standards

What we offer

health care program
paid time off

Fulltime

Automation & Controls Engineer

The Automation and Digital Engineer is responsible for projects to automate and ...

Location

United States , Fajardo

Salary:

Not provided

Danaher Corporation

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in relevant science or engineering discipline e.g. Electrical Engineering, Computer Science, Computer Engineering
Substantial experience in relevant engineering roles, i.e. automation and control, and in manufacturing plants. Must be capable of understanding manufacturing and equipment specifications e.g. drawings and schematics
Practical “hands-on” expertise in design, build and test of industrial automation systems. Experience with instrumentation, local controllers, and supervisory control systems is essential and, ideally, with Rockwell Automation products. Familiarity with industrial network design and implementation would be a distinct advantage
Knowledge of how electrical safety circuits in an industrial environment work and how to implement proper safety controls that mitigate the risk identified
Capable of coordinating your own work plus that of others, including contracted third parties, via visual and daily management
Procedures associated with the management of change in a regulated industry and, specifically, commissioning, qualification and validation
Development and implementation of automated batch process control, including recipe management. Knowledge of ISA-88 would be advantageous

Job Responsibility

Use insights from Gemba to identify valuable problems to solve and build cases for automation and digitalization of our manufacturing equipment
Research alternative technologies to establish state-of-the-art, then design, build and test solutions, working with third-party vendors and contractors as required
Commission, qualify and validate new manufacturing technologies, managing these changes according to safety, quality and regulatory standards
Support troubleshooting of existing equipment, identify opportunities for continuous improvements, and implement technology upgrades
Participate in activities to define and deploy global specifications for automation and digitalization in our manufacturing plants

What we offer

health care program
paid time off

Fulltime

Automation & Controls Engineer

This role exists to manage the end-to-end delivery of site capital projects focu...

Location

United States , Independence

Salary:

71400.00 - 107200.00 USD / Year

Unilever

Expiration Date

Until further notice

Requirements

BS in an Engineering Field
Software / PLC programming knowledge, Process and packaging electrical hardware knowledge
1+ Years of Controls Engineering in FMCG / related Industry or gained in an engineering consultancy environment
Project Management experience with electrical / controls and automation systems.

Job Responsibility

Lead all electrical engineering and controls/automation capital projects at the site, ensuring compliance with Unilever corporate standards
Serve as the site expert for electrical and automation systems, providing technical guidance on SCADA, PLC, HMI, DCS, variable speed drives, and servo-motion control to maximize plant efficiency and reliability
Manage software modifications and optimization of control programs
maintain accurate documentation and version control for all systems
Drive development and execution of the plant masterplan for electrical systems and controls/automation in alignment with Unilever global design standards
Provide technical input to category engineering teams for innovation and renovation projects, supporting new product introductions and re-stages
Collaborate with cross-functional teams, including manufacturing, Maintenance, engineering, and union workforce, to deliver improvement initiatives and resolve complex technical issues
Support root cause analysis and corrective actions for electrical, instrumentation, and control system failures to enhance reliability
Champion value engineering and continuous improvement initiatives, introducing new ways of working to reduce installed cost while upholding Unilever’s core values
Deliver assigned capital projects On Time In Full (OTIF), managing budgets typically ranging from €0.05M to €2M, with safety as the top priority.

What we offer

Health insurance (including prescription drug, dental, and vision coverage)
Retirement savings benefits
Life insurance and disability benefits
Parental leave
Sick leave
Paid vacation and holidays
Access to numerous voluntary benefits
Bonus eligible
Long-Term Incentive (LTI) eligible

Fulltime

Sr Staff Automation & Controls Engineer

The Sr Staff Automation & Controls Engineer will be at the forefront of designin...

Location

United States , Secaucus

Salary:

116250.00 - 155000.00 USD / Year

Sanmina

Expiration Date

Until further notice

Requirements

Bachelors degree in Engineering, Computer Science, Data Science, or a related field
8+ years of experience in high-volume, high-complexity manufacturing
Demonstrated expertise in statistical and analytical methods such as regression analysis, correlation analysis, DOE, SPC, PFMEA, Gauge R&R, and commonality studies
Proficiency with data-driven tools such as Minitab, JMP, Python, R, SQL (or equivalent) to analyze and interpret large, complex datasets
Track record of driving measurable improvements in yield, reliability, or process robustness
Excellent communication skills with the ability to engage at both executive and technical levels
Background in electronics assembly, PCBA, servers, or other high-reliability industries (e.g., aerospace, medical devices, automotive, etc.)
Experience coaching or mentoring technical teams to upskill in data-driven decision-making
Proficiency in CAD tools (SolidWorks, AutoCAD) and industrial automation platforms (Siemens, Allen-Bradley, etc.)
Experience with PLC programming, robotic integration (e.g., 6-axis arms, gantry systems), and industrial sensors

Job Responsibility

Contribute to transformation initiatives, helping set new standards for how ZT approaches manufacturing risk analysis, quality, and continuous improvement
Define and implement new systems, processes, or frameworks that support the smart factory vision, including automation, metrology, advanced inspection and testing, and predictive analytics
Support NPI (New Product Introduction) by developing scalable automation strategies aligned with product roadmaps
Design and implement automated assembly and test equipment for server components, including PCBs, power modules, and cooling systems
Collaborate with cross-functional teams to ensure Design for Manufacturability (DFM) and Design for Automation (DFA) Principals are embedded in new product designs
Translate DFM and PFMEA outputs into actionable process controls, ensuring proactive prevention of variation rather than reactive correction
Develop and optimize mechatronic systems integrating robotics, sensors, actuators, PLCs, vision systems, motion control and software
Leverage deep, data-rich environments and tools to generate insights and drive continuous improvement initiatives focused on yield, reliability, cycle time, and throughput
Work with equipment vendors to specify, validate, and install automation solutions for medium to high-volume production
Apply manufacturing techniques such as precision fastening, soldering, adhesive bonding, and vision-based inspection

What we offer

Competitive base salary
Performance-based annual bonus eligibility
401(k) retirement savings plan
Tuition reimbursement for eligible education programs
Comprehensive medical, dental, and vision coverage with access to leading providers
Mental health resources and employee wellness support programs
Company-paid life and disability insurance
Paid time off (PTO) and company-paid holidays
Parental leave and family care support programs
Structured training programs and on-the-job learning opportunities

Fulltime

Controls & Automation Engineer

As a Controls & Automation Engineer at ISAR, you will be deeply involved in buil...

Location

Germany , Ottobrunn

Salary:

Not provided

Isar Aerospace

Expiration Date

Until further notice

Requirements

A degree in electrical engineering, automation technology, or the like/ A certified engineer (German: ‘staatlich geprüfter Techniker’) in automation technology
2+ years of experience in automation and PLC technology, ideally using Beckhoff PLCs
Experience in the field of PLC programming (soft-PLC) and commissioning, ideally using Beckhoff TwinCAT 3 or CODESYS based systems
Hands-on experience in giving technical support and troubleshooting in the field or remotely
Knowledge about industrial fieldbus systems
Basic understanding of electrical schematics
Highly organized and proactive with high attention to detail
Can-do attitude and outstanding communication skills
Fluent in English

Job Responsibility

Develop PLC software for new and existing ground systems
Design PLC hardware setups and topologies
Perform risk analyses and design safety-critical electrical systems
Commission control systems of new ground systems and tweak to operator’s needs
Maintain and support ground systems in all phases of their lifecycle
Troubleshoot PLC systems

What we offer

Employee Participation Program: Share in our success through our virtual company share program
30 days of vacation
Company pension plan: Secure your future with our company pension plan, featuring a 20% employer contribution after the probation period
Subsidised lunch: Stay energised with delicious, subsidised lunches every day
Public transport ticket: Commute with ease using a fully financed Deutschlandticket
Sport Clubs membership: Stay fit with our sponsored sports club memberships (EGYM Wellpass)
Individual learning allowance: Grow your skills with an individual learning budget granted after the probation period
Childcare allowance: Receive a childcare allowance for your non-school-age children

Fulltime

Controls & Automation Engineer

As a Controls & Automation Engineer at ISAR, you will be deeply involved in buil...

Location

Germany , Ottobrunn

Salary:

Not provided

Isar Aerospace

Expiration Date

Until further notice

Requirements

A degree in electrical engineering, automation technology, or the like/ A certified engineer (German: ‘staatlich geprüfter Techniker’) in automation technology
2+ years of experience in automation and PLC technology, ideally using Beckhoff PLCs
Experience in the field of PLC programming (soft-PLC) and commissioning, ideally using Beckhoff TwinCAT 3 or CODESYS based systems
Hands-on experience in giving technical support and troubleshooting in the field or remotely
Knowledge about industrial fieldbus systems
Basic understanding of electrical schematics
Highly organized and proactive with high attention to detail
Can-do attitude and outstanding communication skills
Fluent in English

Job Responsibility

Develop PLC software for new and existing ground systems
Design PLC hardware setups and topologies
Perform risk analyses and design safety-critical electrical systems
Commission control systems of new ground systems and tweak to operator’s needs
Maintain and support ground systems in all phases of their lifecycle
Troubleshoot PLC systems

What we offer

Employee Participation Program: Share in our success through our virtual company share program
30 days of vacation
Company pension plan: Secure your future with our company pension plan, featuring a 20% employer contribution after the probation period
Subsidised lunch: Stay energised with delicious, subsidised lunches every day
Public transport ticket: Commute with ease using a fully financed Deutschlandticket
Sport Clubs membership: Stay fit with our sponsored sports club memberships (EGYM Wellpass)
Individual learning allowance: Grow your skills with an individual learning budget granted after the probation period
Childcare allowance: Receive a childcare allowance for your non-school-age children

Sr Engineer, Automation Controls

Being an Engineer at Baxter means you play a critical role in helping us achieve...

Location

United States , Round Lake

Salary:

88000.00 - 121000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

BS in Electrical Engineering or related engineering discipline with 3 or more years relevant work experience
Experience directly working in or actively supporting a dynamic manufacturing operation is preferred
Knowledge of the basic principles in various engineering disciplines
Must know how to effectively run projects and direct the activities of a technician
Knowledge of manufacturing equipment electrical and pneumatic systems
Experience with electrical control system design and relevant CAD software, preferably Solidworks Electrical
Must have experience with electrical and control system design of manufacturing equipment with the following systems: Rockwell Automation Software (including RSLogix5000/Studio 5000) and HMI Systems (FactoryTalk View Studio ME/SE)
Ability to communicate and persuade customers, partners, and management on recommended courses of action with minimal assistance using both written and verbal methods
Effectively operate in and may facilitate cross-functional teams with guidance
Must be able to provide solutions that reflect understanding business objectives and cost implications

Job Responsibility

Responsible for PLC and HMI programming for manufacturing equipment designed and constructed internally by Baxter Engineering, as well as controls-related support for various equipment in Baxter’s global manufacturing network
Displays standard engineering principles to resolve difficult problems, from conception to final design with team input
Plans, schedules and leads project assignments in the evaluation, selection and adaptation of various engineering techniques, procedures and criteria with minimal guidance
With minimal guidance, schedules and leads a team through the planning and execution of a smaller project or defined piece of a larger project. This includes constructing detailed, accurate project schedules, interfacing with development groups and technical support groups
Act independently with minimal supervision in developing large scale PLC programs, HMI Systems, vision systems, and servo systems
Able to interface with design, engineering, technicians, plant personnel, and external vendors to assure successful design, fabrication and assembly of manufacturing equipment
Able to contribute to cost estimating of the control engineering portion of major capital budget items, track project budgets, monitor and contribute to the spending of approved project funds
Ability to prioritize multiple tasks across multiple projects
Continuously improve department processes and advance standardization related to controls technology and programming
Investigate and analyze field issues and develop/evaluate/implement design improvements

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer
medical and dental coverage that start on day one
insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount
401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching
Flexible Spending Accounts

Fulltime

Sr Engineer, Automation Controls

Being an Engineer at Baxter means you play a critical role in helping us achieve...

Location

United States , Round Lake

Salary:

88000.00 - 121000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

BS in Electrical Engineering or related engineering discipline with 3 or more years relevant work experience
Experience directly working in or actively supporting a dynamic manufacturing operation is preferred
Knowledge of the basic principles in various engineering disciplines
Must know how to effectively run projects and direct the activities of a technician
Knowledge of manufacturing equipment electrical and pneumatic systems
Experience with electrical control system design and relevant CAD software, preferably Solidworks Electrical
Must have experience with electrical and control system design of manufacturing equipment with the following systems: Rockwell Automation Software (including RSLogix5000/Studio 5000) and HMI Systems (FactoryTalk View Studio ME/SE)
Ability to communicate and persuade customers, partners, and management on recommended courses of action with minimal assistance using both written and verbal methods
Effectively operate in and may facilitate cross-functional teams with guidance
Must be able to provide solutions that reflect understanding business objectives and cost implications

Job Responsibility

Responsible for PLC and HMI programming for manufacturing equipment designed and constructed internally by Baxter Engineering, as well as controls-related support for various equipment in Baxter’s global manufacturing network
Displays standard engineering principles to resolve difficult problems, from conception to final design with team input
Plans, schedules and leads project assignments in the evaluation, selection and adaptation of various engineering techniques, procedures and criteria with minimal guidance
With minimal guidance, schedules and leads a team through the planning and execution of a smaller project or defined piece of a larger project
Act independently with minimal supervision in developing large scale PLC programs, HMI Systems, vision systems, and servo systems
Able to interface with design, engineering, technicians, plant personnel, and external vendors to assure successful design, fabrication and assembly of manufacturing equipment
Able to contribute to cost estimating of the control engineering portion of major capital budget items, track project budgets, monitor and contribute to the spending of approved project funds
Ability to prioritize multiple tasks across multiple projects
Continuously improve department processes and advance standardization related to controls technology and programming
Investigate and analyze field issues and develop/evaluate/implement design improvements

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer
medical and dental coverage that start on day one
insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP)
401(k) Retirement Savings Plan (RSP)
Flexible Spending Accounts

Fulltime

Select Country

Automation Controls Engineer

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?

Automation Controls Engineer

Senior Controls & Automation Engineer

Automation & Controls Engineer

Automation & Controls Engineer

Sr Staff Automation & Controls Engineer

Controls & Automation Engineer

Controls & Automation Engineer

Sr Engineer, Automation Controls

Sr Engineer, Automation Controls

Our AI answers in your language