CrawlJobs Logo

Associate Technician

opsm.com.au Logo

OPSM

Location Icon

Location:
United States , Minot

Category Icon
Category:
Manufacturing

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

The Associate Technician is responsible for the set-up, operation, and basic maintenance of equipment within the assigned area for work task/job in surface or finish portions of lab production.

Job Responsibility:

  • Perform various tasks of area production machine functions
  • Interpretation of Rx work ticket
  • Perform production operations on specified equipment in accordance with established procedures
  • Perform basic/routine maintenance of assigned equipment
  • Ability to troubleshoot mal-functioning equipment and advise supervisor as to possible remedy
  • Lens wash
  • Tool selection/replacement
  • Equipment set up for daily production
  • Equipment clean up at day's end
  • Prepare all necessary solutions or slurry mixtures for lens production process (when applicable) and insure sufficient supplies are available
  • Perform daily and weekly calibration of equipment as directed by area supervisor and in accordance with established divisional operation procedures
  • Effectively communicate with all levels of the laboratory to assure understanding and the proper application of company policies, practices and procedure
  • Maintain work area and common areas of department in a neat, clean, and organized condition
  • Understand and follows all company and laboratory policies and procedures and ensure compliance with all attendance & safety rules and regulations
  • Maintain confidentiality of all proprietary information
  • Willingly assist others as necessary to keep work current, meet deadlines or maintain an even workload
  • Cooperate with other employees and demonstrate a good attitude
  • Perform an acceptable quantity and quality of work on time as required
  • Provide proper training, work direction, and technical guidance for less experienced employees
  • Attend in-house or sponsored training meetings when necessary
  • Perform other duties as assigned

Requirements:

  • High school diploma, GED or equivalent work experience
  • Ability to multi-task, orientation to detail and ability to operate in a fast-paced environment
  • Basic high school level math skills required
  • Ability to lift/move up to 50 pounds
What we offer:
  • health care
  • retirement savings
  • paid time off/vacation
  • various employee discounts

Additional Information:

Job Posted:
May 04, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
OPSM - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Associate Technician

Contract Associate Accounts Technician

Support seamless finance operations-join us as an Associate Accounts Technician ...
Location
Location
United Kingdom , London
Salary
Salary:
Not provided
proclinical.com Logo
Proclinical
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • AAT qualified or part-qualified in CIMA, ACCA, ACA, or equivalent (desirable)
  • Strong understanding of double-entry bookkeeping
  • Advanced Excel skills with the ability to analyze large datasets efficiently and accurately
  • Extensive experience working with Xero accounting software
  • Excellent written and verbal communication skills
  • Ability to work under pressure and meet deadlines
  • Strong analytical skills and attention to detail
  • Effective organizational skills with the ability to prioritize workload
Job Responsibility
Job Responsibility
  • Manage key month-end processes, including balance sheet reconciliations, accounts payable postings, and drafting sales invoices
  • Gather and organize information for audit queries
  • Assist with UK compliance tasks
  • Fulltime
Read More
Arrow Right

Research Associate - Certified Phlebotomy Technician

Parexel Early Phase Clinical Unit supports the development of innovative new med...
Location
Location
United States , Glendale
Salary
Salary:
20.00 - 26.00 USD / Hour
parexel.com Logo
Parexel
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Active CPT License in the state of CA is required
  • Customer service experience in a fast-paced environment
  • Experience working in a medical or clinical setting is highly preferred
  • Comfortable standing and walking for a prolonged period of time
  • B.S.+ in related life science field OR HS diploma/GED with relevant experience
Job Responsibility
Job Responsibility
  • Understand study protocols and be able to complete required medical procedures
  • Recruit study participants by calling the database, attending company sponsored community events, posting flyers
  • Enter study participants in the study participant tracking system and study logs, maintain appointment calendars, and operate company information systems and computer programs
  • Conduct screening visits and study protocol specific study participant visits, assist staff physicians in assessment of concomitant medications, adverse events, lab results, and other test results
  • Prepare/monitor study supplies and stock levels in clinic/hospital
  • Label, inventory, and send plasma samples
  • Problem solves study participant issues as they arise
  • Ensure basic study participant safety is provided
  • Assist with Monitor visits (i.e., room set up, etc.)
  • Identify issues that need Sponsor approval and bring these to the attention of the CRC
What we offer
What we offer
  • Extensive induction program and ongoing training
  • Opportunity for career growth and advancement internally
  • Eligible for shift differentials
  • Eligible for participation in annual performance-based bonus plan
  • Annual salary review
  • Additional total rewards incentives
  • Paid time off
  • 401k match
  • Life insurance
  • Health insurance
  • Fulltime
Read More
Arrow Right

Biological technician

Biological technicians contribute their own set of skills to the scientific proc...
Location
Location
United States , NC Triangle Area
Salary
Salary:
34139.00 USD / Year
durhamtech.edu Logo
Durham Technical Community College
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associate in Science degree or Biotechnology Associate in Applied Science degree
  • Coursework covering biology, chemistry, engineering, geology, math, and physics
Job Responsibility
Job Responsibility
  • Assist biological and medical scientists
  • Set up, operate, and maintain lab instruments and equipment
  • Make observations
  • Monitor lab work
  • Examine specimens to detect the presence of disease
Read More
Arrow Right

Automation & Controls Technician

As an Automation & Controls Technician at West Fraser, you will play a key role ...
Location
Location
United States , Greenville
Salary
Salary:
Not provided
westfraser.com Logo
West Fraser
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associate’s degree, equivalent, or greater in Mechatronics, Industrial Electrical, Engineering Technology OR equivalent prior experience as a Technician with good programming/technical skills and prior OSB experience
  • Highly collaborative, technology savvy (proficiency in use of collaboration tools), and willing to learn
  • Proficient in programming and troubleshooting of Programmable Logic Controllers (preferably Rockwell ControlLogix)
  • Ability to visualize physical processes to remotely assist field personnel in set up and troubleshooting
  • Excellent verbal and written communication skills including ability to interpret and disseminate technical info to a wide range of skill sets and support roles
  • Ability to work in shifts and variable schedules to support a 24/7 manufacturing schedule
  • Ability to work well as a team and independently
  • Traveling 20% of less to mill locations
Job Responsibility
Job Responsibility
  • Remotely monitoring the status of critical devices including electrical and mechanical components, circuitry, controls, robotics and other manufacturing machinery and assist in service, repair, and calibration of these devices for multiple OSB and lumber mills
  • Analyzing and identifying causes of system issues and assist in breakdown recovery
  • Assisting in set-up of new and replacement equipment
  • Providing programming support for day-to-day process changes
  • Troubleshooting as needed in coordination with onsite technicians
  • Answering and logging system issues or requests for assistance from automated system monitors or mill manufacturing staff
  • Assisting in upgrading facilities to conform to enhanced automation and digitization standards including providing onsite support of infrastructure installation and commissioning
  • Implementing and maintaining West Fraser Analytics System (NAS), Manufacturing Execution Systems (MES), Model Predictive Control (MPC), and Rockwell ECO System across all facilities
  • Developing PLC programs and HMIs in accordance with West Fraser standards and capital expense guidelines
  • Providing data and support of mill level project analysis and execution
What we offer
What we offer
  • Benefits starting Day 1
  • Competitive starting pay
  • On-the-job training
  • A culture that strongly believes in promoting from within
  • Medical
  • Dental
  • Vision
  • 401K with company match and additional retirement contribution
  • Employee Stock Purchase Plan
  • Life Insurance
  • Fulltime
Read More
Arrow Right

Manufacturing Engineering Technician

As a member of the Manufacturing Engineering team, the Engineering Technician wi...
Location
Location
United States , Manchester
Salary
Salary:
24.00 - 25.00 USD / Hour
csetalent.com Logo
Connexion Systems & Engineering, Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associates Degree in Engineering, Mechatronics or other technical field
  • 1+ years’ experience in technical, hands-on problem solving role in a highly regulated environment, medical preferred
  • Demonstrated, hands-on skills with electrical, mechanical, pneumatic or hardware troubleshooting
  • Knowledge and ability to read blueprints, drawings
  • Experience with Lean and/or structured problem solving tools
  • Demonstrated skills to provide basic data analysis and reporting
  • Demonstrated skills with MS Office applications
  • Superior verbal and written communication skills
  • Excellent interpersonal skills
  • Ability to manage multiple priorities daily
Job Responsibility
Job Responsibility
  • Provide direct technical support to the Production Operations and Manufacturing Engineering teams within daily business operations
  • Act as accountable technical team member for process yield performance for a limited production area
  • Provide hands-on technical support to operations for manufacturing issues directly within a clean-room environment
  • Support and facilitate productivity and throughput improvement projects to achieve target process run rates
  • Perform hands-on failure analysis and investigation to process nonconformities
  • Report-out to production line team on details of technical investigation through clear, thorough and specific documented feedback
  • Work with engineering team resources to develop and implement process improvement projects
  • Design, develop and fabricate simple manufacturing tools, fixtures and devices
  • Collaborate with vendors, suppliers and other company team members for engineering projects
  • Support the execution of change-management process elements including validation documentation, process work instructions, engineering studies and other technical writing
  • Fulltime
Read More
Arrow Right

Manufacturing Engineering Technician

As a member of the Manufacturing Engineering team, the Engineering Technician wi...
Location
Location
United States , Manchester
Salary
Salary:
24.00 - 25.00 USD / Hour
csetalent.com Logo
Connexion Systems & Engineering, Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associates Degree in Engineering, Mechatronics or other technical field
  • 1+ years’ experience in technical, hands-on problem solving role in a highly regulated environment, medical preferred
  • Demonstrated, hands-on skills with electrical, mechanical, pneumatic or hardware troubleshooting
  • Knowledge and ability to read blueprints, drawings
  • Experience with Lean and/or structured problem solving tools
  • Demonstrated skills to provide basic data analysis and reporting
  • Demonstrated skills with MS Office applications
  • Superior verbal and written communication skills
  • Excellent interpersonal skills
  • Ability to manage multiple priorities daily
Job Responsibility
Job Responsibility
  • Act as accountable technical team member for process yield performance for a limited production area
  • Provide hands-on technical support to operations for manufacturing issues directly within a clean-room environment
  • Support and facilitate productivity and throughput improvement projects to achieve target process run rates
  • Perform hands-on failure analysis and investigation to process nonconformities
  • Report-out to production line team on details of technical investigation through clear, thorough and specific documented feedback
  • Work with engineering team resources to develop and implement process improvement projects
  • Design, develop and fabricate simple manufacturing tools, fixtures and devices
  • Collaborate with vendors, suppliers and other company team members for engineering projects
  • Support the execution of change-management process elements including validation documentation, process work instructions, engineering studies and other technical writing
  • Fulltime
Read More
Arrow Right

Battery Cell Mechanical Test Technician

We’re ALTEN Technology USA, an engineering company helping clients bring groundb...
Location
Location
United States , Hayward
Salary
Salary:
65000.00 - 90000.00 USD / Year
altenusa.com Logo
ALTEN Technology USA
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associate degree or technical diploma in Mechanical Engineering Technology, Mechatronics, or equivalent hands-on experience
  • 5+ years of experience in a testing, fabrication, or lab environment
  • Familiarity with machining, 3D printing, and mechanical assembly techniques
  • Ability to read engineering drawings and follow detailed instructions
  • Proficiency in using standard measurement tools and lab instrumentation
  • Strong troubleshooting and problem-solving skills in a hands-on environment
Job Responsibility
Job Responsibility
  • Build and maintain test setups that replicate module- and pack-level loading conditions for cells
  • Apply lab-scale fabrication techniques, including machining, 3D printing, and adhesive bonding, to create fixtures and test hardware
  • Operate lab equipment such as chillers, pumps, and load frames to conduct controlled mechanical tests
  • Install and use sensors (temperature, pressure, displacement, force) to capture accurate test data
  • Support troubleshooting of test rigs, equipment calibration, and fixture maintenance
  • Work closely with engineers to refine test methods and ensure repeatable, reliable results
  • Maintain detailed records of test setups, conditions, and results to support engineering analysis
  • Follow strict safety procedures when working with high-voltage components and lab machinery
Read More
Arrow Right

Lab Technician

Build and test units and circuits required with assistance, document test and re...
Location
Location
United States , Highland
Salary
Salary:
24.00 - 26.00 USD / Hour
basler.com Logo
Basler Electric
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associate’s degree in Electronic Technology or equivalent
  • Basic computer knowledge of Microsoft Windows, Word, and Excel
  • Ability to occasionally lift/move 25 to 50 lb. weight materials
  • Ability to use hands for simple grasping and fine manipulation
  • Travel as required to provide on-site technical assistance, testing, etc., for a specific product or to perform testing at an external lab facility
Job Responsibility
Job Responsibility
  • Build test circuits or prototypes as specified by and assisted by the project engineer(s)
  • Develop test procedures and reports based on design specifications and/or other functional defining documentation
  • Conduct design verification and functional tests on various products and records data utilizing electronic documentation formats
  • Utilize problem tracker system to identify functional or test problems found
  • Assist in providing information for instruction manuals
  • Assist in training production technicians and others
  • Troubleshoot down to component level with assistance as needed
  • Provide assistance to Quality Engineering for failure analysis
  • Provide customer technical assistance on testing and/or unit setup
  • Assist in the evaluation of electronic components
What we offer
What we offer
  • Medical, Prescription, Dental, Vision, Life, and AD&D insurance
  • a 401k plan
  • paid leaves for Vacation, Holiday, Sick, Jury Duty, Bereavement
  • tuition reimbursement
  • Fulltime
Read More
Arrow Right