Associate Electrical Engineer – Transmission and Distribution Job at Olsson (Kansas City, MO)

Associate Operator, Distribution System

This position plans, coordinates, reviews switching and tagging; writing, checki...

Location

United States , Manchester

Salary:

94140.00 - 104600.00 USD / Year

EVERSOURCE

Expiration Date

Until further notice

Requirements

Associates degree in Engineering or related technical field or equivalent experience
Zero (0) to five (5) years of related electrical utility experience
Must successfully pass all required pre-employment assessments
Must be available to work emergency restoration assignment as required
Must be available to travel between MA/CT/NH as necessary
This position will require 24/7 shift rotation coverage
Working knowledge of all transmission and distribution network equipment and vehicles, work practices and procedures, construction and material standards, safety, regulatory and design codes
Demonstrated knowledge in training and development concepts, theories, practices and principals using a Systematic Approach to Training
Thorough knowledge of the switching and tagging procedures
Thorough knowledge of Electric Distribution System operations

Job Responsibility

Plans, coordinates, reviews switching and tagging
Writing, checking, and issuing clearances
Monitoring of loads, emergency restoration and associated reporting for the electric distribution system within an assigned region
Coordinates activities with ESCC and other regions when system conditions cross jurisdictional lines
Analyzes trouble calls (events) and initiates corrective action with the appropriate Area Work Center function including call-out of personnel in accordance with established procedures
Handles corrective action as required by timing or circumstances
Informs appropriate System Personnel of problems on the assigned region's electric distribution system and associated restoration progress
Monitors load and voltages on circuits and substation equipment during switching and peak periods to assure loading parameters are not exceeded
Assists with implementing the assigned region's emergency response plan as required
Assists at Area Work Center satellites and other regional operation centers during emergency storm restoration as assigned

What we offer

Competitive total rewards program
Potential incentive

Fulltime

Associate Operator, Distribution System

This position plans, coordinates, reviews switching and tagging; writing, checki...

Location

United States , Manchester

Salary:

91400.00 - 101550.00 USD / Year

EVERSOURCE

Expiration Date

Until further notice

Requirements

Associates degree in Engineering or related technical field or equivalent experience
Zero (0) to five (5) years of related electrical utility experience
Must successfully pass all required pre-employment assessments
Must be available to work emergency restoration assignment as required
Must be available to travel between MA/CT/NH as necessary
Requires a working knowledge of all transmission and distribution network equipment and vehicles, work practices and procedures, construction and material standards, as well as safety, regulatory and design codes
Requires a demonstrated knowledge in training and development concepts, theories, practices and principals using a Systematic Approach to Training
Ability to communicate and work effectively with various levels of the organization and others involved with Electric Operations
Ability to analyze electric distribution system problems and act accordingly
Thorough knowledge of the switching and tagging procedures

Job Responsibility

Plans, coordinates, reviews switching and tagging
writing, checking, and issuing clearances
monitoring of loads, emergency restoration and associated reporting for the electric distribution system within an assigned region
Coordinates the above activities with ESCC and other regions when system conditions cross jurisdictional lines
Analyzes trouble calls (events) and initiates corrective action with the appropriate Area Work Center function including call-out of personnel in accordance with established procedures
Handles corrective action as required by timing or circumstances, and informs appropriate System Personnel of problems on the assigned region's electric distribution system and associated restoration progress
Monitors load and voltages on circuits and substation equipment during switching and peak periods to assure loading parameters are not exceeded
Assists with implementing the assigned region's emergency response plan as required, and assists at Area Work Center satellites and other regional operation centers during emergency storm restoration as assigned
Maintains the electric model in the outage management system to reflect real-time system status
Efficiently coordinate emergency actions with other vested parties such as Federal, State, and Municipal partners along with other utilities

What we offer

Competitive total rewards program
Potential incentive

Fulltime

Electrical Design Manager

An experienced leader with excellent communication, negotiation, and interperson...

Location

United Kingdom , Colchester

Salary:

60000.00 GBP / Year

Hedera Hiring Ltd

Expiration Date

Until further notice

Requirements

Leading multiple project delivery teams, in relation to Primary Sub-stations, including 132kV Network Management Systems
High Voltage electrical design, maintenance on transmission & distribution networks.
HNC or higher - Electrical Engineering
CSCS Card
IOSH / NEBOSH
IEng / CEng in Electrical Engineering (or working towards)
Management, technical, industry, contract, program, policy, standards, system operations, commissioning and Health & Safety experience in power distribution, up-to 132kV

Job Responsibility

Managing the Electrical Design Team, Training Competence & ServicesTeam, Authorisation Process (NAF’s), and EMF Process
Developing the Design & Technical capability of the Electricity team up to 132kV by collaboratively developing training plans and associated systems.
Ensuring all Design & Technical reporting to regulatory bodies is adhered to
Maintaining & developing relationships with ICPs, DNO’s & other stakeholders
Assisting all Departmental Managers in developing greater efficiency within the Company to promote continuous improvement to Electrical Design & Technical procedures
Supporting the development, delivery, and management of the Safety and Technical Competencies system for engineering personnel
Encouraging the promotion of the City & Guilds Electricity training program & positively engaging with the STC Manager

Senior QC Engineer - Technical

Review all the projects specifications & engineering documents related to scope ...

Location

Egypt , Cairo

Salary:

Not provided

Giza Systems

Expiration Date

Until further notice

Requirements

In-depth knowledge of transmission and distribution systems, ELV systems (fire alarm, CCTV, ACS, BMS, audio visual, lighting control…), Data communication systems (active and passive), and associated components, standards, and codes
Proven experience as a QC Electrical Engineer or a similar role (+ 5 years)
Strong understanding of quality control methodologies and tools
Proficiency in conducting inspections, tests, and measurements on electrical systems and components
Familiarity with relevant software and tools used in electrical engineering and quality control
Bachelor’s degree in electrical engineering
Excellent problem-solving and analytical skills
Strong attention to detail and accuracy
Effective communication and interpersonal skills
Ability to work independently and collaborate effectively in a team environment

Job Responsibility

Review all the projects specifications & engineering documents related to scope of work including (Layouts, Shop Drawings, Wiring Diagrams, PID, Loop Drawing, Logic Diagram, Isometric Drawings, Installation standard,...etc.)
Participate in developing and implementing the quality control processes and procedures for various electrical systems like ITP, Check list, MoS,….. etc.
Inspect all the materials delivered to ensure that they completely match with the approved material as well as the project specifications
Perform on-site inspections and tests on transmission and distribution systems, ELV systems (fire alarm, CCTV, ACS, BMS, audio visual, lighting control…), Data communication systems (active and passive) and associated components to ensure compliance with industry standards and project specifications
Ensure that all quality control activities comply with relevant industry standards, regulatory requirements, and company policies
Identify and resolve quality findings and non-conformities through root cause analysis and corrective actions
Prepare detailed inspection reports, including findings, observations, and recommendations
Responsible for the QC documents of the complete project, including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QC documents
Assist project’ team in ensuring knowledge of all quality standards, compliance with all quality manuals and procedures, and collaborate with contractors and suppliers to maintain the quality of all systems
Perform on-site inspection on suppliers and subcontractors to ensure compliance with quality requirements

Lead Power Systems Engineer

As our new Power Systems Engineer, you’ll be a vital part of the team who are ch...

Location

Philippines , Manila

Salary:

Not provided

Aurecon Group

Expiration Date

Until further notice

Requirements

Adequate understanding of electrical engineering and power systems theory relating to electricity transmission, distribution and generation, and associated control and protection principles
A Bachelor's or Master of Electrical Engineering degree and a PhD degree will be favourable
Experience in power system modelling tools, particularly with PSCAD, PSS/E, and Power Factory
Site and practical experience in a relevant area
Experience in power system model development, coding, scripting and automation
Knowledge of the Australian National Electricity Rule and past experience with Australian grid connection projects
Power system analysis for utility-scale networks including steady state and dynamic system studies
Experienced working with DigSILENT PowerFactory, PSCAD, PSS/E, and the ability to guide and mentor younger team members
Thorough understanding of the generator connection process in Australia (Chapter 5 and 5A) and the obligations of each party (NSPs, AEMO, Proponent etc)
Knowledgeable in one or more generator technologies such as synchronous (steam, hydro, gas etc) or asynchronous (solar PV, wind, BESS etc)

Job Responsibility

Undertaking power systems studies, including grid-connection, network planning, system strength impact assessment and research and development
Developing wide-area network and individual equipment models in a range of simulation tools and in particular PSS®E and PSCAD/EMTDC
Preparing grid connection application documents and technical reports
Interfacing with a wide range of clients and other industry organisations
Developing technical solutions to complex network and connection issues

Fulltime

Engineer, Protection and Controls

P&C Engineer is responsible for completing activities and assignments with the d...

Location

United States , Westwood

Salary:

53.55 - 65.02 USD / Hour

EVERSOURCE

Expiration Date

Until further notice

Requirements

Must pass the minimum physical requirements as prescribed by Eversource
Must have corrective vision, normal color perception, hearing and a sense of smell
Must possess a valid driver’s license to operate motor vehicles
Must possess or be willing and able to obtain the appropriate drivers license and Eversource qualification to operate motor vehicles of any class and type required by the company based on departmental needs
Bachelor of Science degree in Electrical Engineering (BSEE) or Bachelor of Science degree in Electrical and Computer Engineering (BSECE)
Must evidence interest and aptitude necessary for successful progress in the engineering profession
Must possess personality traits such as alertness, self-reliance, poise, tact and the ability to maintain harmonious relations with their associates

Job Responsibility

Complete activities and assignments with the design and operation of protection and control systems necessary for the safe and reliable operation of the transmission and distribution system
Analyze protection system operations, and the appropriate resolutions, in order to provide support to operations on unplanned maintenance
Share accountability with peers in the planning, project management, substation engineering, operations, and maintenance organizations to carry out the efficient and timely completion of system reliability projects, generation interconnection projects and system restoration and troubleshooting efforts
Review and evaluate proposed changes to existing electric facilities to ensure compatibility with established Eversource protection system standards and practices
Create new Protection and Control system designs in accordance with Eversource Standards as required
Specify materials associated with new or modified Protection and Control systems for assigned projects
Develop, calculate, and document settings and logic for protective relays, logic processors, feeder reclosers, and switches necessary to support Eversource system reliability projects and initiatives
Perform coordination studies by modeling and analyzing electric system elements and their protection systems using fault simulation software
Analyze protection system operations during transmission and distribution system disturbances in support of Substation Technical Group Event analysis
Interface with Eversource Planning, Operations and Field personnel to support their efforts to plan, operate and maintain the transmission and distribution system

Fulltime

Engineer, Protection and Controls

P&C Engineer is responsible for completing activities and assignments with the d...

Location

United States , Westwood

Salary:

53.55 - 65.02 USD / Hour

EVERSOURCE

Expiration Date

Until further notice

Requirements

Must pass the minimum physical requirements as prescribed by Eversource
Must have corrective vision, normal color perception, hearing and a sense of smell
Must possess a valid driver’s license to operate motor vehicles
Must possess or be willing and able to obtain the appropriate drivers license and Eversource qualification to operate motor vehicles of any class and type required by the company based on departmental needs
Engineering education as evidenced by a Bachelor of Science degree in Electrical Engineering (BSEE) or Bachelor of Science degree in Electrical and Computer Engineering (BSECE)
Must evidence interest and aptitude necessary for successful progress in the engineering profession
Must possess personality traits such as alertness, self-reliance, poise, tact and the ability to maintain harmonious relations with their associates

Job Responsibility

Review and evaluate proposed changes to existing electric facilities to ensure compatibility with established Eversource protection system standards and practices
Create new Protection and Control system designs in accordance with Eversource Standards as required
Specify materials associated with new or modified Protection and Control systems for assigned projects
Develop, calculate, and document settings and logic for protective relays, logic processors, feeder reclosers, and switches necessary to support Eversource system reliability projects and initiatives
Perform coordination studies by modeling and analyzing electric system elements and their protection systems using fault simulation software
Analyze protection system operations during transmission and distribution system disturbances in support of Substation Technical Group Event analysis
Interface with Eversource Planning, Operations and Field personnel to support their efforts to plan, operate and maintain the transmission and distribution system
Manage and perform work activities with training, guidance and oversight from senior staff and management
Actively support storm and/or emergency restoration assignments
Effectively coordinate work activities with others

Fulltime

Manager, High Voltage & Medium Voltage O&M Engineering

The Manager of High Voltage & Medium Voltage Engineering leads Clearway’s MV/HV ...

Location

United States , San Diego

Salary:

140000.00 - 200000.00 USD / Year

Clearway Energy

Expiration Date

Until further notice

Requirements

Typically has a bachelor’s degree in electrical engineering or a related field with 2 to 6 years of experience
or an associate degree in electrical engineering or related field with 8-10 years of experience in transmission, distribution, substation, or plant operations
A minimum of five years managing people and leading complex projects
Must understand electrical power generation, distribution, and possess a thorough knowledge of MV and HV systems, including overhead, underground, and substation systems
Must possess a good understanding of operating procedures, environmental and safety rules, and regulations, and first aid procedures
Strong knowledge of electrical test equipment
Interpreting and following technical instructions furnished in verbal, written, diagrammatic, and schedule formats
Reading and interpreting electrical drawings, technical manuals, and test reports
Must be able to maintain professional and positive relationships with owners, customers, internal contractors, and external contractors
Must have the ability to perform fundamental training of O&M personnel

Job Responsibility

Provide support to O&M teams during MV/HV events and outages
Guide troubleshooting for faults, switching, and restoration
Lead the Field Services Engineering team in MV/HV systems, relays, and protection coordination
Lead event/fault analysis and technical investigations, including root cause analysis
Lead major maintenance cycle planning & scope, PRC‑005 compliance, and 6-year outage planning
Oversee component risk evaluations and end‑of‑life assessments
Oversee change management of substation equipment and design
Develop standards, procedures, documentation, and workflows
Support the development of competency and training for Plant personnel
Provide technical support, review, and approval for new vendor/contractor qualification

What we offer

generous PTO
medical, dental & vision care
HSAs with company contributions
health FSAs
dependent daycare FSAs
commuter benefits
relocation
a 401(k) plan with employer match
a variety of life & accident insurances
fertility programs

Fulltime

Associate Electrical Engineer – Transmission and Distribution

Olsson

Location:
United States , Kansas City, MO ▼
Lincoln, NE
North Kansas City, MO
Omaha, NE
Overland Park, KS

Category:
Energy

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
February 18, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Associate Electrical Engineer – Transmission and Distribution

Associate Operator, Distribution System

Associate Operator, Distribution System

Electrical Design Manager

Senior QC Engineer - Technical

Lead Power Systems Engineer

Engineer, Protection and Controls

Engineer, Protection and Controls

Manager, High Voltage & Medium Voltage O&M Engineering

Associate Electrical Engineer – Transmission and Distribution

Olsson

Location:United States , Kansas City, MO ▼Lincoln, NENorth Kansas City, MOOmaha, NEOverland Park, KS

Category:Energy

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:February 18, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Associate Electrical Engineer – Transmission and Distribution

Associate Operator, Distribution System

Associate Operator, Distribution System

Electrical Design Manager

Senior QC Engineer - Technical

Lead Power Systems Engineer

Engineer, Protection and Controls

Engineer, Protection and Controls

Manager, High Voltage & Medium Voltage O&M Engineering

Location:
United States , Kansas City, MO ▼
Lincoln, NE
North Kansas City, MO
Omaha, NE
Overland Park, KS

Category:
Energy

Contract Type:
Not provided

Job Posted:
February 18, 2026