Assembly Technician I- Night Job at Cactus Wellhead LLC (Hobbs)

O&M Technician I (Night shift)

The O&M Technician I performs a variety of operation and maintenance functions a...

Location

United States , Franklin Township

Salary:

26.00 - 28.00 USD / Hour

Veolia

Expiration Date

Until further notice

Requirements

High School Diploma/GED is required
Requires good reading, math, writing, scientific, and verbal communication skills
a mechanical aptitude
and the ability to read, interpret, and record data from meters, gauges, scales, panels, computer consoles, and other equipment
Must be able to obtain NJ T1 license within 18 months of hire
Must have and maintain a valid driver’s license with a safe driving record
The ability to perform tasks requiring standing and walking for extended periods of time
The ability to climb stairs, squat, and work with hands extended above head and in front of the body
Must be able to lift up to and carry 50 pounds
Requires close visual and hearing observation to detect non-conformance and machine malfunction

Job Responsibility

Operates equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures
Monitors and observes operating conditions, records observations and data in shift log
Diagnoses basic operational problems and takes corrective action per procedure
Performs routine CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment
Reports and documents results of work performed and enters into appropriate database
Promptly reports any operational problems with machines or equipment to Lead or Supervisor
Collects water, wastewater, industrial waste, groundwater, sludge, residuals and/or gas samples according to schedule
Performs field tests (chemical, physical and biological) in order to pace chemical dosages for process and odor control units
Prepares chemical solutions, monitors supplies and recommends reorder
Performs routine lab tests and prepares reports per procedure

What we offer

paid time off policies
health insurance
dental insurance
vision insurance
life insurance
savings accounts
tuition reimbursement
paid volunteering
employer sponsored 401(k) plan
up to 3% Annual Performance Bonus

Fulltime

Robot Service Technician (Night Shift)

Figure is an AI robotics company developing autonomous general-purpose humanoid ...

Location

United States , San Jose

Salary:

35.00 - 65.00 USD / Hour

Figure

Expiration Date

Until further notice

Requirements

3+ years experience working with complex systems
Familiarity with computer based tools such as but not limited to CMD prompt, Google Suite, in house development GUI's
Familiarity with electrical hardware based diagnostic tools such as but not limited to Scope, Digital MultiMeter, Current Probes
Familiarity with torque tools and mechanical assembly
Ability to read PCB and Harness schematics
Full system architecture diagnostic experience and organized diagnostic processes
Ability to remove and replace mechanical components up to 50lbs
Great attitude and excited to face challenges

Job Responsibility

Perform routine maintenance and inspections of the humanoid robot fleet
Proficient in troubleshooting mechanical, electrical and software-based issues
Work closely with engineering, build, validation and fabrication teams to resolve issues quickly
Maintain detailed and accurate records of all maintenance and repairs
Develop tools and document diagnostic procedures for process improvement
Occasional travel to customer or development partner sites
Ability to follow assembly documentation
Ability to work under short timelines when needed

Fulltime

Night Technician Supervisor

The role of a Facilities Night Supervisor is to lead and supervise the performan...

Location

United Kingdom , Minehead

Salary:

Not provided

Butlin's

Expiration Date

Until further notice

Requirements

NVQ L2 or equivalent experience in plumbing
NVQ L2 or equivalent experience in painting and decorating
NVQ L2 or equivalent experience in carpentry
Demonstratable experience of leading teams
Strong fault-finding and problem-solving skills
Ability to work independently and prioritise workload
Good communication and teamwork skills
Flexible approach to working hours and operational demands
Understand and interpret technical drawings/instructions/process
Experience of H & S Procedures & Requirements, COSHH, Risk Assessments etc

Job Responsibility

Lead and supervise the performance of the Out of hours facilities technician team
Carry out diverse maintenance and repair tasks in both the residential or commercial areas across the business
Provide co-ordination of immediate response out of hours across the resort, identifying issues, mitigating risk and implementing the escalation plan when required
Be the lead point of contact for out of hours contractors working on resort
Work closely with the Facilities assistant managers and Facilities managers to carry out planned strategic maintenance across resort
Fixing dripping taps, unblocking sinks and isolations
Fixing/replacing toilets, toilet cisterns and clearing drains
Replacing light fixtures, replacement of bulbs, fuses and the isolation of services
Hanging pictures/mirrors and location of case goods, preparing/replacement of door handles and ironmongery, installing shelves, curtain rails assembling furniture and basic cabinet works
Painting/decorating and mastic works to minor areas, preparation and making good to walls including filling, sanding and decoration

Parttime

Night Technician

The role of a Facilities technician Out of Hours is to perform diverse maintenan...

Location

United Kingdom , Minehead

Salary:

Not provided

Butlin's

Expiration Date

Until further notice

Requirements

Strong fault-finding and problem-solving skills
Ability to work independently and prioritise workload
Good communication and teamwork skills
Flexible approach to working hours and operational demands

Job Responsibility

Perform diverse maintenance and repair tasks in residential or commercial areas
Provide immediate response out of hours across the resort, identifying issues, mitigating risk and implementing the escalation plan
Fixing dripping taps, unblocking sinks, repairing door handles patching holes in walls
Replacing light fixtures, bulbs, and fuses
Hanging pictures, installing shelves, curtain rails assembling furniture and basic cabinet works
Fixing toilets, toilet cisterns and clearing drains
Painting and decorating minor areas, preparation and making good
Groundskeeping including basic gardening, cleaning gutters and changeable weather preparation
Ensure all tasks are carried out ensuring H&S requirements are met
Risk assessments are reviewed and adhered to

Fulltime

Engineering Technician - night shift

As an Engine Test Technician on the Product Development & Engineering team you w...

Location

United States , Fond du Lac

Salary:

53100.00 - 83800.00 USD / Year

Herbruck Poultry Ranch

Expiration Date

Until further notice

Requirements

High School diploma or GED equivalent is required (is preferred)
Extreme attention to detail for written logs and data documentation
Proficient with internal combustion engine disassembly, assembly, troubleshooting and general understanding of operation for evaluating test data
Proficient in the use of related precision tools and equipment (torque wrenches, borescopes, calipers)
Ability to remain calm, collected and highly effective in a very dynamic environment
Self-starter to keep engines on test and minimize downtime to meet to tight deadlines
Willingness to work overtime and pick up additional shifts with little advanced notice when needed

Job Responsibility

Conduct and monitor endurance engine testing for new and current products
Rig engines into test tanks, install and/or connect instrumentation for data collection
Perform engine maintenance for engine’s on test (oil change, valve lash, spark plugs, oil samples)
Install/remove outboard and inboard engine parts as required (gearcases, transmission, dives, cylinder heads, cams, exhaust, harnessing, sensors, etc)
Troubleshoot engine and ITC issues (electrical, mechanical, hydraulic)
Monitor test facility systems (tank water chemistry, tank and engine water supply, etc)
Fabricate/modify test fixtures, test parts, test props, etc
Document and report daily progress verbally and written within several different computer-based platforms
Follow precise engineering instructions and test procedures
Indoor Test Center facility/grounds cleaning and maintenance activities

What we offer

medical
dental
vision
paid vacation
401k (up to 4% match)
Health Savings Account (with company contribution)
wellbeing program
product purchase discounts

Fulltime

Robotic Welding Technician - Day & Night Shift

The Robotic Welding Technician is responsible for ensuring parts are processed i...

Location

United States , Blytheville

Salary:

Not provided

Lexicon, Inc

Expiration Date

Until further notice

Requirements

Minimum of five years Robotic Welding experience and/or college degree in Engineering or related field
Must have experience running an ABB 6-axis, MIG-welding robot
Must be proficient in reading and understanding blueprints
Must have at least three years welding experience
Must have strong math skills, and excellent verbal and written communication skills
Must be able to work independently and prioritize tasks
Must be able to handle multi-tasks with keen attention to detail and accuracy
Ability to lift up to 50 pounds frequently and push/pull up to 75 pounds occasionally
This position requires walking and standing for long periods of time throughout the day
Fast-paced work environment

Job Responsibility

Operate manual and/or robotic welding equipment
Safely apply welds per specifications to produce completed product
Produce assemblies of metal work pieces to quality and efficiency standards, including repetitive lifting and placing metal work pieces and sheets into fixtures
Measure dimensions of work pieces to ensure conformance using calipers, micrometers, height gages, templates, rulers, etc
Read check sheets and prints to determine specifications and accurately complete all required functions
Accurately document and maintain information in written or electronic form
Perform operator maintenance per established schedules
Safely complete finishing functions such as grinding, sanding, etc
Perform quality checks as prescribed and report issues to lead and/or supervisor
Modify computer-controlled robot movements

What we offer

Health Insurance
HSA with Employer contributions
Dental Insurance
Vision Insurance
Life Insurance
Disability Income Benefits
Paid Holidays
Paid Vacation
401 (k)

Fulltime

Instrument and Electrical (I&E) Technician

The Instrument and Electrical (I&E) technician position is responsible for safel...

Location

United States , Sergeant Bluff

Salary:

Not provided

CF Industries

Expiration Date

Until further notice

Requirements

Minimum H.S. diploma or GED
Completion of a formal apprenticeship program or equivalent combination of work experience and technical training required
Must have basic skills from several of the major standard industrial I & E skills including electrical AC/DC voltage, PLC, pneumatic control valves and systems, basic electronics, motor control systems and process control systems
Experience in 480 volt to 4160 volt electrical systems desired
Excellent communication and interpersonal skills
The job requires frequent standing, walking, climbing (ladders, stairs), and the ability to lift 80 lbs. occasionally
Microsoft Office software knowledge
The job occasionally requires overtime and call-outs on weekends, nights and holidays
Candidate must pass pre-employment screening examinations and assessments

Job Responsibility

Safely maintain, repair, and/or replace the physical equipment in the plant
Install, troubleshoot, service and perform preventative maintenance on plant equipment
Efficiently repair, or if necessary, replace the plant equipment
Install, service, test and calibrate high-voltage electrical systems and various other electronic equipment
Follow all safety rules and keep work areas in clean condition
Install, repair and maintain all process controls
analyzing systems and electrical systems
Dismantle, clean, replace parts, assemble and calibrate pneumatic and electronic instruments
Determine causes for malfunctioning instruments and take appropriate action to correct
Read electrical blueprints and schematics

Fulltime

Fleet Operations Technician

We’re searching for a Fleet Operations Technician to join our team. This role wi...

Location

United States , Aledo

Salary:

35.50 - 42.50 USD / Hour

Aurora Innovation

Expiration Date

Until further notice

Requirements

At least 3-6 years OEM Technician Experience
At least 2-4 years Diesel Technician / Diesel Mechanic Experience
Solid diagnostics chops
Valid US driver’s license
Demonstrate knowledge of basic workshop etiquette, provide verbal and writing communication across all teams
Safety conscious and knowledge of general shop safety
Basic Knowledge of DOT and CVSA rules and requirements
Ability to lift up to 50 pounds
Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and/or sit frequently throughout the duration of the day
Ability to work independently with minimal supervision

Job Responsibility

Work closely with Vehicle Operations, Software, and Hardware performing diagnostics, test-plans, and vehicle upgrades
Perform routine OEM maintenance to complex mechanical and electrical repairs
Document and communicate findings through process and systems
Take ownership and escalate data or findings when appropriate
Perform quality service and repair, work cross functionally, and bring a can-do team spirit
Maintain a clean and professional workspace
Capable of balancing and prioritizing multiple tasks
Mechanical aptitude: Assemble or build parts or jigs for prototypes, proficiency with mechanical fabrication (drill press, saws, hand tools, etc.)
Testing procedures: Build and setup test rigs for mechanical and/or electrical tests across multiple teams (Hardware, Systems, Devs...etc.)
Provides feedback, creates and implements processes and suggestions to new and/or improved workshop standards, protocols, and processes.

What we offer

Base hourly wage
Annual bonus
Equity compensation
Benefits

Fulltime

Select Country

Assembly Technician I- Night

Job Description

Job Responsibility

Requirements

Looking for more opportunities?